Problema sbalzi ecm

Dieses Thema im Forum "OScam (Italiana)" wurde erstellt von jimmypage, 2. September 2013.

  1. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    ho questa configurazione su decoder con card 09cd reader interno

    [reader]
    Label = skyitalia
    detect = CD
    caid = 09CD
    Protocol = internal
    Device = /dev/sci0
    cardmhz = 357
    mhz = 357
    ins7e11 = 15
    Fallback = 0
    Group = 1
    emmcache = 1,3,2
    BoxID = xxxxxx
    ident = 000000
    blockemm-u = 1
    blockemm-s = 1
    blockemm-g = 1
    #blocknano =

    ecm sui 0,60ms ma con sbalzi che superano i mille,
    c'è una configurazione migliore per evitare questi sbalzi?

    grazie
     
    #1
  2. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.240
    Punkte für Erfolge:
    113
    AW: sbalzi ecm

    Posta per favore un log di quando i tempi si sbalzano...
     
    #2
  3. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: sbalzi ecm

    pezzetto di log

    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/2505/B7:158408A1B059CC7E38ADB9CF9F899BBA): found (865 ms) by skyitalia
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/1FBA/B7:A34EBE9B89E5F4994636A66B5B8C88E9): found (865 ms) by skyitalia
    2013/09/02 20:27:02 100FA130 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/0F42/B7:7108588BEE8FE841FCDCBFB3118559E9): not found (874 ms) by skyitalia
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/2CBD/B7:D74DF5EB72A6EF9051BDB2461F347085): found (660 ms) by skyitalia
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/379D/B7:8B75DA1F7F33A81F0E898D7323AB5524): found (534 ms) by skyitalia
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/3BC5/B7:DF6CC00CD58199E028B4665012A4804E): found (436 ms) by skyitalia
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/2DC3/B7:D67880A99ADFB1591F58719A82C2A761): found (451 ms) by skyitalia
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/0FBD/B7:B1B6C7F727B9F3F700193C2F2EE8D96A): found (254 ms) by skyitalia
    2013/09/02 20:27:02 100FA130 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/09/02 20:27:02 10102D70 c pino63 (09CD&000000/0000/2BD0/B7:DFDE9029A51F7A0483E9F12E26F907D2): not found (28 ms) by skyitalia
    2013/09/02 20:27:03 10102D70 c pino63 (09CD&000000/0000/3C01/B7:0E0A45716B4C065A761C211C7C5B0ACA): found (49 ms) by skyitalia
    2013/09/02 20:27:03 100FA130 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/09/02 20:27:03 10102D70 c pino63 (09CD&000000/0000/2D65/B7:083118157357DE3B39E9D029492849FE): not found (28 ms) by skyitalia
    2013/09/02 20:27:03 10102D70 c pino63 (09CD&000000/0000/0DB8/B7:98644BE9FA24F5DF7EDCA287473D95A2): found (51 ms) by skyitalia
    2013/09/02 20:27:03 10102D70 c pino63 (09CD&000000/0000/057C/B7:E7CD8009A7C358620E87D2E570044D56): found (48 ms) by skyitalia
    2013/09/02 20:27:04 10102D70 c pino63 (09CD&000000/0000/2B5D/B7:88C66B40EF8F3D38F7E1A47E1517A025): found (49 ms) by skyitalia
    2013/09/02 20:35:38 10109FF8 c porc (09CD&000000/0000/D42F/B7:E733B3BAC5541A1452FA948B19B8BD1F): found (46 ms) by skyitalia
    2013/09/02 20:35:38 100DFA08 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/09/02 20:35:38 100FAF48 c pino63 (09CD&000000/0000/2D68/B7:68E52573E770AB1C5B00A4C3BDB307CF): not found (32 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/1C38/B7:D01CE3C907638A82E18A9E86011CA286): found (1222 ms) by skyitalia
    2013/09/02 20:35:40 10109FF8 c porc (09CD&000000/0000/1C38/B7:D01CE3C907638A82E18A9E86011CA286): cache2 (1158 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/2DCA/B7:AEC71AC0D50DEF5C4802CE3E204F1ACC): found (1176 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/2B7C/B7:0E25330FCE3CCC1342E6C5FEDCE6FBF9): found (1215 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/1FBA/B7:CAC1BC967F2999D81A105FD33DBDA2EA): found (997 ms) by skyitalia
    2013/09/02 20:35:40 100DFA08 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/2B0F/B7:04C48176317496E0059CDF9D8CE807CF): not found (878 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/2B1B/B7:8ED8ED0B086383A1F7AC16AE43B23069): found (795 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/2B16/B7:398A2536EF2668D2E896178DD8FA9723): found (846 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/1E5D/B7:3C64CB6D6C9F39D1FE261C8ABFB70567): found (779 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/2AAD/B7:A9989D5460184E59DAB5248342FED9F8): found (806 ms) by skyitalia
    2013/09/02 20:35:40 100DFA08 r skyitalia [videoguard2] classD3 ins54: status 90 00 = ok but cw=00 -> channel not subscribed
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/2BCC/B7:9430468293BA2AF89CBE583AD914B00A): not found (792 ms) by skyitalia
    2013/09/02 20:35:40 100FAF48 c pino63 (09CD&000000/0000/3BCB/B7:244473FE8524D755C0DAA638862EA9C4): found (767 ms) by skyitalia
     
    Zuletzt bearbeitet: 2. September 2013
    #3
  4. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.240
    Punkte für Erfolge:
    113
    AW: sbalzi ecm

    Posta per favore anche la oscam.conf oscam.user e oscam.dvbapi

    Sent from my GT-I9300 using Tapatalk 4
     
    #4
  5. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: sbalzi ecm

    ok grazie meister

    oscam user
    [account]
    user = dvbapi
    pwd =
    group = 1,2
    au = 1
    suppresscmd08 = 1
    blockemm-u = 0
    saveemm-u = 1
    #savenano = all
    blockemm-s = 0
    blockemm-g = 0

    [account]
    user = pino63
    pwd = pino63
    au = skyitalia,srg
    group = 1,2
    cccmaxhops = 5
    cccreshare = 3

    oscam conf
    [global]
    Nice = -1
    ClientTimeout = 5
    Level = 15
    CacheDelay = 120
    NoCache = 0
    logfile = /var/log/oscam.log
    maxlogsize = 256
    saveinithistory = 1

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = ipbox
    user = dvbapi
    pmt_mode = 0


    [cccam]
    port = 13000
    version = 2.2.1
    ignorereshare = 1
    reshare_mode = 0



    [newcamd]
    Key = 0102030405060708091011121314
    Port = 11500@09CD:000000;11501@183D:005411;11502@0500:023800

    [monitor]
    Port = 0

    [webif]
    httpport = xxxxxxxx
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
     
    #5
  6. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.632
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: sbalzi ecm

    la conf io la cambierei cosí

    [global]
    Nice = -1
    logfile = /var/log/oscam.log
    preferlocalcards = 1

    [dvbapi]
    enabled = 1
    au = 1
    boxtype = ipbox
    user = dvbapi



    [cccam]
    port = 13000
    version = 2.2.1
    ignorereshare = 1
    reshare_mode = 0



    [newcamd]
    Key = 0102030405060708091011121314
    Port = 11500@09CD:000000;11501@183D:005411;11502@0500:023 800

    [monitor]
    Port = 0

    [webif]
    httpport = xxxxxxxx
    httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
     
    #6
  7. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: sbalzi ecm

    ho provato la configurazione di elcoro ma il problema persiste...e gli ecm si sono alzati a 200ms
     
    #7
  8. meister85
    Offline

    meister85 VIP

    Registriert:
    21. September 2009
    Beiträge:
    7.927
    Zustimmungen:
    5.240
    Punkte für Erfolge:
    113
    AW: sbalzi ecm

    e la oscam.dvbapi? Non dirmi che non la usi???
     
    #8
  9. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: sbalzi ecm

    certo che c'è...:DDD

    #
    # dvbapi configuration
    #
    # types:
    # P - Priority
    # format:
    # P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
    # I - Ignore
    # format:
    # I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
    # M - Map
    # format:
    # M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
    # D - Delay
    # format:
    # D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
    #
    #
    #P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel
    #P: 1722 # prioritize 1722
    #P: 1830::EF75 # prioritize 1830 on channel EF75 only
    #M: 1830 1830:003411 # map caid 1830 always to provider 003411
    #D: 1702 200 # wait 200ms before writing cw on caid 1702
    #I: :002000 # ignore provider 002000 on every channel
    #I: 0 # ignore every caid that was not handled before
    #P: 0500:023800 # prioritize 0500 with provider 023800

    # NON TOGLIERLO !! ( da' la precedenza alla card locale)
    P: 093B
    P: 183D

    # for new oscam with liboscam-stapi => 0.06
    # LIVE
    ##s: PTI2 pmt.tmp
    # TIMESHIFT
    ##s: PTI pmt1.tmp
    # PIP
    ##s: PTI3 pmt2.tmp
    # TERRESTRIAL
    # RECORD

    #s: PTI pmt.tmp
    #s: PTI1 pmt.tmp
    #s: PTI2 pmt.tmp
    #s: PTI3 pmt.tmp
    #s: PTI4 pmt.tmp

    #s: PTI pmt1.tmp
    #s: PTI1 pmt1.tmp
    #s: PTI2 pmt1.tmp
    #s: PTI3 pmt1.tmp
    #s: PTI4 pmt1.tmp

    #s: PTI pmt2.tmp
    #s: PTI1 pmt2.tmp
    #s: PTI2 pmt2.tmp
    #s: PTI3 pmt2.tmp
    #s: PTI4 pmt2.tmp
     
    #9
  10. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.632
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: sbalzi ecm

    E come Mai nn aggiungi

    P : 09CD
     
    #10
  11. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: sbalzi ecm

    he l'ho notato anche io ma adesso il problema è un altro porc.....:emoticon-0107-sweat

    non riesco a modificare il file,
    la cartella ha permessi 775, il file anche ma mi dice permessi negati con ftp.

    ho provato da putty copiando il file oscam.dvbapi modificato nella cartella tmp e poi spostandolo col comando
    mv /tmp/oscam.dvbapi /var/tuxbox/config

    ma mi da
    No space left on device
    lo spazio dovrebbe esserci perchè il file lo posso copiare nelle altre cartelle.
    ho provato anche a modificare altri file tipo oscam.user, ma ho lo stesso errore,
    insomma nella cartella config non posso fare niente.
     
    Zuletzt bearbeitet: 4. September 2013
    #11
  12. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.632
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: sbalzi ecm

    Se nn ti Fa modificare e perché devi fare il Login da Root,
    se sei dentro al Decoder basta Che fai tramite telnet

    vi / var/ tuxbox/config/oscam.dvbapi
    per modificare premere A

    dopo modificato piggia 2x ESC poi :wq enter

    cosí sei di nuovo uscito fuori
     
    Zuletzt bearbeitet: 4. September 2013
    #12
  13. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: sbalzi ecm

    non salva il file in nessun modo, mi sa che si è corrotto qualcosa nel sistema....

    trovato l'inghippo....avevo attivato il salvataggio del log e mi bloccava tutto.

    adesso faccio un po di test con questa modifica e vediamo se questi sbalzi finiscono.
     
    Zuletzt bearbeitet: 4. September 2013
    #13
  14. jimmypage
    Offline

    jimmypage Ist oft hier

    Registriert:
    31. Oktober 2012
    Beiträge:
    139
    Zustimmungen:
    1
    Punkte für Erfolge:
    18
    AW: sbalzi ecm

    niente da fare, passa da 0,055 fino ad arrivare 800-1000 e questo molto spesso con freeze frequenti,

    oscam.dvbapi
    #
    # dvbapi configuration
    #
    # types:
    # P - Priority
    # format:
    # P: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
    # I - Ignore
    # format:
    # I: <caid>:[<provider>]:[<srvid>]:[<ecmpid>]
    # M - Map
    # format:
    # M: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <target caid>:[<target provider>]
    # D - Delay
    # format:
    # D: <caid>:[<provider>]:[<srvid>]:[<ecmpid>] <delay (ms)>
    #
    #
    #P: :::1BCD # prioritize ecm stream with pid 1BCD on any channel
    #P: 1722 # prioritize 1722
    #P: 1830::EF75 # prioritize 1830 on channel EF75 only
    #M: 1830 1830:003411 # map caid 1830 always to provider 003411
    #D: 1702 200 # wait 200ms before writing cw on caid 1702
    #I: :002000 # ignore provider 002000 on every channel
    #I: 0 # ignore every caid that was not handled before
    #P: 0500:023800 # prioritize 0500 with provider 023800

    # NON TOGLIERLO !! ( da' la precedenza alla card locale)
    P: 09CD
    P: 183D

    # for new oscam with liboscam-stapi => 0.06
    # LIVE
    ##s: PTI2 pmt.tmp
    # TIMESHIFT
    ##s: PTI pmt1.tmp
    # PIP
    ##s: PTI3 pmt2.tmp
    # TERRESTRIAL
    # RECORD

    #s: PTI pmt.tmp
    #s: PTI1 pmt.tmp
    #s: PTI2 pmt.tmp
    #s: PTI3 pmt.tmp
    #s: PTI4 pmt.tmp

    #s: PTI pmt1.tmp
    #s: PTI1 pmt1.tmp
    #s: PTI2 pmt1.tmp
    #s: PTI3 pmt1.tmp
    #s: PTI4 pmt1.tmp

    #s: PTI pmt2.tmp
    #s: PTI1 pmt2.tmp
    #s: PTI2 pmt2.tmp
    #s: PTI3 pmt2.tmp
    #s: PTI4 pmt2.tmp
     
    #14
  15. elcoro
    Offline

    elcoro Moderator Digital Eliteboard Team

    Registriert:
    1. Juli 2011
    Beiträge:
    1.632
    Zustimmungen:
    638
    Punkte für Erfolge:
    113
    Beruf:
    Storehouse
    Ort:
    nel Mondo
    AW: sbalzi ecm

    non é che ai qualche proxi che ti succia tutto?
     
    #15

Diese Seite empfehlen

OK Mehr information

Diese Seite verwendet Cookies. Mit Ihrem Klick auf OK stimmen Sie der Verwendung von Cookies zu. Andernfalls ist die Funktionalität dieser Website beschränkt.