seit gestern ist meine VU+ dunkel.

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

Das System funktionierte ja paar Monate und die Dateien habe ich von einem Kollegen bekommen.
Ich musste die Dateien nur an die richtige Stelle kopieren.
Hatte aber auch von Anfang an geschrieben, dass ich nicht den richtigen Plan davon habe.

OK hier mal meine Dateien:

Conf:

Spoiler

[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 500
usrfile = /var/log/oscamuser.log


[cache]


[cccam]
port = 12000
nodeid = 4DD21212102513AC
version = 2.3.0


[dvbapi]
enabled = 1
au = 1
delayer = 60
user = dvbapi
boxtype = dreambox


[webif]
httpport = 17002
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.0-192.168.255.255

Server:

Spoiler

[reader]
label = skydeV14
enabled = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cardmhz = 2700
autospeed = 1

User:

Spoiler

[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
[account]
user = schlafzimmer
pwd = admin
group = 1
uniq = 3
group = 1,2,3, 4
caid = 098C
numusers = 1
penalty = 0

oscam.dvbapi

finde ich nicht !

 

[Pnaler]

AW: V14 Neuaktivierung gepaired?

wenn in der oscam.conf kein pfad angegeben wurde,dann werden die emm.log dateien da gespeichert, wo deine oscam config. dateien sind.

Die oscam.dvbapi musst du anlegegen mit notepad und sollte so aussehen:

P: 098C 1
I:0

wenn die karte mal läuft kannst du die eins hinter 098C wieder wegmachen,ist nur für den aktivierungsprozess.
Dann sollte es eigtl.funktionieren.

Wie lange hast du die Karte schon zu Hause? und welche oscam version ist auf der box?

 

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

Die Karte habe ich heute bekommen und ist seit heute Nachmittag im Receiver.

OSCam 1.20rev:10001

Die oscamp.dvbapi in den gleichen Ordner wie Cofig / User ?

 

[Pnaler]

AW: V14 Neuaktivierung gepaired?

Jo und dann viel Geduld.:382:


Natürlich die oscam nochmal neu starten

 

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

OK

OSCam neu gestartet. Im Log sieht es jetzt anders aus.
Wie groß darf die Log Datei denn werden? Oder soll man ohne Limit laufen lassen?
Grundeinstellung war 20 kb !

 

[Pnaler]

AW: V14 Neuaktivierung gepaired?

5 emms kommen pro std. bei neun std. hat das bei mir 16 kB belegt,zwischendurch mal kontrollieren ob schon was gekommen ist,die datei von der box auf den pc kopieren und datei von der box löschen,so gehts

 

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

Mh. Mein Log läuft jetzt von 22:28 bis jetzt und die Datei ist 600 kb groß.

Logge ich zuviel ?
Ich lasse jetzt die Nacht durchlaufen und gucke morgen mal nach emms.

Werde mich melden :ja

Vielen Dank erst einmal :emoticon-0142-happy

 

[Pnaler]

AW: V14 Neuaktivierung gepaired?

hast du auch wirklich nach dem emm.log geschaut. und kannst du im webif sehen, das uniq emms geblocked worden sind.

 

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

Wo sehe ich das ?
Kann ich den Log noch filtern?

 

[Pnaler]

AW: V14 Neuaktivierung gepaired?

im webif unter "Reader"


blocked

UK / G / S / U
20 0 0 10


Poste mal die emms, die du bis jetzt geloggt hast. Poste die bitte im "spoiler" (geh auf antworten,dann auf erweitert, über dem schreibfeld sind buttons. kopiere die emms ins schreibfeld,dann wählst du die alle aus und drückst auf den 7 Button von rechts. feddig

​

​

​

​

 

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

Bei mir steht 0 / 0 / 0 / 0

Ich habe auch keine emm.log Datei !

 

[HagenB]

AW: V14 Neuaktivierung gepaired?

Wird die Karte richtig eingelesen ? Im Webif unter Status muss CARDOK no entitlements stehen.

 

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

Ja steht auf CARDOK das no entitlement ist in rot geschrieben !

Im OSCam.log sieht es so aus:

Spoiler

2015/07/30 23:34:34 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10001 (mipsel-oe-linux-ssl)2015/07/30 23:34:34 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 17457
2015/07/30 23:34:34 0 s [Emu] OSEmu (built-in) version 708
2015/07/30 23:34:34 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/07/30 23:34:34 0 s signal handling initialized
2015/07/30 23:34:34 0 s cccam: initialized (fd=6, port=12000)
2015/07/30 23:34:34 0 s skydeV14 [internal] creating thread for device /dev/sci0
2015/07/30 23:34:34 0 s emulator [emu] creating thread for device emulator
2015/07/30 23:34:34 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/07/30 23:34:34 0 s waiting for local card init
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2015/07/30 23:34:34 545528 r key file not found in: /etc/tuxbox/config
2015/07/30 23:34:34 545528 r key file not found in: /var/keys
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] card detected
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] Card is present in readerslot!
2015/07/30 23:34:34 545528 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2015/07/30 23:34:34 54D6E8 h webif: decompressed 156697 bytes back into 373752 bytes
2015/07/30 23:34:34 54D6E8 h HTTP Server running. ip=0.0.0.0 port=17002
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] Set reader parameters!
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] Sent reader setting at cardinit T=0 fs=27 ETU=372 WWT=0 CWT=0 BWT=0 EGT=0 clock=0 check=0 P=0 I=0 U=0
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] Reset internal cardreader!
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] TEST tempo mhz check = 500 mhz
2015/07/30 23:34:34 5436F8 r skydeV14 [internal] Calculated work ETU is 20.67 us reader mhz = 450
2015/07/30 23:34:35 545528 r emulator [emu] card detected
2015/07/30 23:34:36 545528 r emulator [emu] found card system emu
2015/07/30 23:34:36 545528 r emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/30 23:34:36 545528 r key file not found in: /etc/tuxbox/config
2015/07/30 23:34:36 545528 r key file not found in: /var/keys
2015/07/30 23:34:38 5436F8 r skydeV14 [internal] Sent reader settings T=0 fs=6 ETU=93 WWT=57600 CWT=0 BWT=0 EGT=2 clock=0 check=0 P=5 I=50 U=0
2015/07/30 23:34:38 5436F8 r skydeV14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/07/30 23:34:39 5436F8 r skydeV14 [internal] Card type: P1TV
2015/07/30 23:34:39 5436F8 r skydeV14 [internal] Rom version: 20AA
2015/07/30 23:34:39 5436F8 r skydeV14 [internal] Credit available on card: 0 euro
2015/07/30 23:34:39 5436F8 r skydeV14 [internal] Extended 4C detected
2015/07/30 23:34:39 5436F8 r skydeV14 [internal] FuseByte: 00
2015/07/30 23:34:39 5436F8 r skydeV14 [internal] Region Code:
2015/07/30 23:34:39 5436F8 r skydeV14 [internal] Country Code: DEU
2015/07/30 23:34:40 5436F8 r skydeV14 [internal] Pincode read: 1177
2015/07/30 23:34:40 5436F8 r skydeV14 [internal] PCB settings: FF FF FF FF
2015/07/30 23:34:40 5436F8 r skydeV14 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/07/30 23:34:40 5436F8 r skydeV14 [internal] serial: ########, BoxID: ########, baseyear: 2004
2015/07/30 23:34:40 5436F8 r skydeV14 [internal] ready for requests
2015/07/30 23:34:40 5436F8 r skydeV14 [internal] found card system videoguard2
2015/07/30 23:34:40 5436F8 r skydeV14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/07/30 23:34:40 5436F8 r skydeV14 [videoguard2] card detected
2015/07/30 23:34:40 5436F8 r skydeV14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/07/30 23:34:43 0 s init for all local cards done
2015/07/30 23:34:43 0 s anti cascading disabled
2015/07/30 23:34:43 569E60 c plain dvbapi-client granted (dvbapi, au=auto (2 reader))
2015/07/30 23:34:43 569E60 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2015/07/30 23:34:43 56C690 c anonymous disconnected from 192.168.1.25
2015/07/30 23:34:48 569E60 c [ADD PID 0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
2015/07/30 23:34:48 569E60 c [ADD PID 1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
2015/07/30 23:34:48 569E60 c [ADD PID 2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
2015/07/30 23:34:48 569E60 c [ADD PID 3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
2015/07/30 23:34:48 569E60 c [ADD PID 4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
2015/07/30 23:34:48 569E60 c Found 5 ECMpids and 3 STREAMpids in PMT
2015/07/30 23:34:48 569E60 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0001 index 0000 pmtpid 0061
2015/07/30 23:34:48 569E60 c New program number: 0017 (1702:0017 unknown) [pmt_list_management 3]
2015/07/30 23:34:48 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:48 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:49 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:49 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:49 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:50 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:50 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:50 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:50 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:51 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:51 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:51 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:52 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:52 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:52 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:53 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:53 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:53 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:53 55A3F8 c encrypted cccam-client 192.168.1.25 granted (schlafzimmer, au=off)
2015/07/30 23:34:53 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:54 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:54 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:54 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:55 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:55 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:55 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:56 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:56 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:56 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:56 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:57 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:57 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:57 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:58 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:58 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:58 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:59 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:59 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:34:59 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:34:59 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:35:00 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:35:00 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:35:00 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:35:01 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2015/07/30 23:35:01 569E60 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
2015/07/30 23:35:01 569E60 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

Geht dann so weiter bis 23:54

 

[dia]

AW: V14 Neuaktivierung gepaired?

karte wird nicht richtig gelesen
poste mal deine configs bitte

 

[Kartprofi]

AW: V14 Neuaktivierung gepaired?

Config:

Spoiler

[global]logfile = /var/log/oscam.log
nice = -1
maxlogsize = 25000
usrfile = /var/log/oscamuser.log
emmlogdir = /var/log/emm/


[cache]


[cccam]
port = 12000
nodeid = 4DD21212102513AC
version = 2.3.0


[dvbapi]
enabled = 1
au = 1
delayer = 60
user = dvbapi
boxtype = dreambox


[webif]
httpport = 17002
httpuser = oscam
httppwd = oscam
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.0-192.168.255.255

Server:

Spoiler

[reader]label = skydeV14
enabled = 1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cardmhz = 2700
autospeed = 1

User:

Spoiler

[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
[account]
user = schlafzimmer
pwd = admin
group = 1
uniq = 3
group = 1,2,3, 4
caid = 098C
numusers = 1
penalty = 0

dvbapi:

Spoiler

P: 098C 1
I:0