V14 und HD01

sekiz · 25. Mai 2014

Komme nicht weiter habe eine V14 und HD01. Die HD01 rennt, aber die V14 nicht. Da kommt immer im OScam Webif im LiveLog folgende Meldung:

2014/05/25 10:38:15 56C358 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/05/25 10:38:15 56C358 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Oscam Config sehen folgt aus:

oscam.conf

[global]
logfile = /var/cache/oscam.log
disableuserfile = 0
#clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1
waitforcards = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
decodeforever = 1

[webif]
httpport = 17001
httpuser = userosif
httppwd = passosif
httprefresh = 10
httpallowed = 127.0.0.1,190.168.0.0-190.168.255.255

[cache]
delay = 120

oscam.dvbapi

P:089C
P:1830

oscam.server

[reader]
label = skyV14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
cardmhz = 2700
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
saveemm-u = 1
ndsversion = 2

[reader]
label = hd01
protocol = internal
device = /dev/sci1
caid = 1830
rsakey = x
boxkey = x
detect = cd
ecmwhitelist = 1830:92
autospeed = 1
cardmhz = 2700
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2
auprovid = 003411

oscam.user

[account]
user = local
au = 1
pwd = 12121212
caid = 1833,1702,1830
group = 2
betatunnel = 1833.FFFF:1702

[account]
user = lokal
au = V14
group = 1

waves · 25. Mai 2014

AW: Freischaltung der "neuen" V14 mit OScam

sekiz schrieb:
oscam.user

[account]
user = local
au = 1
pwd = 12121212
caid = 1833,1702,1830
group = 2
betatunnel = 1833.FFFF:1702

[account]
user = lokal
au = V14
group = 1

oscam.dvbapi

P:089C
P:1830

Das Rot markierte ist definitiv falsch für eine V14.

caid = 098C,1830

und ein Betatunnel geht nicht bei NDS Karten, also raus.

Mach mal einen eigenen Thread auf, und poste einen kompletten Startlog dazu!

sekiz · 25. Mai 2014

AW: Freischaltung der "neuen" V14 mit OScam

@waves

bevor ich es falsch mache wo soll ich Thread auf machen? und wo finde ich den Startlog?

aktuell sieht es so aus

2014/05/25 11:15:28 56C8C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/05/25 11:15:28 56C8C8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/05/25 11:15:29 56C8C8 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (2 ms) (invalid caid 0x1833)
2014/05/25 11:15:29 56C8C8 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (1 ms) (invalid caid 0x1833)
2014/05/25 11:15:29 56C8C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 11:15:29 56C8C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0F PMTPID 0063 (NO MATCHING READER)

waves · 25. Mai 2014

AW: Freischaltung der "neuen" V14 mit OScam

Neuer Thread:

Du musst angemeldet sein, um Bilder zu sehen.

Und mache erstmal die Änderungen, die ich Dir gepostet habe, starte Oscam neu, und dann sehen wir weiter.....wenn es dann nicht geht, mache den eigenen Thread auf, da erkläre ich Dir dann, wie Du einen Startlog bekommst.

sekiz · 25. Mai 2014

Änderung hatte ich schon gemacht. Und in meinem letzten Post einen ausschnitt aus dem Livelog reinkopiert.

Mit dem Thread meinte ich ich welchen Bereich ich ihn öffnen sollte

Bekomme die V14 nicht zum laufen. Die HD01 rennt

Aktuell sehen die OScam Config so aus:

oscam.conf

[global]logfile = /var/cache/oscam.log
disableuserfile = 0
#clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1
waitforcards = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
decodeforever = 1

[webif]
httpport = 17001
httpuser = userosif
httppwd = passosif
httprefresh = 10
httpallowed = 127.0.0.1,190.168.0.0-190.168.255.255

[cache]
delay = 120

oscam.dvbapi

P:098C
P:1830

oscam.server

[reader]label = skyV14
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
cardmhz = 2700
group = 1
ecmwhitelist = 098C:98,9B,97,57,91
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
saveemm-u = 1
ndsversion = 2

[reader]
label = hd01
protocol = internal
device = /dev/sci1
caid = 1830
rsakey = B.....5
boxkey = A....C
detect = cd
ecmwhitelist = 1830:92
autospeed = 1
cardmhz = 2700
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,3,2
auprovid = 003411

oscam.user

[account]user = local
au = 1
pwd = 12121212
caid = 1830
group = 2

[account]
user = lokal
au = V14
group = 1

Der LiveLog aus dem OScam meldet dieses:

2014/05/25 11:30:48 56C8C8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/05/25 11:30:48 56C8C8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/05/25 11:30:49 56C8C8 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (1 ms) (invalid caid 0x1833)
2014/05/25 11:30:49 0 --- Skipped 1 duplicated log lines ---
2014/05/25 11:30:49 56C8C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 11:30:49 56C8C8 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0F PMTPID 0063 (NO MATCHING READER)

waves · 25. Mai 2014

AW: V14 und HD01

Du hast ja doch nicht alle Änderungen gemacht....^^

Dem User mußt Du 098C auch erlauben.....

Code:

[account]
user                          = local
au                            = 1
pwd                           = 12121212
caid                          = [COLOR=#ff0000]098C,[/COLOR]1830
group                         = 1,2

Startlog:

Oscam neu starten, dann via Filezilla oder ähnlichem auf die Box verbinden. Du hast

Code:

logfile                       = /var/cache/oscam.log

angegeben, um das logfile zu speichern. Also gehst Du dahin, öffnest die Logdatei, scrollst weit runter, und kopierst alles ab dem Moment wo Du neu gestartet hast hier in einen Spoiler.

metaisopan · 25. Mai 2014

AW: V14 und HD01

Code:

[account]
user                          = local
au                            = 1
group                         = 1,2

sekiz · 25. Mai 2014

AW: V14 und HD01

kurz noch eine frage bevor ich es poste. ist im oscam.log eine serial der karte mit angegeben. oder kann ich alles so posten...

waves · 25. Mai 2014

AW: V14 und HD01

Die Serial wegmachen....falls vorhanden

MOSCH69 · 25. Mai 2014

AW: Freischaltung der "neuen" V14 mit OScam

Autospeed sollte wohl = 1 gesetzt werden in oscamserver.

Gesendet von meinem HTC One max mit Tapatalk

sekiz · 25. Mai 2014

AW: V14 und HD01

oscam.log

2014/05/25 11:55:15 0 --- Skipped 1 duplicated log lines ---2014/05/25 11:55:15 56B708 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 11:55:15 56B708 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 11:55:16 56B708 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/05/25 11:55:16 56B708 c local (098C&000000/0C20/006C/98:6XXXXXXXXXXXXXXXXXX3): not found (1 ms) by skyV14
2014/05/25 11:55:17 56B708 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (1 ms) (invalid caid 0x1833)
2014/05/25 11:55:17 56B708 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (0 ms) (invalid caid 0x1833)
2014/05/25 11:55:17 56B708 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 11:55:17 56B708 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 11:55:17 56B708 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!
2014/05/25 11:55:18 56B708 c local (098C&000000/0C20/006C/98:61XXXXXXXXXXXXXXXXX03): not found (1 ms) by skyV14
2014/05/25 11:55:19 56B708 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (1 ms) (invalid caid 0x1833)

habe zwar was weg gemacht. weiss aber nicht ob es die serial war

waves · 25. Mai 2014

AW: V14 und HD01

Das ist kein Startlog, hier sieht man nicht, ob die Karte überhaupt erkannt wird....das ist der Sinn eines Startlogs.....das ist was von mittendrin.

mach mal die maxlogsize größer.......setz mal auf 1024, in der oscam.conf

sekiz · 25. Mai 2014

AW: V14 und HD01

So ich habe es jetzt. Ist ATR Bereich die Serial der Karte? Oder wo finde ich diese?

waves · 25. Mai 2014

AW: V14 und HD01

Vom ATR lass die ersten 6 Stellen stehen. Die Stellen 5 & 6 zeigen, ob die Karte im Fastmode läuft. Sonst steht da noch irgendwo "Serial", aber das sollte eigentlich schon durch "#####" ersetzt sein.

sekiz · 25. Mai 2014

AW: V14 und HD01

start.log

------------------------------------------------------------------------------->> OSCam << cardserver started at Sun May 25 12:04:03 2014
-------------------------------------------------------------------------------
2014/05/25 12:04:03 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9741 (mipsel-unknown-linux-gnu-libusb)
2014/05/25 12:04:03 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1226
2014/05/25 12:04:03 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/05/25 12:04:03 0 s signal handling initialized
2014/05/25 12:04:03 0 s skyV14 [internal] creating thread for device /dev/sci0
2014/05/25 12:04:03 0 s hd01 [internal] creating thread for device /dev/sci1
2014/05/25 12:04:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/05/25 12:04:03 0 s waiting for local card init
2014/05/25 12:04:03 55CDA8 r skyV14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/05/25 12:04:03 55EBD8 r hd01 [internal] Reader initialized (device=/dev/sci1, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/05/25 12:04:03 55EBD8 r hd01 [internal] card detected
2014/05/25 12:04:03 55CDA8 r skyV14 [internal] card detected
2014/05/25 12:04:03 565BB8 h webif: decompressed 153168 bytes back into 367920 bytes
2014/05/25 12:04:03 565BB8 h HTTP Server running. ip=0.0.0.0 port=17001
2014/05/25 12:04:04 55CDA8 r skyV14 [internal] ATR: 3F FD 15
2014/05/25 12:04:04 55CDA8 r skyV14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
2014/05/25 12:04:04 55CDA8 r skyV14 [internal] TEST tempo mhz check = 500 mhz
2014/05/25 12:04:04 55CDA8 r skyV14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
2014/05/25 12:04:05 55EBD8 r hd01 [internal] ATR: 3F FF 95
2014/05/25 12:04:05 55EBD8 r hd01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/05/25 12:04:05 55EBD8 r hd01 [internal] TEST tempo mhz check = 500 mhz
2014/05/25 12:04:05 55EBD8 r hd01 [internal] Calculated work ETU is 5.93 us reader mhz = 540
2014/05/25 12:04:09 55CDA8 r skyV14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/05/25 12:04:09 55EBD8 r hd01 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 5.40 Mhz (nearest possible mhz specified reader->cardmhz)
2014/05/25 12:04:09 55EBD8 r hd01 [internal] Card responded ok for ifsd request of 251
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] Card type: P1TV
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] Rom version: 20AA
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] Credit available on card: 0 euro
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] Extended 4C detected
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] Region Code:
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] Pincode read: 9525
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] PCB settings: FF FF FF FF
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] ready for requests
2014/05/25 12:04:10 55CDA8 r skyV14 [internal] found card system videoguard2
2014/05/25 12:04:10 55CDA8 r skyV14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/25 12:04:10 55CDA8 r skyV14 [videoguard2] card detected
2014/05/25 12:04:10 55CDA8 r skyV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/05/25 12:04:10 55EBD8 r hd01 [internal] detect native nagra card
2014/05/25 12:04:11 55EBD8 r hd01 [internal] found card system nagra
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] ROM: D N A S P 1 4 2
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] REV: R e v G C 6
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] SER: ############
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] CAID: 1830
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] Prv.ID: 00 00 00 00
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] IRD ID: ############
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] active to: 2014/07/16 12:59
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] -----------------------------------------
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] |id |tier |valid from |valid to |
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] +----+--------+------------+------------+
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] |8011|0BEA |2011/01/02 |2014/08/05 |
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] |8011|0064 |2010/01/03 |2011/01/04 |
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] -----------------------------------------
2014/05/25 12:04:11 55EBD8 r hd01 [nagra] ready for requests
2014/05/25 12:04:13 0 s init for all local cards done
2014/05/25 12:04:13 0 s anti cascading disabled
2014/05/25 12:04:13 56CA80 c plain dvbapi-client granted (local, au=auto (2 reader))
2014/05/25 12:04:13 56CA80 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/05/25 12:04:13 56CA80 c [ADD PID 0] CAID: 1833 ECM_PID: 180F PROVID: 000000
2014/05/25 12:04:13 56CA80 c [ADD PID 1] CAID: 09C4 ECM_PID: 1B0F PROVID: 000000
2014/05/25 12:04:13 56CA80 c [ADD PID 2] CAID: 09AF ECM_PID: 1F0F PROVID: 000000
2014/05/25 12:04:13 56CA80 c [ADD PID 3] CAID: 098C ECM_PID: 1A0F PROVID: 000000
2014/05/25 12:04:13 56CA80 c Found 4 ECMpids and 3 STREAMpids in PMT
2014/05/25 12:04:13 56CA80 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
2014/05/25 12:04:13 56CA80 c New program number: 006C (1833:006C unknown) [pmt_list_management 3]
2014/05/25 12:04:14 55CDA8 r skyV14 [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
2014/05/25 12:04:14 56CA80 c local (098C&000000/0C20/006C/98:A449D7E26F3C32672FDC48F755AACA5B): not found (61 ms) by skyV14
2014/05/25 12:04:14 56CA80 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (0 ms) (invalid caid 0x1833)
2014/05/25 12:04:14 56CA80 c local (1833&000000/0000/006C/89:00000000000000000000000000000000): rejected caid (1 ms) (invalid caid 0x1833)
2014/05/25 12:04:14 56CA80 c [DVBAPI] Demuxer #0 impossible to descramble PID #1 CAID 09C4 PROVID 000000 ECMPID 1B0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 12:04:14 56CA80 c [DVBAPI] Demuxer #0 impossible to descramble PID #2 CAID 09AF PROVID 000000 ECMPID 1F0F PMTPID 0063 (NO MATCHING READER)
2014/05/25 12:04:14 56CA80 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 4 ecmpids!

Suche

Suche

V14 und HD01

sekiz

Freak

waves

sekiz

Freak

waves

sekiz

Freak

waves

metaisopan

Ist gelegentlich hier

sekiz

Freak

waves

MOSCH69

Elite Lord

sekiz

Freak

waves

sekiz

Freak

waves

sekiz

Freak

Ähnliche Themen

Spenden Unterstützung