Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

gelöst V15 in Oscam: "card system not supported"

    Nobody is reading this thread right now.
S

StefanDortmund

Ist gelegentlich hier
Registriert
29. März 2014
Beiträge
48
Reaktionspunkte
35
Punkte
38
Hallo! :smile:

Gestern habe ich eine V15 erhalten, die ich jedoch in oscam-1.20_svn11537-797-i686-pc-cygwin-ssl-libusb per Easymouse nicht zum Laufen bekomme. Meine V14 läuft darin problemlos.

3.3V
Phoenix
3.58MHz

[reader]
label = V15
protocol = mouse
device = /dev/ttyS3
autospeed = 0
caid = 098D
boxid = 12345678
boxkey = 1122334455667788
ins7e11 = 11
detect = cd
mhz = 600
group = 1
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
disablecrccws = 1

2019/09/15 10:47:46 0BF4909B r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 10:47:46 0BF4909B r (reader) V15 [mouse] Setting baudrate to 64516 bps
2019/09/15 10:47:47 0BF4909B r (reader) V15 [mouse] Warning: needed try nr 2, next ECM has some delay
2019/09/15 10:47:47 0BF4909B r (reader) V15 [mouse] card system not supported
2019/09/15 10:47:47 0BF4909B r (reader) V15 [mouse] Normal mode failed, reverting to Deprecated Mode
2019/09/15 10:47:48 0BF4909B r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 10:47:49 0BF4909B r (reader) V15 [mouse] Warning: needed try nr 2, next ECM has some delay
2019/09/15 10:47:49 0BF4909B r (reader) V15 [mouse] card system not supported
2019/09/15 10:47:49 0BF4909B r (reader) V15 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2019/09/15 10:47:49 0BF4909B r (reader) V15 [mouse] card initializing error

Der ATR sieht okay aus - ich wundere mich, warum dann "card system not supported" kommt. Die Version sollte doch V15 unterstützen(?)

Hat jemand Ideen, woran es liegen könnte / wie ich das Problem beheben kann?

Vielen Dank im Voraus! :smile:
 
Ist die Karte eingebucht?
Kannst es im Chat versuchen.
Ich hab folgender oscam.server
Code: 
[reader]
label                         = v15
protocol                      = mouse
device                        = /dev/ttyUSB3
caid                          = 098D
boxid                         = 12345678
ins7e11                       = 15
detect                        = cd
mhz                           = 600
group                         = 1
emmcache                      = 1,3,10,0
blockemm-unknown              = 1
blockemm-u                    = 1
blockemm-s                    = 1
blockemm-g                    = 1
saveemm-u                     = 1
ndsversion                    = 2
 
Das ganze läuft unter Windows (cygwin), ich habe nie verstanden, weshalb in der config mhz=600 steht, die Maus aber auf 3,58MHz. Jedoch läuft es so mit der V14, und mit der V15 bekomme ich zumindest einen korrekten ATR. Ich verstehe nur nicht, warum dann "card system not supported" kommt. Unterstützen die cygwin-Versionen die V15 nicht? Oder liegt es daran, dass die Karte neu & unbenutzt ist? Aber selbst dann sollte doch Oscam zumindest die Serial lesen können(?)

@xosajin: Sorry, was meinst Du mit "eingebucht"? Und was sollte ich in welchem Chat versuchen?
 
@xosajin: Alle V15 (die nicht defekt sind) müssten doch prinzipiell inkl. Serial per Oscam lesbar sein - auch ohne dass ich eine Aktivierung anstoßen müsste

Ich habe aber gerade ein interessantes Phänomen festgestellt: Ich bekomme mit der V14 das gleiche Problem, wenn ich in oscam.server mhz auf 357 stelle (mit 600 funktioniert es, obwohl die Maus auf 357 arbeitet).

Hier mal zum Vergleich:

2019/09/15 11:41:08 37521657 r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2019/09/15 11:41:08 37521657 r (reader) V15 [mouse] Setting baudrate to 64516 bps
2019/09/15 11:41:10 37521657 r (reader) V15 [mouse] Card type: P1TV
2019/09/15 11:41:10 37521657 r (reader) V15 [mouse] Rom version: 20AA
2019/09/15 11:41:10 37521657 r (reader) V15 [mouse] Credit available on card: 0 euro
2019/09/15 11:41:10 37521657 r (reader) V15 [mouse] Extended 4C detected
2019/09/15 11:41:10 37521657 r (reader) V15 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 11
2019/09/15 11:41:10 37521657 r (reader) V15 [mouse] found card system videoguard2
2019/09/15 11:41:10 37521657 r (reader) V15 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
2019/09/15 11:41:10 37521657 r (reader) V15 [videoguard2] card detected
2019/09/15 11:41:10 37521657 r (reader) V15 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2019/09/15 11:41:11 37521657 r (reader) V15 [mouse] ATR: 3F FD 11 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2019/09/15 11:41:11 37521657 r (reader) V15 [mouse] Setting baudrate to 16129 bps
2019/09/15 11:41:13 37521657 r (reader) V15 [mouse] Card type: P1TV
2019/09/15 11:41:13 37521657 r (reader) V15 [mouse] Rom version: 20AA
2019/09/15 11:41:13 37521657 r (reader) V15 [mouse] Credit available on card: 0 euro
2019/09/15 11:41:13 37521657 r (reader) V15 [mouse] Extended 4C detected
2019/09/15 11:41:14 37521657 r (reader) V15 [mouse] FuseByte: 05

2019/09/15 11:43:22 37521657 r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 11:43:22 37521657 r (reader) V15 [mouse] Setting baudrate to 64516 bps
2019/09/15 11:43:23 37521657 r (reader) V15 [mouse] Warning: needed try nr 2, next ECM has some delay
2019/09/15 11:43:23 37521657 r (reader) V15 [mouse] card system not supported
2019/09/15 11:43:23 37521657 r (reader) V15 [mouse] Normal mode failed, reverting to Deprecated Mode
2019/09/15 11:43:25 37521657 r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 11:43:26 37521657 r (reader) V15 [mouse] Warning: needed try nr 2, next ECM has some delay
2019/09/15 11:43:26 37521657 r (reader) V15 [mouse] card system not supported
2019/09/15 11:43:26 37521657 r (reader) V15 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2019/09/15 11:43:26 37521657 r (reader) V15 [mouse] card initializing error

Weiß jemand, was da los ist?
 
Danke, das habe ich probiert, jedoch keine Änderung... Hier mal detailliertere Logs zum Vergleich zwischen funktionierender V14 und nicht funktionierender V15:

2019/09/15 12:11:11 06CD193D r (reader) V15 [mouse] card detected
2019/09/15 12:11:11 06CD193D r (reader) V15 [mouse] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2019/09/15 12:11:11 2E00C90C r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2019/09/15 12:11:12 2E00C90C r (-) -- Skipped 1 duplicated log lines --
2019/09/15 12:11:12 06CD193D r (-) -- Skipped 1 duplicated log lines --
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] TA1=13 TB1=25 TC1=02 TD1=50 (T0)
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] TA2=80 TC2=0F no TD2 means T0
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] 1 protocol types detected. Historical bytes: 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] Specific mode: T0, F=372, D=4, N=2
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] Setting baudrate to 64516 bps
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] Calculated work ETU is 15.50 us reader mhz = 600
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] Protocol: T=0, WWT=57600, Clockrate=6000000
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] Setting timings: timeout=57600 ETU, block_delay=0 ETU, char_delay=14 ETU
2019/09/15 12:11:12 06CD193D r (reader) V15 [mouse] Card succesfully activated
2019/09/15 12:11:13 2E00C90C r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2019/09/15 12:11:13 06CD193D r (-) -- Skipped 1 duplicated log lines --
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] passed history check
2019/09/15 12:11:13 06CD193D r TA1 = 13
2019/09/15 12:11:13 06CD193D r FI = 01
2019/09/15 12:11:13 06CD193D r TA1 = 12
2019/09/15 12:11:13 06CD193D r FI = 01
2019/09/15 12:11:13 06CD193D r TA1 = 13
2019/09/15 12:11:13 06CD193D r FI = 01
2019/09/15 12:11:13 06CD193D r TA1 = 13
2019/09/15 12:11:13 06CD193D r FI = 01
2019/09/15 12:11:13 06CD193D r TA1 = 11
2019/09/15 12:11:13 06CD193D r FI = 01
2019/09/15 12:11:13 06CD193D r TA1 = 11
2019/09/15 12:11:13 06CD193D r FI = 01
2019/09/15 12:11:13 06CD193D r TA1 = 11
2019/09/15 12:11:13 06CD193D r FI = 01
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] type: VideoGuard Sky Austria/Germany (098C), baseyear: 2004
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] forced to NDS2
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] write to cardreader
2019/09/15 12:11:13 06CD193D r (reader) D0 74 01 80 01
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] Answer from cardreader:
2019/09/15 12:11:13 06CD193D r (reader) AC 90 00
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] write to cardreader
2019/09/15 12:11:13 06CD193D r (reader) D0 74 01 00 AC
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] Answer from cardreader:
2019/09/15 12:11:13 06CD193D r (reader) 01 AA 2A 01 D0 02 08 03 D0 04 01 01 D0 06 01 03
2019/09/15 12:11:13 06CD193D r (reader) D0 0E FF 02 D0 12 FF 02 D0 1E 09 03 D0 2E FF 00
2019/09/15 12:11:13 06CD193D r (reader) D0 32 01 01 D0 36 FF 02 D0 38 02 03 D0 40 FF 00
2019/09/15 12:11:13 06CD193D r (reader) D0 42 FF 00 D0 46 FF 00 D0 4A FF 00 D0 4C 0E 01
2019/09/15 12:11:13 06CD193D r (reader) D0 4E 05 03 D0 50 FF 02 D0 54 4E 03 D0 58 4A 03
2019/09/15 12:11:13 06CD193D r (reader) D0 5A FF 02 D0 5C 04 03 D0 5E FF 02 D0 70 26 03
2019/09/15 12:11:13 06CD193D r (reader) D0 72 28 03 D0 74 FF 02 D0 76 18 03 D0 78 18 03
2019/09/15 12:11:13 06CD193D r (reader) D0 7A FF 00 D0 7C FF 02 D0 7E FF 00 D0 B4 40 01
2019/09/15 12:11:13 06CD193D r (reader) D0 B8 10 01 D0 BC 60 03 D0 BE 30 03 D0 D2 FF 02
2019/09/15 12:11:13 06CD193D r (reader) D0 D4 FF 00 D0 E0 FF 02 D0 E2 FF 02 D0 E4 FF 00
2019/09/15 12:11:13 06CD193D r (reader) D0 E6 FF 00 D0 E8 FF 02 D0 EC FF 00 90 00
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] write to cardreader
2019/09/15 12:11:13 06CD193D r (reader) D0 02 00 00 08
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] Answer from cardreader:
2019/09/15 12:11:13 06CD193D r (reader) 50 31 54 56 02 00 41 41 90 00
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] Card type: P1TV
2019/09/15 12:11:13 06CD193D r (reader) V15 [mouse] Rom version: 20AA

2019/09/15 12:09:37 06CD193D r (reader) V15 [mouse] card detected
2019/09/15 12:09:37 06CD193D r (reader) V15 [mouse] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
2019/09/15 12:09:37 2E00C90C r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2019/09/15 12:09:38 06CD193D r (-) -- Skipped 1 duplicated log lines --
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] TA1=13 TB1=25 TC1=02 TD1=50 (T0)
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] TA2=80 TC2=0F no TD2 means T0
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] 1 protocol types detected. Historical bytes: 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] Specific mode: T0, F=372, D=4, N=2
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] Setting baudrate to 64516 bps
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] Calculated work ETU is 15.50 us reader mhz = 600
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] Protocol: T=0, WWT=57600, Clockrate=6000000
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] Setting timings: timeout=57600 ETU, block_delay=0 ETU, char_delay=14 ETU
2019/09/15 12:09:38 06CD193D r (reader) V15 [mouse] Card succesfully activated
2019/09/15 12:09:39 2E00C90C r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2019/09/15 12:09:39 06CD193D r (-) -- Skipped 1 duplicated log lines --
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] passed history check
2019/09/15 12:09:39 06CD193D r TA1 = 13
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 12
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 13
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 13
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 11
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 11
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 11
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] type: VideoGuard Sky Austria/Germany (098D), baseyear: 2004
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] forced to NDS2
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] write to cardreader
2019/09/15 12:09:39 06CD193D r (reader) D0 74 01 80 01
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] Warning: needed try nr 2, next ECM has some delay
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] failed to read 7401 cmd length (00 00)
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] passed history check
2019/09/15 12:09:39 06CD193D r TA1 = 13
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 12
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 13
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 13
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 11
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 11
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r TA1 = 11
2019/09/15 12:09:39 06CD193D r FI = 01
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] card system not supported
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] Normal mode failed, reverting to Deprecated Mode
2019/09/15 12:09:40 2E00C90C r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] ATR: 3F FD 13 25 02 50 80 0F 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] TA1=13 TB1=25 TC1=02 TD1=50 (T0)
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] TA2=80 TC2=0F no TD2 means T0
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] 1 protocol types detected. Historical bytes: 55 B0 02 69 FF 4A 50 F0 80 00 50 31 03
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] Specific mode: T0, F=372, D=4, N=2
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] Calculated work ETU is 62.00 us reader mhz = 600
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] Protocol: T=0, WWT=14400, Clockrate=6000000
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] Setting timings: timeout=14400 ETU, block_delay=0 ETU, char_delay=14 ETU
2019/09/15 12:09:41 06CD193D r (reader) V15 [mouse] Card succesfully activated
2019/09/15 12:09:41 2E00C90C r (reader) emulator [emu] cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] passed history check
2019/09/15 12:09:42 06CD193D r TA1 = 13
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 12
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 13
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 13
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 11
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 11
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 11
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] type: VideoGuard Sky Austria/Germany (098D), baseyear: 2004
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] forced to NDS2
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] write to cardreader
2019/09/15 12:09:42 06CD193D r (reader) D0 74 01 80 01
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] Warning: needed try nr 2, next ECM has some delay
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] failed to read 7401 cmd length (00 00)
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] passed history check
2019/09/15 12:09:42 06CD193D r TA1 = 13
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 12
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 13
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 13
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 11
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 11
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r TA1 = 11
2019/09/15 12:09:42 06CD193D r FI = 01
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] card system not supported
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max allotted of 1
2019/09/15 12:09:42 06CD193D r (reader) V15 [mouse] card initializing error

Offenbar reagiert die V15 gar nicht auf D0 74 01 80 01, das Oscam schickt(?)
 
Hast du die Box auch komplett vom Strom genommen nach der Änderung?
 
Es ist keine Box, es ist Oscam unter Windows 7 (cygwin) mit Easymouse. Ich habe nach den Änderungen (ins7e raus) Karte gezogen, Oscam beendet, Easymouse vom USB-Port gezogen und wieder angeschlossen, Oscam gestartet, Karte reingesteckt - weiterhin das gleiche Ergebnis. Ich habe hier leider auch keine andere Config (Linux-Receiver) zum Testen. Aber es ist doch komisch, dass die V14 problemlos funktioniert, die V15 jedoch nicht(?) Oder kann es sein, dass die V15 nur z.B. in einem Fast Mode läuft und der von Oscam unter Windows nicht unterstützt wird? Andererseits sollte die V15 doch zumindest auf D0 74 01 80 01 reagieren(?)
 
StefanDortmund schrieb:
Aber es ist doch komisch, dass die V14 problemlos funktioniert, die V15 jedoch nicht(?)
Zum Vergrößern anklicken....
manche oscams zicken bei der v15. probiers doch mal mit einer ganz neuen oscam, wo garantiert auch der v15 support drin ist (schau ins changelog)

StefanDortmund schrieb:
2019/09/15 12:09:39 06CD193D r (reader) V15 [mouse] Warning: needed try nr 2, next ECM has some delay
Zum Vergrößern anklicken....
diese meldung hab ich noch nie gesehen. vielleicht solltest du auch mal oscam.conf oscam.user und oscam.dvbapi posten....
 
Zuletzt bearbeitet:
Das ist die neueste Oscam, die ich für Windows (cygwin) bekommen konnte - r11537-797, ist vom Juli, die sollte V15 unterstützen. Das Problem scheint ja auch eher zu sein, dass die Karte einfach nicht auf o.g. Kommando reagiert.



Mit denen sollte es eig. nichts zu tun haben(?), denn die V14 läuft ja.

So langsam habe ich das Gefühl, dass Sky mir hier aus Versehen entweder eine totale Blanko-V15 (die nach dem ATR erst noch mit allen weiteren Infos beschrieben werden müsste) geschickt hat, denn ich logge seit Tagen den EMM-Stream (PID 1008) und finde darin EMMs für meine V14, aber keine einzige EMM für die V15, und im Kundencenter ist die V15 auch nicht aufgeführt... Oder Sky hat mir eine defekte/deaktivierte V15 geschickt.
 
Zuletzt bearbeitet von einem Moderator:
Okay, für den Fall, dass das sarkastisch gemeint war ;-) - und falls es doch hilft:

[global]
logfile = oscam.log
fallbacktimeout = 2000
nice = -1
maxlogsize = 100
preferlocalcards = 1
cwlogdir = 0
failbantime = 5
failbancount = 3

[cache]

[cccam]
port = 12002
nodeid = AB............84
version = 2.2.1
reshare = -1
recv_timeout = 4000

[streamrelay]

[dvbapi]
enabled = 1
pmt_mode = 4
listen_port = 11500
user = DVBAPI
read_sdt = 1
write_sdt_prov = 1
boxtype = pc

oscam.user und oscam.dvbapi gibt's im gleichen Ordner nicht.
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

B
gelöst Nach Wechsel von OATV 7.3 -> 7.5.1 keine HD Entschlüsselung mehr
2 3
Antworten
35
Aufrufe
1K
Basti16
B
V15 Mit OSCAM
Antworten
14
Aufrufe
5K
DVB-T2 HD
D
O
gelöst HD02 Karte läuft nicht mehr (T1 RSYNC Error)
Antworten
2
Aufrufe
562
onkel-tobi
O
W
gelöst OSCAM ORF Anfänger-Probleme
2
Antworten
24
Aufrufe
3K
tom00tom
gelöst [gelöst]: Cardreader Omnikey 3121 -mit HD05 Karte "card system not supported"
4 5 6
Antworten
80
Aufrufe
8K
grobygmx
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…