UM02 OScam card system not supported...

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Apr 11 18:02:43 2011
-------------------------------------------------------------------------------
2011/04/11 18:02:43 2618 s version=0.99.4svn, build #2900, system=mips-wrt54g-linux, nice=-1
2011/04/11 18:02:43 2618 s max. clients=29, client max. idle=120 sec
2011/04/11 18:02:43 2618 s max. logsize=10 Kb
2011/04/11 18:02:43 2618 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2011/04/11 18:02:43 2618 s shared memory initialized (size=495142, fd=3)
2011/04/11 18:02:43 2618 s auth size=4764
2011/04/11 18:02:43 2618 s services reloaded: 0 services freed, 4 services loaded
2011/04/11 18:02:43 2618 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2011/04/11 18:02:43 2618 s signal handling initialized (type=sysv)
2011/04/11 18:02:43 2618 s 562 service-id's loaded
2011/04/11 18:02:43 2618 s 1 provid's loaded
2011/04/11 18:02:43 2618 s 22 lengths for caid guessing loaded
2011/04/11 18:02:43 2619 s monitor: disabled
2011/04/11 18:02:43 2619 s camd 3.3x: disabled
2011/04/11 18:02:43 2619 s camd 3.5x: disabled
2011/04/11 18:02:43 2619 s cs378x: disabled
2011/04/11 18:02:44 2619 s newcamd: initialized (fd=7, port=34000, ip=127.0.0.1, crypted)
2011/04/11 18:02:44 2619 s CAID: 1838
2011/04/11 18:02:44 2619 s provid #0: 000401
2011/04/11 18:02:44 2619 s cccam: disabled
2011/04/11 18:02:44 2619 s radegast: disabled
2011/04/11 18:02:44 2619 s logger started (pid=2620)
2011/04/11 18:02:44 2619 s Resolver thread started
2011/04/11 18:02:44 2619 s http started (pid=2623)
2011/04/11 18:02:44 2619 s reader started (pid=2624, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/04/11 18:02:44 2619 s anti cascading disabled
2011/04/11 18:02:44 2619 s dvbapi: dvbapi disabled
2011/04/11 18:02:44 2623 h HTTP Server listening on port 3001
2011/04/11 18:02:48 2624 r02 card detected
2011/04/11 18:02:56 2624 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 32 65
2011/04/11 18:02:58 2624 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/04/11 18:03:00 2624 r02 detect native nagra card
2011/04/11 18:03:12 2624 r02 card system not supported
2011/04/11 18:03:12 2624 r02 Normal mode failed, reverting to Deprecated Mode
2011/04/11 18:03:20 2624 r02 ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 32 65
2011/04/11 18:03:21 2624 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/04/11 18:03:23 2624 r02 detect native nagra card
2011/04/11 18:03:36 2624 r02 card system not supported
2011/04/11 18:03:36 2624 r02 card initializing error

Zum Vergrößern anklicken....

OSCAM.SERVER
[reader]
label = UM02
# enable = 1
Protocol = mouse
detect = CD
device = /dev/ttyUSB0
group = 1
emmcache = 1,3,2
Fallback = 0
rsakey = B55***FF
boxkey = A7***7C
# cardmhz = 368
caid = 1838
ident = 1838:000401

Zum Vergrößern anklicken....

[global]
logfile = /tmp/oscam.log
cachedelay = 120
nice = -1
maxlogsize = 0

[newcamd]
port = 34000@1838:000401
serverip = 127.0.0.1
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

[webif]
httpport = 3001
httpuser = oscam
httppwd = passwort
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0
httpjsicons = 1

Zum Vergrößern anklicken....

[account]
user = user
pwd = pass
group = 1
au = 1
CAID = 1838

Zum Vergrößern anklicken....