Reader werden nicht erkannt

Pommfritz · 24. April 2017

Hallo,
habe die Tage einen Raspberry mit ipc drauf zum laufen gebracht. Oscam installiert usw., leider bekomme ich die zwei Easymouse 2 nicht zum laufen. Udev Regeln habe ich erstellt und die Symlinks werden erzeugt (denke ich):

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A4036VXK", SYMLINK+="hdplus"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A4036VL6", SYMLINK+="sky"

Im Webif von Oscam kommt allerdings nur Error...
oscam.server:

[reader]
label = sky
protocol = mouse
device = /dev/sky
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 14
detect = cd
group = 1
emmcache = 1,3,12,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cccreshare = 1
auprovid = 000001

[reader]
label = hdplus
protocol = mouse
device = /dev/hdplus
autospeed = 0
caid = 1830
boxkey = xxx
rsakey = xxx
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,2,2,0
cccreshare = 1
auprovid = 000001

Vielleicht kann mir da jemand weiterhelfen. Ich muß aber gleich anmerken, daß ich kein Linux-Experte bin und mir das alles nach diversen Anleitungen erarbeitet habe. Habe Putty und Winscp dafür verwendet.

Danke schonmal im vorraus

axel · 24. April 2017

Hi,

hast Du Debian installiert, während die Easymouses eingesteckt waren?

Poste mal ein Log ab Neustart Oscam.

Gruß

Pommfritz · 24. April 2017

Hallo,
als ich Debian Jessie Lite installiert habe, hat noch keine Easymouse drangesteckt.

2017/04/24 12:09:05 00000000 s (main) System name = Linux
2017/04/24 12:09:05 00000000 s (main) Host name = raspberrypi
2017/04/24 12:09:05 00000000 s (main) Release = 4.4.50-v7+
2017/04/24 12:09:05 00000000 s (main) Version = #970 SMP Mon Feb 20 19:18:29 GMT 2017
2017/04/24 12:09:05 00000000 s (main) Machine = armv7l
2017/04/24 12:09:05 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 3297
2017/04/24 12:09:05 00000000 s (config) userdb reloaded: 22 accounts loaded, 0 expired, 0 disabled
2017/04/24 12:09:05 00000000 s (main) signal handling initialized
2017/04/24 12:09:05 00000000 s (net) cs357x: initialized (fd=5, port=33371)
2017/04/24 12:09:05 00000000 s (net) cs378x: initialized (fd=6, port=33361)
2017/04/24 12:09:05 00000000 s (net) newcamd: initialized (fd=7, port=22000)
2017/04/24 12:09:05 00000000 s (net) -> CAID: 1830 PROVID: 003411
2017/04/24 12:09:05 00000000 s (net) cccam: initialized (fd=8, port=33360)
2017/04/24 12:09:05 00000000 s (reader) sky [mouse] creating thread for device /dev/sky
2017/04/24 12:09:05 00000000 s (reader) hdplus [mouse] creating thread for device /dev/hdplus
2017/04/24 12:09:05 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2017/04/24 12:09:05 00000000 s (main) waiting for local card init
2017/04/24 12:09:05 2E6D53EA h (webif) webif: decompressed 182761 bytes back into 433032 bytes
2017/04/24 12:09:05 2E6D53EA h (webif) HTTP Server running. ip=0.0.0.0 port=16002
2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 1 value 03 time_us 9379
2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 2 value 00 time_us 14946
2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 3 value 56 time_us 17974
2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 4 value ff time_us 14973
2017/04/24 12:09:05 357C9891 r (reader) sky [mouse] Flush readed byte Nr 5 value 00 time_us 14976
2017/04/24 12:09:05 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75101
2017/04/24 12:09:05 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 1 value 03 time_us 6700
2017/04/24 12:09:05 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 2 value 40 time_us 957
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 3 value 37 time_us 34983
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 4 value 5b time_us 982
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 5 value bf time_us 1981
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 6 value f5 time_us 1980
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 7 value fe time_us 988
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 8 value 0f time_us 1981
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 9 value 7d time_us 1979
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 10 value f2 time_us 970
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 11 value af time_us 1981
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 12 value 69 time_us 1992
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 13 value 00 time_us 981
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 6 value 03 time_us 63528
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 14 value ad time_us 1980
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 15 value f5 time_us 1970
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 16 value f0 time_us 975
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 17 value ff time_us 1980
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 18 value ff time_us 1987
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 19 value f5 time_us 983
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 20 value 73 time_us 1980
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Flush readed byte Nr 21 value 3f time_us 1976
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 7 value 00 time_us 15425
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 8 value 56 time_us 17977
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 9 value ff time_us 14967
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 10 value 00 time_us 14977
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 11 value 76 time_us 14971
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 21 bytes total time_us 147797
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Reader initialized (device=/dev/hdplus, detect=cd, mhz=368, cardmhz=368)
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 12 value 7e time_us 14992
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 13 value 71 time_us 14951
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 14 value 80 time_us 19981
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 15 value 1d time_us 18971
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 16 value ff time_us 20016
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 17 value dd time_us 21931
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 18 value 8d time_us 18964
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 19 value 7d time_us 19979
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 20 value 35 time_us 18971
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 21 value f5 time_us 19953
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 22 value 73 time_us 18986
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 23 value d3 time_us 19974
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 24 value b3 time_us 18985
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 25 value fb time_us 19975
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 26 value b5 time_us 18967
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 27 value 59 time_us 19979
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 28 value 91 time_us 18981
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 29 value 1d time_us 19978
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 30 value 3d time_us 18974
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 31 value 93 time_us 19977
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Flush readed byte Nr 32 value 79 time_us 18976
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 32 bytes total time_us 692380
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75098
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Reader initialized (device=/dev/sky, detect=cd, mhz=357, cardmhz=357)
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] card detected
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] card detected
2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75104
2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75101
2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ATR: FF 00
2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ERROR: Could not read reader->convention
2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] Error activating card.
2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] ATR:
2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Setting baudrate to 39638 bps
2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Calculated work ETU is 25.27 us reader mhz = 368
2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75126
2017/04/24 12:09:08 7B4F4DF6 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75125
2017/04/24 12:09:10 357C9891 r (reader) sky [mouse] Flush readed byte Nr 1 value 93 time_us 58983
2017/04/24 12:09:10 357C9891 r (reader) sky [mouse] Buffers readed 1 bytes total time_us 134212
2017/04/24 12:09:11 7B4F4DF6 r (reader) hdplus [mouse] card system not supported
2017/04/24 12:09:11 7B4F4DF6 r (reader) hdplus [mouse] Normal mode failed, reverting to Deprecated Mode
2017/04/24 12:09:11 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75125
2017/04/24 12:09:11 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75127
2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] ATR: FE 0F 7D F2 AF 69 00 AD F5 F0 FF FF F5 73
2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] ERROR: Could not read reader->convention
2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] Error activating card.
2017/04/24 12:09:12 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75123
2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] ATR:
2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Init card protocol T0, FI=9, F=512, D=16, N=255
2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Setting baudrate to 111600 bps
2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75124
2017/04/24 12:09:13 357C9891 r (reader) sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2017/04/24 12:09:13 7B4F4DF6 r (reader) hdplus [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2017/04/24 12:09:13 7B4F4DF6 r (reader) hdplus [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2017/04/24 12:09:13 7B4F4DF6 r (reader) hdplus [mouse] Calculated work ETU is 101.09 us reader mhz = 368
2017/04/24 12:09:14 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75125
2017/04/24 12:09:14 7B4F4DF6 r (reader) hdplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.68 MHz (specified in reader->mhz)
2017/04/24 12:09:14 357C9891 r (reader) sky [mouse] card system not supported
2017/04/24 12:09:14 357C9891 r (reader) sky [mouse] Normal mode failed, reverting to Deprecated Mode
2017/04/24 12:09:14 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75237
2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] ATR:
2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75099
2017/04/24 12:09:16 357C9891 r (reader) sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2017/04/24 12:09:17 7B4F4DF6 r (reader) hdplus [mouse] card system not supported
2017/04/24 12:09:17 7B4F4DF6 r (reader) hdplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/04/24 12:09:17 7B4F4DF6 r (reader) hdplus [mouse] card initializing error
2017/04/24 12:09:18 357C9891 r (reader) sky [mouse] Warning: Card returned error on setting ifsd value to 251
2017/04/24 12:09:19 357C9891 r (reader) sky [mouse] detect native nagra card
2017/04/24 12:09:20 357C9891 r (reader) sky [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2017/04/24 12:09:22 357C9891 r (reader) sky [mouse] T1 Resync command error, trying to reactivate!
2017/04/24 12:09:22 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75122
2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] ATR:
2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Setting baudrate to 111600 bps
2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75124
2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2017/04/24 12:09:23 357C9891 r (reader) sky [mouse] Card responded ok for ifsd request of 251
2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] Negotiate sessionkey was not successful! Please check rsa key and boxkey
2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] card system not supported
2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2017/04/24 12:09:24 357C9891 r (reader) sky [mouse] card initializing error
2017/04/24 12:09:25 00000000 s (main) init for all local cards done
2017/04/24 12:09:25 00000000 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2017/04/24 12:09:25 00000000 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2017/04/24 12:09:25 00000000 s (anticasc) anti cascading disabled

axel · 24. April 2017

Hi,

die Easymouses werden erkannt, Du hast ein Problem mit den Karten...

2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] card detected

2017/04/24 12:09:06 357C9891 r (reader) sky [mouse] Buffers readed 0 bytes total time_us 75104

2017/04/24 12:09:06 7B4F4DF6 r (reader) hdplus [mouse] Buffers readed 0 bytes total time_us 75101

2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ATR: FF 00

2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] ERROR: Could not read reader->convention

2017/04/24 12:09:08 357C9891 r (reader) sky [mouse] Error activating card.

Gruß

Pommfritz · 24. April 2017

Wenn ich die in meine Fritzbox mit freetz einstecke, laufen die astrein...
Komischerweise wurde die HD01 schon erkannt, die Sky-Karte noch gar nicht...

Kann das auch irgendwie an der Stromversorgung des Raspi liegen?
Habe dieses Netzteil:

Sie müssen registriert sein, um Links zu sehen.

axel · 24. April 2017

Hi,

ok poste mal bitte die kompletten Konfigs. Vielleicht hat dann jemand eine Idee, ich gerade leider nicht.

Gruß

Pommfritz · 24. April 2017

oscam.config

[global]
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480

[cache]

[cs357x]
port = 33371
suppresscmd08 = 1

[cs378x]
port = 33361
suppresscmd08 = 1

[newcamd]
port = 22000@1830:003411
key = 0102030405060708091011121314

[cccam]
port = 33360
nodeid = A82EFC3910F91548
version = 2.3.0
reshare_mode = 1

[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255

oscam.server

[reader]
label = sky
protocol = mouse
device = /dev/sky
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 14
detect = cd
group = 1
emmcache = 1,3,12,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cccreshare = 1
auprovid = 000001

[reader]
label = hdplus
protocol = mouse
device = /dev/hdplus
autospeed = 0
caid = 1830
boxkey = xxx
rsakey = xxx
detect = cd
mhz = 368
cardmhz = 368
ident = 1830:000000,003411,008011
group = 2
emmcache = 1,2,2,0
cccreshare = 1
auprovid = 000001

[reader]
label = OSEmu
enable = 0
protocol = cs357x
device = 127.0.0.1,33371
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 3

Reicht das?

czutok · 24. April 2017

bei dem sky reader fehlen dir die freqenzen

mhz =
cardmhz =

Derek Buegel · 24. April 2017

... oder autospeed = 1, sollte es auch tun - fürs Erste.

MfG

dodo83 · 24. April 2017

Autospeed geht nich bei den Mäusen da diese ha fest per Dip Schalter getaktet werden.
Wie stehen diese?

Gesendet von meinem LG-D855 mit Tapatalk

janni1 · 24. April 2017

Hi,
ich würde evtl. mal ein anderes Netzteil oder einen aktiven USB-Hub versuchen.
Dein Netzteil hat wohl laut Amazon-Bewertungen immer mal wieder "Unterspannungsprobleme".

Achso und
Autospeed funktioniert nur mit internen Readern und mit Smargos.

Autospeed: Sets mhz according to atr for smargo readers and dreambox internal readers. Default is checked

Pommfritz · 24. April 2017

Hi,
also die Easymäuse sind richtig eingestellt, da ja an der Fritzbox mit freetz alles funktioniert! Am Reader selbst (beim Raspi) sind die mhz und card mhz bei der Skykarte mit jeweils 357 mhz alles i.o. Die HD01 ist ja schon mal erkannt worden, die Skykarte noch nie. Beide Karten zusammen ergeben immer Error...

Bodo-1 · 24. April 2017

janni1 schrieb:
ich würde evtl. mal ein anderes Netzteil oder einen aktiven USB-Hub versuchen.

gelesen ?

Pommfritz · 25. April 2017

Die Lösung war der Hub! Jetzt werden beide Karten erkannt! Jetzt stimmt nur was mit der Config nicht von oscam...

Bodo-1 · 25. April 2017

Mehr Infos wären hilfreich .

Was steht denn im Log dazu ?

Gesendet von meinem ONE A2003 mit Tapatalk

Reader werden nicht erkannt

Pommfritz

Freak

axel

Pommfritz

Freak

axel

Pommfritz

Freak

axel

Pommfritz

Freak

czutok

Derek Buegel

dodo83

janni1

Pommfritz

Freak

Bodo-1

DEB König

Pommfritz

Freak

Bodo-1

DEB König

Ähnliche Themen

Reader werden nicht erkannt

Freak

Freak

Freak

Freak

Freak

DEB König

Freak

DEB König

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz