Problem mit der V14

[Bobbybest]

Hallo zusammen,

ich bekomme die neue V14 Karte bei mir nicht zum laufen. Anleitungen aus dem Board soweit befolgt, aber bekomme immer noch "needs pairing" Meldung.

oscam.server

Spoiler

[reader]
label = v14
description = sky
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
ident = 098C:000000
group = 1
emmcache = 1,1,2,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
cccreshare = 0
ndsversion = 2

log

Spoiler

• 2015/06/18 12:06:01 77500468 h (reader) v14 [videoguard2] creating thread for device /dev/sci0
• 2015/06/18 12:06:01 591BA0 r (reader) v14 [videoguard2] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz)
• 2015/06/18 12:06:01 591BA0 r (reader) v14 [videoguard2] Reader sci internal, detected box type: vusolose
• 2015/06/18 12:06:01 591BA0 r (reader) v14 [videoguard2] card detected
• 2015/06/18 12:06:01 591BA0 r (reader) v14 [videoguard2] cardreader_do_checkhealth: reader->card_status = 1, ret = 0
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] ATR historicalbytes should be: 13
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Fetching global interface characters for protocol T0
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TA1: 15
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Advertised max cardfrequency is 5.00 (Fmax), frequency divider is 372 (Fi)
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Bitrate adjustment is 16 (D)
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Work ETU = 4.65 us assuming card runs at 5.00 Mhz
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Initial ETU = 74.40 us
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TB1: 25
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TC1: 02
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Extra guardtime of 2 ETU (N)
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TD1 50
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Fetching global interface characters for protocol T0:
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TA2: 80
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Switching between negotiable mode and specific mode is not possible
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Transmission parameters explicitly defined in the interface characters.
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TC2: 0F
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Protocol T0: work wait time is 230400 work etu (WWT)
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Total ATR Length including 13 historical bytes should be 21
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Total protocols in this ATR is 1
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TA1=15 TB1=25 TC1=02 TD1=50 (T0)
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] TA2=80 TC2=0F no TD2 means T0
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] 1 protocol types detected. Historical bytes: 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Specific mode: T0, F=372, D=16, N=2
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Calculated work ETU is 5.17 us reader mhz = 450
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Protocol: T=0, WWT=230400, Clockrate=4500000
• 2015/06/18 12:06:02 591BA0 r (reader) v14 [internal] Setting timings: timeout=230400 ETU, block_delay=0 ETU, char_delay=14 ETU
• 2015/06/18 12:06:02 58FB50 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/06/18 12:06:05 591BA0 r (reader) v14 [internal] Buffers readed 0 bytes total time_us 3100978
• 2015/06/18 12:06:05 591BA0 r (reader) v14 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->mhz)
• 2015/06/18 12:06:05 58FB50 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 03 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 04 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 04 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 05 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 05 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 06 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 06 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 07 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 07 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 08 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 08 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 09 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 09 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 0A 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 39 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 0A 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] write to cardreader
• 2015/06/18 12:06:07 591BA0 r (reader) D1 70 0B 00 26
• 2015/06/18 12:06:07 591BA0 r (reader) D3 54 00 00 5E
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Answer from cardreader:
• 2015/06/18 12:06:07 591BA0 r (reader) 99 A9 85 D1 2B 68 AE F8 22 32 34 AB 67 64 93 44
• 2015/06/18 12:06:07 591BA0 r (reader) CD BB 7F 87 1C 1B 80 E0 69 38 6C 24 F6 3D E2 4D
• 2015/06/18 12:06:07 591BA0 r (reader) 82 F2 13 25 5C 24 5C FB 9E 94 22 90 8B CC 23 0F
• 2015/06/18 12:06:07 591BA0 r (reader) C7 04 8F FC 2E 4A CE D1 98 1F E3 FE C3 62 4F 2B
• 2015/06/18 12:06:07 591BA0 r (reader) 75 F6 EB A4 D8 BF 73 12 FB 2C 0E A4 7B 2F 0D D1
• 2015/06/18 12:06:07 591BA0 r (reader) 1F 90 CD C4 EF EC F2 4E 68 AF 36 1F C7 25 90 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Decrypted payload
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 CA 00 00 22 02
• 2015/06/18 12:06:07 591BA0 r (reader) 00 80 0E 02 00 00 0F 06 00 10 00 00 00 0A 20 04
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 25 11 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 2A 04 00 CA 00 00 55 01 20
• 2015/06/18 12:06:07 591BA0 r (reader) 56 08 00 00 00 00 00 00 00 00 2B 02 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] cardreader_do_ecm: after csystem->do_ecm rc=0
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] cardreader_do_ecm: ret rc=0
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] cardreader_process_ecm: cardreader_do_ecm returned rc=0 (ERROR=0)
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Error processing ecm for caid 098C, srvid 0083, servicename: 098C:0083 unknown
• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] ecm hash: C3E4EF56046D7631A789CAA38B656D18 real time: 75 ms
• 2015/06/18 12:06:07 58FB50 c (ecm) dvbapiau (098C&000000/025B/0083/98:C3E4EF56046D7631A789CAA38B656D18): not found (78 ms) by v14
• 2015/06/18 12:06:07 58FB50 c (ecm) cw:
• 2015/06/18 12:06:07 58FB50 c (ecm) 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Kann einer da noch einen Fehler sehen?

 

[JF2707]

AW: Problem mit der V14

Hallo,

ich bin zwar kein OSCAM Spezialist, aber die die Dir helfen können brauchen sicher noch deine:
-Oscam.config
-Oscam.user

Gruß und viel Erfolg

 

[stappoe]

AW: Problem mit der V14

Also ich würde die ident schonmal raus nehmen.
Welche emms hast Du denn bislang bekommen bzw geschrieben?

 

[dodo83]

AW: Problem mit der V14

die Karte ist gepaird laut Payload

• 2015/06/18 12:06:07 591BA0 r (reader) v14 [videoguard2] Decrypted payload
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 00 00 00 00 CA 00 00 22 02
• 2015/06/18 12:06:07 591BA0 r (reader) 00 80 0E 02 00 00 0F 06 00 10 00 00 00 0A 20 04
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 25 11 00 00 00 00 00 00 00 00 00 00
• 2015/06/18 12:06:07 591BA0 r (reader) 00 00 00 00 00 00 00 2A 04 00 CA 00 00 55 01 20
• 2015/06/18 12:06:07 591BA0 r (reader) 56 08 00 00 00 00 00 00 00 00 2B 02 00 00

 

[prangsta]

AW: Problem mit der V14

Hast recht dodo !
Das hab ich übersehen - schande über mich !

 

[heza]

AW: Problem mit der V14

jetzt würde sich die Frage stellen - warum?
geblockt ist ja alles...

@Bobbybest was hast du genau mit der Karte gemacht?

 

[JF2707]

AW: Problem mit der V14

er wird höchstwahrscheinlich was falsches auf die Karte geschrieben haben oder mal kurz ne andere Softcam am laufen gehabt.
Aber er wird sich nochmal melden und Stellung beziehen.

Gruß

 

[Bobbybest]

AW: Problem mit der V14

Es kann tatsächlich sein, dass ich die Karte anderweitig aktiviert habe.