UM02 Oscam Probleme

[ottl05]

RSA passt nicht und im sci0 wird immer noch hd02 erkannt

[LIST]
[*]2018/12/01 17:29:48 1E702C0E r   (reader) sci0 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
[*]2018/12/01 17:29:48 1E702C0E r   (reader) sci0 [internal] card system not supported
[*]2018/12/01 17:29:48 1E702C0E r   (reader) sci0 [internal] Normal mode failed, reverting to Deprecated Mode
[*]2018/12/01 17:29:49 1E702C0E r   (reader) sci0 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
[*]2018/12/01 17:29:49 1E702C0E r   (reader) sci0 [internal] HD-Plus 02 recognized
[/LIST]

und waskann ich da tun?
ist eine weiße um02, steht zumindest drauf

 

[ottl05]

boxid = 00BC614E -->ist für eine G09
Lösche mal den sci1 reader und starte Oscam neu.[/QUOTE]


warum den sc1? der geht ja

 

[ghost0815]

Achso, hast auch noch G09 ...OK
Hab dir den RSA mal per PN geschickt.

 

[ottl05]

Achso, hast auch noch G09 ...OK
Hab dir den RSA mal per PN geschickt.

hab über Putty die Daten reinkopiert, leider noch dasselbe

Spoiler: oscam.server

• 2018/12/01 17:53:08 6D8D0E24 h (webif) Reader UM02 restarted by WebIF from 192.168.2.38
• 2018/12/01 17:53:09 2078E397 r (reader) UM02 [internal] Deactivating card
• 2018/12/01 17:53:10 2078E397 r (reader) UM02 [internal] creating thread for device /dev/sci0
• 2018/12/01 17:53:10 1C2D3B2A r (reader) UM02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
• 2018/12/01 17:53:10 1C2D3B2A r (reader) UM02 [internal] Reader sci internal, detected box type: dm7080
• 2018/12/01 17:53:10 1C2D3B2A r (reader) UM02 [internal] card detected
• 2018/12/01 17:53:12 1C2D3B2A r (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
• 2018/12/01 17:53:12 1C2D3B2A r (reader) UM02 [internal] HD-Plus 02 recognized
• 2018/12/01 17:53:12 1C2D3B2A r (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/12/01 17:53:12 1C2D3B2A r (reader) UM02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
• 2018/12/01 17:53:12 1C2D3B2A r (reader) UM02 [internal] Buffers readed 0 bytes total time_us 75148
• 2018/12/01 17:53:12 1C2D3B2A r (reader) UM02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/12/01 17:53:12 1C2D3B2A r (reader) UM02 [internal] Card responded ok for ifsd request of 251
• 2018/12/01 17:53:13 1C2D3B2A r (reader) UM02 [internal] detect native nagra card
• 2018/12/01 17:53:14 1C2D3B2A r (reader) UM02 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
• 2018/12/01 17:53:14 1C2D3B2A r (reader) UM02 [internal] card system not supported
• 2018/12/01 17:53:14 1C2D3B2A r (reader) UM02 [internal] Normal mode failed, reverting to Deprecated Mode
• 2018/12/01 17:53:16 1C2D3B2A r (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
• 2018/12/01 17:53:16 1C2D3B2A r (reader) UM02 [internal] HD-Plus 02 recognized
• 2018/12/01 17:53:16 1C2D3B2A r (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/12/01 17:53:16 1C2D3B2A r (reader) UM02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2018/12/01 17:53:16 1C2D3B2A r (reader) UM02 [internal] Buffers readed 0 bytes total time_us 75158
• 2018/12/01 17:53:16 1C2D3B2A r (reader) UM02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/12/01 17:53:18 1C2D3B2A r (reader) UM02 [internal] Warning: Card returned error on setting ifsd value to 251
• 2018/12/01 17:53:19 1C2D3B2A r (reader) UM02 [internal] detect native nagra card
• 2018/12/01 17:53:20 1C2D3B2A r (reader) UM02 [internal] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
• 2018/12/01 17:53:21 1C2D3B2A r (reader) UM02 [internal] T1 Resync command error, trying to reactivate!
• 2018/12/01 17:53:23 1C2D3B2A r (reader) UM02 [internal] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 30 36 12
• 2018/12/01 17:53:23 1C2D3B2A r (reader) UM02 [internal] HD-Plus 02 recognized
• 2018/12/01 17:53:23 1C2D3B2A r (reader) UM02 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
• 2018/12/01 17:53:23 1C2D3B2A r (reader) UM02 [internal] Calculated work ETU is 6.40 us reader mhz = 500
• 2018/12/01 17:53:23 1C2D3B2A r (reader) UM02 [internal] Buffers readed 0 bytes total time_us 75143
• 2018/12/01 17:53:23 1C2D3B2A r (reader) UM02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2018/12/01 17:53:23 1C2D3B2A r (reader) UM02 [internal] Card responded ok for ifsd request of 251
• 2018/12/01 17:53:24 1C2D3B2A r (reader) UM02 [internal] Negotiate sessionkey was not successful! Please check rsa key and boxkey
• 2018/12/01 17:53:24 1C2D3B2A r (reader) UM02 [internal] card system not supported
• 2018/12/01 17:53:24 1C2D3B2A r (reader) UM02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
• 2018/12/01 17:53:24 1C2D3B2A r (reader) UM02 [internal] card initializing error

 

[ghost0815]

Was für eine Oscam hast du installiert?
Eine mit Cardlist Patch? (Modern1524)

 

[ottl05]

Was für eine Oscam hast du installiert?
Eine mit Cardlist Patch? (Modern1524)

? cardlist patch?
du siehst mich etwas verwirrt.

ich habe diese installiert: enigma2-cams-oscam-modern-systemd_svn1524_mipsel.deb

 

[ottl05]

hab ein "update" auf enigma2-cams-oscam-modern-systemd_svn1525_mipsel.deb gemacht und ohne an der config was zu ändern sind wie es aussieht die Kanäle hell

Du musst Regestriert sein, um das angehängte Bild zusehen.

Karte wird jetzt als Kabel-BW V23 erkannt.

 

[ghost0815]

Dann lag es wohl an der Oscam Version.....