Simplebuild 3 (310 Final) de en bg es fr it nl pl pt tr language support

martin8310 · 9. Oktober 2020

dann ist das Docker falsch !? FROM debian:jessie

gorgone · 9. Oktober 2020

hast du den toolchain gecheckt ? ?

Kind regards · 9. Oktober 2020

martin8310 schrieb:
dann ist das Docker falsch !? FROM debian:jessie

uname -a
?

martin8310 · 9. Oktober 2020

Code:

    _________________
   /   _____/\_____  \   ===============
   \_____  \   _(__  <   Ver. 313 -NEXT-
   /        \ /       \  ===============
  /_______  //______  /  by gorgone 2020
          \/        \/   ===============

  Compiler Info -----> arm_dream
  ====================
_toolchain: line 212: ./arm-newnigma2-linux-gnueabihf-gcc: cannot execute binary file: Exec format error
_toolchain: line 213: ./arm-newnigma2-linux-gnueabihf-gcc: cannot execute binary file: Exec format error
  GCC Version :
  GCC Binary  : -gcc
  GCC Sysroot :
  Header File : crypto.h        (not found)
  Header File : pcsclite.h      (not found)
  Header File : libusb.h        (not found)
  Header File : pthread.h       (not found)

  Sysroot config ----> arm-newnigma2-linux-gnueabihf
  ====================
  Header File : crypto.h        found
  Header File : pcsclite.h      found
  Header File : libusb.h        found
  Header File : pthread.h       found

  Library config ----> arm-newnigma2-linux-gnueabihf/sysroot/usr/lib/pkgconfig
  ====================
  Library Config : libcrypto.pc        found    OpenSSL-libcrypto   1.0.2j
  Library Config : libpcsclite.pc      found    PCSC Lite           1.7.4
  Library Config : libssl.pc           found    OpenSSL-libssl      1.0.2j
  Library Config : libusb-1.0.pc       found    libusb-1.0          1.0.20
  Library Config : openssl.pc          found    OpenSSL             1.0.2j

Code:

Linux dfa825a600ec 5.4.51-v7l+ #1333 SMP Mon Aug 10 16:51:40 BST 2020 armv7l GNU/Linux

Kind regards · 9. Oktober 2020

dein linux ist nicht 64bit

martin8310 · 9. Oktober 2020

OK, und das steht wo?

dewildschwein500 · 9. Oktober 2020

hi,
mein docker läuft auf einem nuc mit Ubuntu 18.04.5 LTS. Mit der arm_dream Toolchain läuft der Compiler erfolgreich durch.

hier mal die Infos aus meinem Container zum Vergleich:

Code:

    _________________
   /   _____/\_____  \   ===============
   \_____  \   _(__  <   Ver. 313 -NEXT-
   /        \ /       \  ===============
  /_______  //______  /  by gorgone 2020
          \/        \/   ===============

  Compiler Info -----> arm_dream
  ====================
  GCC Version : 5.2.1
  GCC Binary  : arm-newnigma2-linux-gnueabihf-gcc
  GCC Sysroot : arm-newnigma2-linux-gnueabihf/sysroot
  Header File : crypto.h        found
  Header File : pcsclite.h      found
  Header File : libusb.h        found
  Header File : pthread.h       found

  Sysroot config ----> arm-newnigma2-linux-gnueabihf
  ====================
  Header File : crypto.h        found
  Header File : pcsclite.h      found
  Header File : libusb.h        found
  Header File : pthread.h       found

  Library config ----> arm-newnigma2-linux-gnueabihf/sysroot/usr/lib/pkgconfig
  ====================
  Library Config : libcrypto.pc        found    OpenSSL-libcrypto   1.0.2j
  Library Config : libpcsclite.pc      found    PCSC Lite           1.7.4
  Library Config : libssl.pc           found    OpenSSL-libssl      1.0.2j
  Library Config : libusb-1.0.pc       found    libusb-1.0          1.0.20
  Library Config : openssl.pc          found    OpenSSL             1.0.2j
root@4ddc698a3149:/opt/s3# uname -r
4.15.0-39-generic
root@4ddc698a3149:/opt/s3# uname -a
Linux 4ddc698a3149 4.15.0-39-generic #42-Ubuntu SMP Tue Oct 23 15:48:01 UTC 2018 x86_64 GNU/Linux

Kind regards · 9. Oktober 2020

bei mir steht zum Beispiel:
Linux debian11 5.8.0-2-amd64 #1 SMP Debian 5.8.10-1 (2020-09-19) x86_64 GNU/Linux

am docker liegt es nicht , wenn keine 64bit Maschine vorhanden , dann halt 32 bit

und x86_64 GNU/Linux fehlt .

dewildschwein500 · 9. Oktober 2020

Hi @martin8310,
baust du auf einem Raspberry PI?

p.s. muss jetzt leider erstmal wieder weg ... evtl. teste ich das später mal auf einem PI.

martin8310 · 9. Oktober 2020

Hi, ja. Jetzt werde ich mal ein Debian 10 64bit installieren und hoffen, dass es auf der VM läuft. Ich frage mich langsam wirklich, warum ich diese Simplebuild zum laufen bekommen will ;-)

Danke euch !!

Code:

  Selected installer:    debian_os
  select dialog          from: dialog
  select gawk            from: gawk
  select bzip2           from: bzip2
  select svn             from: subversion
  select xz              from: xz-utils
  select upx             from: upx
  select gcc             from: gcc
  select make            from: make
  select sshpass         from: sshpass
  select dos2unix        from: dos2unix
find: `/usr/include/*': No such file or directory
  select crypto.h        from: libssl-dev
find: `/usr/include/*': No such file or directory
  select libusb.h        from: libusb-1.0.0-dev
find: `/usr/include/*': No such file or directory
  select pcsclite.h      from: libpcsclite-dev
find: `/usr/include/*': No such file or directory
  select pthread.h       from: libc-dev-bin
  select libccidtwin.so  from: libccid
  select zlib32          from: lib32z1

Code:

CLEANUP -> Creating new config file. Please wait...
error: test is not defined
[.[] | select(.name|test("openssl-3.0.0\\S.*"))][0] | .name                    1 compile error
error: test is not defined
[.[] | select(.name|test("openssl-3.0.0\\S.*"))][0] | .tarball_url                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_1_1[a-z].*"))][0] | .name                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_1_1[a-z].*"))][0] | .tarball_url                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_1_0[a-z].*"))][0] | .name                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_1_0[a-z].*"))][0] | .tarball_url                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_0_2[a-z].*"))][0] | .name                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_0_2[a-z].*"))][0] | .tarball_url                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_0_0[a-z].*"))][0] | .name                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_1_0_0[a-z].*"))][0] | .tarball_url                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_0_9_8[a-z].*"))][0] | .name                    1 compile error
error: test is not defined
[.[] | select(.name|test("OpenSSL_0_9_8[a-z].*"))][0] | .tarball_url                    1 compile error
config file='/opt/s3/support/configs/plugin_update_toolchain.config'
You can change/extend them to fit your needs.


DONE -> Variable changed to: CTNG_BUILD_AS_ROOT="1";

TERM environment variable not set.

geht ja gut los

Ja guck, scheint die Anleitung "https://www.digital-eliteboard.com/...pl-pt-tr-language-support.469050/post-3825560" doch zu funktionieren.

Mein System: VMWare - Debian10 mit 64bit und der oben genannten Anleitung

rolu2 · 21. Oktober 2020

Moin Männer

Mein System

Code:

Linux s3-debian-10 4.19.0-12-amd64 #1 SMP Debian 4.19.152-1 (2020-10-18) x86_64 GNU/Linux

Beim toolchain

Code:

fos_m72x_mips

Code:

FRITZ!Box 7590 and other GRX models 7.2x (mips mips32r2 32-bit BE, uClibc 1.0.15, gcc 8.3.0, linux 4.9.198)

bekomme ich beim Versuch die Bibliotheken zu installieren kommt die Fehlermeldung (siehe Bild)

Dann klappt natürlich auch nicht mit den Bibliotheken nicht. Beispiel

Code:

Plugin s3.TUP v0.22.1 - Aktualisierung Bibliothek Log - 2020-10-20 20:53:17
================================================================================
Befehlszeilen zum Erstellen von (1/1) fos_m72x_mips: Bibliothek libusb 1.0.23:
================================================================================
cd /tmp/lib_source/2020-10-20.205314/libusb-1.0.23/;
export TOOLCHAIN=/home/user/oscam/s3/support/toolchains/fos_m72x_mips;
export PATH="$TOOLCHAIN/bin:$PATH";
[ -n "" ] && export CFLAGS="";
export CC=/home/user/oscam/s3/support/toolchains/fos_m72x_mips/bin/mips-linux-uclibc-gcc;
[ "freetz-ng" == "android-ndk" ] && export ANDROID_NDK="/home/user/oscam/s3/support/toolchains/fos_m72x_mips";
[ "freetz-ng" == "android-ndk" ] && cp -f "android/config.h" "./config.h";
[ "freetz-ng" == "android-ndk" ] && FLAGS="--enable-static --disable-shared --disable-udev" || FLAGS="--disable-udev";
./configure --prefix=/home/user/oscam/s3/support/toolchains/fos_m72x_mips/bin --host= $FLAGS;
make -j2;
make install;
[ "freetz-ng" == "android-ndk" ] && find "/home/user/oscam/s3/support/toolchains/fos_m72x_mips/bin/lib/" -maxdepth 1 -name "libusb-1.0.*" -execdir ln -frs "/home/user/oscam/s3/support/toolchains/fos_m72x_mips/bin/lib/{}" "/home/user/oscam/s3/support/toolchains/fos_m72x_mips/bin/lib///{}" \;;
================================================================================
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /usr/bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make supports nested variables... yes
checking whether make supports nested variables... (cached) yes
checking for gcc... /home/user/oscam/s3/support/toolchains/fos_m72x_mips/bin/mips-linux-uclibc-gcc
checking whether the C compiler works... no
configure: error: in `/tmp/lib_source/2020-10-20.205314/libusb-1.0.23':
configure: error: C compiler cannot create executables
See `config.log' for more details
make: *** Es wurden keine Ziele angegeben und keine â€žmakeâ€œ-Steuerdatei gefunden.  Schluss.
make: *** Keine Regel, um â€žinstallâ€œ zu erstellen.  Schluss.

Abhängigkeiten sollten Alle drauf sein

Jemand eine Idee????

Edit: Sehe gerade im

Code:

2020-10-20.195116_tup_crosstoolchain_fos_m72x_mips.log

was

Code:

    gen-headers
set -e; : "  COMPAT  include/generated/lisi/linux/avm_net_trace.h"; mkdir -p include/generated/lisi/linux/; awk '$1 == "linux/avm_net_trace.h" { print "#ifdef __KERNEL__"; print "#include <" $2 ">"; if (match($1, "^uapi/")) { sub(/^uapi\//, "", $1); sub(/^uapi\//, "", $2); print "#else"; print "#include <" $2 ">"; }; print "#endif"; }' < drivers/char/avm_net_trace/avm/conf/compat.headers > include/generated/lisi/linux/avm_net_trace.h;
set -e; : "  COMPAT  include/generated/uapi/linux/avm_net_trace_ioctl.h"; mkdir -p include/generated/uapi/linux/; awk '$1 == "uapi/linux/avm_net_trace_ioctl.h" { print "#ifdef __KERNEL__"; print "#include <" $2 ">"; if (match($1, "^uapi/")) { sub(/^uapi\//, "", $1); sub(/^uapi\//, "", $2); print "#else"; print "#include <" $2 ">"; }; print "#endif"; }' < drivers/char/avm_net_trace/avm/conf/compat.headers > include/generated/uapi/linux/avm_net_trace_ioctl.h;
set -e; : '  CHK     include/generated/uapi/linux/version.h'; mkdir -p include/generated/uapi/linux/;     (echo \#define LINUX_VERSION_CODE 264646; echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) < Makefile > include/generated/uapi/linux/version.h.tmp; if [ -r include/generated/uapi/linux/version.h ] && cmp -s include/generated/uapi/linux/version.h include/generated/uapi/linux/version.h.tmp; then rm -f include/generated/uapi/linux/version.h.tmp; else : '  UPD     include/generated/uapi/linux/version.h'; mv -f include/generated/uapi/linux/version.h.tmp include/generated/uapi/linux/version.h; fi
set -e; : "  COMPAT  include/generated/lisi/linux/avm_pa.h"; mkdir -p include/generated/lisi/linux/; awk '$1 == "linux/avm_pa.h" { print "#ifdef __KERNEL__"; print "#include <" $2 ">"; if (match($1, "^uapi/")) { sub(/^uapi\//, "", $1); sub(/^uapi\//, "", $2); print "#else"; print "#include <" $2 ">"; }; print "#endif"; }' < net/avm_pa/avm/conf/compat.headers > include/generated/lisi/linux/avm_pa.h;
set -e; : "  COMPAT  include/generated/lisi/linux/avm_pa_hw.h"; mkdir -p include/generated/lisi/linux/; awk '$1 == "linux/avm_pa_hw.h" { print "#ifdef __KERNEL__"; print "#include <" $2 ">"; if (match($1, "^uapi/")) { sub(/^uapi\//, "", $1); sub(/^uapi\//, "", $2); print "#else"; print "#include <" $2 ">"; }; print "#endif"; }' < net/avm_pa/avm/conf/compat.headers > include/generated/lisi/linux/avm_pa_hw.h;
set -e; : "  COMPAT  include/generated/lisi/linux/avm_pa_ifx_multiplexer.h"; mkdir -p include/generated/lisi/linux/; awk '$1 == "linux/avm_pa_ifx_multiplexer.h" { print "#ifdef __KERNEL__"; print "#include <" $2 ">"; if (match($1, "^uapi/")) { sub(/^uapi\//, "", $1); sub(/^uapi\//, "", $2); print "#else"; print "#include <" $2 ">"; }; print "#endif"; }' < net/avm_pa/avm/conf/compat.headers > include/generated/lisi/linux/avm_pa_ifx_multiplexer.h;
rm -f include/linux/version.h
set -e; : '  CHK     include/generated/utsrelease.h'; mkdir -p include/generated/;     if [ `echo -n "4.9.198" | wc -c ` -gt 64 ]; then echo '"4.9.198" exceeds 64 characters' >&2; exit 1; fi; (echo \#define UTS_RELEASE \"4.9.198\";) < include/config/kernel.release > include/generated/utsrelease.h.tmp; if [ -r include/generated/utsrelease.h ] && cmp -s include/generated/utsrelease.h include/generated/utsrelease.h.tmp; then rm -f include/generated/utsrelease.h.tmp; else : '  UPD     include/generated/utsrelease.h'; mv -f include/generated/utsrelease.h.tmp include/generated/utsrelease.h; fi
make -f ./scripts/Makefile.build obj=arch/mips/boot/tools relocs
mkdir -p .tmp_versions
  gcc -Wp,-MD,arch/mips/boot/tools/.relocs_32.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89     -c -o arch/mips/boot/tools/relocs_32.o arch/mips/boot/tools/relocs_32.c
  gcc -Wp,-MD,arch/mips/boot/tools/.relocs_64.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89     -c -o arch/mips/boot/tools/relocs_64.o arch/mips/boot/tools/relocs_64.c
  gcc -Wp,-MD,arch/mips/boot/tools/.relocs_main.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89     -c -o arch/mips/boot/tools/relocs_main.o arch/mips/boot/tools/relocs_main.c
  gcc  -o arch/mips/boot/tools/relocs arch/mips/boot/tools/relocs_32.o arch/mips/boot/tools/relocs_64.o arch/mips/boot/tools/relocs_main.o
make -f ./scripts/Makefile.build obj=.
mkdir -p kernel/
set -e; : '  CHK     include/generated/timeconst.h'; mkdir -p include/generated/;     (echo 250 | bc -q kernel/time/timeconst.bc ) < kernel/time/timeconst.bc > include/generated/timeconst.h.tmp; if [ -r include/generated/timeconst.h ] && cmp -s include/generated/timeconst.h include/generated/timeconst.h.tmp; then rm -f include/generated/timeconst.h.tmp; else : '  UPD     include/generated/timeconst.h'; mv -f include/generated/timeconst.h.tmp include/generated/timeconst.h; fi
  mips-unknown-linux-gnu-gcc -Wp,-MD,kernel/.bounds.s.d  -nostdinc -isystem /home/user/oscam/s3/support/crosstool/freetz-ng/toolchain/build/mips_gcc-8.3.0/mips-unknown-linux-gnu/lib/gcc/mips-unknown-linux-gnu/8.3.0/include -I./arch/mips/include -I./arch/mips/include/generated/uapi -I./arch/mips/include/generated  -I./include -Idrivers/isdn/capi_oslib/include   -Idrivers/char/avm_new/include   -Idrivers/char/avm_power/include   -Idrivers/char/tffs/include   -Idrivers/char/avm_net_trace/include   -Inet/avm_pa/include  -Iinclude/generated/lisi -I./arch/mips/include/uapi -I./arch/mips/include/generated/uapi -I./include/uapi -I./include/generated/uapi -Idrivers/isdn/capi_oslib/include/uapi   -Idrivers/char/avm_new/include/uapi   -Idrivers/char/avm_power/include/uapi   -Idrivers/char/tffs/include/uapi   -Idrivers/char/avm_net_trace/include/uapi   -Inet/avm_pa/include/uapi   -include ./include/linux/kconfig.h  -D__KERNEL__ -DVMLINUX_LOAD_ADDRESS=0xffffffff80500000 -DDATAOFFSET=0 -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -fshort-wchar -Werror-implicit-function-declaration -Wno-format-security -std=gnu89 -fno-PIE -mno-check-zero-division -mabi=32 -G 0 -mno-abicalls -fno-pic -pipe -mno-branch-likely -msoft-float -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float -ffreestanding -march=interaptiv -mtune=interaptiv -Wa,-march=interaptiv -Wa,-mtune=interaptiv -Wa,--trap -DTOOLCHAIN_SUPPORTS_VIRT -mdsp -I./arch/mips/include/asm/mach-lantiq -I./arch/mips/include/asm/mach-lantiq/grx500 -I./arch/mips/include/asm/mach-generic -fno-delete-null-pointer-checks -Wno-frame-address -Wno-format-truncation -Wno-format-overflow -Wno-int-in-bool-context -Wno-attribute-alias -O2 -fno-reorder-blocks -fno-tree-ch --param=allow-store-data-races=0 -DCC_HAVE_ASM_GOTO -Wframe-larger-than=1024 -fstack-protector -Wno-unused-but-set-variable -Wno-unused-const-variable -fomit-frame-pointer -fno-var-tracking-assignments -g -Wdeclaration-after-statement -Wno-pointer-sign -Wno-stringop-truncation -fno-strict-overflow -fno-merge-all-constants -fmerge-constants -fno-stack-check -fconserve-stack -Werror=implicit-int -Werror=strict-prototypes -Werror=date-time -Werror=incompatible-pointer-types -Wno-packed-not-aligned    -DKBUILD_BASENAME='"bounds"'  -DKBUILD_MODNAME='"bounds"'  -fverbose-asm -S -o kernel/bounds.s kernel/bounds.c
make[2]: Verzeichnis â€ž/home/user/oscam/s3/support/crosstool/freetz-ng/source/kernel/ref-grx5-7590_07.20/linux-4.9â€œ wird verlassen
make[1]: Verzeichnis â€ž/home/user/oscam/s3/support/crosstool/freetz-ng/source/kernel/ref-grx5-7590_07.20/linux-4.9â€œ wird verlassen

[33mERROR: Build failed.[m

SaMMyMaster · 21. Oktober 2020

Bei mir lauft es ohne fehler durch.
Hast du auch das gemacht
./s3 tcupdate --update_me
./s3 tcupdate --reset

rolu2 · 21. Oktober 2020

Ja, habe ich. Heute nochmal getestet

Gleiche Fehlermeldung

ich teste mal ubuntu

SaMMyMaster · 21. Oktober 2020

mit Debian hatte ich damals auch immer probs. Da konnte ich images bauen wie ich wollte nur kein einzieges oscam lief

dewildschwein500 · 22. Oktober 2020

Hi,
wer pflegt eigentlich diesen Toolchain Bereich?

Sie müssen registriert sein, um Links zu sehen.

Einige davon nutzt ja Simplebuild, was recht komfortable ist, da man sich die Toolchain nicht selber erstellen lassen muss. Ich habe gestern z.B. mal die Toolchain anhand der "

Sie müssen registriert sein, um Links zu sehen.

"-Vorlage erstellen lassen; hat ca. 50 Minuten (Intel i7-8559U CPU) gedauert und ca. 10 GB Daten angehäuft.

Kann man sich evtl. neue Toolchaines für den toolchains-Bereich und somit auch für Simplebuild wünschen?

Suche

Suche

Simplebuild 3 (310 Final) de en bg es fr it nl pl pt tr language support

martin8310

Newbie

gorgone

Kind regards

martin8310

Newbie

Kind regards

martin8310

Newbie

dewildschwein500

Meister

Kind regards

dewildschwein500

Meister

martin8310

Newbie

rolu2

Anhänge

SaMMyMaster

Elite Lord

rolu2

SaMMyMaster

Elite Lord

dewildschwein500

Meister

Spenden Unterstützung

Simplebuild 3 (310 Final) *de en bg es fr it nl pl pt tr* language support

Newbie

Newbie

Newbie

Meister

Meister

Newbie

Anhänge

Elite Lord

Elite Lord

Meister

Spenden Unterstützung

Simplebuild 3 (310 Final) de en bg es fr it nl pl pt tr language support