V14 Zeiten im Internen Reader verbessern ???

[sammax]

Hallo Zusammen,

folgendes Szenario

Ich habe ne V14

nur habe ich zeiten ohne Clienten von 235ms gehabt...

habe den eintrag

ins7e11 = 15

gemacht und habe nun zeiten von ca 195 ms


betreibe das ganze im Internen Reader meines Receivers...

trotzdem sind die zeiten zu hoch oder geht da nicht weniger???

meine server einstellungen sind hier zu sehen

Spoiler

[reader]
label = v14
description = V14
protocol = internal
device = /dev/sci0
ins7e11 = 15
caid = 098C
boxid = 12345678
detect = cd
mhz = 600
cardmhz = 368
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1....

welche einstellungen würden denn noch was bei mir bringen ????

:JC_hmmm:

Danke schonmal für euer Fachwissen

MfG

 

[Alex]

AW: V14 Zeiten im Internen Reader verbessern ???

Von den Configs her ist da wohl alles soweit ausgereizt in der oscam.server. Es scheint so, als taugt dein interner Reader schlicht nichts.
Grad mal in meiner VU+ solo² getestet:

Spoiler

2015/06/25 12:19:23 0060DBD0 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1833 ECM_PID: 18B6 PROVID: 000000
2015/06/25 12:19:23 0060DBD0 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 09C4 ECM_PID: 1BB6 PROVID: 000000
2015/06/25 12:19:23 0060DBD0 c (dvbapi) Demuxer 0 ecmpid 2 CAID: 09AF ECM_PID: 1FB6 PROVID: 000000
2015/06/25 12:19:23 0060DBD0 c (dvbapi) Demuxer 0 ecmpid 3 CAID: 098C ECM_PID: 1AB6 PROVID: 000000
2015/06/25 12:19:23 0060DBD0 c (dvbapi) Demuxer 0 found 4 ECMpids and 4 STREAMpids in PMT
2015/06/25 12:19:23 0060DBD0 c (dvbapi) Demuxer 0 serving srvid 0083 (Sky Cinema HD) on adapter 0000 camask 0001 index 0000 pmtpid 0064
2015/06/25 12:19:23 0060DBD0 c (dvbapi) Demuxer 0 trying to descramble PID 3 CAID 098C PROVID 000000 ECMPID 1AB6 ANY CHID PMTPID 0064 VPID 04FF
2015/06/25 12:19:23 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:5D037E60179D0E4C04FC550E6605C484): found (75 ms) by sky - Sky Cinema HD
2015/06/25 12:19:26 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:0B0F61356660ED73346C82964760335D): found (75 ms) by sky - Sky Cinema HD
2015/06/25 12:19:33 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:03AC3EBEEC3C0E647D996C9FD546ADCB): found (75 ms) by sky - Sky Cinema HD
2015/06/25 12:19:40 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:301CB74DB6B8F594D2A8013026FED7B0): found (75 ms) by sky - Sky Cinema HD
2015/06/25 12:19:47 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:AC2BD050B4F964A81F020D33AA27F816): found (75 ms) by sky - Sky Cinema HD
2015/06/25 12:19:54 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:D15F0508ADEC2385430860DB21D4CFFB): found (76 ms) by sky - Sky Cinema HD
2015/06/25 12:20:01 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:3D8C8C7714CEA460C5F68C6C8041CF85): found (76 ms) by sky - Sky Cinema HD
2015/06/25 12:20:08 0060DBD0 c (ecm) dvbapi (098C@000000/025B/0083/98:C7AEC3CAFBFF0528016A8BEB31474379): found (75 ms) by sky - Sky Cinema HD

 

[sammax]

AW: V14 Zeiten im Internen Reader verbessern ???

ähhh, ist ja richtig blöd.... ich werde mal ne andere box aus dem keller holen und damit testen....

MfG

 

[mrwong]

AW: V14 Zeiten im Internen Reader verbessern ???

also in meiner 7020 hd

um die 72 - 78 ms v14

wird wohl echt an deinem resi liegen

 

[sisko1701]

AW: V14 Zeiten im Internen Reader verbessern ???

Ich hab mit meiner Vu+ Solo2 um die 75ms.

 

[vubueffel]

AW: V14 Zeiten im Internen Reader verbessern ???

Ich 88ms mit ins7e11 = 14
Vu+ solo 2

gesendet mit Tapatalk

 

[MM§]

AW: V14 Zeiten im Internen Reader verbessern ???

Sonst besorge dir für ca. 20€ einen Easymouse2 USB Premium. Dieser Kartenleser wird über USB angeschlossen und ist sogar noch schneller als alle internen Kartenleser.

 

[sodex]

AW: V14 Zeiten im Internen Reader verbessern ???

ist allgemein bekannt, das die Kartenleser der eco+ den Fastmode nicht richtig unterstützen

MfG sodex

 

[sammax]

AW: V14 Zeiten im Internen Reader verbessern ???

hi,

ach so ist das, naja dann nutze ich dafür mal ne andere Kiste, und werde es dort testen, danke !

MfG

 

[sammax]

AW: V14 Zeiten im Internen Reader verbessern ???

hab jetzt ne olle venton unibox HD1 aus dem Keller geholt


zeiten sehen nun so aus im homesharing....

Spoiler

2015/06/26 09:22:33 543038 c dvbapiau (098C&000000/1069/157F/98:3EDE2A78546CABE736E4DA930171E6A3): rejected group (3 ms) (no matching reader)
2015/06/26 09:22:33 543038 c dvbapiau (098C&000000/1069/157F/98:3EDE2A78546CABE736E4DA930171E6A3): found (125 ms) by homeshare
2015/06/26 09:22:39 543038 c dvbapiau (098C&000000/1069/157F/98:60A9F5894EE8AAA43F0D82A441B4F2EA): found (126 ms) by homeshare
2015/06/26 09:22:46 543038 c dvbapiau (098C&000000/1069/157F/98:7DCFE5681CFBE18DD54792435AD15DDC): found (126 ms) by homeshare
2015/06/26 09:22:53 543038 c dvbapiau (098C&000000/1069/157F/98:B0D6090B3EF2AFBB6679EFF778DA747B): found (126 ms) by homeshare
2015/06/26 09:23:00 543038 c dvbapiau (098C&000000/1069/157F/98:26787A038E39B356C53C4FA9821667B2): found (126 ms) by homeshare
2015/06/26 09:23:07 543038 c dvbapiau (098C&000000/1069/157F/98:15BAE58EFA60CF12F8F718534D010C9C): found (125 ms) by homeshare
2015/06/26 09:23:14 543038 c dvbapiau (098C&000000/1069/157F/98:E01E063CA892085EAF5D7064EED249AC): found (126 ms) by homeshare
2015/06/26 09:23:21 543038 c dvbapiau (098C&000000/1069/157F/98:1071C7EB4A7426869DE66633AB2544A3): found (126 ms) by homeshare
2015/06/26 09:23:28 543038 c dvbapiau (098C&000000/1069/157F/98:9B24D3FEE4C7D56F9B680E927C8AD41E): found (126 ms) by homeshare
2015/06/26 09:23:35 543038 c dvbapiau (098C&000000/1069/157F/98:F0D56ECD3FFFBB853AFE1B24379692DB): found (126 ms) by homeshare
2015/06/26 09:23:42 543038 c dvbapiau (098C&000000/1069/157F/98:8449A52018917DE1E324DCA7EF2684D6): found (127 ms) by homeshare
2015/06/26 09:23:49 543038 c dvbapiau (098C&000000/1069/157F/98:CAA411BBBD45CAAEC4FBEA713286172D): found (126 ms) by homeshare
2015/06/26 09:23:56 543038 c dvbapiau (098C&000000/1069/157F/98:A711A0E2CCD70E157D6C56AEB1E8A00A): found (126 ms) by homeshare
2015/06/26 09:24:04 543038 c dvbapiau (098C&000000/1069/157F/98:A624F6DB561E324E54047F1A5D440DF6): found (136 ms) by homeshare
2015/06/26 09:24:11 543038 c dvbapiau (098C&000000/1069/157F/98:55AC73223656223B0E3AA67B335A06B9): found (126 ms) by homeshare
2015/06/26 09:24:18 543038 c dvbapiau (098C&000000/1069/157F/98:4858583B5A2460C70BDCCB8F1AE1C955): found (125 ms) by homeshare
2015/06/26 09:24:25 543038 c dvbapiau (098C&000000/1069/157F/98:07DC6E08D24EC131CC0C591D7A9A54DC): found (125 ms) by homeshare
2015/06/26 09:24:32 543038 c dvbapiau (098C&000000/1069/157F/98:55768DDB1F6DF7517D5473AE0177FB6C): found (126 ms) by homeshare

meint ihr nun das da noch was geht mit fastmode oder was es so gibt ???

mein server sieht so aus...

Spoiler

[reader]
label = sky_v14_card
description = V14
protocol = internal
device = /dev/sci0
key = 0102030405060708091011121314
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1

wenn ich hier dieses ins7e11 = 15

reinmache sagt er mir nur no entitlements.. und nix geht mehr...

heißt das es geht nicht mehr.. 120 ms okay ???

Mfg

 

[plex_77]

AW: V14 Zeiten im Internen Reader verbessern ???

Hi,

lösche bitte diese Zeile raus:
key = 0102030405060708091011121314

und füge dies hinzu:
ins7e11 = 15
ndsversion = 2

receiver komplett neustarten und dann ein log vom Oscam neustart.

 

[sisko1701]

AW: V14 Zeiten im Internen Reader verbessern ???

Meiner sieht so aus, und damit hab ich Zeiten um 75ms

Spoiler

[reader]
label = SKY_DE_V1X
description = V13 or V14 (NDS)
protocol = internal
device = /dev/sci1
caid = 09C4,098C
boxid = 12345678
ins7e11 = 14
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,2,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

 

[sammax]

AW: V14 Zeiten im Internen Reader verbessern ???

wenn ich dieses ins7 reinmache passiert halt das ich nur noch no entitlements angezeigt bekomme..... key hab ich rausgenommen

hier der log

Spoiler

• 2015/06/26 09:42:29 77308C68 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:42:29 77308C68 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:42:29 77308C68 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:29 77308C68 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:42:30 77308C68 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:42:30 77202FB8 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0F 41xxxxxxxxxx 31 03
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:42:31 77202FB8 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:42:31 5400E0 c homeshare (098C&000000/1069/157F/98:77C2D1651B2A04EC077E28501DDF46B3): rejected group (0 ms) (no matching reader)
• 2015/06/26 09:42:34 77202FB8 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:35 77202FB8 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:42:36 77202FB8 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:42:36 77306290 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:42:37 77306290 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80xxxxxxx0 00 50 31 03
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:42:37 77306290 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:42:40 77306290 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:42:40 535CE0 c encrypted cccam-client xxx.xxx.xxx.xx rejected (invalid access)
• 2015/06/26 09:42:40 535CE0 c account 'outsiderdeb' not found!
• 2015/06/26 09:42:40 535CE0 c anonymous disconnected from xxx.xxx.xxx.xx
• 2015/06/26 09:42:41 77306290 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:42:41 77306290 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:42:41 77306290 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:42:41 77306290 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:42:41 77306290 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:42:41 77306290 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:42:41 77306290 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:42:41 77306290 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:41 77306290 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:42:42 77306290 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:42:42 7720C700 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] ATR: 78 Fxxxxxxxxx
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0F xxxxxxxx 50 F0 00 00 50 31 03
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:42:43 7720C700 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:42:46 7720C700 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:47 7720C700 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:42:48 7720C700 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:42:48 77308C68 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0xxxxxxxxx31 03
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:42:49 77308C68 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:42:52 77308C68 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:53 77308C68 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:42:54 77308C68 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:42:54 77202FB8 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0F 41xxxxxxxxx3
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:42:55 77202FB8 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:42:58 77202FB8 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:42:59 77202FB8 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:43:00 77202FB8 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:43:00 77306290 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:43:01 77306290 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0F xxxxxxxx0 00 50 31 03
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:43:01 77306290 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:43:02 5400E0 c homeshare (098C&000000/1069/157F/98:01C893CBCE024A075726B8F20C445500): rejected group (0 ms) (no matching reader)
• 2015/06/26 09:43:04 77306290 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:43:05 77306290 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:43:05 77306290 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:43:05 77306290 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:43:05 77306290 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:43:05 77306290 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:43:05 77306290 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:43:05 77306290 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:43:05 77306290 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:05 77306290 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:43:06 77306290 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:43:06 7720C700 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80xxxxxxxx0 50 31 03
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:43:07 7720C700 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:43:10 7720C700 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:11 7720C700 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:43:11 535CE0 c encrypted cccam-client xxx.xxx.xxx.xx rejected (invalid access)
• 2015/06/26 09:43:11 535CE0 c account 'outsiderdeb' not found!
• 2015/06/26 09:43:11 535CE0 c anonymous disconnected from xxx.xxx.xxx.xx
• 2015/06/26 09:43:12 7720C700 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:43:12 77308C68 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0Axxxxxxxxx
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:43:13 77308C68 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:43:16 77308C68 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:17 77308C68 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:43:18 77308C68 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:43:18 77202FB8 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 xxxxxxx03
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:43:19 77202FB8 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:43:22 77202FB8 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:23 77202FB8 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:43:24 77202FB8 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:43:24 77505EF0 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] ATR: 78xxxxxxx
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 8xxxxxxxx50 31 03
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:43:25 77505EF0 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500
• 2015/06/26 09:43:28 77505EF0 r sky_v14_card [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [internal] Card type: P1TV
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [internal] Rom version: 20AA
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [internal] Credit available on card: 0 euro
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [internal] Extended 4C detected
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [internal] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [internal] found card system videoguard2
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:29 77505EF0 r sky_v14_card [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2015/06/26 09:43:30 77505EF0 r sky_v14_card [videoguard2] creating thread for device /dev/sci0
• 2015/06/26 09:43:30 77208950 r sky_v14_card [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2015/06/26 09:43:31 77208950 r sky_v14_card [videoguard2] card detected
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] ATR: 78 F0 48 21 81 00
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] ERROR: Could not read reader->convention
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] Error activating card.
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] Doing fast reset
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] ATR: 3F FD 13 25 02 50 80 0F 41 xxxxx
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
• 2015/06/26 09:43:31 77208950 r sky_v14_card [internal] Calculated work ETU is 18.60 us reader mhz = 500

 

[pehedima]

AW: V14 Zeiten im Internen Reader verbessern ???

Nach dem Einstellen des Fastmodes (ins7e11 = 15) wird deine Karte nicht mehr korrekt gelesen.
Daher erstmal bei ins7e11 = 13 bleiben.

 

[sammax]

AW: V14 Zeiten im Internen Reader verbessern ???

13 ist standard oder wie ??, jedenfalls bringt es nichts wenn ich den eintrag mache....

MfG