M-Box Richtige einstellung Dreambox 500s MPCS S02 Karte?

[ACIID]

Hi Leute,

Im Mbox Control Manger ist die Karte Grün aber die Karte wird nicht verwendet.
Das heißt die Karte wird nicht gelesen.
Vielleicht kann ja mal jemand kucken was da in der config falsch ist.



Dreambox 500s mit S02 Karte mit ner Mbox

mpcs.user
[account]
User = dummy1
Pwd  = dummy1
# 0 1 2 3
# 0 - disable
# 1 - per IP
# 2 - 1 user per Port
# 3 - only 1 user allow for all port
# 10 - spider per IP
# 20 - spider 1 user per Port
# 30 - spider only 1 user allow for all port
Uniq  = 1
Group = 1
#AU disable
#AU = 0
# this is auto AU reader
#AU = 1
#AU single reader
#AU = bulsat
EndDate = 2009-12-31

mpcs.server
[reader]
Label               = newcamd
Protocol            = newcamd
Key                 = 0102030405060708091011121314
Device              = 127.0.0.1,13000
Account             = dummy1,dummy1
Fallback            = 1
Group               = 1
ReconnectTimeout    = 20
DisableServerFilter = 1

#[reader]
#Label               = cs357x
#Protocol            = camd35
#Device              = 192.168.0.250,16000
#Account             = matthias,cwdbox2
#Fallback            = 0
#Group               = 1

#[reader]
#Label               = cs378x
#Protocol            = cs378x
#Device              = 127.0.0.1,6002
#Account             = login,password
#Fallback            = 0
#Group               = 1

#[reader]
#Label               = mouse
#Protocol            = mouse
#Device              = /dev/ttyS1
#Fallback            = 0
#Group               = 1
#EMMCache            = 1,1,2

#[reader]
#Label               = server
#Protocol            = gbox
#Device              = 192.168.0.250,8020,8030
#Account             = 192.168.0.14,DC82A6F9
#Fallback            = 0
#CAID                = 0000&000000
#Group               = 1

#[reader]
#Label               = pc
#Protocol            = gbox
#Device              = 192.168.0.14,8090,8070
#Account             = 192.168.0.14,AAAAA015
#Fallback            = 0
#CAID                = 0000&000000
#Group               = 1

#[reader]
#Label               = dbox
#Protocol            = gbox
#Device              = 192.168.0.10,8030
#Account             = 192.168.0.14,AAAAA010
#Fallback            = 0
#CAID                = 0000&000000
#Group               = 1

#[reader]
#Label               = server-vpn
#Protocol            = gbox
#Device              = 192.168.0.250,8020,8020
#Account             = 192.168.15.201,DC82A6F9
#Fallback            = 0
#CAID                = 0000&000000
#Group               = 1
#password            = AAAAA201

#[reader]
#Label               = test
#Protocol            = pandora
#Device              = 127.0.0.1,666
##u need only password for pandora
#Account             = same_like_pas,pass
#Fallback            = 0
#Group               = 1

mpcs.reader
[reader]
blockemm         = C0,03,22
blockua          = 0
blockga          = 0
blocksa          = 0
AU               = 1
Enable           = 1
Label            =  Dreambox Reader
Protocol         = internal
Device           = /dev/sci0
BaudRate         = 9600
bits     = 7/8
stopbits = 1/2
parity   = odd/even/none
flowcontrol= hard/soft/none
EMMCache         = 1,1,10
Detect           = none
Group            = 1
CAID             = 1702

mpcs.conf
[global]
Nice            = -1
ClientTimeout   = 4
ClientMaxIdle   = 60
CacheDelay      = 0
FallbackTimeout = 1
BindWait        = 10
ResolveDelay    = 10
DyndnsInterval  = 120
LogFile         = stdout
#PidFile         = /ramdsk/my.pid
#MaxLogSize     = 102400
showecmdw = 0
showemmdw = 0
disablecache1 = 0
disablecache2 = 0
disablecache = 0
Filter = 1500
ReaderAlarm   = 0
WaitCards=0

[newcamd]
Key  = 0102030405060708091011121314
Port = 13000@1702:000000;

C: { 127.0.0.1 13000 dummy1 dummy1 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 20 } { 1702FFFF:17020000 }

Die Cline rennt mit NEWCS eins A an der sollte es nicht liegen.

Danke euch im Vorraus.