Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

server und client: habe das Problem, dass ich auf meinem Client nicht mehr schauen kann.

    Nobody is reading this thread right now.
die einen kommen halt auf dem Server drauf, am besten über das WebIF ...
und die anderen am Client, da wo jetzt der Server eingerichtet ist auf der Box
 
sorry dat kapier ich jetzt nich, ich war immer noch bei dem rasperry

was muss auf en raperry??? welche configs,
was muss ich dann wo noch nachpflegen?? komme jetzt in Tockel,
im Moment läuft es ja, nur wenn ich den rasperry in Betrieb nehmen möchte, um
diese Dinge nicht mehr anfassen zu müssen, muss ich das checken, step by step,
ich hole jetzt die karten von oben solo2 (server), bevor ich die Karten dann einstecke,
was muss ich zuerst copieren, gehen wir mal so vor, wenn Du noch magst-----------> ich ein schwieriger Fall
 
Zuletzt bearbeitet:
habe ich gemacht, Karten sind drin, bei Status sagt er nur bei HD bei reader HD+, keine entis,meld Dich einfach
 
Zuletzt bearbeitet:
wie sind den überhaupt die Reader eingestellt, sprich die Easymäuse?
für die HDplus und meinen Configs sollten die so stehen:
Du musst angemeldet sein, um Bilder zu sehen.
 
bei dem rasperry habe ich jetzt3 schächte, sky in der Mitte und Hd oben
 
was hast du für einen Reader überhaupt?
3 schächte?
 
yes, kann mich erinnern, das ich das angegeben hatte, dev/oben und dev/mitte
 
was ist das für ein Ding?
 
rasperry psi3--> Raspberry, Netzteil, gehäuse, Cardreader und ipc oscam cardserver
 
Zuletzt bearbeitet:
meine "das Ding" wo du die Karten reinstopfst
den Reader/Kartenleser .... dieser wird dann per USB an den PI gesteckt

normalerweise wird sowas empfohlen:
Sie müssen registriert sein, um Links zu sehen.


da passt aber nur eine Karte rein, also bräuchtest du zwei,
du hast irgendwas mit 3 schächten,
dazu muss man wissen wie man "das Ding" einstellen kann, denn das ist auch wichtig für die Parameter welche man im Reader setzen muss
 
Zuletzt bearbeitet:
steht nich dran, ist einfach ein platinenteil mit 3 Karteneinsteckplätzen, von dort aus geht es per usb direkt in die 7490, bzw, über das Netzteil und von dort per usb zum Router
 
wieso in die 7490?
ein Kartenleser muss am Server dran sein, und das ist der PI bei dir,
du .... besorge dir 2 Easymäuse wie die aus dem Link und lasse noch die knapp 2 Wochen die Karten im Receiver
 
ok, habe die karten wieder umgesteckt, Recht Herzlichen Dank bis hierhin

Gruss Bernd

moin,

poste jetzt mal die live log und die configs von meinem Raspberry, wenn sich einer auskennt bitte mal drüber schauen, wo der Hase begraben liegt.

  • 2018/02/02 07:46:13 19C7DDBE r (reader) SKY_DE_V1X [mouse] Card type: P1TV
  • 2018/02/02 07:46:13 19C7DDBE r (reader) SKY_DE_V1X [mouse] Rom version: 10A7
  • 2018/02/02 07:46:13 19C7DDBE r (reader) SKY_DE_V1X [mouse] Unable to get smartcard credit
  • 2018/02/02 07:46:14 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
  • 2018/02/02 07:46:14 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] ERROR: Could not read reader->convention
  • 2018/02/02 07:46:14 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Error activating card.
  • 2018/02/02 07:46:14 19C7DDBE r (reader) SKY_DE_V1X [mouse] classD0 ins7E11: Scheduling card reset for TA1 change from 11 to 14
  • 2018/02/02 07:46:14 19C7DDBE r (reader) SKY_DE_V1X [mouse] found card system videoguard2
  • 2018/02/02 07:46:14 00000000 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r11398 (arm-linux-gnueabihf)
  • 2018/02/02 07:46:14 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2018/02/02 07:46:14 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] card detected
  • 2018/02/02 07:46:14 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] type: VideoGuard Sky Austria/Germany (09C4)
  • 2018/02/02 07:46:14 19C7DDBE r (reader) SKY_DE_V1X [mouse] Buffers readed 0 bytes total time_us 75123
  • 2018/02/02 07:46:14 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Buffers readed 0 bytes total time_us 75131
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Buffers readed 0 bytes total time_us 75136
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 1 value 7f time_us 16092
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 2 value bc time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 3 value 7f time_us 24
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 4 value 70 time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 5 value 8e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 6 value 8e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 7 value 8e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 8 value 4e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Buffers readed 8 bytes total time_us 92333
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] ATR: 3F FF 14 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 14
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Setting baudrate to 76800 bps
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Calculated work ETU is 13.03 us reader mhz = 357
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Buffers readed 0 bytes total time_us 75123
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] ERROR: Could not read reader->convention
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Error activating card.
  • 2018/02/02 07:46:16 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2018/02/02 07:46:16 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] card initializing error
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Card type: P1TV
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Rom version: 10A7
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Unable to get smartcard credit
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] FuseByte: 25
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Region Code: 00BO0102
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Country Code: DEU
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] Pincode read: 3185
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] PCB settings: FF FF FF FF
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] Parental control disabled
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] serial: ########, BoxID: ########, baseyear: 2004
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] ready for requests
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] found card system videoguard2
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] card detected
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] ------------------------------------------------------------------
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] +---------+----------+---------------------+---------------------+
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 0038 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003a --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003b --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003c --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003d --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003e --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 0037 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 007b --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 007d --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 0081 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 008e --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00e4 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00e5 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00f0 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00f3 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00ff --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] ------------------------------------------------------from-ins70--
    [global]

    logfile = /var/log/ipc/OScam.log
    unlockparental = 1
    nice = -10
    maxlogsize = 100
    waitforcards = 0
    preferlocalcards = 2
    emmlogdir =/etc/tuxbox/config

    [cache]

    [cccam]
    port = 16002,22209
    nodeid = B6552366101C13F4
    version = 2.3.0
    reshare = 1
    stealth = 1


    [webif]
    httpport = 91
    httpallowed = 0.0.0.0-255.255.255.0
    httposcamlabel = Oscam WebInterface


    [reader]
    label = SKY_DE_V1X
    description = V13
    protocol = mouse
    device = /dev/mitte
    caid = 09C4
    boxid = 12345678
    ins7e11 = 14
    detect = cd
    mhz = 357
    cardmhz = 357
    group = 1
    emmcache = 1,1,2,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    saveemm-u = 1
    ndsversion = 2

    [reader]
    label = reader0_hd+_hd02
    protocol = mouse
    device = /dev/oben
    caid = 1843
    boxkey = A7642F57BC96D37C
    rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
    detect = cd
    mhz = 600
    cardmhz = 357
    group = 1
    emmcache = 1,3,2,0
    blockemm-unknown = 1
    blockemm-g = 1
    saveemm-u = 1
    [account]
    user = dvbapi
    caid = 1843,09C4
    au = 1
    group = 1

    [account]
    user = party
    pwd = party
    caid = 1843,09C4
    au = 1
    group = 1

    [account]
    disabled = 1
    user = keller
    pwd = keller
    group = 1

    [account]
    disabled = 1
    user = fritz
    pwd = fritz
    group = 1
befindet sich alles im spoiler log

moin,

poste jetzt mal die live log und die configs von meinem
Sie müssen registriert sein, um Links zu sehen.
, wenn sich einer auskennt bitte mal drüber schauen, wo der Hase begraben liegt.

  • reader0_hd+_hd02 [mouse] Buffers readed 0 bytes total time_us 75131
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Buffers readed 0 bytes total time_us 75136
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 1 value 7f time_us 16092
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 2 value bc time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 3 value 7f time_us 24
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 4 value 70 time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 5 value 8e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 6 value 8e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 7 value 8e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Flush readed byte Nr 8 value 4e time_us 23
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Buffers readed 8 bytes total time_us 92333
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] ATR: 3F FF 14 25 03 10 80 41 B0 07 69 FF 4A 50 70 00 00 50 31 01 00 14
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Init card protocol T0, FI=1, F=372, D=8, N=3
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Setting baudrate to 76800 bps
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Calculated work ETU is 13.03 us reader mhz = 357
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] Buffers readed 0 bytes total time_us 75123
  • 2018/02/02 07:46:15 19C7DDBE r (reader) SKY_DE_V1X [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardclock of 3.57 MHz (specified in reader->mhz)
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] ATR: 0E E0 00 BC F2 FE 00 BC 7C FE 7E C1 7E
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] ERROR: Could not read reader->convention
  • 2018/02/02 07:46:15 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] Error activating card.
  • 2018/02/02 07:46:16 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2018/02/02 07:46:16 4195ABA9 r (reader) reader0_hd+_hd02 [mouse] card initializing error
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Card type: P1TV
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Rom version: 10A7
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Unable to get smartcard credit
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] FuseByte: 25
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Region Code: 00BO0102
  • 2018/02/02 07:46:16 19C7DDBE r (reader) SKY_DE_V1X [mouse] Country Code: DEU
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] Pincode read: 3185
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] PCB settings: FF FF FF FF
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] Parental control disabled
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] type: VideoGuard Sky Austria/Germany (09C4) FastMode, caid: 09C4
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] serial: ########, BoxID: ########, baseyear: 2004
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] ready for requests
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [mouse] found card system videoguard2
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] card detected
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] type: VideoGuard Sky Austria/Germany (09C4) FastMode
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] ------------------------------------------------------------------
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] +---------+----------+---------------------+---------------------+
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 0038 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003a --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003b --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003c --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003d --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 003e --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 0037 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 007b --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 007d --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 0081 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 008e --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00e4 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00e5 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00f0 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00f3 --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] |-- 00 ---|-- 00ff --| 2018/02/26-00:00:00 |
  • 2018/02/02 07:46:17 19C7DDBE r (reader) SKY_DE_V1X [videoguard2] ------------------------------------------------------from-ins70--

    logfile = /var/log/ipc/OScam.log
    unlockparental = 1
    nice = -10
    maxlogsize = 100
    waitforcards = 0
    preferlocalcards = 2
    emmlogdir =/etc/tuxbox/config

    [cache]

    [cccam]
    port = 16002,22209
    nodeid = B6552366101C13F4
    version = 2.3.0
    reshare = 1
    stealth = 1


    [webif]
    httpport = 91
    httpallowed = 0.0.0.0-255.255.255.0
    httposcamlabel = Oscam WebInterface

    #
    [reader]
    label = SKY_DE_V1X
    description = V13
    protocol = mouse
    device = /dev/mitte
    caid = 09C4
    boxid = 12345678
    ins7e11 = 14
    detect = cd
    mhz = 357
    cardmhz = 357
    group = 1
    emmcache = 1,1,2,0
    blockemm-unknown = 1
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    saveemm-u = 1
    ndsversion = 2

    [reader]
    label = reader0_hd+_hd02
    protocol = mouse
    device = /dev/oben
    caid = 1843
    boxkey = A7642F57BC96D37C
    rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
    detect = cd
    mhz = 600
    cardmhz = 357
    group = 1
    emmcache = 1,3,2,0
    blockemm-unknown = 1
    blockemm-g = 1
    saveemm-u = 1


    [account]
    user = dvbapi
    caid = 1843,09C4
    au = 1
    group = 1

    [account]
    user = party
    pwd = party
    caid = 1843,09C4
    au = 1
    group = 1

    [account]
    disabled = 1
    user = keller
    pwd = keller
    group = 1

    [account]
    disabled = 1
    user = fritz
    pwd = fritz
    group = 1

files liegen alle im Spoiler log, sorry
 
Zuletzt bearbeitet von einem Moderator:
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

R
Oscam Server zeigt die IP meines Synology anstatt die des Clients
2
Antworten
19
Aufrufe
463
salidos
S
optimale oscam Einstellung für Server & Client gesucht?
Antworten
11
Aufrufe
486
tem_invictus
A
Aussetzer bei Oscam Client mit V23 Karte
2
Antworten
23
Aufrufe
798
DarkStarXxX
D
gelöst Oscam Server hinter VPS Oscam Server Problem
2 3
Antworten
30
Aufrufe
767
TDCroPower
S
Probleme mit OSCam Client
Antworten
4
Aufrufe
530
Sir-ACE
S
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…