V14 - Mit dem Logging angefangen

[Phr0zenPhara0]

Hallo zusammen, erstmal danke an alle die hier soviel schreiben. Hab die letzten 4 Wochen ordentlich mit gelesen.

Nun muss ich selber aktiv werden da meine V14 angekommen ist. Die S02 ist vor unique EMMs geblockt und läuft noch. Für die V14 werden allen EMMS geblockt und gesichert. vdr-sc liefert über newcamd fleißig EMMs an meinen Oscam Server. Also alles wie es sein soll. Sky Krimi läuft im dauerlauf.

Bisher (2h) sind nur global EMM angekommen. Unique hab ich bisher gar keine gesehen. Ich weiß, es soll bis zu 72h dauern ;-)

/var/log# tail -f /var/log/oscam.log | grep -i emm
2015/07/24 09:31:04 xxxxxxxx c (reader) skyv14 [videoguard2] Successfully added EMM to /var/log/skyv14_global_emm.log
2015/07/24 09:31:04 xxxxxxxx c (reader) skyv14 [videoguard2] Successfully added EMM to /var/log/skyv14_global_emm.log

Kann ich irgendwie sichergehen das der oscam + vdr-sc auch auf die richtige Seriennummer für die unique EMMs lauscht? Im Log sehe ich bisher keine SN für meine Smardcard

2015/07/24 08:39:00 xxxxxxxx r (reader) skyv14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/07/24 08:39:00 xxxxxxxx r (reader) skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004


Möchte ungern ins KC gehen nur um zu prüfen ob unique emms ankommen und ob auf die richtigen geloggt wird. Oder ist meine Sorge unbegründet?

 

[JF2707]

AW: V14 - Mit dem Logging angefangen

hier steht alles drin, was zur Ursachenforschung fehlt.

https://www.digital-eliteboard.com/361741-wie-poste-ich-im-oscam-bereich-richtig.html

Gruß

 

[4gx35]

AW: V14 - Mit dem Logging angefangen

eigentlich sollten jetzt auch u-emm da sein,
mal die letzten seiten der anleitung lesen (signatur)
du kannst dir die emm per oscam webif ansehen

 

[Phr0zenPhara0]

AW: V14 - Mit dem Logging angefangen

Lustigerweise hab ich über 916 g-emm, jedoch keine geloggten/geblockten u-emm auf der Karte im Web-IF. Kundencenter ist offline. Doch mal anrufen?

Spoiler

[TABLE="class: readers, width: 1904"]
[TR]
[TH="bgcolor: #CCCCCC, colspan: 3"]ECM[/TH]
[TH="bgcolor: #CCCCCC, colspan: 4"]EMM[/TH]
[TH="bgcolor: #CCCCCC"]LB[/TH]
[TH="bgcolor: #CCCCCC, colspan: 6"][/TH]
[/TR]
[TR]
[TH="bgcolor: #CCCCCC"]On/Off[/TH]
[TH="class: sortable, bgcolor: #CCCCCC"]Reader[/TH]
[TH="class: sortable, bgcolor: #CCCCCC"]Protocol[/TH]
[TH="bgcolor: #CCCCCC"]Groups[/TH]
[TH="class: sortable, bgcolor: #CCCCCC"]OK[/TH]
[TH="class: sortable, bgcolor: #CCCCCC"]NOK[/TH]
[TH="bgcolor: #CCCCCC"]Filtered
Head / Len[/TH]
[TH="bgcolor: #CCCCCC"]error
UK / G / S / UQ[/TH]
[TH="bgcolor: #CCCCCC"]written
UK / G / S / UQ[/TH]
[TH="bgcolor: #CCCCCC"]skipped
UK / G / S / UQ[/TH]
[TH="bgcolor: #CCCCCC"]blocked
UK / G / S / UQ[/TH]
[TH="bgcolor: #CCCCCC"]Weight[/TH]
[TH="bgcolor: #CCCCCC, colspan: 6"]Action[/TH]
[/TR]
[TR="class: enabledreader"]
[TD="class: readercol0, bgcolor: #EEEEEE"][/TD]
[TD="class: readercol1, bgcolor: #EEEEEE"][/TD]
[TD="class: readercol2, bgcolor: #EEEEEE"]mouse[/TD]
[TD="class: readercol3, bgcolor: #EEEEEE"]1[/TD]
[TD="class: readercol4, bgcolor: #EEEEEE"]0 (0.00 %)[/TD]
[TD="class: readercol5, bgcolor: #EEEEEE"]0 (0.00 %)[/TD]
[TD="class: readercol6, bgcolor: #EEEEEE"]0 / 0[/TD]
[TD="class: readercol7, bgcolor: #EEEEEE"]0 / 0 / 0 / 0[/TD]
[TD="class: readercol8, bgcolor: #EEEEEE"]0 / 0 / 0 / 0[/TD]
[TD="class: readercol9, bgcolor: #EEEEEE"]0 / 0 / 0 / 0[/TD]
[TD="class: readercol10, bgcolor: #EEEEEE"]0 / 920 / 0 / 0[/TD]
[TD="class: readercol11, bgcolor: #EEEEEE"]100[/TD]
[TD="class: readercol12, bgcolor: #EEEEEE"][/TD]
[TD="class: readercol13, bgcolor: #EEEEEE"][/TD]
[TD="class: readercol14, bgcolor: #EEEEEE"][/TD]
[TD="class: readercol15, bgcolor: #EEEEEE"][/TD]
[TD="class: readercol16, bgcolor: #EEEEEE"][/TD]
[TD="class: readercol17, bgcolor: #EEEEEE"][/TD]
[/TR]
[/TABLE]

oscam.server

Spoiler

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1
ndsversion = 2

 

[Phr0zenPhara0]

AW: V14 - Mit dem Logging angefangen

[SUP]Vollständiges Log:

[/SUP]

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Fri Jul 24 08:38:56 2015
-------------------------------------------------------------------------------
2015/07/24 08:38:56 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10888 (i686-linux-gnu-libusb)
2015/07/24 08:38:56 00000000 s (main) System name = Linux
2015/07/24 08:38:56 00000000 s (main) Host name = XXXXXXX
2015/07/24 08:38:56 00000000 s (main) Release = 3.2.0-83-generic-pae
2015/07/24 08:38:56 00000000 s (main) Version = #120-Ubuntu SMP Wed Apr 29 15:55:27 UTC 2015
2015/07/24 08:38:56 00000000 s (main) Machine = i686
2015/07/24 08:38:56 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 2699
2015/07/24 08:38:56 00000000 s (config) services reloaded: 0 services freed, 8 services loaded, rejected 0
2015/07/24 08:38:56 00000000 s (config) userdb reloaded: 3 accounts loaded, 0 expired, 1 disabled
2015/07/24 08:38:56 00000000 s (main) signal handling initialized
2015/07/24 08:38:56 00000000 s (config) 200 service-id's loaded in 0 ms
2015/07/24 08:38:56 00000000 s (net) monitor: initialized (fd=6, port=17501)
2015/07/24 08:38:56 00000000 s (net) newcamd: initialized (fd=7, port=15051)
2015/07/24 08:38:56 00000000 s (net) -> CAID: 1702 PROVID: 000000
2015/07/24 08:38:56 00000000 s (net) newcamd: initialized (fd=8, port=17001)
2015/07/24 08:38:56 00000000 s (net) -> CAID: 1702 PROVID: 000000
2015/07/24 08:38:56 00000000 s (net) newcamd: initialized (fd=9, port=17002)
2015/07/24 08:38:56 00000000 s (net) -> CAID: 1833 PROVID: 000000
2015/07/24 08:38:56 00000000 s (net) newcamd: initialized (fd=10, port=17005)
2015/07/24 08:38:56 00000000 s (net) -> CAID: 1830 PROVID: 003411
2015/07/24 08:38:56 00000000 s (net) newcamd: initialized (fd=11, port=17010)
2015/07/24 08:38:56 00000000 s (net) -> CAID: 1830 PROVID: 000000
2015/07/24 08:38:56 00000000 s (net) newcamd: initialized (fd=12, port=17015)
2015/07/24 08:38:56 00000000 s (net) -> CAID: 098C PROVID: 000000
2015/07/24 08:38:56 00000000 s (reader) skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/07/24 08:38:56 00000000 s (reader) sky [smartreader] creating thread for device 001:004
2015/07/24 08:38:56 00000000 s (reader) hdplus [smartreader] creating thread for device 001:003
2015/07/24 08:38:56 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/07/24 08:38:56 00000000 s (main) waiting for local card init
2015/07/24 08:38:56 43DD1AB7 h (webif) webif: decompressed 163349 bytes back into 388764 bytes
2015/07/24 08:38:56 43DD1AB7 h (webif) HTTP Server running. ip=0.0.0.0 port=17500
2015/07/24 08:38:56 7BD92751 r (reader) hdplus [smartreader] Reader initialized (device=001:003, detect=cd, mhz= AUTO, cardmhz=369)
2015/07/24 08:38:56 551DBC74 r (reader) sky [smartreader] Reader initialized (device=001:004, detect=cd, mhz= AUTO, cardmhz=600)
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Buffers readed 0 bytes total time_us 75142
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 1 value 03 time_us 7013
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 2 value 40 time_us 964
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 3 value 57 time_us 32907
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 4 value 5b time_us 1939
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 5 value bf time_us 1944
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 6 value f5 time_us 958
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 7 value fe time_us 1920
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 8 value 0f time_us 1950
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 9 value 7d time_us 951
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 10 value f2 time_us 1929
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 11 value af time_us 1930
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 12 value 69 time_us 964
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 13 value 00 time_us 1918
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 14 value ad time_us 1954
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 15 value f5 time_us 948
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 16 value f0 time_us 1918
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 17 value ff time_us 1946
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 18 value ff time_us 958
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 19 value f5 time_us 1926
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 20 value 73 time_us 1938
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Flush readed byte Nr 21 value 3f time_us 957
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Buffers readed 21 bytes total time_us 146216
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/07/24 08:38:57 7BD92751 r (reader) hdplus [smartreader] card detected
2015/07/24 08:38:57 551DBC74 r (reader) sky [smartreader] card detected
2015/07/24 08:38:57 4D690C48 r (reader) skyv14 [mouse] card detected
2015/07/24 08:38:58 4D690C48 r (reader) skyv14 [mouse] Buffers readed 0 bytes total time_us 75138
2015/07/24 08:38:59 4D690C48 r (reader) skyv14 [mouse] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/07/24 08:38:59 4D690C48 r (reader) skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=16, N=2
2015/07/24 08:38:59 4D690C48 r (reader) skyv14 [mouse] Setting baudrate to 153600 bps
2015/07/24 08:38:59 4D690C48 r (reader) skyv14 [mouse] Calculated work ETU is 6.51 us reader mhz = 357
2015/07/24 08:38:59 4D690C48 r (reader) skyv14 [mouse] Buffers readed 0 bytes total time_us 75139
2015/07/24 08:38:59 4D690C48 r (reader) skyv14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] Card type: P1TV
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] Rom version: 20AA
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] Credit available on card: 0 euro
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] Extended 4C detected
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] FuseByte: 00
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] Region Code:
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] Country Code: DEU
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] Pincode read: XXXX
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] PCB settings: FF FF FF FF
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] ready for requests
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [mouse] found card system videoguard2
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] card detected
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] ------------------------------------------------------------------
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] |------- This card is not active, so no package available! ------|
2015/07/24 08:39:00 4D690C48 r (reader) skyv14 [videoguard2] ------------------------------------------------------from-ins70--

oscam.user

Spoiler

[account]
user = vdrsky3
pwd = XXXXXXxxXXXxxXXX
au = 1
group = 1
caid = 098C

 

[Rohrby]

AW: V14 - Mit dem Logging angefangen

Mach doch mal saveemm-g aus! Das macht so viel Traffic das die unique auf der Strecke bleiben
Log sieht gut aus!

 

[4gx35]

AW: V14 - Mit dem Logging angefangen

und warum gibt es da noch 2 smartreader ???

 

[Phr0zenPhara0]

AW: V14 - Mit dem Logging angefangen

Für die S02 und eine HD01. Die Funktionieren schon seit Jahren ohne Probleme und auch weiterhin.. Okay, ich mache saveemm-g aus. Dachte das könnte nicht schaden da die eh in eine gesonderte Datei geschrieben werden.

 

[Phr0zenPhara0]

AW: V14 - Mit dem Logging angefangen

Hm, scheint am vdr-sc zu liegen. Hatte schonmal jemand: https://www.digital-eliteboard.com/373231-oscam-neue-v14-mit-vdr-und-sc-plugin-nur-globale-emm.html

 

[4gx35]

AW: V14 - Mit dem Logging angefangen

vielleicht kannst du einen freund finden, der au für dich macht