Raspberry Neuling benötigt Hilfeschritte

[Derek Buegel]

AW: Raspberry Neuling benötigt Hilfeschritte

Spoiler

httpsavefullcfg = 0

Mach mal httpsavefullcfg = 0, das macht es übersichtlicher. Oscam neu starten.
Die Reader ist ausgeschaltet.

Spoiler

enable = 0

MfG

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

Erledigt

Spoiler

Oscam Conf
[global]
disablelog = 0
loghistorysize = 4096
serverip = 0.0.0.0
logfile = /var/log/ipc/OScam.log
logduplicatelines = 0
pidfile =
disableuserfile = 1
disablemail = 1
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
fallbacktimeout_percaid =
clientmaxidle = 120
bindwait = 120
netprio = 0
sleep = 0
unlockparental = 0
nice = 99
maxlogsize = 2480
waitforcards = 1
waitforcards_extra_delay = 500
preferlocalcards = 0
readerrestartseconds = 5
dropdups = 0
block_same_ip = 1
block_same_name = 1
usrfile =
mailfile =
cwlogdir =
emmlogdir = /var/log/ipc/
lb_mode = 0
lb_save = 0
lb_nbest_readers = 1
lb_nfb_readers = 1
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 30
lb_reopen_invalid = 1
lb_force_reopen_always = 0
lb_retrylimit = 0
lb_stat_cleanup = 336
lb_max_readers = 0
lb_auto_betatunnel = 1
lb_auto_betatunnel_mode = 0
lb_auto_betatunnel_prefer_beta= 50
lb_savepath =
lb_retrylimits =
lb_nbest_percaid =
lb_noproviderforcaid =
lb_auto_timeout = 0
lb_auto_timeout_p = 30
lb_auto_timeout_t = 300
double_check_caid =
ecmfmt =
resolvegethostbyname = 0
failbantime = 0
failbancount = 0
suppresscmd08 = 0
double_check = 0

[cache]
delay = 0
max_time = 15
max_hit_time = 15
wait_time =
cacheex_mode1_delay =
cacheexenablestats = 0
csp_port = 0
csp_serverip = 0.0.0.0
csp_ecm_filter =
csp_allow_request = 1
csp_allow_reforward = 0
cacheex_cw_check =
wait_until_ctimeout = 0
cwcycle_check_enable = 0
cwcycle_check_caid =
cwcycle_maxlist = 500
cwcycle_keeptime = 15
cwcycle_onbad = 1
cwcycle_dropold = 1
cwcycle_sensitive = 4
cwcycle_allowbadfromffb = 0
cwcycle_usecwcfromce = 0

[newcamd]
port = 22000@1830:003411
serverip = 0.0.0.0
allowed =
key = 0102030405060708091011121314
keepalive = 0
mgclient = 0

[cccam]
port = 123456
serverip = 0.0.0.0
nodeid = 3D6A104A10B713FC
version = 2.3.0
reshare = 10
reshare_mode = 4
ignorereshare = 0
forward_origin_card = 0
stealth = 0
updateinterval = 240
minimizecards = 0
keepconnected = 1
recv_timeout = 2000

[webif]
httpport = 16002
serverip = 0.0.0.0
httpuser = oscam
httppwd = oscam
httpcss =
httpjscript =
httpscript =
httptpl =
httppiconpath =
httphelplang = de
httplocale =
http_prepend_embedded_css = 0
httprefresh = 15
httppollrefresh = 60
httphideidleclients = 0
httphidetype =
httpshowpicons = 0
httppiconsize = 0
httpshowmeminfo = 0
httpshowuserinfo = 0
httpshowcacheexinfo = 0
httpshowecminfo = 0
httpshowloadinfo = 0
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 0
httpoverwritebakfile = 0
httpcert =
httpforcesslv3 = 0
httpdyndns =
aulow = 30
hideclient_to = 25
httposcamlabel = OSCam
httpemmuclean = 256
httpemmsclean = -1
httpemmgclean = -1
http_status_log = 0

Spoiler

Raspi Oscam Server
[reader]
label = HD+
description =
enable = 1
protocol = mouse
device = /dev/ttyUSB0
key =
password =
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
readnano =
services =
lb_whitelist_services =
reconnectdelay = 60000
resetcycle = 0
keepalive = 0
smargopatch = 0
autospeed = 1
sc8in1_dtrrts_patch = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
caid = 1843
atr =
boxid =
boxkey =
rsakey =
ins7e =
ins7e11 =
ins2e06 =
fix07 = 1
fix9993 = 0
readtiers = 1
force_irdeto = 0
needsemmfirst = 0
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 357
cardmhz = 357
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0
read_old_classes = 0

[reader]
label = camd3emu
description =
enable = 0
protocol = cs357x
device = 127.0.0.1,20248,0
key =
user = meinserver
password = meinserverpass
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
services =
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 30
reconnectdelay = 60000
keepalive = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
caid =
ecmnotfoundlimit = 0
ecmwhitelist =
ecmheaderwhitelist =
ident =
chid =
class =
aeskeys =
group = 1
emmcache = 0,1,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

[reader]
label = OSEmu
description =
enable = 0
protocol = camd35
device = 127.0.0.1,54321,0
key =
user = emu
password = emu
pincode = none
gbox_max_distance = 2
gbox_max_ecm_send = 3
gbox_reshare = 5
cccam_reshare = 5
services =
lb_whitelist_services =
inactivitytimeout = 0
reconnecttimeout = 30
reconnectdelay = 60000
keepalive = 0
fallback = 0
fallback_percaid =
localcards =
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 0
cacheex_drop_csp = 0
cacheex_allow_filter = 1
caid = 0D00,0D02,0D03,0D05,090F
ecmnotfoundlimit = 0
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ecmheaderwhitelist =
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
chid =
class =
aeskeys =
group = 1
emmcache = 0,1,0,0
blockemm-unknown = 0
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 100
lb_force_fallback = 0
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
cccreshare = -1
ccchop = 0
use_ssl = 0
audisabled = 0
auprovid =
ratelimitecm = 0
ratelimittime = 0
ecmunique = 0
srvidholdtime = 0
cooldown = 0,0

Spoiler

Pingu Oscam server
[reader]
label = v14
protocol = mouse
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
ndsversion = 2

[reader]
label = s02
protocol = mouse
device = /dev/sci0
caid = 1702
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

[reader]
label = HD+
enable = 1
protocol = mouse
device = 192.168.178.25,16002
caid = 1843
detect = cd
group = 1
emmcache = 1,3,2

[reader]
label = cccamproxy
enable = 0
protocol = cccam
device = seine.dyndns.com
user = user
password = pass
group = 1
cccversion = 2.3.0
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = Emulator
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
disablecrccws = 1

Leider immer noch Finster:-( muss ich beim Pingu mehrere Plugin einschalten? Bei mir sind zwei an mcas v1.0.4 und oscam 1.20

 

[Derek Buegel]

AW: Raspberry Neuling benötigt Hilfeschritte

Oscam neu gestartet?
Hast Du den rsa und boxkey rausgenommen (oscam.server) (Server)?

Spoiler

boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5

MfG

P.S. Bitte verwende Spoiler!

Spoiler

Du musst angemeldet sein, um Bilder zu sehen.

Editor erweitert

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

nein bei rsa und boxkey hab ich nichts gemacht. Muss da was rein? Sorry wenn ich sö blöde Fragen stelle bin noch relativ neu im CS gebit.

Ok jetzt hab ich gefunden wie das mit den Spoiler geht das wollte ich eigentlich die ganze zeit schon machen, Sorry.

 

[Derek Buegel]

AW: Raspberry Neuling benötigt Hilfeschritte

Hab ich Dir im ersten Spoiler #33 gepostet.

MfG

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

ok hab ich eingefügt, immer noch Dunkel. Ist dei Rot markierte Zeile richtig?

Spoiler

Pingu Oscam server
[reader]
label = v14
protocol = mouse
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
ndsversion = 2

[reader]
label = s02
protocol = mouse
device = /dev/sci0
caid = 1702
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

[reader]
label = HD+
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 1843
detect = cd
group = 1
emmcache = 1,3,2

[reader]
label = cccamproxy
enable = 0
protocol = cccam
device = seine.dyndns.com
user = user
password = pass
group = 1
cccversion = 2.3.0
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = Emulator
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
disablecrccws = 1

 

[Derek Buegel]

AW: Raspberry Neuling benötigt Hilfeschritte

Jedenfalls ist der Reader jetzt nicht mehr so "vollgemüllt".

Spoiler

[reader]
label                         = HD01
protocol                      = mouse
device                        = /dev/ttyUSB0
services                      = hdplus
caid                          = 1830
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect                        = cd
mhz                           = 600
cardmhz                       = 368
ident                         = 1843:000000,003411,008011
group                         = 1
emmcache                      = 1,3,2,0

Mouseeinstellungen: unten, unten, oben, oben
https://www.digital-eliteboard.com/224793-smartmouse-easymouse-2-konfigurationen.html
Hast Du IPC? Dann setze UDEV-Ules IPC-Web-If System - Manager
Dann spielt der USB tty*** keine Rolle mehr.

MfG

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

Ja ich hab IPC, die Einstellung dafür und die der Eseymouse mache ich heute ab Abend gleich nach der Arbeit.
Danke Derek das du dir für mich und meinem problem zeit nimmst!!

Schöne Grüße

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

Hallo Derek,

hab die Easymouse nach der beschreibung deines link eingerichtet nach der ist bei der HD+02 die ersten drei schalter unten der vierte dürfte dann keine rolle mehr spielen.

hab versucht im Web-If UDEV zu setzen hab nur nicht gefunden wie das geht :-( So sieht das bei mir aus was muss ich da machen? kann man hier ein Bild einstellen?

Schöne Grüße

 

[Derek Buegel]

AW: Raspberry Neuling benötigt Hilfeschritte

Hier vergibst Du einen Namen. Z.B. HD_Plus

Du musst angemeldet sein, um Bilder zu sehen.

Drückst auf Change und vergibst diesen Namen in der oscam.server als device

Spoiler

[reader]
label                         = HD01
protocol                      = mouse
[COLOR=#ff0000]device                        = /dev/HD_Plus[/COLOR]
services                      = hdplus
caid                          = 1830
boxkey                        = A7642F57BC96D37C
rsakey                        = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
detect                        = cd
mhz                           = 600
cardmhz                       = 368
ident                         = 1843:000000,003411,008011
group                         = 1
emmcache                      = 1,3,2,0

Hannst natürlich auch jeden anderen Namen nehmen, würde aber auf Sonderzeichen, Leerzeichen verzichten.

MfG

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

Erledigt. UDEV gesetzt und im server eingetragen. Irgendetwas passt da noch nicht.

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

Hallo DEB Spezialisten,

brauche bitte euere hilfe bekomme es einfach nicht hell meine HD+02.

bei meinem Pingu Client wird immer folgendes im Live Log angezeigt:

Spoiler

• 2000/01/01 00:14:08 0 --- Skipped 3 duplicated log lines ---
• 2000/01/01 00:14:08 57A8B0 r HD+ [mouse] ERROR: Opening device
  Sie müssen registriert sein, um Links zu sehen.
  .... (errno=2 No such file or directory)
• 2000/01/01 00:14:08 57A8B0 r HD+ [mouse] Cannot open device:
  Sie müssen registriert sein, um Links zu sehen.
  ....
• 2000/01/01 00:14:33 57CB70 p cccamproxy configuration error!

was hat das zu bedeuten?

Schöne Grüße

 

[dodo83]

AW: Raspberry Neuling benötigt Hilfeschritte

das dein Proxy Reader falsch Konfiguriert ist am Pingu

• 2000/01/01 00:14:33 57CB70 p cccamproxy configuration error!

das MOUSE Protocol wird wohl falsch dafür sein
Poste mal die Configs

 

[bullibull]

AW: Raspberry Neuling benötigt Hilfeschritte

Guten Morgen DEB Forum,

sorry war Gestern schon so frustriert:emoticon-0106-cryin und war deshalb schon offline. Irgendwie bin ich zu blöd das selbständig zum laufen zu bekommen.

Hier mal meine Pingu Konfiguraton:

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9842
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
loghistorysize = 1024
logfile = /var/log//oscam/oscam.log
nice = -1
maxlogsize = 1024
ecmfmt = c&p/i/s/l

[cache]

[cccam]
port = 57920
nodeid = BD13D47710B71516
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

[webif]
httpport = 8888
httphelplang = de
httprefresh = 10
httpallowed = 192.168.1.1-192.168.255.255

Spoiler

# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9842
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[account]
disabled = 1
user = lokal
au = 1
betatunnel = 1833.FFFF:1702
group = 1

[account] wo dieser eintrag auf einmal herkommt weiß ich auch nicht!???
disabled = 1
user = anonymous
group = 1

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9842
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = v14
enable = 0
protocol = mouse
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
ndsversion = 2

[reader]
label = s02
enable = 0
protocol = mouse
device = /dev/sci0
caid = 1702
boxkey = 1122334455667788
force_irdeto = 1
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1

[reader]
label = HD+
protocol = cccam
device =

Sie müssen registriert sein, um Links zu sehen.

.... wo finde ich was hier rein muss???
user = cccam wo finde ich was hier rein muss???
password = cccam wo finde ich was hier rein muss???
caid = 1843
detect = cd
group = 1
emmcache = 1,3,2

[reader]
label = cccamproxy
protocol = mouse
device = 192.... wo finde ich was hier rein muss???
user = cccam wo finde ich was hier rein muss???
password = cccam wo finde ich was hier rein muss???
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
cccmaxhops = 3
ccckeepalive = 1

[reader]
label = Emulator
enable = 0
protocol = emu
device = Emulator
caid = 0D00&0F00,090F,0500,1801,0604,1843
detect = cd
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;0D03:000000,000004,000008,000024,000028;0D05:000000,000004,000010;090F:000000;0500:030B00,023800,021110,007400,007800;1801:000000;0604:000000
group = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64
disablecrccws = 1

Spoiler

Oscam.dvbapi
P: 0D05
P: 098C
P: 1843
I: 0

zu alllem überfluss sind jetzt auch noch einige Konfigurationen bei meinem Raspberry Oscam Server weg ich könnte echt Kotzen weiß da gar nicht mehr was ich da mittlerweile alles eingestellt habe:emoticon-0179-headb:emoticon-0106-cryin .

Vielleicht kann mich nochmal jemand unterstützen bitte?
PS: Komm mir schon richtig blöd vor

Schöne Grüße

 

[dodo83]

AW: Raspberry Neuling benötigt Hilfeschritte

der kann RAUS

[COLOR=#333333][account] [/COLOR][COLOR=#ff0000]wo dieser eintrag auf einmal herkommt weiß ich auch nicht[/COLOR][COLOR=#ff0000]!???[/COLOR]
[COLOR=#333333]disabled = 1[/COLOR]
[COLOR=#333333]user = anonymous[/COLOR]
[COLOR=#333333]group = 1[/COLOR]

du brauchst auch nur einen Proxy Reader zum verbinden auf den Server

[COLOR=#000000][reader]
label = cccamproxy
protocol = cccam [/COLOR][COLOR=#ff0000]<- als Protocol muss CCCAM drin stehen[/COLOR][COLOR=#000000]
device = 192.168.178.55,12000 [/COLOR][COLOR=#ff0000]<- BEISPIEL, die IP deines Server und der Port aus der oscam.conf des Servers, kein http// oder ähnliches vor der IP[/COLOR][COLOR=#000000]
user = cccam [/COLOR][COLOR=#ff0000]<- hier kommt der User welcher auf dem Server dazu eingerichtet ist[/COLOR][COLOR=#000000]
password = cccam [/COLOR][COLOR=#ff0000]<- hier das Passwort für den User welches am Server dazu eingetragen ist[/COLOR][COLOR=#000000]
inactivitytimeout = 30
group = 1
cccversion = 2.3.0
cccmaxhops = 3
ccckeepalive = 1[/COLOR]