Hallo!
Ich weiss nun echt nicht mehr weiter:emoticon-0108-speec
Ich versuche (nach wie vor erfolglos) ORF und Konsorten zum Laufen zu bringen.
Erst mal mein Setup:
Die Configs (Bitte um Nachsicht, was gewisse Einträge angeht...ich hab von den meisten Dingen hier echt null Ahnung und experimentiere hier schon ne ganze Weile herum...):
.conf:
.user:
.server:
.dvbapi:
.services:
Hier nun die Log-Einträge beim Start (sieht meiner Meinung nach sauber aus):
So, und nun zum eigentlichen Problem: sobald ich auf einen österreichischen Sender (in dem Fall ORF2) wechseln will, passiert das:
Ich wäre echt dankbar, wenn mir jemand helfen könnte, diese Sender endlich hell zu bekommen...
Ich weiss nun echt nicht mehr weiter:emoticon-0108-speec
Ich versuche (nach wie vor erfolglos) ORF und Konsorten zum Laufen zu bringen.
Erst mal mein Setup:
- Linux LOSH-HTPC 3.14.8 #1 SMP Wed Jun 25 14:36:42 CEST 2014 x86_64 GNU/Lieux
- OpenELEC (official) - Version: 4.0.6
- vdr (2.1.6/2.1.6) - The Video Disk Recorder
- oscam-1.20-unstable_svn-r9730
- smartreader2+ version v1.1
- MODE autoswitch
- FREQ 6,00 Mhz
- T_MODE t = 1
- EGT 0
- NAME smargo01
- Orf Digital-Sat-Karte (C84...) mit gültigem Abo
Die Configs (Bitte um Nachsicht, was gewisse Einträge angeht...ich hab von den meisten Dingen hier echt null Ahnung und experimentiere hier schon ne ganze Weile herum...):
.conf:
[global]
logfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
preferlocalcards = 1
usrfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/cw
maxlogsize = 1024
[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = pc
[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 5
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15
logfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscam.log
nice = -1
preferlocalcards = 1
usrfile = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/oscamuser.log
cwlogdir = /storage/.xbmc/userdata/addon_data/service.softcam.oscam/log/cw
maxlogsize = 1024
[dvbapi]
enabled = 1
au = 1
user = dvbapi
boxtype = pc
[webif]
httpport = 8888
httpuser = oscam
httppwd = oscam
httprefresh = 5
httpallowed = 0.0.0.0-255.255.255.255
aulow = 120
hideclient_to = 15
[account]
user = dvbapi
au = 1
emmreassembly = 1
group = 1
user = dvbapi
au = 1
emmreassembly = 1
group = 1
[reader]
label = orf
protocol = smartreader
device = SRv2;Serial:smargo01
services = orfcw,orfice,skyorf
autospeed = 0
caid = 0648
boxkey = 11...88
rsakey = DF...2D
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
ident = 0648:000000
group = 1
emmcache = 1,1,2
label = orf
protocol = smartreader
device = SRv2;Serial:smargo01
services = orfcw,orfice,skyorf
autospeed = 0
caid = 0648
boxkey = 11...88
rsakey = DF...2D
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
ident = 0648:000000
group = 1
emmcache = 1,1,2
P:0D05
P:1830
P:1702
P:1833
I:0
P:1830
P:1702
P:1833
I:0
[orfcw]
caid = 0D05,0D95
provid = 000000,000004
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC
[orfice]
caid = 0648
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC
[skyorf]
caid = 1702,1833,09C4,098C
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D
caid = 0D05,0D95
provid = 000000,000004
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC
[orfice]
caid = 0648
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D,33AC
[skyorf]
caid = 1702,1833,09C4,098C
provid = 000000
srvid = 132F,1330,32C9,32CA,32CB,32CC,32CD,32CE,32CF,32D0,32D1,32D2,32D3,32D4,4E27,33A7,33A5,332D
Hier nun die Log-Einträge beim Start (sieht meiner Meinung nach sauber aus):
- 2014/06/29 22:34:07 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9730 (x86_64-openelec-linux-gnu)
- 2014/06/29 22:34:07 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3505
- 2014/06/29 22:34:07 0 s services reloaded: 0 services freed, 3 services loaded, rejected 0
- 2014/06/29 22:34:07 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
- 2014/06/29 22:34:07 0 s signal handling initialized
- 2014/06/29 22:34:07 0 s 25 service-id's loaded in 0ms
- 2014/06/29 22:34:07 0 s 38 tier-id's loaded
- 2014/06/29 22:34:07 0 s 841 provid's loaded
- 2014/06/29 22:34:07 0 s orf [smartreader] creating thread for device SRv2;Serial:smargo01
- 2014/06/29 22:34:07 0 s loadbalancer: can't read from file /tmp/.oscam/stat
- 2014/06/29 22:34:07 0 s waiting for local card init
- 2014/06/29 22:34:07 FE85E0 r orf [smartreader] De SR_init
- 2014/06/29 22:34:07 FE85E0 r orf [smartreader] initing smargo type SRv2
- 2014/06/29 22:34:07 FE85E0 r orf [smartreader] Using 0x02/0x81 as endpoint for smartreader hardware detection
- 2014/06/29 22:34:07 CC0008C0 h webif: decompressed 150633 bytes back into 358016 bytes
- 2014/06/29 22:34:07 CC0008C0 h HTTP Server running. ip=0.0.0.0 port=8888
- 2014/06/29 22:34:07 FE85E0 r Found reader with serial smargo01 at 003:011
- 2014/06/29 22:34:07 FE85E0 r Found smartreader device Serial:smargo01
- 2014/06/29 22:34:07 FE85E0 r orf [smartreader] Creating smartreader thread.
- 2014/06/29 22:34:07 FE85E0 r orf [smartreader] clocking for smartreader with smartreader protocol
- 2014/06/29 22:34:07 FE85E0 r orf [smartreader] Reader initialized (device=SRv2;Serial:smargo01, detect=cd, mhz=600, cardmhz=600)
- 2014/06/29 22:34:09 0 s init for all local cards done
- 2014/06/29 22:34:09 0 s anti cascading disabled
- 2014/06/29 22:34:09 1003B90 c plain dvbapi-client granted (dvbapi, au=auto (1 reader))
- 2014/06/29 22:34:09 1003B90 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 11
So, und nun zum eigentlichen Problem: sobald ich auf einen österreichischen Sender (in dem Fall ORF2) wechseln will, passiert das:
- 2014/06/29 22:38:48 1003B90 c [ADD PID 0] CAID: 0D95 ECM_PID: 00FC PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 1] CAID: 0D05 ECM_PID: 00CA PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 2] CAID: 0648 ECM_PID: 0066 PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 3] CAID: 1702 ECM_PID: 012E PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 4] CAID: 1833 ECM_PID: 0192 PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E2 PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 6] CAID: 098C ECM_PID: 01EC PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 7] CAID: 0D98 ECM_PID: 00FE PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c [ADD PID 8] CAID: 0650 ECM_PID: 0068 PROVID: 000000
- 2014/06/29 22:38:48 1003B90 c Found 9 ECMpids and 3 STREAMpids in PMT
- 2014/06/29 22:38:48 1003B90 c [DVBAPI] Receiver wants to demux srvid 32CA on adapter 0000 camask 0001 index 0000 pmtpid 0000
- 2014/06/29 22:38:48 1003B90 c New program number: 32CA (0D95:32CA unknown) [pmt_list_management 3]
- 2014/06/29 22:38:48 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:48 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:48 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:49 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:49 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:49 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:50 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:50 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:50 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:50 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:50 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:51 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:51 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:51 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:52 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:52 1003B90 c [ADD PID 0] CAID: 0D95 ECM_PID: 00FC PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 1] CAID: 0D05 ECM_PID: 00CA PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 2] CAID: 0648 ECM_PID: 0066 PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 3] CAID: 1702 ECM_PID: 012E PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 4] CAID: 1833 ECM_PID: 0192 PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 5] CAID: 09C4 ECM_PID: 01E2 PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 6] CAID: 098C ECM_PID: 01EC PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 7] CAID: 0D98 ECM_PID: 00FE PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c [ADD PID 8] CAID: 0650 ECM_PID: 0068 PROVID: 000000
- 2014/06/29 22:38:52 1003B90 c Found 9 ECMpids and 3 STREAMpids in PMT
- 2014/06/29 22:38:52 1003B90 c [DVBAPI] Receiver wants to demux srvid 32CA on adapter 0000 camask 0001 index 0000 pmtpid 0000
- 2014/06/29 22:38:52 1003B90 c New program number: 32CA (0D95:32CA unknown) [pmt_list_management 3]
- 2014/06/29 22:38:52 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:52 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:52 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:53 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:53 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:53 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:53 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:54 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:54 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:54 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:55 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
- 2014/06/29 22:38:55 1003B90 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 9 ecmpids!
- 2014/06/29 22:38:55 1003B90 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
Ich wäre echt dankbar, wenn mir jemand helfen könnte, diese Sender endlich hell zu bekommen...
Zuletzt bearbeitet: