UM02 rennt nicht

[LIST]
[*]2016/03/17 20:40:00 15BC9012 r   (reader) UM02 [internal] card detected 
[*]2016/03/17 20:40:00 15BC9012 r   (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 32 65 
[*]2016/03/17 20:40:00 15BC9012 r   (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255 
[*]2016/03/17 20:40:00 15BC9012 r   (reader) UM02 [internal] Calculated work ETU is 7.11 us reader mhz = 450 
[*]2016/03/17 20:40:03 15BC9012 r   (reader) UM02 [internal] Buffers readed  0 bytes total time_us 2886561 
[*]2016/03/17 20:40:04 15BC9012 r   (reader) UM02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz) 
[*]2016/03/17 20:40:04 15BC9012 r   (reader) UM02 [internal] Card responded ok for ifsd request of 251 
[*]2016/03/17 20:40:05 15BC9012 r   (reader) UM02 [internal] detect native nagra card 
[*]2016/03/17 20:40:06 15BC9012 r   (reader) UM02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us 
[*]2016/03/17 20:40:07 15BC9012 r   (reader) UM02 [internal] T1 Resync command error, trying to reactivate! 
[*]2016/03/17 20:40:08 15BC9012 r   (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 32 65 
[*]2016/03/17 20:40:08 15BC9012 r   (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255 
[*]2016/03/17 20:40:08 15BC9012 r   (reader) UM02 [internal] Calculated work ETU is 7.11 us reader mhz = 450 
[*]2016/03/17 20:40:11 15BC9012 r   (reader) UM02 [internal] Buffers readed  0 bytes total time_us 2886783 
[*]2016/03/17 20:40:12 15BC9012 r   (reader) UM02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz) 
[*]2016/03/17 20:40:12 15BC9012 r   (reader) UM02 [internal] Card responded ok for ifsd request of 251 
[*]2016/03/17 20:40:12 15BC9012 r   (reader) UM02 [internal] card system not supported 
[*]2016/03/17 20:40:12 15BC9012 r   (reader) UM02 [internal] Normal mode failed, reverting to Deprecated Mode 
[*]2016/03/17 20:40:13 15BC9012 r   (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 32 65 
[*]2016/03/17 20:40:13 15BC9012 r   (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255 
[*]2016/03/17 20:40:13 15BC9012 r   (reader) UM02 [internal] Calculated work ETU is 82.67 us reader mhz = 450 
[*]2016/03/17 20:40:16 15BC9012 r   (reader) UM02 [internal] Buffers readed  0 bytes total time_us 2888153 
[*]2016/03/17 20:40:16 15BC9012 r   (reader) UM02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz) 
[*]2016/03/17 20:40:20 15BC9012 r   (reader) UM02 [internal] Warning: Card returned error on setting ifsd value to 251 
[*]2016/03/17 20:40:21 15BC9012 r   (reader) UM02 [internal] detect native nagra card 
[*]2016/03/17 20:40:21 00000000   >> OSCam <<  cardserver log switched, version 1.20-unstable_svn, build r11201 (mipsel-oe-linux) 
[*]2016/03/17 20:40:24 15BC9012 r   (reader) UM02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us 
[*]2016/03/17 20:40:27 15BC9012 r   (reader) UM02 [internal] T1 Resync command error, trying to reactivate! 
[*]2016/03/17 20:40:28 15BC9012 r   (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 32 65 
[*]2016/03/17 20:40:28 15BC9012 r   (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255 
[*]2016/03/17 20:40:28 15BC9012 r   (reader) UM02 [internal] Calculated work ETU is 7.11 us reader mhz = 450 
[*]2016/03/17 20:40:31 15BC9012 r   (reader) UM02 [internal] Buffers readed  0 bytes total time_us 2886888 
[*]2016/03/17 20:40:31 15BC9012 r   (reader) UM02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz) 
[*]2016/03/17 20:40:31 15BC9012 r   (reader) UM02 [internal] Card responded ok for ifsd request of 251 
[*]2016/03/17 20:40:33 15BC9012 r   (reader) UM02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us 
[*]2016/03/17 20:40:34 15BC9012 r   (reader) UM02 [internal] T1 Resync command error, trying to reactivate! 
[*]2016/03/17 20:40:35 15BC9012 r   (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 32 65 
[*]2016/03/17 20:40:35 15BC9012 r   (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255 
[*]2016/03/17 20:40:35 15BC9012 r   (reader) UM02 [internal] Calculated work ETU is 7.11 us reader mhz = 450 
[*]2016/03/17 20:40:38 15BC9012 r   (reader) UM02 [internal] Buffers readed  0 bytes total time_us 2887952 
[*]2016/03/17 20:40:38 15BC9012 r   (reader) UM02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz) 
[*]2016/03/17 20:40:38 15BC9012 r   (reader) UM02 [internal] Card responded ok for ifsd request of 251 
[*]2016/03/17 20:40:38 15BC9012 r   (reader) UM02 [internal] card system not supported 
[*]2016/03/17 20:40:38 15BC9012 r   (reader) UM02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 
[*]2016/03/17 20:40:38 15BC9012 r   (reader) UM02 [internal] card initializing error 
[/LIST]

[reader]
label = UM02
description = Kabel
protocol = internal
device = /dev/sci0
caid = 1838
rsakey = B****F367FF
boxkey = A****C
detect = cd
mhz = 450
cardmhz = 2700
group = 4
emmcache = 1,3,10