Umstellung auf Oscam only klappt nicht

[juvitho]

Ich habe einen Raspberry mit Oscam laufen. Auf meiner VU-Box habe ich als Cam MG-Camd laufen, was einwandfrei funktioniert. Leider werden seit jeher keine Emms gespeichert. Habe diese bisher immer von jemanden aus dem Board erhalten. Jetzt leider nicht mehr. Daher wollte ich auf Oscam only umstellen, bekomme es aber nicht hell. Meine Configs vom Server stehen unten (mit MGamd ist es wie gesagt hell damit). Bräuchte dazu die passenden Einstellungen für die Oscam Configs des Recivers und geänderte Einstellungen für den reinen Oscam Betreib . Danke schon mal für eure Hilfe.

Global

Spoiler

Serverip:[TABLE="class: config"]
[TR]
[TD][/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Nice:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Net prio:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Bind wait:[/TD]
[TD] s[/TD]
[/TR]
[TR]
[TD]Resolver:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Wait for cards:[/TD]
[TD] disable client logins while card-init [/TD]
[/TR]
[TR]
[TD]Wait for cards delay:[/TD]
[TD] ms[/TD]
[/TR]
[TR]
[TD]Prefer local cards:[/TD]
[TD][/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Unlock parental:[/TD]
[TD]Only for Seca and Viaccess[/TD]
[/TR]
[TR]
[TD]Simple block:[/TD]
[TD] same IP same Name [/TD]
[/TR]
[TR]
[TD]Drop duplicate users:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TH="colspan: 2"]Logging[/TH]
[/TR]
[TR]
[TD]Usr file:[/TD]
[TD] enabled [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Mail file:[/TD]
[TD] enabled [/TD]
[/TR]
[TR]
[TD]Log file / max size:[/TD]
[TD] enabled kB [/TD]
[/TR]
[TR]
[TD]Log duplicated lines:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Initial debug level:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Pid file:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]CW log dir:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]EMM log dir:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]ECM log format:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Loghistory Lines:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Syslog server:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Syslog port:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Failban[/TH]
[/TR]
[TR]
[TD]Failban time:[/TD]
[TD] min blocking IP based[/TD]
[/TR]
[TR]
[TD]Failban count:[/TD]
[TD] chances with wrong credentials[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Timeouts / Times[/TH]
[/TR]
[TR]
[TD]Client timeout:[/TD]
[TD] ms to give up and return timeout[/TD]
[/TR]
[TR]
[TD]Fallback timeout:[/TD]
[TD] ms to switch to fallback reader[/TD]
[/TR]
[TR]
[TD]Fallback timeout per caid:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Client max idle:[/TD]
[TD] s to disconnect idle clients[/TD]
[/TR]
[TR]
[TD]Global sleep:[/TD]
[TD] min to switch a client in sleepmode[/TD]
[/TR]
[TR]
[TD]Reader restart seconds:[/TD]
[TD] s waittime to restart a reader[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Doublecheck[/TH]
[/TR]
[TR]
[TD]ECM Doublecheck:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Doublecheck caids:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Cs357x/Cs378x[/TH]
[/TR]
[TR]
[TD]Suppress cmd08:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Get BlockEmm & AU Provid Settings from Server:[/TD]
[TD]temporary (only for Clients)[/TD]
[/TR]
[TR]
[TD="class: configcolsave, colspan: 2"][/TD]
[/TR]
[TR="class: configfirstrow"]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]

Readerconfig

Spoiler

[TABLE="class: configreader"]
[TR]
[TH="colspan: 2"]Reader general settings[/TH]
[/TR]
[TR]
[TD]Description:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Enable:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Device:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Group:[/TD]
[TD] Valid values 1-64[/TD]
[/TR]
[TR]
[TD]Fallback:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Fallback per caid:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Loadbalance weight:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Caid:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Ident:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]CHID:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Local cards:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]AU disabled:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]AU Provid:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Ratelimit ECM:[/TD]
[TD="class: invisible"]

ECM Unique:

[/TD]
[/TR]
[TR]
[TD]Ratelimittime:[/TD]
[TD] ms[/TD]
[/TR]
[TR]
[TD]Additional ms to hold SRVID in slot:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Cooldown Delay:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Cooldown Time:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]ECM not found limit:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]ECM whitelist:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]ECM HeaderWhitelist:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Drop CWs with wrong checksum:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Skip CWs checksum test:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Emmcache:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Saveemm:[/TD]
[TD="class: invisible"]

unknown

unique

shared

global

[/TD]
[/TR]
[TR]
[TD]Blockemm:[/TD]
[TD="class: invisible"]

unknown

unique

shared

global

[/TD]
[/TR]
[TR]
[TD]Block EMM by Len:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for protocol mouse[/TH]
[/TR]
[TR]
[TD]Detect:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]MHz:[/TD]
[TD] desired clockspeed or auto if autospeedbox is checked(auto only applies to smargo or dreambox yet)[/TD]
[/TR]
[TR]
[TD]Autospeed:[/TD]
[TD]Sets mhz according to atr for smargo readers and dreambox internal readers. Default is checked[/TD]
[/TR]
[TR]
[TD]Card MHz:[/TD]
[TD] Dreambox Mipsel: 2700, PPC: 3150, DM7025: 8300 ELSE set wanted cardinit speed. Default 357[/TD]
[/TR]
[TR]
[TD]RSA Key:[/TD]
[TD]Only for Nagra, Tiger, Irdeto and Conax[/TD]
[/TR]
[TR]
[TD]3DES Key:[/TD]
[TD]Only for Viaccess[/TD]
[/TR]
[TR]
[TD]Boxkey:[/TD]
[TD] Only for Nagra, Irdeto, Seca and Viaccess[/TD]
[/TR]
[TR]
[TD]Pincode:[/TD]
[TD] Only for Conax, Cryptoworks, Seca and Viaccess SCs[/TD]
[/TR]
[TR]
[TD]Readnano:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Blocknano:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Reset after No. ECM:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Deprecated:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for Nagra[/TH]
[/TR]
[TR]
[TD]Read Nagra Records:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for Irdeto[/TH]
[/TR]
[TR]
[TD]Force Irdeto:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Needs EMM before descramble:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for Viaccess[/TH]
[/TR]
[TR]
[TD]AES Keys:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Class:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Read old classes:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for Videoguard[/TH]
[/TR]
[TR]
[TD]Boxid:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Fix 9993 for CAID 0919:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Filter 0x07 for CAID 09C4, 098C:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Force NDS Version:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD]NDS read tiers:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]ins7E11 TA1 Byte (1 byte):[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]ins2E06 payload (4 bytes):[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]ins7E payload (26 bytes):[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for SC8in1[/TH]
[/TR]
[TR]
[TD]SC8in1 DTR/RTS Patch:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for Smargo and Smartreader[/TH]
[/TR]
[TR]
[TD]Use GPIO:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Smargopatch:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Reader specific settings for Cccam[/TH]
[/TR]
[TR]
[TD]CCC Hop:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Reshare:[/TD]
[TD] If this parameter = -1 The value off Global CCCam Reshare

Sie müssen registriert sein, um Links zu sehen.

is used.[/TD]
[/TR]
[TR]
[TH="colspan: 2"]CacheEX[/TH]
[/TR]
[TR]
[TD]Cache-EX-Mode:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Cache-EX Maxhop:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Cache-EX 2 ECM filter:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Cache-EX 2 filter adv.:[/TD]
[TD="class: invisible"]

drop csp cache

allow request

allow filter

[/TD]
[/TR]
[TR]
[TD]Block fake cws:[/TD]
[TD="class: invisible"]

block fake cws

[/TD]
[/TR]
[TR]
[TD="class: configcolsave, colspan: 2"][/TD]
[/TR]
[TR="class: configfirstrow"]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]

User

Spoiler

User general settings [TABLE="class: configuser"]
[TR]
[TH="colspan: 2"][/TH]
[/TR]
[TR]
[TD]Password:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Description:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Disabled:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Exp. Date:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Failban:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Allowed Timeframe:[/TD]
[TD] (hh:mm-hh:mm)[/TD]
[/TR]
[TR]
[TD]Allowed Protocols:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Group:[/TD]
[TD] Valid values 1-64[/TD]
[/TR]
[TR]
[TD]Hostname:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Uniq:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Max. Connections:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Sleep:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Monlevel:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]AU:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]CAID:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Ident:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]CHID:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Class:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Betatunnel:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Suppresscmd08:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Sleepsend:[/TD]
[TD][/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]User Max Idle:[/TD]
[TD] s to disconnect idle users[/TD]
[/TR]
[TR]
[TD]EMM Reassembly:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD]Prefer local cards:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD] Global Prefer local cards value:

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TH="colspan: 2"]User specific settings for Anticascading[/TH]
[/TR]
[TR]
[TD]Anticascading numusers:[/TD]
[TD] Global Numuser value:[/TD]
[/TR]
[TR]
[TD]Anticascading penalty:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD] Global Penalty level:

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TH="colspan: 2"]User specific settings for AntiCascading over Sid Count (ACoSC)[/TH]
[/TR]
[TR]
[TD]ACoSC max_active_sids:[/TD]
[TD] Global ACoSC_max_active_sids value:[/TD]
[/TR]
[TR]
[TD]ACoSC zap_limit:[/TD]
[TD] Global ACoSC_zap_limit:[/TD]
[/TR]
[TR]
[TD]ACoSC penalty:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD] Global ACoSC-Penalty level:

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD]ACoSC penalty_duration:[/TD]
[TD] sec Global ACoSC_penalty_duration value:[/TD]
[/TR]
[TR]
[TD]ACoSC delay:[/TD]
[TD] msec Global ACoSC_delay value:[/TD]
[/TR]
[TR]
[TH="colspan: 2"]User specific settings for CCcam[/TH]
[/TR]
[TR]
[TD]CCC Maxhops:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]CCC Reshare:[/TD]
[TD] Global CCCam Reshare:

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD]CCC Ignore reshare:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD] Global Ignore Reshare value:

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD]CCC stealth:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD] Global CCcam Stealth value:

Sie müssen registriert sein, um Links zu sehen.

[/TD]
[/TR]
[TR]
[TD]Keepalive:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]CacheEX[/TH]
[/TR]
[TR]
[TD]Cache-EX-Mode:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Cache-EX Maxhop:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]No Wait Time:[/TD]
[TD]no wait time[/TD]
[/TR]
[TR]
[TD]Cache-EX 3 ECM filter:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Cache-EX 3 filter adv.:[/TD]
[TD="class: invisible"]

drop csp cache

allow request

allow filter

[/TD]
[/TR]
[TR]
[TD]Block fake cws:[/TD]
[TD="class: invisible"]

block fake cws

[/TD]
[/TR]
[TR]
[TH="colspan: 2"]CW Cycle Check[/TH]
[/TR]
[TR]
[TD]Disable Cycle Check:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD="class: centered"][/TD]
[/TR]
[TR="class: configfirstrow"]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]

DVB-Api

Spoiler

Edit DVB Api Config [TABLE="class: config"]
[TR]
[TH="colspan: 2"][/TH]
[/TR]
[TR]
[TD]Enabled:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD]AU:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD]Boxtype:[/TD]
[TD][/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]User:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]PMT Mode:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD]Request Mode:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Listen port:[/TD]
[TD] TCP port to listen instead of camd.socket[/TD]
[/TR]
[TR]
[TD]Delayer:[/TD]
[TD] ms[/TD]
[/TR]
[TR]
[TD]ecm.info type:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD]Detect channel name:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TD]Write detected prov name to srvid:[/TD]
[TD] [/TD]
[/TR]
[TR]
[TD="class: configcolsave, colspan: 2"][/TD]
[/TR]
[/TABLE]

Web-If

Spoiler

Edit WebIf Config [TABLE="class: config"]
[TR]
[TH="colspan: 2"][/TH]
[/TR]
[TR]
[TD]Http port:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Serverip:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Http user:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Http pwd:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]OSCam Label:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Refresh:[/TD]
[TD="class: invisible"]

Http: s

Poll (initial refresh): s

[/TD]
[/TR]
[TR]
[TD]Http allowed:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Http Help Language:[/TD]
[TD] (en|de|fr|it)[/TD]
[/TR]
[TR]
[TD]Http Locale:[/TD]
[TD] e.g. en_US, de_DE.utf8 (if available and works on the server)[/TD]
[/TR]
[TR]
[TD]Http dyndns:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Au low:[/TD]
[TD] min[/TD]
[/TR]
[TR]
[TD]Http save full config:[/TD]
[TD="class: invisible"]

Http overwrite bak file:

[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Emm settings[/TH]
[/TR]
[TR]
[TD]Http emmlog cleanup size:[/TD]
[TD="class: invisible"]

Unique: kB

Shared: kB

Global: kB (0 = no clean, -1 = not show log)

[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Css style settings[/TH]
[/TR]
[TR]
[TD]Http prepend embedded css:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Http css:[/TD]
[TD] [/TD]
[/TR]
[TR]
[/TR]
[TR]
[TH="colspan: 2"]Script settings[/TH]
[/TR]
[TR]
[TD]Http javascript:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Http script:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Picons settings[/TH]
[/TR]
[TR]
[TD]Http Show Picons:[/TD]
[TD="class: invisible"]

Height: px

[/TD]
[/TR]
[TR]
[TD]Path for picons:[/TD]
[TD][/TD]
[/TR]
[TR]
[TH="colspan: 2"]Show/Hide in Status[/TH]
[/TR]
[TR]
[TD]Http Hide Type:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD]Http Hide Idle Clients:[/TD]
[TD="class: invisible"]

Hide client to: s

[/TD]
[/TR]
[TR]
[TD]Show in STATUS:[/TD]
[TD="class: invisible"]

Log

Users info

ECM info

CACHEEX info

Memory info

Load info

[/TD]
[/TR]
[TR]
[TH="colspan: 2"]Template settings[/TH]
[/TR]
[TR]
[TD]Http tpl:[/TD]
[TD][/TD]
[/TR]
[TR]
[TD="class: configcolsave, colspan: 2"][/TD]
[/TR]
[TR="class: configfirstrow"]
[TD][/TD]
[TD][/TD]
[/TR]
[/TABLE]

Ich seh gerade das die eingetragenden Werte nicht mit kopiert werden. Gibts da nen Trick?

- - - - - - - - - -

Ich seh gerade das die eingetragenden Werte nicht mit kopiert werden. Gibts da nen Trick?

 

[salidos]

AW: Umstellung auf Oscam only klappt nicht

Poste mal den Inhalt der Files und nicht aus dem webif.

 

[juvitho]

AW: Umstellung auf Oscam only klappt nicht

Hab es jetzt über Filezilla direkt runterkopiert.

Global

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11164
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
serverip = 192.168.178.80
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480

[cache]

[cs378x]
port = 22000
serverip = 192.168.178.80

[newcamd]
port = 22000@1830:003411
serverip = 192.168.178.80
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

[cccam]
port = 22000
serverip = 192.168.178.80
nodeid = BBF1A38610D515EE
version = 2.0.11

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 1
user = local
boxtype = dreambox

[webif]
httpport = 16002
httpuser = xxx
httppwd = xxx
httprefresh = 15
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254
httpdyndns =

Oscam user

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11164
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = cccam
pwd = ccam
hostname = localhost
caid = 1830
uniq = 1
keepalive = 0
au = HD+
group = 1

[account]
user = xxxx
pwd = xxx
caid = 098C
au = 1
group = 1

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11164
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = HD+
enable = 0
protocol = mouse
device = /dev/ttyUSB8
detect = cd
group = 1
emmcache = 1,3,2,0

[reader]
label = camd3emu
enable = 0
protocol = cs357x
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 1

[reader]
label = OSEmu
enable = 0
protocol = cs357x
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 1

[reader]
label = cardreader
enable = 0
protocol = mouse
device =
detect = cd

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

 

[salidos]

AW: Umstellung auf Oscam only klappt nicht

SPOILER noch mal neu.

und das soll vom Client sein?

 

[juvitho]

AW: Umstellung auf Oscam only klappt nicht

Nein, das war jetzt alles vom Raspberry.

VU
oscam config

Spoiler

[global]
disablelog = 1
logfile = /tmp/oscam.log
pidfile = /tmp/oscam.pid
unlockparental = 1
nice = -10
maxlogsize = 100
waitforcards = 0
preferlocalcards = 2
dropdups = 0
usrfile = /tmp/user.log
cwlogdir = /var/log/
emmlogdir = /var/log/
lb_mode = 0

[dvbapi]
enabled = 1
au = 1
user = dvbapi_local
boxtype = dreambox


[webif]
httpport = 83
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255,::1
httposcamlabel = Oscam WebInterface

oscam server

Spoiler

[reader]
label = SKY_DE_V1X
description = V13 or V14 (NDS)
caid = 09C4,098C
boxid = 12345678
detect = cd
emmcache = 1,2,2
ins7e11 = 14
ndsversion = 2
saveemm-u = 1
saveemm-unknown = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
mhz = 534
cardmhz = 357
protocol = internal
device = /dev/sci0
group = 1

[reader]
label = cs378x_remote
protocol = cs378x
device = 192.168.178.80,16002
user = xxx
password = xxx
keepalive = 1
reconnecttimeout = 60
group = 2

oscam user

Spoiler

[account]
user = dvbapi_local
au = 1
group = 1

 

[salidos]

AW: Umstellung auf Oscam only klappt nicht

Der Port beim Reader des Client stimmt schonmal nicht mit dem Port auf dem Server überein.
22000 und 16002

und grundsätzlich würde ich jedem Reader auf dem Server ne eigene Group geben und dann auch alle beim User angeben.

 

[juvitho]

AW: Umstellung auf Oscam only klappt nicht

ok, hab ich geändert

Spoiler

[reader]
label = SKY_DE_V1X
description = V13 or V14 (NDS)
caid = 09C4,098C
boxid = 12345678
detect = cd
emmcache = 1,2,2
ins7e11 = 14
ndsversion = 2
saveemm-u = 1
saveemm-unknown = 1
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
blockemm-u = 1
mhz = 534
cardmhz = 357
protocol = internal
device = /dev/sci0
group = 1

[reader]
label = cs378x_remote
protocol = cs378x
device = 192.168.178.80,22000
user = xxxx
password = xxx
keepalive = 1
reconnecttimeout = 60
group = 2

- - - - - - - - - -

Ist aber weiterhin dunkel über Oscam.

 

[salidos]

AW: Umstellung auf Oscam only klappt nicht

Wenn die Sky Karte im Raspi ist, dann brauchst du keinen Reader davon auf dem Client. Der Proxy Reader reicht. Mal alles neu starten und nachschauen. Auch mal ein Oscam.log Posten.

 

[juvitho]

AW: Umstellung auf Oscam only klappt nicht

Welcher ist der Proxi Reader? Das Log vom Server oder gibt es auf dem Clienten auch irgendwo eins?

 

[salidos]

AW: Umstellung auf Oscam only klappt nicht

Dein cs378x_remote auf dem Client.
Ansonsten kannst du auch einfach cccam auf den Client machen und in die cline

C: 192.168.178.80 22000 xxxx xxx

xxxx halt aus der Oscam.user vom Server.

 

[juvitho]

AW: Umstellung auf Oscam only klappt nicht

Irgendwas ist schief gelaufen. Jetzt geht gar nichts mehr. User sind nur noch Anonymus im Status

 

[salidos]

AW: Umstellung auf Oscam only klappt nicht

Nimm dir mal die entsprechenden Configs von hier:

https://www.digital-eliteboard.com/vbdownloads.php?do=download&downloadid=1758

Bei mir tauchen auch mal ab und zu anonymous auf, ich lösch die und starte neu und alles wieder gut.

Falls le du bei deinen Configs bleiben willst, dann gib cccam und c378x auch mal unterschiedliche Ports. Dann aber auch am Client anpassen.

 

[juvitho]

AW: Umstellung auf Oscam only klappt nicht

Momentan bekomme ich es auch mit MGCam nicht hell. Mein 2. Reciver an dem nichts verändert wurde auch nicht.

 

[salidos]

AW: Umstellung auf Oscam only klappt nicht

Mal alles nochmal Neustarten und dann Poste nochmal alle Configs von Server und Client.

 

[juvitho]

AW: Umstellung auf Oscam only klappt nicht

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11164
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
serverip = 192.168.178.80
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480

[cache]

[cs378x]
port = 22000
serverip = 192.168.178.80

[newcamd]
port = 22000@1830:003411
serverip = 192.168.178.80
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

[cccam]
port = 22000
serverip = 192.168.178.80
nodeid = BBF1A38610D515EE
version = 2.0.11

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
delayer = 1
user = local
boxtype = dreambox

[webif]
httpport = 16002
httpuser = xxx
httppwd = xxx
httprefresh = 15
httpallowed = 127.0.0.1,10.10.10.10-192.168.255.254
httpdyndns =

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11164
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = HD+
enable = 0
protocol = mouse
device = /dev/ttyUSB8
detect = cd
group = 1
emmcache = 1,3,2,0

[reader]
label = camd3emu
enable = 0
protocol = cs357x
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 1

[reader]
label = OSEmu
enable = 0
protocol = cs357x
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 1

[reader]
label = cardreader
enable = 0
protocol = mouse
device =
detect = cd

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-unknown = 1
saveemm-u = 1
saveemm-s = 1
saveemm-g = 1

- - - - - - - - - -

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r11164
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
user = cccam
pwd = ccam
hostname = localhost
caid = 1830
uniq = 1
keepalive = 0
au = HD+
group = 1

[account]
user = xxx
pwd = xxx
caid = 098C
au = 1
group = 1