solo2 usb dvb-t tuner problem

Hello ,. I have a lonrisum Solo2. I never did the FPGA update. HOWEVER Recently I did the V4 upgrade (I think I did, I mean I used a standard null modelm cable and the screen after a few minutes Showed'Finished') I do not have the cable did came with The Solo2 So now with most V4 images I do not get the Freeview nimsocket With OpenPLi I get: cat / proc / bus / nim_sockets NIM Socket 0: Type: DVB-S2 Name: BCM7356 DVB-S2 NIM (internal) Frontend_Device: 0 NIM Socket 1: Type: DVB-S2 Name: BCM7356 DVB-S2 NIM (internal) Frontend_Device: 1 NIM Socket 2: Type: DVB-T Name: ITE 9135 Generic_1 This is after doing: opkg --risky install firmware dvb Fe af9013 opkg --risky install firmware DVB USB af9015 opkg --risky install firmware DVB USB af9035-02 opkg --risky install kernel-module-dvb-usb opkg --risky install kernel modules -DVB USB v2 opkg --risky install kernel-module-dvb-usb it913x opkg --risky install kernel-module-it913x-fe opkg --risky install firmware DVB USB it913x opkg --risky install enigma2 plugin-drivers-DVB USB it913x modprobe dvb_usb_it913x cat / proc / bus / nim_sockets The problem is indeed As Soon As I zap to a DVB-T channel enigma gets unrespsonsive, so I can keep watching channel did but the Solo2 No Longer Responds to remove Control Commands (or webif). Telnet remains responsive. Can somebody show some light?

AW: solo2 usb dvb-t tuner problem

For the V4 update you have to use the cable, which came along with the clone. No null modem cable will work.

AW: solo2 usb dvb-t tuner problem

ok, then how can I tell what V do I have (V1, V2 ...)