Reader off nach 2 tagen

laila-no1 · 24. September 2012

AW: Reader off nach 2 tagen

der fehlende Zeilenumbruch ist jetzt beim kopieren passiert oder ist das so gespeichert?

razorback · 24. September 2012

AW: Reader off nach 2 tagen

...anderer Ansatz:

hat Du den LoadBalancer aktiv ?

wenn ja, dann probier mal folgendes:
- wenn der Reader OFF geht, ins WebInterface, Configuration, Loadbalancer und dort (ganz unten) Clear Statistics.

Wenns dann wieder gehen sollte, dann liegts am Statistic Refresh.

R

starturk · 24. September 2012

AW: Reader off nach 2 tagen

Ist den so ein problem bekannt?

razorback · 24. September 2012

AW: Reader off nach 2 tagen

nun, es ist so:

wenn der LB aktiv ist, so führt er Statistiken.
bei jedem "TimeOut" bzw. "Not Found" wird der entsprechende Kanal für den entsprechenden Reader abgedreht, um sinnlose weitere Anfragen zu vermeiden.

Was ich mir vorstellen kann (VERMUTUNG !!) ist, daß wenn von dem Reader keine Kanäle mehr beantwortet werden, der ganze Reader auf "OFF" geht.

Du kannst das nur überprüfen, wie ich vorher schon angeregt habe, in so einem Fall über das WebIf die Statistiken zu resetten.

Wenn dann wieder alles auf ON geht, wissen wir, daß es genau das ist .

Wenn nicht, muß weiter geforscht werden.

In der oscam.conf gibt es 2 Parameter, die das Verhalten beeinflussen können:
lb_reopen_mode = 1 (fast reopen von gesperrten readern)
lb_stat_cleanup = Stunden (der default liegt bei 14 Tagen)

R

starturk · 25. September 2012

AW: Reader off nach 2 tagen

die beiden habe ich net in meiner config jetzt eben ist es wieder passiert reader 2 wieder off komisch.

accordce7 · 25. September 2012

AW: Reader off nach 2 tagen

schon mit dem passiven hub probiert?

laila-no1 · 25. September 2012

AW: Reader off nach 2 tagen

zeigst du uns bitte mal deine Oscam.config und oscam.server!

starturk · 25. September 2012

AW: Reader off nach 2 tagen

Hier bitte pasiv habe ich auch versucht geht nicht.

[global]logfile = /var/log/ipc/OScam.log
unlockparental = 1
nice = -1
preferlocalcards = 1
dropdups = 1
lb_mode = 1
lb_save = 100
lb_savepath = /tmp/.oscam/stat
failbantime = 360
failbancount = 3

[cccam]
port =
nodeid = F632BC99105B151C
version = 2.0.11
reshare = 1
stealth = 1

[webif]
httpport =
httpuser =
httppwd =
httphelplang = de
httprefresh = 10
httphideidleclients = 1
httpallowed = 0.0.0.0-255.255.255.255

jensebub · 25. September 2012

AW: Reader off nach 2 tagen

Hallo Starturk,
poste mal bitte die Ausgabe des Befehls: dmesg|grep usb
(bitte in

Code:

)

Gruß
jensebub

starturk · 25. September 2012

AW: Reader off nach 2 tagen

Hier bitte jetzt habe ich die mouse direkt an den server usb angeschlossen

root@server ~ > dmesg|grep usb[ 1.453517] usbcore: registered new interface driver usbfs
[ 1.453553] usbcore: registered new interface driver hub
[ 1.453590] usbcore: registered new device driver usb
[ 1.483556] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.483559] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.483563] usb usb1: Product: EHCI Host Controller
[ 1.483565] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.483568] usb usb1: SerialNumber: 0000:00:12.2
[ 1.483783] usb usb1: configuration #1 chosen from 1 choice
[ 1.497464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.497468] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.497471] usb usb2: Product: EHCI Host Controller
[ 1.497473] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.497476] usb usb2: SerialNumber: 0000:00:13.2
[ 1.503374] usb usb2: configuration #1 chosen from 1 choice
[ 1.515585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.515588] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.515591] usb usb3: Product: EHCI Host Controller
[ 1.515594] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 1.515596] usb usb3: SerialNumber: 0000:00:16.2
[ 1.515711] usb usb3: configuration #1 chosen from 1 choice
[ 1.619572] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.619578] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.619581] usb usb4: Product: OHCI Host Controller
[ 1.619583] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.619586] usb usb4: SerialNumber: 0000:00:12.0
[ 1.619714] usb usb4: configuration #1 chosen from 1 choice
[ 1.683631] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.683637] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.683640] usb usb5: Product: OHCI Host Controller
[ 1.683642] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.683645] usb usb5: SerialNumber: 0000:00:13.0
[ 1.683763] usb usb5: configuration #1 chosen from 1 choice
[ 1.743581] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.743586] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
[ 1.743589] usb usb6: Product: OHCI Host Controller
[ 1.743591] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.743594] usb usb6: SerialNumber: 0000:00:16.0
[ 1.743714] usb usb6: configuration #1 chosen from 1 choice
[ 2.604115] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.782690] usb 4-1: New USB device found, idVendor=0403, idProduct=6001
[ 2.782695] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.782699] usb 4-1: Product: FT232R USB UART
[ 2.782701] usb 4-1: Manufacturer: FTDI
[ 2.782703] usb 4-1: SerialNumber: AH01B9JO
[ 2.782814] usb 4-1: configuration #1 chosen from 1 choice
[ 3.052568] usb 4-2: new full speed USB device using ohci_hcd and address 3
[ 3.234691] usb 4-2: New USB device found, idVendor=0403, idProduct=6001
[ 3.234696] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.234700] usb 4-2: Product: FT232R USB UART
[ 3.234703] usb 4-2: Manufacturer: FTDI
[ 3.234705] usb 4-2: SerialNumber: AH01B602
[ 3.234824] usb 4-2: configuration #1 chosen from 1 choice
[ 3.512115] usb 4-3: new full speed USB device using ohci_hcd and address 4
[ 3.690695] usb 4-3: New USB device found, idVendor=0403, idProduct=6001
[ 3.690701] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.690704] usb 4-3: Product: FT232R USB UART
[ 3.690707] usb 4-3: Manufacturer: FTDI
[ 3.690709] usb 4-3: SerialNumber: AH01B3JY
[ 3.690839] usb 4-3: configuration #1 chosen from 1 choice
[ 3.960078] usb 4-4: new full speed USB device using ohci_hcd and address 5
[ 4.137700] usb 4-4: New USB device found, idVendor=0403, idProduct=6001
[ 4.137705] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.137709] usb 4-4: Product: FT232R USB UART
[ 4.137711] usb 4-4: Manufacturer: FTDI
[ 4.137714] usb 4-4: SerialNumber: AH01B9JU
[ 4.137836] usb 4-4: configuration #1 chosen from 1 choice
[ 4.173131] usbcore: registered new interface driver usbserial
[ 4.408116] usb 4-5: new full speed USB device using ohci_hcd and address 6
[ 4.586708] usb 4-5: New USB device found, idVendor=0403, idProduct=6001
[ 4.586713] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.586717] usb 4-5: Product: FT232R USB UART
[ 4.586719] usb 4-5: Manufacturer: FTDI
[ 4.586722] usb 4-5: SerialNumber: A900IM9E
[ 4.586853] usb 4-5: configuration #1 chosen from 1 choice
[ 4.856114] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 5.034277] usb 5-1: New USB device found, idVendor=0403, idProduct=6001
[ 5.034282] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.034285] usb 5-1: Product: FT232R USB UART
[ 5.034288] usb 5-1: Manufacturer: FTDI
[ 5.034290] usb 5-1: SerialNumber: A900KWGS
[ 5.034412] usb 5-1: configuration #1 chosen from 1 choice
[ 5.040479] usbcore: registered new interface driver usbserial_generic
[ 5.040484] usbserial: USB Serial Driver core
[ 5.049422] usb 4-1: Detected FT232RL
[ 5.049425] usb 4-1: Number of endpoints 2
[ 5.049428] usb 4-1: Endpoint 1 MaxPacketSize 64
[ 5.049431] usb 4-1: Endpoint 2 MaxPacketSize 64
[ 5.049433] usb 4-1: Setting MaxPacketSize 64
[ 5.049744] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 5.049812] usb 4-2: Detected FT232RL
[ 5.049815] usb 4-2: Number of endpoints 2
[ 5.049817] usb 4-2: Endpoint 1 MaxPacketSize 64
[ 5.049820] usb 4-2: Endpoint 2 MaxPacketSize 64
[ 5.049822] usb 4-2: Setting MaxPacketSize 64
[ 5.052283] usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 5.052333] usb 4-3: Detected FT232RL
[ 5.052335] usb 4-3: Number of endpoints 2
[ 5.052337] usb 4-3: Endpoint 1 MaxPacketSize 64
[ 5.052340] usb 4-3: Endpoint 2 MaxPacketSize 64
[ 5.052342] usb 4-3: Setting MaxPacketSize 64
[ 5.053738] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB2
[ 5.053790] usb 4-4: Detected FT232RL
[ 5.053793] usb 4-4: Number of endpoints 2
[ 5.053795] usb 4-4: Endpoint 1 MaxPacketSize 64
[ 5.053798] usb 4-4: Endpoint 2 MaxPacketSize 64
[ 5.053800] usb 4-4: Setting MaxPacketSize 64
[ 5.055903] usb 4-4: FTDI USB Serial Device converter now attached to ttyUSB3
[ 5.055960] usb 4-5: Detected FT232RL
[ 5.055962] usb 4-5: Number of endpoints 2
[ 5.055965] usb 4-5: Endpoint 1 MaxPacketSize 64
[ 5.055967] usb 4-5: Endpoint 2 MaxPacketSize 64
[ 5.055970] usb 4-5: Setting MaxPacketSize 64
[ 5.057754] usb 4-5: FTDI USB Serial Device converter now attached to ttyUSB4
[ 5.057812] usb 5-1: Detected FT232RL
[ 5.057815] usb 5-1: Number of endpoints 2
[ 5.057817] usb 5-1: Endpoint 1 MaxPacketSize 64
[ 5.057819] usb 5-1: Endpoint 2 MaxPacketSize 64
[ 5.057821] usb 5-1: Setting MaxPacketSize 64
[ 5.058246] usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB5
[ 5.058263] usbcore: registered new interface driver ftdi_sio

jensebub · 25. September 2012

AW: Reader off nach 2 tagen

Und wenn du nochmal den reader verlierst, machst du den Befehl nochmal und postest es bitte wieder.
Und bitte verspoiler so lange Befehlsausgaben, dann ist es für uns alle übersichtlicher

Ist deine Ausgabe komplett??? wieso sehe ich nur 6 Reader???

Gruß
jensebub

starturk · 25. September 2012

AW: Reader off nach 2 tagen

Wie soll ich es den aus dem putty rauskopieren es ist wieder passiert.

Der oscam log spukt das raus :

]2012/09/25 17:58:51 F09A70 r sky2 [mouse] ERROR: Phoenix_GetStatus: ioctl error in card detection 2012/09/25 17:58:51 F09A70 r sky2 [mouse] Error getting status of terminal.
2012/09/25 17:58:51 F09A70 r sky2 [mouse] WARNING: The reader was disabled because of too many errors

[/QUOTE]

[ 2.782701] usb 4-1: Manufacturer: FTDI[ 2.782703] usb 4-1: SerialNumber: AH01B9JO
[ 2.782814] usb 4-1: configuration #1 chosen from 1 choice
[ 3.052568] usb 4-2: new full speed USB device using ohci_hcd and address 3
[ 3.234691] usb 4-2: New USB device found, idVendor=0403, idProduct=6001
[ 3.234696] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.234700] usb 4-2: Product: FT232R USB UART
[ 3.234703] usb 4-2: Manufacturer: FTDI
[ 3.234705] usb 4-2: SerialNumber: AH01B602
[ 3.234824] usb 4-2: configuration #1 chosen from 1 choice
[ 3.512115] usb 4-3: new full speed USB device using ohci_hcd and address 4
[ 3.690695] usb 4-3: New USB device found, idVendor=0403, idProduct=6001
[ 3.690701] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.690704] usb 4-3: Product: FT232R USB UART
[ 3.690707] usb 4-3: Manufacturer: FTDI
[ 3.690709] usb 4-3: SerialNumber: AH01B3JY
[ 3.690839] usb 4-3: configuration #1 chosen from 1 choice
[ 3.960078] usb 4-4: new full speed USB device using ohci_hcd and address 5
[ 4.137700] usb 4-4: New USB device found, idVendor=0403, idProduct=6001
[ 4.137705] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.137709] usb 4-4: Product: FT232R USB UART
[ 4.137711] usb 4-4: Manufacturer: FTDI
[ 4.137714] usb 4-4: SerialNumber: AH01B9JU
[ 4.137836] usb 4-4: configuration #1 chosen from 1 choice
[ 4.173131] usbcore: registered new interface driver usbserial
[ 4.408116] usb 4-5: new full speed USB device using ohci_hcd and address 6
[ 4.586708] usb 4-5: New USB device found, idVendor=0403, idProduct=6001
[ 4.586713] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.586717] usb 4-5: Product: FT232R USB UART
[ 4.586719] usb 4-5: Manufacturer: FTDI
[ 4.586722] usb 4-5: SerialNumber: A900IM9E
[ 4.586853] usb 4-5: configuration #1 chosen from 1 choice
[ 4.856114] usb 5-1: new full speed USB device using ohci_hcd and address 2
[ 5.034277] usb 5-1: New USB device found, idVendor=0403, idProduct=6001
[ 5.034282] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.034285] usb 5-1: Product: FT232R USB UART
[ 5.034288] usb 5-1: Manufacturer: FTDI
[ 5.034290] usb 5-1: SerialNumber: A900KWGS
[ 5.034412] usb 5-1: configuration #1 chosen from 1 choice
[ 5.040479] usbcore: registered new interface driver usbserial_generic
[ 5.040484] usbserial: USB Serial Driver core
[ 5.049422] usb 4-1: Detected FT232RL
[ 5.049425] usb 4-1: Number of endpoints 2
[ 5.049428] usb 4-1: Endpoint 1 MaxPacketSize 64
[ 5.049431] usb 4-1: Endpoint 2 MaxPacketSize 64
[ 5.049433] usb 4-1: Setting MaxPacketSize 64
[ 5.049744] usb 4-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 5.049812] usb 4-2: Detected FT232RL
[ 5.049815] usb 4-2: Number of endpoints 2
[ 5.049817] usb 4-2: Endpoint 1 MaxPacketSize 64
[ 5.049820] usb 4-2: Endpoint 2 MaxPacketSize 64
[ 5.049822] usb 4-2: Setting MaxPacketSize 64
[ 5.052283] usb 4-2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 5.052333] usb 4-3: Detected FT232RL
[ 5.052335] usb 4-3: Number of endpoints 2
[ 5.052337] usb 4-3: Endpoint 1 MaxPacketSize 64
[ 5.052340] usb 4-3: Endpoint 2 MaxPacketSize 64
[ 5.052342] usb 4-3: Setting MaxPacketSize 64
[ 5.053738] usb 4-3: FTDI USB Serial Device converter now attached to ttyUSB2
[ 5.053790] usb 4-4: Detected FT232RL
[ 5.053793] usb 4-4: Number of endpoints 2
[ 5.053795] usb 4-4: Endpoint 1 MaxPacketSize 64
[ 5.053798] usb 4-4: Endpoint 2 MaxPacketSize 64
[ 5.053800] usb 4-4: Setting MaxPacketSize 64
[ 5.055903] usb 4-4: FTDI USB Serial Device converter now attached to ttyUSB3
[ 5.055960] usb 4-5: Detected FT232RL
[ 5.055962] usb 4-5: Number of endpoints 2
[ 5.055965] usb 4-5: Endpoint 1 MaxPacketSize 64
[ 5.055967] usb 4-5: Endpoint 2 MaxPacketSize 64
[ 5.055970] usb 4-5: Setting MaxPacketSize 64
[ 5.057754] usb 4-5: FTDI USB Serial Device converter now attached to ttyUSB4
[ 5.057812] usb 5-1: Detected FT232RL
[ 5.057815] usb 5-1: Number of endpoints 2
[ 5.057817] usb 5-1: Endpoint 1 MaxPacketSize 64
[ 5.057819] usb 5-1: Endpoint 2 MaxPacketSize 64
[ 5.057821] usb 5-1: Setting MaxPacketSize 64
[ 5.058246] usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB5
[ 5.058263] usbcore: registered new interface driver ftdi_sio
[20341.191537] usb 4-5: USB disconnect, address 6
[20343.089318] usb 5-1: USB disconnect, address 2
[20352.964619] usb 4-3: USB disconnect, address 4
[20354.303686] usb 4-4: USB disconnect, address 5
[20355.598708] usb 4-1: USB disconnect, address 2
[20356.448353] usb 4-2: USB disconnect, address 3
[20389.252117] usb 1-5: new high speed USB device using ehci_hcd and address 7
[20389.386012] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610
[20389.386017] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[20389.386021] usb 1-5: Product: USB2.0 Hub
[20389.386147] usb 1-5: configuration #1 chosen from 1 choice
[20389.660983] usb 1-5.1: new high speed USB device using ehci_hcd and address 8
[20389.754342] usb 1-5.1: New USB device found, idVendor=05e3, idProduct=0610
[20389.754347] usb 1-5.1: New USB device strings: Mfr=0, Product=1, SerialNumber =0
[20389.754350] usb 1-5.1: Product: USB2.0 Hub
[20389.754475] usb 1-5.1: configuration #1 chosen from 1 choice
[20389.829092] usb 1-5.2: new full speed USB device using ehci_hcd and address 9
[20389.927446] usb 1-5.2: New USB device found, idVendor=0403, idProduct=6001
[20389.927452] usb 1-5.2: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[20389.927455] usb 1-5.2: Product: FT232R USB UART
[20389.927458] usb 1-5.2: Manufacturer: FTDI
[20389.927460] usb 1-5.2: SerialNumber: AH01B9JO
[20389.927587] usb 1-5.2: configuration #1 chosen from 1 choice
[20389.930175] usb 1-5.2: Detected FT232RL
[20389.930178] usb 1-5.2: Number of endpoints 2
[20389.930180] usb 1-5.2: Endpoint 1 MaxPacketSize 64
[20389.930183] usb 1-5.2: Endpoint 2 MaxPacketSize 64
[20389.930185] usb 1-5.2: Setting MaxPacketSize 64
[20389.930529] usb 1-5.2: FTDI USB Serial Device converter now attached to ttyUS B6
[20390.004942] usb 1-5.3: new full speed USB device using ehci_hcd and address 1 0
[20390.103174] usb 1-5.3: New USB device found, idVendor=0403, idProduct=6001
[20390.103179] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[20390.103183] usb 1-5.3: Product: FT232R USB UART
[20390.103185] usb 1-5.3: Manufacturer: FTDI
[20390.103187] usb 1-5.3: SerialNumber: AH01B9JU
[20390.103313] usb 1-5.3: configuration #1 chosen from 1 choice
[20390.105903] usb 1-5.3: Detected FT232RL
[20390.105905] usb 1-5.3: Number of endpoints 2
[20390.105908] usb 1-5.3: Endpoint 1 MaxPacketSize 64
[20390.105910] usb 1-5.3: Endpoint 2 MaxPacketSize 64
[20390.105912] usb 1-5.3: Setting MaxPacketSize 64
[20390.106111] usb 1-5.3: FTDI USB Serial Device converter now attached to ttyUS B7
[20390.304644] usb 1-5.4: new full speed USB device using ehci_hcd and address 1 1
[20390.402637] usb 1-5.4: New USB device found, idVendor=0403, idProduct=6001
[20390.402642] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[20390.402646] usb 1-5.4: Product: FT232R USB UART
[20390.402648] usb 1-5.4: Manufacturer: FTDI
[20390.402650] usb 1-5.4: SerialNumber: A900KWGS
[20390.402776] usb 1-5.4: configuration #1 chosen from 1 choice
[20390.405364] usb 1-5.4: Detected FT232RL
[20390.405366] usb 1-5.4: Number of endpoints 2
[20390.405368] usb 1-5.4: Endpoint 1 MaxPacketSize 64
[20390.405371] usb 1-5.4: Endpoint 2 MaxPacketSize 64
[20390.405373] usb 1-5.4: Setting MaxPacketSize 64
[20390.405589] usb 1-5.4: FTDI USB Serial Device converter now attached to ttyUS B8
[20390.477010] usb 1-5.1.1: new full speed USB device using ehci_hcd and address 12
[20390.575366] usb 1-5.1.1: New USB device found, idVendor=0403, idProduct=6001
[20390.575372] usb 1-5.1.1: New USB device strings: Mfr=1, Product=2, SerialNumb er=3
[20390.575376] usb 1-5.1.1: Product: FT232R USB UART
[20390.575378] usb 1-5.1.1: Manufacturer: FTDI
[20390.575380] usb 1-5.1.1: SerialNumber: AH01B3XI
[20390.575508] usb 1-5.1.1: configuration #1 chosen from 1 choice
[20390.578098] usb 1-5.1.1: Detected FT232RL
[20390.578101] usb 1-5.1.1: Number of endpoints 2
[20390.578103] usb 1-5.1.1: Endpoint 1 MaxPacketSize 64
[20390.578106] usb 1-5.1.1: Endpoint 2 MaxPacketSize 64
[20390.578108] usb 1-5.1.1: Setting MaxPacketSize 64
[20390.578288] usb 1-5.1.1: FTDI USB Serial Device converter now attached to tty USB9
[20390.652856] usb 1-5.1.2: new full speed USB device using ehci_hcd and address 13
[20390.751091] usb 1-5.1.2: New USB device found, idVendor=0403, idProduct=6001
[20390.751096] usb 1-5.1.2: New USB device strings: Mfr=1, Product=2, SerialNumb er=3
[20390.751100] usb 1-5.1.2: Product: FT232R USB UART
[20390.751102] usb 1-5.1.2: Manufacturer: FTDI
[20390.751104] usb 1-5.1.2: SerialNumber: AH01B3JY
[20390.751233] usb 1-5.1.2: configuration #1 chosen from 1 choice
[20390.753827] usb 1-5.1.2: Detected FT232RL
[20390.753830] usb 1-5.1.2: Number of endpoints 2
[20390.753832] usb 1-5.1.2: Endpoint 1 MaxPacketSize 64
[20390.753835] usb 1-5.1.2: Endpoint 2 MaxPacketSize 64
[20390.753837] usb 1-5.1.2: Setting MaxPacketSize 64
[20390.754017] usb 1-5.1.2: FTDI USB Serial Device converter now attached to tty USB10
[20390.828467] usb 1-5.1.3: new full speed USB device using ehci_hcd and address 14
[20390.926947] usb 1-5.1.3: New USB device found, idVendor=0403, idProduct=6001
[20390.926953] usb 1-5.1.3: New USB device strings: Mfr=1, Product=2, SerialNumb er=3
[20390.926956] usb 1-5.1.3: Product: FT232R USB UART
[20390.926958] usb 1-5.1.3: Manufacturer: FTDI
[20390.926961] usb 1-5.1.3: SerialNumber: AH01B602
[20390.927089] usb 1-5.1.3: configuration #1 chosen from 1 choice
[20390.929807] usb 1-5.1.3: Detected FT232RL
[20390.929809] usb 1-5.1.3: Number of endpoints 2
[20390.929812] usb 1-5.1.3: Endpoint 1 MaxPacketSize 64
[20390.929814] usb 1-5.1.3: Endpoint 2 MaxPacketSize 64
[20390.929816] usb 1-5.1.3: Setting MaxPacketSize 64
[20390.930162] usb 1-5.1.3: FTDI USB Serial Device converter now attached to tty USB11
[20391.004442] usb 1-5.1.4: new full speed USB device using ehci_hcd and address 15
[20391.103425] usb 1-5.1.4: New USB device found, idVendor=0403, idProduct=6001
[20391.103431] usb 1-5.1.4: New USB device strings: Mfr=1, Product=2, SerialNumb er=3
[20391.103434] usb 1-5.1.4: Product: FT232R USB UART
[20391.103437] usb 1-5.1.4: Manufacturer: FTDI
[20391.103439] usb 1-5.1.4: SerialNumber: A900IM9E
[20391.103569] usb 1-5.1.4: configuration #1 chosen from 1 choice
[20391.106283] usb 1-5.1.4: Detected FT232RL
[20391.106286] usb 1-5.1.4: Number of endpoints 2
[20391.106288] usb 1-5.1.4: Endpoint 1 MaxPacketSize 64
[20391.106291] usb 1-5.1.4: Endpoint 2 MaxPacketSize 64
[20391.106293] usb 1-5.1.4: Setting MaxPacketSize 64
[20391.106478] usb 1-5.1.4: FTDI USB Serial Device converter now attached to tty USB12
[20869.567351] usb 1-5.4: USB disconnect, address 11
[20869.768326] usb 1-5.4: new full speed USB device using ehci_hcd and address 1 6
[20869.867937] usb 1-5.4: New USB device found, idVendor=0403, idProduct=6001
[20869.867942] usb 1-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber =3
[20869.867945] usb 1-5.4: Product: FT232R USB UART
[20869.867948] usb 1-5.4: Manufacturer: FTDI
[20869.867950] usb 1-5.4: SerialNumber: A900KWGS
[20869.868099] usb 1-5.4: configuration #1 chosen from 1 choice
[20869.871181] usb 1-5.4: Detected FT232RL
[20869.871183] usb 1-5.4: Number of endpoints 2
[20869.871186] usb 1-5.4: Endpoint 1 MaxPacketSize 64
[20869.871188] usb 1-5.4: Endpoint 2 MaxPacketSize 64
[20869.871190] usb 1-5.4: Setting MaxPacketSize 64
[20869.871524] usb 1-5.4: FTDI USB Serial Device converter now attached to ttyUS B0

Pilot · 25. September 2012

AW: Reader off nach 2 tagen

Hallo startuck,
2x habe ich deine Beiträge jetzt verspoilert. Mach das in Zukunft selbst.
bitte setz in Zukunft alles in spoiler:configs, logs, scripte: antworten, erweitert. Oben rechts im Menü findest du Spoiler. Damit werden deine Beiträge nicht so riesen lang.

Mlg piloten

Dakanta · 25. September 2012

AW: Reader off nach 2 tagen

Mal ne Frage, was für einen Hub empfehlt ihr denn?

Hatte nen Kaiser-Hub und der hat vorhin den Geist aufgegeben

Trollhunter · 25. September 2012

AW: Reader off nach 2 tagen

Hi,
den hier >>>

Sie müssen registriert sein, um Links zu sehen.

Reader off nach 2 tagen

laila-no1

razorback

Power Elite User

starturk

Super Elite User

razorback

Power Elite User

starturk

Super Elite User

accordce7

Meister

laila-no1

starturk

Super Elite User

jensebub

Stamm User

starturk

Super Elite User

jensebub

Stamm User

starturk

Super Elite User

Pilot

Dakanta

Ist oft hier

Trollhunter

Guest

Ähnliche Themen

Reader off nach 2 tagen

Power Elite User

Super Elite User

Power Elite User

Super Elite User

Meister

Super Elite User

Stamm User

Super Elite User

Stamm User

Super Elite User

Ist oft hier

Trollhunter

Guest

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz