Tivusat in Oscam card system not supported!?!?!?!

[amassidda]

Hallo Leute

möchte gerne meine Tivusat Karte in Oscam lesen.

Leider ohne Erfolg. Ich poste mal meine Config, und Server hier rein. Vieleicht findet ihr den Fehler.

Oscam.config:

Spoiler

[global]
serverip = 127.0.0.1
logfile = stdout
nice = -1
preferlocalcards = 1
saveinithistory = 1
WaitForCards = 1
cachedelay = 120
maxlogsize = 512


[monitor]
port = 0
nocrypt =
aulow = 30
hideclient_to = 15
monlevel = 1
appendchaninfo = 0

[newcamd]
port = 34005@0D05:000004,000008,000010,00000C
serverip = 127.0.0.1
key = 0102030405060708091011121314
allowed =
keepalive = 1
mgclient = 0

Oscam.server:

Spoiler

[reader]
label = orf
enable = 1
protocol = smargo
device = /dev/ttyUSB2
services = orf,austria,orfcw
caid = 0D05
detect = cd
mhz = 357
cardmhz = 960
group = 1
emmcache = 1,3,2


[reader]
label = tivusat
enable = 1
protocol = smargo
device = /dev/ttyUSB0
caid = 183D
rsakey =A92....4B5
detect = cd
mhz = 357
cardmhz = 357
ident = 183D:000000,005411
group = 1
emmcache = 1,3,2

Das hier steht im Oscam Log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Apr 9 14:46:02 2012
-------------------------------------------------------------------------------
2012/04/09 14:46:02 B75438D0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4896 (i686-pc-linux)
2012/04/09 14:46:02 B75438D0 s version=1.00-unstable_svn, build #4896, system=i686-pc-linux, nice=-1
2012/04/09 14:46:02 B75438D0 s client max. idle=120 sec, debug level=0
2012/04/09 14:46:02 B75438D0 s max. logsize=512 Kb
2012/04/09 14:46:02 B75438D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/04/09 14:46:02 B75438D0 s auth size=5004
2012/04/09 14:46:02 B75438D0 s services reloaded: 0 services freed, 53 services loaded
2012/04/09 14:46:02 B75438D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/04/09 14:46:02 B75438D0 s signal handling initialized (type=sysv)
2012/04/09 14:46:02 B75438D0 s 2254 service-id's loaded
2012/04/09 14:46:02 B75438D0 s can't open file "/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2012/04/09 14:46:02 B75438D0 s 61 provid's loaded
2012/04/09 14:46:02 B75438D0 s can't open file "/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2012/04/09 14:46:02 B75438D0 s monitor: disabled
2012/04/09 14:46:02 B75438D0 s camd33: disabled
2012/04/09 14:46:02 B75438D0 s camd35: disabled
2012/04/09 14:46:02 B75438D0 s cs378x: disabled
2012/04/09 14:46:02 B75438D0 s newcamd: initialized (fd=7, port=34005, ip=127.0.0.1, crypted)
2012/04/09 14:46:02 B75438D0 s CAID: 0D05
2012/04/09 14:46:02 B75438D0 s provid #0: 000004
2012/04/09 14:46:02 B75438D0 s provid #1: 000008
2012/04/09 14:46:02 B75438D0 s provid #2: 000010
2012/04/09 14:46:02 B75438D0 s provid #3: 00000C
2012/04/09 14:46:02 B75438D0 s cccam: disabled
2012/04/09 14:46:02 B75438D0 s radegast: disabled
2012/04/09 14:46:02 B75438D0 s http thread started
2012/04/09 14:46:02 B75438D0 s creating thread for device /dev/ttyUSB2
2012/04/09 14:46:02 B75438D0 s creating thread for device /dev/ttyUSB0
2012/04/09 14:46:02 B75438D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/04/09 14:46:02 B75438D0 s waiting for local card init
2012/04/09 14:46:02 B6D21B70 r reader thread started (thread=B6D21B70, label=tivusat, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/04/09 14:46:02 B6D21B70 r smargo init
2012/04/09 14:46:02 B7522B70 r reader thread started (thread=B7522B70, label=orf, device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=960)
2012/04/09 14:46:02 B7522B70 r smargo init
2012/04/09 14:46:02 B7529280 h HTTP Server listening on port 22000
2012/04/09 14:46:03 B6D21B70 r tivusat card detected
2012/04/09 14:46:03 B7522B70 r orf card detected
2012/04/09 14:46:05 B7522B70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 14:46:06 B7522B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 14:46:07 B7522B70 r [cryptoworks-reader] card detected
2012/04/09 14:46:07 B7522B70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 14:46:08 B7522B70 r card system not supported
2012/04/09 14:46:08 B7522B70 r Normal mode failed, reverting to Deprecated Mode
2012/04/09 14:46:10 B7522B70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 14:46:11 B7522B70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 14:46:12 B7522B70 r [cryptoworks-reader] card detected
2012/04/09 14:46:12 B7522B70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 14:46:12 B7522B70 r type: CryptoWorks, caid: 0D05, ascii serial: xxxxxxxx, hex serial: xxxxxxxx
2012/04/09 14:46:12 B7522B70 r issuer: ORF Cryptoworks, id: 8C, bios: v3, pin: unknown, mfid: 3F20
2012/04/09 14:46:12 B7522B70 r providers: 0 ()
2012/04/09 14:46:12 B7522B70 r found cardsystem cryptoworks
2012/04/09 14:46:12 B7522B70 r [cryptoworks-reader] ready for requests
2012/04/09 14:46:13 B6D21B70 r Error activating card.
2012/04/09 14:46:21 B6D21B70 r Error activating card.
2012/04/09 14:46:32 B6D21B70 r Error activating card.
2012/04/09 14:46:32 B6D21B70 r card initializing error
2012/04/09 14:46:32 B75438D0 s init for all local cards done
2012/04/09 14:46:32 B75438D0 s anti cascading disabled

Hoffe ihr könnt mir weiterhelfen

danke im voraus

gruß

amassidda

RSA + Boxkey + Serial zensiert by meister85

 

[ersin328]

hir müste einen abstand sein rsakey =A
rsakey = A richtig.


und wo ist das boxkey ??

 

[amassidda]

So habe es jetzt verbessert geht aber immer noch nicht

Hier die verbesserte oscam.server

Spoiler

[reader]
label = orf
enable = 1
protocol = smargo
device = /dev/ttyUSB2
services = orf,austria,orfcw
caid = 0D05
detect = cd
mhz = 357
cardmhz = 960
group = 1
emmcache = 1,3,2


[reader]
label = tivusat
enable = 1
protocol = smargo
device = /dev/ttyUSB0
caid = 183D
rsakey = A92.....B5
boxkey = 37.....37
detect = cd
mhz = 357
cardmhz = 357
ident = 183D:000000,005411
group = 1
emmcache = 1,3,2

Und hier jetzt der neue Log:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Apr 9 14:57:38 2012
-------------------------------------------------------------------------------
2012/04/09 14:57:38 B75008D0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4896 (i686-pc-linux)
2012/04/09 14:57:38 B75008D0 s version=1.00-unstable_svn, build #4896, system=i686-pc-linux, nice=-1
2012/04/09 14:57:38 B75008D0 s client max. idle=120 sec, debug level=0
2012/04/09 14:57:38 B75008D0 s max. logsize=512 Kb
2012/04/09 14:57:38 B75008D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/04/09 14:57:38 B75008D0 s auth size=5004
2012/04/09 14:57:38 B75008D0 s services reloaded: 0 services freed, 53 services loaded
2012/04/09 14:57:38 B75008D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/04/09 14:57:38 B75008D0 s signal handling initialized (type=sysv)
2012/04/09 14:57:38 B75008D0 s 2254 service-id's loaded
2012/04/09 14:57:38 B75008D0 s can't open file "/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2012/04/09 14:57:38 B75008D0 s 61 provid's loaded
2012/04/09 14:57:38 B75008D0 s can't open file "/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2012/04/09 14:57:38 B75008D0 s monitor: disabled
2012/04/09 14:57:38 B75008D0 s camd33: disabled
2012/04/09 14:57:38 B75008D0 s camd35: disabled
2012/04/09 14:57:38 B75008D0 s cs378x: disabled
2012/04/09 14:57:38 B75008D0 s newcamd: initialized (fd=7, port=34005, ip=127.0.0.1, crypted)
2012/04/09 14:57:38 B75008D0 s CAID: 0D05
2012/04/09 14:57:38 B75008D0 s provid #0: 000004
2012/04/09 14:57:38 B75008D0 s provid #1: 000008
2012/04/09 14:57:38 B75008D0 s provid #2: 000010
2012/04/09 14:57:38 B75008D0 s provid #3: 00000C
2012/04/09 14:57:38 B75008D0 s cccam: disabled
2012/04/09 14:57:38 B75008D0 s radegast: disabled
2012/04/09 14:57:38 B75008D0 s http thread started
2012/04/09 14:57:38 B75008D0 s creating thread for device /dev/ttyUSB2
2012/04/09 14:57:38 B75008D0 s creating thread for device /dev/ttyUSB0
2012/04/09 14:57:38 B75008D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/04/09 14:57:38 B75008D0 s waiting for local card init
2012/04/09 14:57:38 B6CDEB70 r reader thread started (thread=B6CDEB70, label=tivusat, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/04/09 14:57:38 B6CDEB70 r smargo init
2012/04/09 14:57:38 B74DFB70 r reader thread started (thread=B74DFB70, label=orf, device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=960)
2012/04/09 14:57:38 B74DFB70 r smargo init
2012/04/09 14:57:38 B74E6280 h HTTP Server listening on port 22000
2012/04/09 14:57:39 B74DFB70 r orf card detected
2012/04/09 14:57:39 B6CDEB70 r tivusat card detected
2012/04/09 14:57:41 B74DFB70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 14:57:42 B74DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 14:57:43 B74DFB70 r [cryptoworks-reader] card detected
2012/04/09 14:57:43 B74DFB70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 14:57:44 B74DFB70 r card system not supported
2012/04/09 14:57:44 B74DFB70 r Normal mode failed, reverting to Deprecated Mode
2012/04/09 14:57:45 B6CDEB70 r ATR: 3F 95 00 FF 91 81 71 FF 47 00 54 47 52 30 33 52 65 32 30
2012/04/09 14:57:45 B6CDEB70 r Specific mode: speed 'implicitly defined', not sure how to proceed, assuming default values
2012/04/09 14:57:45 B6CDEB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 14:57:46 B74DFB70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 14:57:47 B74DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 14:57:48 B74DFB70 r [cryptoworks-reader] card detected
2012/04/09 14:57:48 B74DFB70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 14:57:48 B74DFB70 r type: CryptoWorks, caid: 0D05, ascii serial: xxxxxxxx, hex serial: xxxxxxxxxxx
2012/04/09 14:57:48 B6CDEB70 r card system not supported
2012/04/09 14:57:48 B6CDEB70 r Normal mode failed, reverting to Deprecated Mode
2012/04/09 14:57:48 B74DFB70 r issuer: ORF Cryptoworks, id: 8C, bios: v3, pin: unknown, mfid: 3F20
2012/04/09 14:57:48 B74DFB70 r providers: 0 ()
2012/04/09 14:57:48 B74DFB70 r found cardsystem cryptoworks
2012/04/09 14:57:48 B74DFB70 r [cryptoworks-reader] ready for requests
2012/04/09 14:57:56 B6CDEB70 r Error activating card.
2012/04/09 14:58:07 B6CDEB70 r Error activating card.
2012/04/09 14:58:12 B6CDEB70 r ATR is malformed, it reports 15 historical bytes but there are only 6
2012/04/09 14:58:12 B6CDEB70 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30
2012/04/09 14:58:12 B6CDEB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 14:58:13 B6CDEB70 r detect nagra tiger card
2012/04/09 14:58:23 B6CDEB70 r card system not supported
2012/04/09 14:58:23 B6CDEB70 r card initializing error
2012/04/09 14:58:23 B75008D0 s init for all local cards done
2012/04/09 14:58:23 B75008D0 s anti cascading disabled

Hoffe ihr habt mir noch ein paar tipps

danke im voraus

gruß

amassidda

RSA + Boxkey + Serial zensiert by meister85

 

[toni1968]

mach mal beim protocol mouse statt smargo
und zwei gruppen bein radern
gruppe 1 orf
gruppe 2 tivusat

 

[amassidda]

Geht leider immer noch nicht

Hier der neue LOG:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Apr 9 15:06:54 2012
-------------------------------------------------------------------------------
2012/04/09 15:06:54 B75008D0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4896 (i686-pc-linux)
2012/04/09 15:06:54 B75008D0 s version=1.00-unstable_svn, build #4896, system=i686-pc-linux, nice=-1
2012/04/09 15:06:54 B75008D0 s client max. idle=120 sec, debug level=0
2012/04/09 15:06:54 B75008D0 s max. logsize=512 Kb
2012/04/09 15:06:54 B75008D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/04/09 15:06:54 B75008D0 s auth size=5004
2012/04/09 15:06:54 B75008D0 s services reloaded: 0 services freed, 53 services loaded
2012/04/09 15:06:54 B75008D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/04/09 15:06:54 B75008D0 s signal handling initialized (type=sysv)
2012/04/09 15:06:54 B75008D0 s 2254 service-id's loaded
2012/04/09 15:06:54 B75008D0 s can't open file "/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2012/04/09 15:06:54 B75008D0 s 61 provid's loaded
2012/04/09 15:06:54 B75008D0 s can't open file "/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2012/04/09 15:06:54 B75008D0 s monitor: disabled
2012/04/09 15:06:54 B75008D0 s camd33: disabled
2012/04/09 15:06:54 B75008D0 s camd35: disabled
2012/04/09 15:06:54 B75008D0 s cs378x: disabled
2012/04/09 15:06:54 B75008D0 s newcamd: initialized (fd=7, port=34005, ip=127.0.0.1, crypted)
2012/04/09 15:06:54 B75008D0 s CAID: 0D05
2012/04/09 15:06:54 B75008D0 s provid #0: 000004
2012/04/09 15:06:54 B75008D0 s provid #1: 000008
2012/04/09 15:06:54 B75008D0 s provid #2: 000010
2012/04/09 15:06:54 B75008D0 s provid #3: 00000C
2012/04/09 15:06:54 B75008D0 s cccam: disabled
2012/04/09 15:06:54 B75008D0 s radegast: disabled
2012/04/09 15:06:54 B75008D0 s http thread started
2012/04/09 15:06:54 B75008D0 s creating thread for device /dev/ttyUSB2
2012/04/09 15:06:54 B75008D0 s creating thread for device /dev/ttyUSB0
2012/04/09 15:06:54 B75008D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/04/09 15:06:54 B75008D0 s waiting for local card init
2012/04/09 15:06:54 B6CDEB70 r reader thread started (thread=B6CDEB70, label=tivusat, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2012/04/09 15:06:54 B74DFB70 r reader thread started (thread=B74DFB70, label=orf, device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=960)
2012/04/09 15:06:54 B74DFB70 r smargo init
2012/04/09 15:06:54 B74E6280 h HTTP Server listening on port 22000
2012/04/09 15:06:54 B74DFB70 r orf card detected
2012/04/09 15:06:56 B74DFB70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 15:06:57 B6CDEB70 r tivusat card detected
2012/04/09 15:06:58 B74DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 15:06:59 B74DFB70 r [cryptoworks-reader] card detected
2012/04/09 15:06:59 B74DFB70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 15:07:00 B74DFB70 r card system not supported
2012/04/09 15:07:00 B74DFB70 r Normal mode failed, reverting to Deprecated Mode
2012/04/09 15:07:02 B74DFB70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 15:07:03 B74DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 15:07:04 B74DFB70 r [cryptoworks-reader] card detected
2012/04/09 15:07:04 B74DFB70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 15:07:04 B74DFB70 r type: CryptoWorks, caid: 0D05, ascii serial: xxxxxxxx, hex serial: xxxxxxxxx
2012/04/09 15:07:04 B74DFB70 r issuer: ORF Cryptoworks, id: 8C, bios: v3, pin: unknown, mfid: 3F20
2012/04/09 15:07:04 B74DFB70 r providers: 0 ()
2012/04/09 15:07:04 B74DFB70 r found cardsystem cryptoworks
2012/04/09 15:07:04 B74DFB70 r [cryptoworks-reader] ready for requests
2012/04/09 15:07:05 B6CDEB70 r Error activating card.
2012/04/09 15:07:13 B6CDEB70 r ATR: 30 47 45 3F FF 00 FF 91 81 71
2012/04/09 15:07:13 B6CDEB70 r ERROR: Could not read reader->convention
2012/04/09 15:07:13 B6CDEB70 r Error activating card.
2012/04/09 15:07:21 B6CDEB70 r ATR: E3 03 00 56 FF
2012/04/09 15:07:21 B6CDEB70 r ERROR: Could not read reader->convention
2012/04/09 15:07:21 B6CDEB70 r Error activating card.
2012/04/09 15:07:22 B6CDEB70 r card initializing error
2012/04/09 15:07:22 B75008D0 s init for all local cards done
2012/04/09 15:07:22 B75008D0 s anti cascading disabled

Und die neue Oscam.server:

Spoiler

[reader]
label = orf
enable = 1
protocol = smargo
device = /dev/ttyUSB2
services = orf,austria,orfcw
caid = 0D05
detect = cd
mhz = 357
cardmhz = 960
group = 1
emmcache = 1,3,2


[reader]
label = tivusat
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 183D
rsakey = A9......64B5
boxkey = 37.......37
detect = cd
mhz = 357
cardmhz = 357
ident = 183D:000000,005411
group = 2
emmcache = 1,3,2

ich bin am verzweifeln

danke im voraus

gruß

amassidda

RSA + Boxkey + Serial zensiert by meister85

 

[GTD Bastion]

Welchen Kartenleser benutzt du?

 

[ersin328]

deine orf karte geht oder ???

DU HAST RSAkey wo ist dann das boxkey

 

[amassidda]

@ersin328

boxkey ist drinne der ist der hier:

boxkey = 37.....37

@T1x

Ich habe einen Smargo+ mit Softversion 1.7

danke für eure Hilfe

gruß

amassidda

 

[ersin328]

OK DEIN ORF Karte geht sie den auch nicht ??

 

[amassidda]

Die ORF Karte funktioniert 100%

steht auch CARDOK dran

Und bei der Tivusat steht ERROR dran

Achso habe oben vergessen die Smarosetting zu posten die sehen so aus:

MODE= AUTO
FREQUENCY= 3,69
KERNELTYPE= NEW
T MODE= 0
EGT= 0

Hoffe das hilft auch

danke im voraus

gruß

amassidda

 

[ersin328]

also wenn deine orf karte geht endere porotocol wieder auf smargo .

dann probiere mal cardmhz und mhz auf 368 und starte oscam neu.

 

[amassidda]

Immer noch ERROR bei Tivusat

Jetzt sieht die oscam.server so aus:

Spoiler

[reader]
label = orf
enable = 1
protocol = smargo
device = /dev/ttyUSB2
services = orf,austria,orfcw
caid = 0D05
detect = cd
mhz = 357
cardmhz = 960
group = 1
emmcache = 1,3,2


[reader]
label = tivusat
enable = 1
protocol = smargo
device = /dev/ttyUSB0
caid = 183D
rsakey = A9....B5
boxkey = 37.....37
detect = cd
mhz = 368
cardmhz = 368
ident = 183D:000000,005411
group = 2
emmcache = 1,3,2

und das ist der neue LOG:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Mon Apr 9 15:29:32 2012
-------------------------------------------------------------------------------
2012/04/09 15:29:32 B75008D0 s >> OSCam << cardserver started version 1.00-unstable_svn, build #4896 (i686-pc-linux)
2012/04/09 15:29:32 B75008D0 s version=1.00-unstable_svn, build #4896, system=i686-pc-linux, nice=-1
2012/04/09 15:29:32 B75008D0 s client max. idle=120 sec, debug level=0
2012/04/09 15:29:32 B75008D0 s max. logsize=512 Kb
2012/04/09 15:29:32 B75008D0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/04/09 15:29:32 B75008D0 s auth size=5004
2012/04/09 15:29:32 B75008D0 s services reloaded: 0 services freed, 53 services loaded
2012/04/09 15:29:32 B75008D0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2012/04/09 15:29:32 B75008D0 s signal handling initialized (type=sysv)
2012/04/09 15:29:32 B75008D0 s 2254 service-id's loaded
2012/04/09 15:29:32 B75008D0 s can't open file "/var/etc/oscam.tiers" (err=2), no tier-id's loaded
2012/04/09 15:29:32 B75008D0 s 61 provid's loaded
2012/04/09 15:29:32 B75008D0 s can't open file "/var/etc/oscam.ird" (errno=2) irdeto guessing not loaded
2012/04/09 15:29:32 B75008D0 s monitor: disabled
2012/04/09 15:29:32 B75008D0 s camd33: disabled
2012/04/09 15:29:32 B75008D0 s camd35: disabled
2012/04/09 15:29:32 B75008D0 s cs378x: disabled
2012/04/09 15:29:32 B75008D0 s newcamd: initialized (fd=7, port=34005, ip=127.0.0.1, crypted)
2012/04/09 15:29:32 B75008D0 s CAID: 0D05
2012/04/09 15:29:32 B75008D0 s provid #0: 000004
2012/04/09 15:29:32 B75008D0 s provid #1: 000008
2012/04/09 15:29:32 B75008D0 s provid #2: 000010
2012/04/09 15:29:32 B75008D0 s provid #3: 00000C
2012/04/09 15:29:32 B75008D0 s cccam: disabled
2012/04/09 15:29:32 B75008D0 s radegast: disabled
2012/04/09 15:29:32 B75008D0 s http thread started
2012/04/09 15:29:32 B75008D0 s creating thread for device /dev/ttyUSB2
2012/04/09 15:29:32 B75008D0 s creating thread for device /dev/ttyUSB0
2012/04/09 15:29:32 B75008D0 s loadbalancer: can't read from file /tmp/.oscam/stat
2012/04/09 15:29:32 B75008D0 s waiting for local card init
2012/04/09 15:29:32 B6CDEB70 r reader thread started (thread=B6CDEB70, label=tivusat, device=/dev/ttyUSB0, detect=cd, mhz=368, cardmhz=368)
2012/04/09 15:29:32 B6CDEB70 r smargo init
2012/04/09 15:29:32 B74DFB70 r reader thread started (thread=B74DFB70, label=orf, device=/dev/ttyUSB2, detect=cd, mhz=357, cardmhz=960)
2012/04/09 15:29:32 B74DFB70 r smargo init
2012/04/09 15:29:32 B74E6280 h HTTP Server listening on port 22000
2012/04/09 15:29:33 B6CDEB70 r tivusat card detected
2012/04/09 15:29:33 B74DFB70 r orf card detected
2012/04/09 15:29:35 B74DFB70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 15:29:35 B6CDEB70 r ATR: 3F FF 95 00 FF 91 81 71 FF 47 00 54 49 47 45 52 30 30 33 20 52 65 76 32 35 30 64
2012/04/09 15:29:36 B6CDEB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2012/04/09 15:29:36 B74DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 15:29:37 B6CDEB70 r detect nagra tiger card
2012/04/09 15:29:37 B74DFB70 r [cryptoworks-reader] card detected
2012/04/09 15:29:37 B74DFB70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 15:29:38 B74DFB70 r card system not supported
2012/04/09 15:29:38 B74DFB70 r Normal mode failed, reverting to Deprecated Mode
2012/04/09 15:29:40 B74DFB70 r ATR: 3B 78 12 00 00 A0 C4 03 07 8F F1 90 00
2012/04/09 15:29:41 B74DFB70 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2012/04/09 15:29:41 B6CDEB70 r card system not supported
2012/04/09 15:29:41 B6CDEB70 r Normal mode failed, reverting to Deprecated Mode
2012/04/09 15:29:42 B74DFB70 r [cryptoworks-reader] card detected
2012/04/09 15:29:42 B74DFB70 r [cryptoworks-reader] type: CryptoWorks
2012/04/09 15:29:42 B74DFB70 r type: CryptoWorks, caid: 0D05, ascii serial: xxxxxx, hex serial: xxxxxxx
2012/04/09 15:29:42 B74DFB70 r issuer: ORF Cryptoworks, id: 8C, bios: v3, pin: unknown, mfid: 3F20
2012/04/09 15:29:42 B74DFB70 r providers: 0 ()
2012/04/09 15:29:42 B74DFB70 r found cardsystem cryptoworks
2012/04/09 15:29:42 B74DFB70 r [cryptoworks-reader] ready for requests
2012/04/09 15:29:50 B6CDEB70 r Error activating card.
2012/04/09 15:30:00 B6CDEB70 r Error activating card.
2012/04/09 15:30:10 B6CDEB70 r Error activating card.
2012/04/09 15:30:11 B6CDEB70 r card initializing error
2012/04/09 15:30:11 B75008D0 s init for all local cards done
2012/04/09 15:30:11 B75008D0 s anti cascading disabled

Eigentlich sind doch alle einstellungen richtig oder?

Weiß nicht mehr weiter

danke im voraus

gruß

amassidda

RSA + Boxkey + Serial zensiert by meister85

 

[GTD Bastion]

Kartenleser falsch gejumpert?

 

[ersin328]

kenne die karte nicht aber neme mal ident raus starte oscam neu .

wenn dein rsakey boxkey passt dann sollte es gehen und wenn die caid passt .

 

[amassidda]

@T1x

Was ist gejumpert?

@ersin328

Habe Ident raus und RSA/BOX key nochmal geprüft stimmt alles geht aber immer noch nicht. Der Caid stimmt auch und ist 183D.

danke im voraus

gruß

amassidda