Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

[paperinik]

Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!
configurazione oscam4803+cccam 2.1.3 per BH 0.11 per scheda Tivusat
salve a tutti chi mi da un aiutino per configurare la smargo al mio dream 7025?

MODE fixed
FREQ 3.69 Mhz
KERNEL Dreambox
T_MODE t = 0
EGT 0

SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3680000

N: 127.0.0.1 13500 xxxx xxxx 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

[reader]
Label = tivusat
Protocol = smartreader
device = /dev/usb/USB0
Detect = CD
Group = 2
Caid = 183d
Fallback = 0
mhz = 357
cardmhz = 368
emmcache = 1,1,2
disableserverfilter=0
rsakey = A9........................................................B5
[account]
User = xxxxxx
Pwd = xxxxxxx
Group = 2
IDENT = 183D:005411
CAID = 183D
AU = Tivusat
uniq = 0
monlevel = 4

[global]
waitforcards = 1
logfile = stdout
disablelog = 0
maxlogsize = 64
disableuserfile = 0
saveinithistory =1
preferlocalcards=1
clientdyndns = 1
cachedelay=1
# logging
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
showecmdw = 1
[newcamd]
key = 01.............................................14
port = 13500@183d:00005411
# camd3 sky italia
[cs357x]
Port = 34000@0919:000000
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi
pmt_mode = 0
[webif]
httpport = xxxx
httpuser = user
httppwd = pass
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

Datemi una mano per cortesia Ciao.

 

[paperinik]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

Ciao a tutti,
non c'e' nessuno che mi puoi aiutare?

Grazie!

 

[tinu1978]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

ciao papernik, metti un log del oscam forse si riesce cosi vedere che cosa che non va.

 

[paperinik]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

scusami ma X motivi di lavoro non ho piu´provare, ecco il log:

DVB: registering frontend 0 (ALPS-BSBE1-C/D01A DVB-S (STV0288))...
kobject_register failed for usbcore (-17)
Call Trace:
[<8025fcc4>] kobject_register+0x74/0x8c
[<8025fc7c>] kobject_register+0x2c/0x8c
[<8014baac>] load_module+0x1470/0x14c8
[<8014b9d4>] load_module+0x1398/0x14c8
[<80167944>] handle_mm_fault+0x258/0x660
[<80163c48>] vma_prio_tree_insert+0x28/0x5c
[<80110e84>] do_page_fault+0x2a4/0x3b0
[<80110e58>] do_page_fault+0x278/0x3b0
[<8016cae8>] do_mmap_pgoff+0x840/0x9b8
[<8016c990>] do_mmap_pgoff+0x6e8/0x9b8
[<8014d5d4>] sys_init_module+0xcc/0x8a8
[<8010ea40>] do_ri+0x2e4/0x304
[<8010fa20>] stack_done+0x20/0x3c
[<8010fa20>] stack_done+0x20/0x3c
usbcore: registered new driver rt73
kobject_register failed for usbcore (-17)
Call Trace:
[<8025fcc4>] kobject_register+0x74/0x8c
[<8025fc7c>] kobject_register+0x2c/0x8c
[<8014baac>] load_module+0x1470/0x14c8
[<8014b9d4>] load_module+0x1398/0x14c8
[<80167944>] handle_mm_fault+0x258/0x660
[<80163c48>] vma_prio_tree_insert+0x28/0x5c
[<80110e84>] do_page_fault+0x2a4/0x3b0
[<80110e58>] do_page_fault+0x278/0x3b0
[<8016cae8>] do_mmap_pgoff+0x840/0x9b8
[<8016c990>] do_mmap_pgoff+0x6e8/0x9b8
[<8014d5d4>] sys_init_module+0xcc/0x8a8
[<8010ea40>] do_ri+0x2e4/0x304
[<8010fa20>] stack_done+0x20/0x3c
[<8010fa20>] stack_done+0x20/0x3c

_____ ____ _ ____
|__ / _| _ \ / \ / ___|
/ / | | | | | |/ _ \ \___ \
/ /| |_| | |_| / ___ \ ___) |
/____\__, |____/_/ \_\____/
|___/
ZD1211B - version 2.22.0.0-development
usbcore: registered new driver zd1211b
3618 ms: 44
40 ms: 50
188 ms: 54
72 ms: 62
322 ms: 66
39 ms: 70
39 ms: 78
67 ms: 82
VIDEO_CLEAR_BUFFER, c0257700, c0259cd0
MPEG: Sequence header!
set new stc
xilleon_audio_j1_stc_discontinuity
state is idle, denying.
5746 ms: 86
541 ms: 88
379 ms: 90
211 ms: 92
65 ms: 94
70 ms: 96
419 ms: 98
231 ms: =s
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
7506 ms: 41 Starting /etc/rcS.d/S40networking...
142 ms: =s
664 ms: 49 Starting /etc/rcS.d/S98configure...
VIDEO_CLEAR_BUFFER, c0257700, c0259cd0
MPEG: Sequence header!
set new stc
xilleon_audio_j1_stc_discontinuity
state is idle, denying.
tsmux write 20
tsmux write 20
tsmux write 20
19573 ms: =s
24 ms: 50
575 ms: 50
101 ms: 51
65 ms: 51
1305 ms: 51
498 ms: 54
248 ms: 54
232 ms: 55
10 ms: 55
7 ms: 55
543 ms: 55
17 ms: 56
250 ms: 56
1005 ms: 57
757 ms: 59
54 ms: 60
6 ms: 60
7 ms: 60
64 ms: 60
32 ms: 60
1052 ms: 60
25 ms: 62
1676 ms: 62
35 ms: 65
34 ms: 66
7 ms: 66
14 ms: 66
1307 ms: 66
5027 ms: 68
17 ms: 77
460 ms: 77
6 ms: 78
145 ms: 78
18 ms: 79
14 ms: 79
20 ms: 79
34 ms: 79
49 ms: 79
7 ms: 79
986 ms: 79
30 ms: 81
set fb to 2(1)
set sb to 3(2)
set sb to 3(2)
set input to 0
set sb to 3(2)
set fb to 2(1)
44 ms: 81
21 ms: 81
75 ms: 81
412 ms: 81
92 ms: 82
scale_brightness: 3
scale_brightness: 15
86 ms: 82
1648 ms: 82
53 ms: 85
17 ms: 85
6970 ms: 85
wakeup_flags 00
209 ms: 99
scale_brightness: 15
scale_brightness: 15
69 ms: 99
63 ms: 99
21 ms: 99
scale_brightness: 15
clock pulling from pipe 0![pid_pcr_set] new filter for pcr (pid:0082, pipe:0)
SYNC: old: 1 -> new: 0 (requested: 3)
SYNC: old: 1 -> new: 0 (requested: 3)
[pid_pcr_set] new filter for pcr (pid:0082, pipe:0)
[xilleon_pcr_check_pid] nothing changed
audio_j1_streamtype_set(2)
[pid_pcr_set] new filter for pcr (pid:0082, pipe:0)
[xilleon_pcr_check_pid] nothing changed
SYNC: old: 0 -> new: 1 (requested: 3)
pcr extracted on pipe0, unit0!
SYNC: old: 1 -> new: 3 (requested: 3)
SYNC: old: 0 -> new: 3 (requested: 3)
PCR is soo far away that we cannot recover with clock pulling.
MPEG: Sequence header!
set sb to 3(2)
set sb to 3(2)
set sb to 3(2)
[AUDIO] enable sync
SYNC: old: 3 -> new: 2 (requested: 2)
scale_brightness: 15
SMCC GET_PARAMETERS
SMCC SET_PARAMETERS
SMCC SET_RESET
SMCC: BWT=5713931
SMCC: CWT=15996
SMCC GET_PARAMETERS
SMCC SET_PARAMETERS
SMCC GET_PARAMETERS
SMCC SET_PARAMETERS
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
ohci_hcd 0000:00:14.2: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS
hub 1-0:1.0: port 1, status 0101, change 0001, 12 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101
ohci_hcd 0000:00:14.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PE
S CCS
usb 1-1: new full speed USB device using ohci_hcd and address 2
ohci_hcd 0000:00:14.2: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PE
S CCS
usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: hotplug
usb 1-1: adding 1-1:1.0 (config #1, interface 0)
usb 1-1:1.0: hotplug
hub 1-1:1.0: usb_probe_interface
hub 1-1:1.0: usb_probe_interface - got id
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 7 ports detected
hub 1-1:1.0: standalone hub
hub 1-1:1.0: individual port power switching
hub 1-1:1.0: individual port over-current protection
hub 1-1:1.0: TT requires at most 16 FS bit times
hub 1-1:1.0: power on to power good time: 100ms
hub 1-1:1.0: local power source is good
hub 1-1:1.0: enabling power on all ports
hub 1-0:1.0: state 5 ports 2 chg 0000 evt 0002
hub 1-1:1.0: state 5 ports 7 chg 0000 evt 0000
scale_brightness: 15
set sb to 3(2)
scale_brightness: 15
set sb to 3(2)
hub 1-1:1.0: state 5 ports 7 chg 0000 evt 0020
hub 1-1:1.0: port 5, status 0101, change 0001, 12 Mb/s
hub 1-1:1.0: debounce: port 5: total 100ms stable 100ms status 0x101
usb 1-1.5: new full speed USB device using ohci_hcd and address 3
usb 1-1.5: ep0 maxpacket = 8
usb 1-1.5: skipped 3 descriptors after interface
usb 1-1.5: default language 0x0409
usb 1-1.5: new device strings: Mfr=0, Product=0, SerialNumber=3
usb 1-1.5: SerialNumber: Reader 221
usb 1-1.5: hotplug
usb 1-1.5: adding 1-1.5:1.0 (config #1, interface 0)
usb 1-1.5:1.0: hotplug
usbserial_generic 1-1.5:1.0: usb_probe_interface
usbserial_generic 1-1.5:1.0: usb_probe_interface - got id
ftdi_sio 1-1.5:1.0: usb_probe_interface
ftdi_sio 1-1.5:1.0: usb_probe_interface - got id
ftdi_sio 1-1.5:1.0: FTDI FT232BM Compatible converter detected
usb 1-1.5: FTDI FT232BM Compatible converter now attached to ttyUSB0
hub 1-1:1.0: state 5 ports 7 chg 0000 evt 0020
root@dm7025:~#

 

[paperinik]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

label=tivusat, device=/dev/ttyUSB0 smartreader+, detect=cd, mhz=357, cardmhz=368)
2011/04/10 9:26:40 xxxxxxxx r ERROR opening device /dev/ttyUSB0 smartreader+
2011/04/10 9:26:40 xxxxxxxx r Cannot open device: /dev/ttyUSB0 smartreader+
2011/04/10 9:27:41 xxxxxxxx r ERROR opening device /dev/ttyUSB0 smartreader+
2011/04/10 9:27:41 xxxxxxxx r Cannot open device: /dev/ttyUSB0 smartreader+

SMARGO. V.104

[reader]
Label = tivusat
Protocol = mouse
Device = /dev/ttyUSB0 smartreader+
Detect = CD
Group = 2
Caid = 183d
Fallback = 0
mhz = 357
cardmhz = 368
emmcache = 1,1,2
disableserverfilter=0
rsakey = A9...............................................B5

ecco un log

label=tivusat, device=/dev/ttyUSB0 smartreader+, detect=cd, mhz=357, cardmhz=368)
2011/04/10 9:59:07 xxxxxxxx r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/10 9:59:07 xxxxxxxx r recompile with SmartReader support.
2011/04/10 9:59:07 xxxxxxxx r Cannot open device: /dev/ttyUSB0 smartreader+
2011/04/10 10:00:07 xxxxxxxx r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/10 10:00:07 xxxxxxxx r recompile with SmartReader support.
2011/04/10 10:00:07 xxxxxxxx r Cannot open device: /dev/ttyUSB0 smartreader+
2011/04/10 10:01:07 xxxxxxxx r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/10 10:01:07 xxxxxxxx r recompile with SmartReader support.
2011/04/10 10:01:07 xxxxxxxx r Cannot open device: /dev/ttyUSB0 smartreader+
2011/04/10 10:02:07 xxxxxxxx r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2011/04/10 10:02:07 xxxxxxxx r recompile with SmartReader support.
2011/04/10 10:02:07 xxxxxxxx r Cannot open device: /dev/ttyUSB0 smartreader+

 

[alberto7]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

HI questo e lo Spaglio
Device = /dev/ttyUSB0 smartreader+
mhz = 357

DEVE ESERE COSI

Device = /dev/ttyUSB0
mhz = 500

il Resto e OK


E configura lo Smargo cosi
[FONT=&quot]Smargo
Mode = Autoswitch
Kernel = Normal
T-mode = T=0
ETG = 0

[/FONT]


SMARGO. V.104

[reader]
Label = tivusat
Protocol = mouse
Device = /dev/ttyUSB0 smartreader+
Detect = CD
Group = 2
Caid = 183d
Fallback = 0
mhz = 357
cardmhz = 368
emmcache = 1,1,2
disableserverfilter=0
rsakey = A9...............................................B 5

 

[paperinik]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

Alberto7 o provato ma non funziona, tui allego le Conf + il log

###############Smargo Tivusat1 ###############
SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3680000
N: 127.0.0.1 13500 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

[global]
waitforcards = 1
logfile = stdout
disablelog = 0
maxlogsize = 64
disableuserfile = 0
saveinithistory =1
preferlocalcards=1
clientdyndns = 1
cachedelay=1
# logging
pidfile = /var/run/oscam.pid
logfile = /var/log/oscam.log
usrfile = /var/log/oscamuser.log
cwlogdir = /var/log/cw.log
showecmdw = 1
[newcamd]
kKey = 0102030405060708091011121314
port = 13500@183d:00005411
# camd3 sky italia
[cs357x]
Port = 34000@0919:000000
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi
pmt_mode = 0
[webif]
httpport = xxxx
httpuser = user
httppwd = pass
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

reader]
Label = tivusat
Protocol = mouse
Device = /dev/ttyUSB0 smartreader+
Detect = CD
Group = 2
Caid = 183d
Fallback = 0
Device = /dev/ttyUSB0
mhz = 500
emmcache = 1,1,2
disableserverfilter=0
tiger_rsakey = A9............................b5

oscam user
[account]
user = dummy
pwd = dummy
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 2
services =
caid = 183D
betatunnel =
ident = 183D:005411
cccmaxhops = 10
keepalive = 1
numusers = 0
penalty = 0

2011/04/13 22:21:22 xxxxxxxx s newcamd: initialized (fd=11, port=13500, crypted)
2011/04/13 22:21:22xxxxxxxx s CAID: 183D
2011/04/13 22:21:22 xxxxxxxx s provid #0: 005411
2011/04/13 22:21:22 xxxxxxxx s cccam: disabled
2011/04/13 22:21:22 2AAC94B0 s radegast: disabled
2011/04/13 22:21:22 xxxxxxxx s http disabled
2011/04/13 22:21:22 xxxxxxxx s creating thread for device /dev/ttyUSB0
2011/04/13 22:21:22 xxxxxxxx s loadbalancer: can't read from file /tmp/.oscam/stat
2011/04/13 22:21:22 xxxxxxxx s waiting for local card init
2011/04/13 22:21:22 xxxxxxxx r reader thread started (thread=2BD7D500, label=tivusat, device=/dev/ttyUSB0, detect=cd, mhz=500, cardmhz=357)
2011/04/13 22:21:22 xxxxxxxx r ERROR opening device /dev/ttyUSB0
2011/04/13 22:21:22 xxxxxxxx r Cannot open device: /dev/ttyUSB0
2011/04/13 22:22:23 xxxxxxxx r ERROR opening device /dev/ttyUSB0
2011/04/13 22:22:23 xxxxxxxx r Cannot open device: /dev/ttyUSB0
2011/04/13 22:23:23 xxxxxxxx r ERROR opening device /dev/ttyUSB0
2011/04/13 22:23:23 xxxxxxxx r Cannot open device: /dev/ttyUSB0

 

[alberto7]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

HI disattiva questo nella CCcam.cfg

SERIAL READER : /dev/ttyUSB0 smartreader+
SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3680000

Non devi Attivare il Card Reader nella CCcam.cfg altrimendi va in conflitto perche sia la oscam che la CCcam cecano di leggere la Carda

Devi mettere davandi un Raut Cosi # per disativarlo nella CCam.cfg

#SERIAL READER : /dev/ttyUSB0 smartreader+
#SMARTCARD CLOCK FREQUENCY: /dev/ttyUSB0 3680000

e qua ci manca il cardmhz e devi scangelare smartreader+ e tiger_ de lo anche scritto che deve esere cosi Device = /dev/ttyUSB0 e rsakey = A9............................b5


[reader]
Label = tivusat
Protocol = mouse
Device = /dev/ttyUSB0
Detect = CD
Group = 2
Caid = 183d
Fallback = 0
Device = /dev/ttyUSB0
mhz = 500
cardmhz = 369
emmcache = 1,1,2
disableserverfilter=0
rsakey = A9............................b5


E questo nella Oscam.conf

nice = -1

 

[luca1997]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

hat jemand hier für meinen Italy Freund eine einstellung für die sachen den er mag in seinem smargo die tivusat benutzen mit cccam /osacam und d09 geht bei ihm schon dan mir :emoticon-0141-whew:

nur die tivu will nicht...

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

 

[alberto7]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

HI luca1997

#Oscam.config

[global]
usrfile = 1
usrfileflag = 1
disablelog = 0
disableuserfile = 0
usrfileflag = 1
usrfile = /var/log/oscam/oscamuser.log
logfile = /var/log/oscam/oscam.log
cachedelay = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
clientdyndns = 1
Readerentitlements = 1
clientmaxidle = 60
cachedelay = 400
bindwait = 20
maxlogsize = 5000


[newcamd]
Port = 34000@1830:3411,0,8011;34001@1834:0;34002@183d:005 411
key = 0102030405060708091011121314
keepalive = 1
mgclient = 0
allowed = 127.0.0.1,192.168.178.33-192.168.255.255


[webif]
httpport = 16010
httpuser = user
httppwd = pass
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpreadonly = 1

[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 2
appendchaninfo = 1


#Oscam.server

[reader]
label = tivusat
enable = 1
protocol = mouse
device = /dev/ttyUSB0
#protocol = smartreader
#device = 001:007
services = mm_tivusat,sa_tivusat
caid = 183D
ident = 183D:005411,000000
rsakey = A92DA72FEEACF294************4D8164B5
detect = cd
nagra_read = 2
mhz = 500
cardmhz = 369
group = 2
emmcache = 1,3,15
savenano = all
auprovid = 005411
provid = 005411

#oscam.user

[account]
disabled = 0
user = localtvsat
pwd = localtvsat
group = 2
uniq = 0
monlevel = 4
AU = tivusat
services = mm_tivusat,sa_tivusat
caid = 183D
ident = 183d:005411,000000
keepalive = 1

#oscam.srvid
#TivùSat
############################################################
################# TivùSat #################
############################################################

#TivùSat
183D:213F|TivùSat|RaiUno|TV|mm_tivusat
183D:2140|TivùSat|RaiDue|TV|mm_tivusat
183D:2141|TivùSat|RaiTre|TV|mm_tivusat
183D:0003|TivùSat|Retequattro|TV|mm_tivusat
183D:0002|TivùSat|Canale_5|TV|mm_tivusat
183D:0001|TivùSat|Italia_1|TV|mm_tivusat
183D:1C54|TivùSat|LA5|TV|mm_tivusat
183D:0E1E|TivùSat|LA7|TV|mm_tivusat
183D:2136|TivùSat|Rai_Movie|TV|mm_tivusat
183D:0004|TivùSat|Iris|TV|mm_tivusat
183D:0CEA|TivùSat|Rai_Premium|TV|mm_tivusat
183D:0D52|TivùSat|Rai_5|TV|mm_tivusat
183D:2142|TivùSat|Rai_4|TV|mm_tivusat
183D:0CED|TivùSat|TV2000|TV|mm_tivusat
183D:0CE9|TivùSat|Rai_Sport_1|TV|mm_tivusat
183D:0CE5|TivùSat|Rai_Sport_2|TV|mm_tivusat
183D:0CEB|TivùSat|Rai_Storia|TV|mm_tivusat
183D:0D4E|TivùSat|Rai_Scuola|TV|mm_tivusat
183D:0D66|TivùSat|Rai_YoYo|TV|mm_tivusat
183D:0CEE|TivùSat|Rai_Gulp|TV|mm_tivusat
183D:0006|TivùSat|Boing|TV|mm_tivusat
183D:3A0B|TivùSat|K2|TV|mm_tivusat
183D:0CE5|TivùSat|Rai_News|TV|mm_tivusat
183D:2013|TivùSat|Euronews|TV|mm_tivusat
183D:4205|TivùSat|AB_Channel|TV|mm_tivusat
183D:0E23|TivùSat|Nessuno_TV|TV|mm_tivusat
183D:127A|TivùSat|PLAY_TV_ITALIA|TV|mm_tivusat
183D:01EF|TivùSat|Mediashopping|TV|mm_tivusat
183D:200C|TivùSat|BBC_World_News|TV|mm_tivusat
183D:1C86|TivùSat|Bloomberg_European_TV|TV|mm_tivusat
183D:3619|TivùSat|France24|TV|mm_tivusat
183D:358E|TivùSat|TVE_International|TV|mm_tivusat
183D:44DD|TivùSat|Russia_Today|TV|mm_tivusat

#oscam.services

# TivuSat
[mm_tivusat]
caid = 183D
provid = 005411,000000
srvid = 213F,2140,2141,0003,0002,0001,0E1E,0C83,2136,0004,0CEA,2142,0D52,0007,44C1,2D02,2FEC,066B,0CED,0313,4205,34CC,0278,0E25,132E,0CE9,0CE5,0E30,0310,0279,0CEB,0D4E,29D0,1D2D,0D66,0CEE,3A0B,2144,030F,2013,0730,06AD,1C86,200C,3619,361A,025F,44DD,06AA,02C4,06B2,1F08,0E23

[sa_tivusat]
caid = 183D
provid = 005411,000000
srvid = 213F,2140,2141,0003,0002,0001,0E1E,0C83,2136,0004,0CEA,2142,0D52,0007,44C1,2D02,2FEC,066B,0CED,0313,4205,34CC,0278,0E25,132E,0CE9,0CE5,0E30,0310,0279,0CEB,0D4E,29D0,1D2D,0D66,0CEE,3A0B,2144,030F,2013,0730,06AD,1C86,200C,3619,361A,025F,44DD,06AA,02C4,06B2,1F08,0E23

# CCcam.cfg

N: 127.0.0.1 34002 localtvsat localtvsat 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256 #mit CCcam.2.1.3

N: 127.0.0.1 34002 localtvsat localtvsat 01 02 03 04 05 06 07 08 09 10 11 12 13 14 #Ab CCcam.2.1.4

 

[luca1997]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

vielen dank werde ich morgen früh bei Ihm testen

er hat den smargo im hub und an einer dreambox 8000 mit dem aktuellen ivcvs image am laufen

 

[luca1997]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

das geht leider so genau bei Ihm nicht...wird im oscam log nicht angezeigt und im cccam log bei newcamd auch nicht !!!

woran kanns liegen

 

[alberto7]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

Zeiche mal deine Oscam log und CCcam Log ??????

 

[luca1997]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

Du musst dich Anmelden oder Registrieren um den Inhalt der Angebote zu sehen!

2011/04/16 12:05:17 2E50B4B0 c tivu (183D&1F1F1F/0CEA/8C:4237): rejected user ident (121 ms) (of 0 avail 0) - 183D:0CEA unknown (no card support 183D:1
2011/04/16 12:05:20 2D50B4B0 c client connected to 34000 port



|127.0.0.1:34002 |00d 00:09:00|newcamd| | | 1 |local 183d:000000 140(0)

 

[alberto7]

AW: Tivusat+Smargo con Oscam/Cccam..sto Impazzendo!

HI Mit welche Oscam Version ?? du solt mehr Info Vom Oscam Log geben