Quantcast
Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Unibox DTS fähig?

AW: Unibox DTS fähig?

Hab nen Verstärker mit HDMI ein-ausgang

Also sollte es gehen oder
 
AW: Unibox DTS fähig?

mkv-Formate mit DTS-Tonspur werden von der Unibox abgespielt! Grade nochmal gestestet mit einem Film im mkv-Format der DTS-Tonspuren hat! Die Unibox ist bei mir per optischen Kabel an einen DTS fähigen AV-Receiver angeschlossen! Die DTS-Tonspur wird dabei korrekt von der Unibox an den AV-Receiver weitergegeben!

Aktuell werden von den 8 mkv-Formaten 4 von der Unibox gelesen.

Wer das selber ausprobieren möchte, der kann das testen! Hab dazu folgenden Thread vorbereitet: https://www.digital-eliteboard.com/showthread.php?262873-mkv-Testfiles&p=1853642#post1853642
 
AW: Unibox DTS fähig?

Danke.

Was gibt es denn für 8 verschiedene mkv Files?
 
AW: Unibox DTS fähig?

MatroskaTest Files - Wave 1

This suiteof files was created to validate the various Matroska players,
parsers tomake sure users get a consistent experience when moving
their fileson various programs/hardware. Since Matroska has a lot of
features, itis hard to tell which are essential, which are encouraged and
which aredeprecated. The files presented here represent the minimum
support aplayer should have to fully qualify as a Matroska player.

Codecs

Matroska cansupport any codec that is around. That doesn't mean
softwaresshould support all of them. For various reasons softwares and
hardwarescan't always be upgraded to support all codecs around. But in
the otherhand there are a few safe codecs that are often found in
Matroska andWebM that should be supported. These codec can be found
in variousresolutions and features so even with the right codec support,
it is notguaranteed that an implementation may support all the possibilities
of a codec(it is hardly ever the case). This document will not cover codec
details. Buthere is a list of codecs that are commonly found in Matroska:

Video codecs
-H264/AVC/MPEG4 Part 10, usually up to 1080p
- MPEG4 Part2, usually up to 720p
- VP8,usually up to 720p
- Theora,usually up to 720p

Audio codecs
- MPEG AudioLayer 3 (MP3)
- Vorbis
- AAC, AAC+,eACC+
- AC-3
- DTS
- FLAC

Subtitlescodecs
- plainUTF-8 text
- ASS/SSAtext
- VOBSUB(bitmaps from DVDs)
- Audio onlyfiles

It isimportant to note that audio can also be used in audio only files,
usually withthe .mka extension. Those files should be handled as well, as
long as thecodec is supported.

Extrafeatures

There are anumber of features that are not essential to the playback
experiencebut could really improve it, like support for tags, cover art,
embeddedfonts, segment linking. We won't blame you if you don't support
these, butyour users/customers will probably ask for it at some point.
There isalso 3D support that is meant to grow in the coming years.
Matroskashould be able to support all the formats, but given the subject
is reallynew, it's not covered by this suite of files.

** Test Files **

1. Basicfile

This file isthe absolute minimum a compliant player should be able to
handle.

The samplecomes from the Big Buck Bunny open project. It contains MPEG4.2
(DivX)video, (854x480) MP3 audio, uses only SimpleBlock (matroska DocType v2)

2. Non default timecodescale & aspect ratio

This filehas different features that need to be looked at carefully. The
main one isthe global TimecodeScale in the SegmentInfo is set to 100,000
rather thanthe default 1,000,000. That value affects the values of the file
Duration inthe Segment and the Clusters Timecode. The aspect ratio has
also beenstretched artificially to represent a 2.35 movie (from the original
16:9 aspectratio). This file also contains CRC-32 values in the EBML
header, theMetaSeek, the Segment Info, the Tracks and the Tags and
PrevSize/Positionin the Clusters for better error recovery.

It containsH264 (1024x576 pixels), and stereo AAC. The source material is
taken fromthe Elephant Dreams video project

3. Header stripping & standard block

This file isusing BlockGroup+Block only for audio and video frames. It also
removes 2bytes off each video and audio frame since they are all equal.
These 2bytes have to be put back in the frame before decoding. his file
alsocontains CRC-32 values in the EBML header, the MetaSeek, the
SegmentInfo, the Tracks and the Tags and PrevSize/Position in the
Clusters forbetter error recovery.

It containsH264 (1024x576 pixels), and stereo MP3. The source material
is takenfrom the Elephant Dreams video project

4. Live stream recording

This file isusing the EBML feature that allows Master elements to have no
known size.It is used for live streams because they don't know ahead of
time thesize of the Segment (virtually infinite) and even sometimes the
size of theClusters (no caching on the server side). The first timecode of
the filealso doesn't start at 0 since it's supposed to be a capture from
somethingcontinuous. The SegmentInfo also doesn't contain any Duration
as it is notknow.

The samplecomes from the Big Buck Bunny open project. It contains Theora
video(1280x720), Vorbis audio, uses only SimpleBlock (matroska DocType v2)

A similarfile can be created with mkclean using the "--live" option

5. Multipleaudio/subtitles

This has amain audio track in english and a secondary audio track in
english. Italso has subtitles in English, French, German, Hungarian,
Spanish,Italian and Japanese. The player should provide the possibility to
switchbetween these streams.

The samplecontains H264 (1024x576 pixels), and stereo AAC and
commentaryin AAC+ (using SBR). The source material is taken from the
ElephantDreams video project

6. DifferentEBML head sizes & cue-less seeking

This file isa test of the EBML parser of the player. The size of the
Segment andBlock/SimpleBlock is coded using 1 (or the minimum possible
the size)and 8 bytes randomly. The file also have no Cues entry. So
seekingshould be disabled or look for Cluster boundaries in the stream
(much slowerthan using Cues).

The samplecomes from the Big Buck Bunny open project. It contains
MPEG4.2(DivX) video, (854x480) MP3 audio, uses only SimpleBlock
(matroskaDocType v2)

7. Extraunknown/junk elements & damaged

This filecontains junk elements (elements not defined in the specs) either
at thebeggining or the end of Clusters. These elements should be skipped.
There isalso an invalid element at 451417 that should be skipped until the
next validCluster is found.

The samplecontains H264 (1024x576 pixels), and stereo AAC. The source
material istaken from the Elephant Dreams video project

8. Audio gap

This filehas a few audio frames missing between timecodes 6.019s and
6.360s. Theplayback should not stop, and if possible the video should not
be skippedwhere the audio is missing

The samplecontains H264 (1024x576 pixels), and stereo AAC. The source
material istaken from the Elephant Dreams video project

Tools

All thesefiles were created with mkvmerge and mkclean. They also pass
themkvalidator test tool (the test file 4 needs the --live option to
correctlyvaldiate the file), except for the damaged file, as it is damaged.

Contact

If you haveany question about these files please contact us at contact@matroska.org

Changelog

2011-06-02 -w1_1: fix test2.mkv with had a duration not based on TimecodeScale
2010-08-21 - w1: initial version
 
Zuletzt bearbeitet von einem Moderator:
AW: Unibox DTS fähig?

Hey,

Hab die unibox jetzt. Über HDMI durchgeschliffen am Verstärker zum Reciever..

Testfilm 300 mit DTS Ton.

Media pc abspielen - Verstärker zeigt das ein DTS Format ankommt
Unibox - Verstärker zeigt nur ein "d" (Dolby) wenn downmix = aus
 
Zuletzt bearbeitet:
AW: Unibox DTS fähig?

Ist es besser direkt ein Toslink an den AVR und HDMI an TV, oder nur HDMI durchschleifen?
 
AW: Unibox DTS fähig?

HDMI durchschleifen ist die bessere Variante. Mehr Tonformate möglich (HD) und ein Kabel, respektive eine Fehlerquelle, weniger...


Sent from my iPhone using Tapatalk
 
Zurück
Oben