Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Diskussione Thread di diskussione su How-To Udev

    Nobody is reading this thread right now.
AW: Thread di diskussione su How-To Udev

ciao meister85 e per la configurazione cccam
il device come viene impostato
 
AW: Thread di diskussione su How-To Udev

stessa procedura di sopra How-to
 
AW: Thread di diskussione su How-To Udev

grz da quanto ho capito io questa conf

SERIAL READER : /dev/ttyUSB0 phoenix
SMARTCARD CLOCK FREQUENCY : /dev/ttyUSB0 3570000
TRY ALL CHIDS : /dev/ttyUSB0

e la devo modificare cosi giusto ho sbaglio

SERIAL READER : /dev/sceda1 phoenix
SMARTCARD CLOCK FREQUENCY : /dev/sceda1 3570000
TRY ALL CHIDS : /dev/sceda1
uso easymouse2
 
AW: Thread di diskussione su How-To Udev

Si giusto!


Gesendet von meinem iPad mit Tapatalk HD
 
AW: Thread di diskussione su How-To Udev

grazie per la risposta
 
AW: Thread di diskussione su How-To Udev

Ragazzi ma se ho due smargo devo modificare sempre lo stesso file? Io ho fatto in questo modo non va

Code: 
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="12345678", SYMLINK+="SkyItalia"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="87654321", SYMLINK+="Redlighter"

Ho fatto così e non si avvia niente ne l'uno ne l'altro ma se metto al secondo in oscam reader
device = /dev/ttyUSB1
il tutto funziona

Come mai non ne vuole sapere?
 
AW: Thread di diskussione su How-To Udev

Mi servono il seriale del reader per vedere se hai fatto tutto come spiegato nel how-to!
 
AW: Thread di diskussione su How-To Udev

Ecco

Code: 
root@debian / > udevadm info -n /dev/ttyUSB1 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6/1-2.6:1.0/ttyUSB1/tty/ttyUSB1':
    KERNEL=="ttyUSB1"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6/1-2.6:1.0/ttyUSB1':
    KERNELS=="ttyUSB1"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6/1-2.6:1.0':
    KERNELS=="1-2.6:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2.6':
    KERNELS=="1-2.6"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="938811"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="21"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="87654321"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-2':
    KERNELS=="1-2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="127"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="36627"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""
 
AW: Thread di diskussione su How-To Udev

No lì ho risolto ma se metto 2 reader non va. Uno alla vota si però, ecco perchè chiedevo se si doveva creare un altro file oppure no. Quindi credo che la funzione UDEV va benissimo per questo ho detto che era risolto, ma ciò non toglie che oscam non me lo apre insieme agli altri reader va in blocco ma uno alla volta si, non so se mi sono spiegato bene, infatti nell'altro thread che ho aperto riguardo configurazione 3 smargo, SKYItalia, Redlight e tivusat li sto facendo partire nel modo seguente:

Skyitalia = device UDEV
Redlight = device ttyUSB1
Tivusat = device ttyUSB2

Spero di essere stato chiaro, in pratica vorrei far partire tutti con i comandi UDEV tutto qua, allora per non fermarmi su punti fissi, per 3 problematiche ho aperto altrettanti thread, e spero di aver fatto cosa gradita
 
AW: Thread di diskussione su How-To Udev

Postami tutt e tre seriali.
 
meister85 schrieb:
Postami tutt e tre seriali.
Zum Vergrößern anklicken....

Ok però mi interesserebbe anche far partire tivusat

Inviato dal mio GT-I9300 con Tapatalk 2

Code: 
root@debian / > ls -l /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 1 21 feb 23.34 /dev/ttyUSB1
crw-rw---- 1 root dialout 188, 2 21 feb 23.34 /dev/ttyUSB2
crw-rw---- 1 root dialout 188, 3 21 feb 23.34 /dev/ttyUSB3

Primo seriale
Code: 
root@debian / > udevadm info -n /dev/ttyUSB1 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5/1-4.5:1.0/ttyUSB1/tty/ttyUSB1':
    KERNEL=="ttyUSB1"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5/1-4.5:1.0/ttyUSB1':
    KERNELS=="ttyUSB1"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5/1-4.5:1.0':
    KERNELS=="1-4.5:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.5':
    KERNELS=="1-4.5"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="6"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="87654321"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4':
    KERNELS=="1-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="117"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="49"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

Secondo seriale
Code: 
root@debian / > udevadm info -n /dev/ttyUSB2 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6/1-4.6:1.0/ttyUSB2/tty/ttyUSB2':
    KERNEL=="ttyUSB2"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6/1-4.6:1.0/ttyUSB2':
    KERNELS=="ttyUSB2"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6/1-4.6:1.0':
    KERNELS=="1-4.6:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.6':
    KERNELS=="1-4.6"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="7"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="abcd1234"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4':
    KERNELS=="1-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="117"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="49"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""

Terzo seriale
Code: 
root@debian / > udevadm info -n /dev/ttyUSB3 -a

Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.

  looking at device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7/1-4.7:1.0/ttyUSB3/tty/ttyUSB3':
    KERNEL=="ttyUSB3"
    SUBSYSTEM=="tty"
    DRIVER==""

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7/1-4.7:1.0/ttyUSB3':
    KERNELS=="ttyUSB3"
    SUBSYSTEMS=="usb-serial"
    DRIVERS=="ftdi_sio"
    ATTRS{latency_timer}=="1"
    ATTRS{port_number}=="0"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7/1-4.7:1.0':
    KERNELS=="1-4.7:1.0"
    SUBSYSTEMS=="usb"
    DRIVERS=="ftdi_sio"
    ATTRS{bInterfaceNumber}=="00"
    ATTRS{bAlternateSetting}==" 0"
    ATTRS{bNumEndpoints}=="02"
    ATTRS{bInterfaceClass}=="ff"
    ATTRS{bInterfaceSubClass}=="ff"
    ATTRS{bInterfaceProtocol}=="ff"
    ATTRS{modalias}=="usb:v0403p6001d0400dc00dsc00dp00icFFiscFFipFF"
    ATTRS{supports_autosuspend}=="0"
    ATTRS{interface}=="Smartreader plus"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4/1-4.7':
    KERNELS=="1-4.7"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="15"
    ATTRS{idVendor}=="0403"
    ATTRS{idProduct}=="6001"
    ATTRS{bcdDevice}=="0400"
    ATTRS{bDeviceClass}=="00"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{speed}=="12"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="8"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Argolis BV"
    ATTRS{product}=="Smartreader plus"
    ATTRS{serial}=="12345678"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1/1-4':
    KERNELS=="1-4"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="100mA"
    ATTRS{urbnum}=="117"
    ATTRS{idVendor}=="1a40"
    ATTRS{idProduct}=="0201"
    ATTRS{bcdDevice}=="0100"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="02"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="3"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="7"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{product}=="USB 2.0 Hub [MTT]"

  looking at parent device '/devices/pci0000:00/0000:00:02.1/usb1':
    KERNELS=="usb1"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{configuration}==""
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bmAttributes}=="e0"
    ATTRS{bMaxPower}=="  0mA"
    ATTRS{urbnum}=="49"
    ATTRS{idVendor}=="1d6b"
    ATTRS{idProduct}=="0002"
    ATTRS{bcdDevice}=="0206"
    ATTRS{bDeviceClass}=="09"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{bMaxPacketSize0}=="64"
    ATTRS{speed}=="480"
    ATTRS{busnum}=="1"
    ATTRS{devnum}=="1"
    ATTRS{version}==" 2.00"
    ATTRS{maxchild}=="10"
    ATTRS{quirks}=="0x0"
    ATTRS{authorized}=="1"
    ATTRS{manufacturer}=="Linux 2.6.32-5-686 ehci_hcd"
    ATTRS{product}=="EHCI Host Controller"
    ATTRS{serial}=="0000:00:02.1"
    ATTRS{authorized_default}=="1"

  looking at parent device '/devices/pci0000:00/0000:00:02.1':
    KERNELS=="0000:00:02.1"
    SUBSYSTEMS=="pci"
    DRIVERS=="ehci_hcd"
    ATTRS{vendor}=="0x10de"
    ATTRS{device}=="0x03f2"
    ATTRS{subsystem_vendor}=="0x1849"
    ATTRS{subsystem_device}=="0x03f2"
    ATTRS{class}=="0x0c0320"
    ATTRS{irq}=="22"
    ATTRS{local_cpus}=="ffffffff"
    ATTRS{local_cpulist}=="0-31"
    ATTRS{modalias}=="pci:v000010DEd000003F2sv00001849sd000003F2bc0Csc03i20"
    ATTRS{enable}=="1"
    ATTRS{broken_parity_status}=="0"
    ATTRS{msi_bus}==""
    ATTRS{companion}==""

  looking at parent device '/devices/pci0000:00':
    KERNELS=="pci0000:00"
    SUBSYSTEMS==""
    DRIVERS==""
 
Zuletzt bearbeitet von einem Moderator:
AW: Thread di diskussione su How-To Udev

Ok, fin qui tutto ok.

Ora posta la tua 10-usbadapter.rules

Usi debian oppure Ubuntu?
 
AW: Thread di diskussione su How-To Udev

Beh allora? ho fatto bene rigaurdo il file rules? cosa posso fare adesso?
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

R
  • Gesperrt
Problem nachvollziehen Download link im forum
Antworten
5
Aufrufe
174
Alex
Support Audi A4 B9 2017 Kessy(retrofit) help
Antworten
9
Aufrufe
415
viper42x
Bin auf euren Thread gestoßen. Habe das File in /usr/bin/oscam_bin 755 geschoben und kriege ssl fehler
2
Antworten
18
Aufrufe
436
Token
T
S
How to compile a new HPClip
Antworten
14
Aufrufe
756
sestarus
S
Support Download MediaHuman YouTube To MP3 Converter v3 über Keeplinks
Antworten
1
Aufrufe
194
Fisher
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…