Stimmt die einstellung

[pehedima]

AW: Stimmt die einstellung

Wenn du nur einen Reader angeschossen hast, dann sollte das device = /dev/ttyUSB0 sein.


Gesendet von meiner Handquetsche

 

[fabsch]

AW: Stimmt die einstellung

Habe jetzt alles probiert aber leider ohne erfolg.

Spoiler

Spoiler

2015/01/30 05:15:07 9664030 h skyv14 [mouse] Restarting reader
2015/01/30 05:15:07 9664030 h skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/01/30 05:15:07 9679AA8 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)

das bekomme ich nach neustadt vom reader.habe gestern eine freischaltung gemacht aber keine emm bekommen,sonder nur das.

Spoiler

2015/01/29 21:08:39 967D238 r skyv14 [mouse] card detected2015/01/29 20:32:50 967D238 r skyv14 [mouse] card detected
2015/01/29 20:32:51 967D238 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/29 20:32:51 967D238 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/29 20:32:51 967D238 r skyv14 [mouse] Setting baudrate to 38400 bps
2015/01/29 20:32:51 967D238 r skyv14 [mouse] Calculated work ETU is 26.05 us
2015/01/29 20:32:51 967D238 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/01/29 20:32:52 967D238 r skyv14 [mouse] Card type: P1TV
2015/01/29 20:32:52 967D238 r skyv14 [mouse] Rom version: 20AA
2015/01/29 20:32:53 967D238 r skyv14 [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2015/01/29 20:32:53 967D238 r skyv14 [mouse] found card system videoguard2
2015/01/29 20:32:53 967D238 r skyv14 [videoguard2] card detected
2015/01/29 20:32:53 967D238 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)
2015/01/29 20:32:53 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 20:32:53 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 20:32:53 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 20:32:53 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 20:32:53 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 20:32:54 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 20:32:54 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 20:32:54 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 20:32:54 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 20:32:54 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 20:32:54 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 20:32:54 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 20:32:55 967D238 r skyv14 [mouse] card initializing error

2015/01/29 21:08:39 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:39 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:39 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:39 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:39 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:39 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:39 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:39 967D238 r skyv14 [mouse] Error activating card.


2015/01/29 21:08:40 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:40 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:40 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:40 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:40 967D238 r skyv14 [mouse] card initializing error
2015/01/29 21:08:42 967D238 r skyv14 [mouse] card detected
2015/01/29 21:08:42 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:42 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:42 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:42 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:42 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:42 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:42 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:42 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:43 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:43 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:43 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:43 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:43 967D238 r skyv14 [mouse] card initializing error
2015/01/29 21:08:52 967D238 r skyv14 [mouse] card detected
2015/01/29 21:08:52 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:52 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:52 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:52 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:52 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:52 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:52 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:52 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:53 967D238 r skyv14 [mouse] Doing fast reset
2015/01/29 21:08:53 967D238 r skyv14 [mouse] ATR: F8 00
2015/01/29 21:08:53 967D238 r skyv14 [mouse] ERROR: Could not read reader->convention
2015/01/29 21:08:53 967D238 r skyv14 [mouse] Error activating card.
2015/01/29 21:08:53 967D238 r skyv14 [mouse] card initializing error

 

[bombadil]

AW: Stimmt die einstellung

Moin,

warum bringst du eine Freischaltung ans Laufen, wenn deine Karte noch nicht mal erkannt wird. Dann brauchst du dich nicht zu wundern, wenn SKY irgendwann keine mehr senden. Wie hast du die Einstellung bei der Maus? USB0 scheint jetzt schon mal richtig zu sein

Grüße
Bombadil

 

[pehedima]

AW: Stimmt die einstellung

Setze mal den folgenden Parameter im Reader der V14:

ins7e11 = 13

oscam neu starten, oscam.log posten.

 

[fabsch]

AW: Stimmt die einstellung

sorry Bombadil ,pehedima

werde die einstellung heute nachmittag gleich probieren und den log posten.

 

[fabsch]

AW: Stimmt die einstellung

Hallo das ist der Log
Hoffe es ist jetzt in Ordnung

Spoiler

2015/01/30 14:24:25 9679AA8 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/01/30 14:24:25 9679AA8 r skyv14 [mouse] card detected
2015/01/30 14:24:25 9679AA8 r skyv14 [mouse] Doing fast reset
2015/01/30 14:24:26 9679AA8 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/30 14:24:26 9679AA8 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/30 14:24:26 9679AA8 r skyv14 [mouse] Setting baudrate to 38400 bps
2015/01/30 14:24:26 9679AA8 r skyv14 [mouse] Calculated work ETU is 26.05 us
2015/01/30 14:24:26 9679AA8 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] Card type: P1TV
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] Rom version: 20AA
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] parental lock setting: FF FF FF FF
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] parental lock disabled
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] parental lock setting after disabling: FF FF FF FF
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] ready for requests
2015/01/30 14:24:28 9679AA8 r skyv14 [mouse] found card system videoguard2
2015/01/30 14:24:28 9679AA8 r skyv14 [videoguard2] card detected
2015/01/30 14:24:28 9679AA8 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)

 

[pehedima]

AW: Stimmt die einstellung

Sieht soweit gut aus.

Aus welcher Kiste läuft das ganze?


Poste doch mal bitte deine kompletten Configs (oscam.conf, oscam.user, oscam.server und oscam.dvbapi)

 

[fabsch]

AW: Stimmt die einstellung

Hier ist die oscam config

Spoiler

[global]
serverip = 192.xxxxxxxx
logfile = /var/log/ipc/OScam.log
cachedelay = 100
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 2480
preferlocalcards = 1
dropdups = 1
emmlogdir = /var/log/ipc
lb_save = 500
lb_reopen_mode = 1
lb_savepath = /var/log/loadb.log
resolvegethostbyname = 1
failbantime = 15
failbancount = 5

[newcamd]
port = xxxxx@1702:000000;xxxxx@1833:000000;xxxxx@0D05:000004,000000,000008,000010
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = xxxxx
nodeid = 5A9BDCE31044153C
version = 2.2.1
reshare = 1

[webif]
httpport = xxxxx
httpuser = oscam
httppwd = oscam
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

hier user

Spoiler

[account]
user = heimo2
pwd = xxxx
caid = 1702,1833,0648,1830
uniq = 3
au = local_sky1702,hd+
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

Igel thin client,in der oscam dvbapi ist nichts drin

 

[pehedima]

AW: Stimmt die einstellung

Die CAIDs 1702 und 1833 sind nur für die S02. Für die v14 benötigst du die CAID 098C.

In der oscam.conf in der newcamd Sektion ersetzen. Beim User alle CAIDs löschen.

Über welchen Client soll die Freischaltung laufen?


Gesendet von meiner Handquetsche

 

[fabsch]

AW: Stimmt die einstellung

Hallo pehedima

Hoffe die user stimmen jetzt.die freischaltung soll über heimo2 laufen.

Habe die 098c eingefügt

Spoiler

[global]
serverip = 192.xxxxxxxxxx
logfile = /var/log/ipc/OScam.log
cachedelay = 100
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 2480
preferlocalcards = 1
dropdups = 1
emmlogdir = /var/log/ipc
lb_save = 500
lb_reopen_mode = 1
lb_savepath = /var/log/loadb.log
resolvegethostbyname = 1
failbantime = 15
failbancount = 5

[newcamd]
port = xxxxx@098C:000000;xxxxx@1833:000000;xxxxx@0D05:000004,000000,000008,000010
key = 0102030405060708091011121314
keepalive = 1

[cccam]
port = xxxxx
nodeid = 5A9BDCE31044153C
version = 2.2.1
reshare = 1

[webif]
httpport = xxxxx
httpuser = oscam
httppwd = xxxxx
httphelplang = de
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
appendchaninfo = 1

hier noch der oscam.server

Spoiler

oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8111
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = hd+
protocol = mouse
device = /dev/ttyUSB1
services = hd+
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
ecmwhitelist = 1830:92
detect = cd
mhz = 600
cardmhz = 357
group = 2
emmcache = 1,3,2
blockemm-unknown = 1

[reader]
label = camd3emu
enable = 0
protocol = camd35
device = 127.0.0.1,20248
user = meinserver
password = xxxxxxxx
services = orf
caid = 0D05
group = 2

[reader]
label = local_sky1702
enable = 0
protocol = mouse
device = /dev/ttyUSB3
services = skyall
caid = 1702,1833
boxkey = xxxxxx
detect = cd
mhz = 600
cardmhz = 600
group = 3
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
saveemm-unknown = 1

[reader]
label = kirseb
protocol = cccam
device = xxxxxxxx
user = fabsch
password =
caid = 1830,1702,1833
group = 3
cccversion = 2.2.1
cccmaxhops = 1
cccmindown = 1
ccckeepalive = 1
cccreshare = 1

[reader]
label = local_orf
protocol = mouse
device = /dev/ttyUSB2
services = orf
fallback = 1
caid = 0D95,0D05,0D98
boxid = 12345678
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE6708AAF97C985CBA8A6C13826963BD3092EB9FC72F773A430724706AA5E1D14E1747842D32069A12D
force_irdeto = 1
boxkey = xxxxxxxxxxxxxxx
detect = cd
mhz = 600
cardmhz = 368
group = 5
emmcache = 1,3,2
blockemm-unknown = 1
lb_weight = 500

[reader]
label = skyv14
protocol = mouse
device = /dev/ttyUSB0
services = skyall
caid = 098C
boxid = 12345678
ins7e11 = 13
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

hoffe jetzt passt alles,das ich mir eine freischaltung schicken lassen kann.

 

[fabsch]

AW: Stimmt die einstellung

die user dazu

Spoiler

[account]
user = andreas
pwd =
caid = 098C
uniq = 3
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = heimo1
pwd =
caid = 098C
uniq = 3
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = kaisy
pwd =
caid = 098C
uniq = 3
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = audrey
pwd =
caid = 098C
uniq = 3
au =
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = frank
pwd =
caid = 098C
uniq = 3
allowedprotocols = newcamd
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = kirseb
pwd =
caid = 098C
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1
cccreshare = 1

[account]
user = anita
pwd =
caid = 098C
uniq = 3
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = andy
pwd =
caid = 098C
uniq = 3
au = 1
group = 1,2,3,4
services = skyall,orf,hd+
cccmaxhops = 1

[account]
user = heimo2
pwd = xxxx
caid = 098C,1830
uniq = 3
au = local_skyv14,hd+
group = 1,2,3,4
services = skyall
cccmaxhops = 1

 

[pehedima]

AW: Stimmt die einstellung

Wenn du bei allen Usern nur die CAID 098C einträgst, dann kann auch nur die entschlüsselt werden.
Daher mein Vorschlag, erstmal den Parameter CAID bei den Usern zu entfernen.

Beim user heimo2 noch das AU ändern:

au                            = [B]skyv14[/B],hd+

Die newcamd Sektion in der oscam.conf benötigt keinen Port für die CAID 1833.

Bei der Frage nach dem Client, hatte ich weniger den User gemeint, sondern eher die Hardware (welcher Receiver?, welche SoftCam läuft dort?)

Lass doch mal ein Logfile vom oscam start an inkl. des Client-Zugriffs sehen.

Wenn das passt kannst du erstmal auf Sky Krimi stellen und schauen ob überhaupt EMM-Logfiles angelegt werden.
Dann kannst du noch immer ein Freischaltesignal anfordern

 

[fabsch]

Erstmals danke pehedima

Hardware ist ein xtrend 4000 mit openatv.

Das ist der log nach neustart

Spoiler

OSCam << cardserver started at Sat Jan 31 09:33:53 2015
-------------------------------------------------------------------------------
2015/01/31 09:33:53 0 s starting thread log_list_thread
2015/01/31 09:33:53 0 s log_list_thread thread started
2015/01/31 09:33:53 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #8111 (i486-linux-gnu)
2015/01/31 09:33:53 0 s version=1.20-unstable_svn, build #8111, system=i486-linux-gnu, nice=-1
2015/01/31 09:33:53 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
2015/01/31 09:33:53 0 s max. logsize=2480 Kb, loghistorysize=4096 bytes
2015/01/31 09:33:53 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=100 ms
2015/01/31 09:33:53 0 s services reloaded: 0 services freed, 6 services loaded, rejected 0
2015/01/31 09:33:53 0 s userdb reloaded: 9 accounts loaded, 0 expired, 0 disabled
2015/01/31 09:33:53 0 s signal handling initialized (type=sysv)
2015/01/31 09:33:53 0 s 1507 service-id's loaded in 10ms
2015/01/31 09:33:53 0 s 21 tier-id's loaded
2015/01/31 09:33:53 0 s 960 provid's loaded
2015/01/31 09:33:53 0 s ERROR: Cannot open file "/var/etc/oscam.guess" (errno=2 No such file or directory)
2015/01/31 09:33:53 0 s ERROR: Cannot open file "/var/etc/oscam.ird" (errno=2 No such file or directory)
2015/01/31 09:33:53 0 s 482 entries read from oscam.whitelist
2015/01/31 09:33:53 0 s ERROR: Cannot open file "/var/etc/oscam.cacheex" (errno=2 No such file or directory)
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s monitor: disabled
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s camd35: disabled
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s cs378x: disabled
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s newcamd: initialized (fd=5, port=, ip=192., prio=1, crypted)
2015/01/31 09:33:53 0 s -> CAID: 098C PROVID: 000000
2015/01/31 09:33:53 0 s Starting listener 1
2015/01/31 09:33:53 0 s newcamd: initialized (fd=6, port=, ip=192., prio=1, crypted)
2015/01/31 09:33:53 0 s -> CAID: 1833 PROVID: 000000
2015/01/31 09:33:53 0 s Starting listener 2
2015/01/31 09:33:53 0 s newcamd: initialized (fd=7, port=, ip=192., prio=1, crypted)
2015/01/31 09:33:53 0 s -> CAID: 0D05 PROVID: 000004, 000000, 000008, 000010
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s cccam: initialized (fd=8, port=xxxxx, ip=192.xxxxxxxx, prio=1, crypted)
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s pandora: disabled
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s csp: disabled
2015/01/31 09:33:53 0 s Starting listener 0
2015/01/31 09:33:53 0 s radegast: disabled
2015/01/31 09:33:53 0 s starting thread http
2015/01/31 09:33:53 0 s http thread started
2015/01/31 09:33:53 0 s starting thread reader check
2015/01/31 09:33:53 0 s reader check thread started
2015/01/31 09:33:53 0 s starting thread check
2015/01/31 09:33:53 0 s check thread started
2015/01/31 09:33:53 0 s hd+ [mouse] creating thread for device /dev/ttyUSB1
2015/01/31 09:33:53 0 s kirseb [cccam] creating thread for device greatstuff.servebeer.com
2015/01/31 09:33:53 0 s local_orf [mouse] creating thread for device /dev/ttyUSB2
2015/01/31 09:33:53 0 s skyv14 [mouse] creating thread for device /dev/ttyUSB0
2015/01/31 09:33:53 0 s waiting for local card init
2015/01/31 09:33:53 965F688 h HTTP Server listening on port
2015/01/31 09:33:53 965AA90 p greatstuff.servebeer.com: resolved ip=
2015/01/31 09:33:53 965AA90 p kirseb [cccam] connecting to greatstuff.servebeer.com:63211
2015/01/31 09:33:53 965AA90 p init error from reader kirseb
2015/01/31 09:33:53 965AA90 p kirseb [cccam] proxy initialized, server greatstuff.servebeer.com:63211
2015/01/31 09:33:53 965DD38 r skyv14 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2015/01/31 09:33:53 965C3E8 r local_orf [mouse] Reader initialized (device=/dev/ttyUSB2, detect=cd, mhz=600, cardmhz=368)
2015/01/31 09:33:54 96591A8 r hd+ [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=357)
2015/01/31 09:33:54 965C3E8 r local_orf [mouse] card detected
2015/01/31 09:33:54 965DD38 r skyv14 [mouse] card detected
2015/01/31 09:33:54 96591A8 r hd+ [mouse] card detected
2015/01/31 09:33:55 965DD38 r skyv14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/01/31 09:33:55 965DD38 r skyv14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/01/31 09:33:55 965DD38 r skyv14 [mouse] Setting baudrate to 38400 bps
2015/01/31 09:33:55 965DD38 r skyv14 [mouse] Calculated work ETU is 26.05 us
2015/01/31 09:33:56 965DD38 r skyv14 [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2015/01/31 09:33:56 96591A8 r hd+ [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2015/01/31 09:33:56 96591A8 r hd+ [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2015/01/31 09:33:56 96591A8 r hd+ [mouse] Setting baudrate to 111600 bps
2015/01/31 09:33:56 96591A8 r hd+ [mouse] Calculated work ETU is 5.33 us
2015/01/31 09:33:56 96591A8 r hd+ [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 6.00 Mhz (specified in reader->mhz)
2015/01/31 09:33:56 96591A8 r hd+ [mouse] Card responded ok for ifsd request of 251
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] Card type: P1TV
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] Rom version: 20AA
2015/01/31 09:33:57 96591A8 r hd+ [mouse] detect native nagra card
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] parental lock setting: FF FF FF FF
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] parental lock disabled
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] parental lock setting after disabling: FF FF FF FF
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] type: VideoGuard Sky Germany (098C), caid: 098C
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] serial: ########, BoxID: ########, baseyear: 2004
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] ready for requests
2015/01/31 09:33:57 965DD38 r skyv14 [mouse] found card system videoguard2
2015/01/31 09:33:57 965DD38 r skyv14 [videoguard2] card detected
2015/01/31 09:33:57 965DD38 r skyv14 [videoguard2] type: VideoGuard Sky Germany (098C)
2015/01/31 09:33:57 96591A8 r hd+ [mouse] found card system nagra
2015/01/31 09:33:57 96591A8 r hd+ [nagra] ROM: D N A S P 1 4 2
2015/01/31 09:33:57 96591A8 r hd+ [nagra] REV: R e v G C 6
2015/01/31 09:33:57 96591A8 r hd+ [nagra] SER: ############
2015/01/31 09:33:57 96591A8 r hd+ [nagra] CAID: 1830
2015/01/31 09:33:57 96591A8 r hd+ [nagra] Prv.ID: 00 00 34 11 (sysid)
2015/01/31 09:33:57 96591A8 r hd+ [nagra] Prv.ID: 00 00 00 00
2015/01/31 09:33:58 96591A8 r hd+ [nagra] IRD ID: ############
2015/01/31 09:33:58 96591A8 r hd+ [nagra] active to: 2015/02/27 11:59
2015/01/31 09:33:58 96591A8 r hd+ [nagra] -----------------------------------------
2015/01/31 09:33:58 96591A8 r hd+ [nagra] |id |tier |valid from |valid to |
2015/01/31 09:33:58 96591A8 r hd+ [nagra] +----+--------+------------+------------+
2015/01/31 09:33:58 96591A8 r hd+ [nagra] |8011|0064 |2013/03/14 |2014/03/15 |
2015/01/31 09:33:58 96591A8 r hd+ [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2015/01/31 09:33:58 96591A8 r hd+ [nagra] |8011|0BEA |2014/05/17 |2015/06/22 |
2015/01/31 09:33:58 96591A8 r hd+ [nagra] -----------------------------------------
2015/01/31 09:33:58 96591A8 r hd+ [nagra] ready for requests
2015/01/31 09:33:58 965C3E8 r local_orf [mouse] Error activating card.
2015/01/31 09:34:06 0 --- Skipped 2 duplicated log lines ---
2015/01/31 09:34:06 965C3E8 r local_orf [mouse] card initializing error
2015/01/31 09:34:07 0 s init for all local cards done
2015/01/31 09:34:07 0 s anti cascading disabled
2015/01/31 09:34:07 9675E50 c anonymous disconnected from 217.85.145.79

 

[pehedima]

AW: Stimmt die einstellung

Deine oscam Version ist zu alt, bitte updaten.

Sehe keinen Zugriff vom Client?
Bitte einschalten und einen verschlüsselten Sender einstellen.

Neues logfile vom oscam start und Clientzugriff posten.

 

[fabsch]

Bleiben die Einstellungen erhalten oder muss ich dann wieder alles neu machen?
Wie kann ich das einschalten das denn Zugriff des liegt sehe?

weis nicht ob das was hilft.

Spoiler

015/01/31 13:24:58 982A9E0 c encrypted cccam-client ##### granted (kaisy, au=off)