Problem HD02 und ProtoLux v2

[hadopox]

Hallo,

ich bekomme meine HD02 Karte nicht zum laufen. Die Karte war bis vor ein paar Tagen in meiner fritz aktiv. Allerdings hat sie keine AU bekommen und ist jetzt offensichtlich dunkel.
Jetzt habe ich mir Protolux v2 installiert und dieses PlugIn gemäß Anleitung instaliert: Link ist nicht mehr aktiv..

Hier das Log File:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sun Feb 10 12:09:11 2013
-------------------------------------------------------------------------------
2013/02/10 12:09:11 296A1000 s >> OSCam << cardserver started, version 1.10rc-svn, build #5705 (sh4-amino-linux)
2013/02/10 12:09:11 296A1000 s version=1.10rc-svn, build #5705, system=sh4-amino-linux, nice=-1
2013/02/10 12:09:11 296A1000 s client max. idle=120 sec, debug level=0
2013/02/10 12:09:11 296A1000 s max. logsize=500 Kb, loghistorysize=4096 bytes
2013/02/10 12:09:11 296A1000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2013/02/10 12:09:11 296A1000 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2013/02/10 12:09:11 296A1000 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2013/02/10 12:09:11 296A1000 s signal handling initialized (type=sysv)
2013/02/10 12:09:11 296A1000 s 210 service-id's loaded in 5ms
2013/02/10 12:09:11 296A1000 s can't open file "/var/keys/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2013/02/10 12:09:11 296A1000 s can't open file "/var/keys/oscam.provid" (err=2 No such file or directory), no provids's loaded
2013/02/10 12:09:11 296A1000 s can't open file "/var/keys/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2013/02/10 12:09:11 296A1000 s monitor: disabled
2013/02/10 12:09:11 296A1000 s camd33: disabled
2013/02/10 12:09:11 296A1000 s camd35: disabled
2013/02/10 12:09:11 296A1000 s cs378x: disabled
2013/02/10 12:09:11 296A1000 s newcamd: disabled
2013/02/10 12:09:11 296A1000 s radegast: disabled
2013/02/10 12:09:11 2A7144E8 h HTTP Server listening on port 8888
2013/02/10 12:09:11 296A1000 s http thread started
2013/02/10 12:09:11 296A1000 s creating thread for device /dev/sci0
2013/02/10 12:09:11 2AF144E8 r reader thread started (thread=2AF144E8, label=reader, device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2013/02/10 12:09:11 296A1000 s waiting for local card init
2013/02/10 12:09:11 2AF144E8 r reader card detected
2013/02/10 12:09:18 2AF144E8 r ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2013/02/10 12:09:20 2AF144E8 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.68 Mhz
2013/02/10 12:09:21 2AF144E8 r detect native nagra card
2013/02/10 12:09:21 2AF144E8 r [nagra-reader] type: NAGRA, caid: 1843, IRD ID: FF FF FF FF
2013/02/10 12:09:21 2AF144E8 r [nagra-reader] ProviderID: 00 00 34 11
2013/02/10 12:09:21 2AF144E8 r [nagra-reader] active to: 2013/01/30 11:59
2013/02/10 12:09:22 2AF144E8 r -----------------------------------------
2013/02/10 12:09:22 2AF144E8 r |id |tier |valid from |valid to |
2013/02/10 12:09:22 2AF144E8 r +----+--------+------------+------------+
2013/02/10 12:09:22 2AF144E8 r |8011|0066 |2012/10/25 |2013/10/26 |
2013/02/10 12:09:22 2AF144E8 r |8011|0067 |2010/01/19 |2010/01/20 |
2013/02/10 12:09:22 2AF144E8 r -----------------------------------------
2013/02/10 12:09:23 2AF144E8 r found cardsystem nagra
2013/02/10 12:09:23 2AF144E8 r ROM: D N A S P 1 8 0
2013/02/10 12:09:23 2AF144E8 r REV: M e r 0 0 0
2013/02/10 12:09:23 2AF144E8 r SER: 49 21 56 39
2013/02/10 12:09:23 2AF144E8 r CAID: 1843
2013/02/10 12:09:23 2AF144E8 r Prv.ID: 00 00 34 11 (sysid)
2013/02/10 12:09:23 2AF144E8 r Prv.ID: 00 00 00 00
2013/02/10 12:09:23 2AF144E8 r Prv.ID: 00 00 80 11
2013/02/10 12:09:23 2AF144E8 r [nagra-reader] ready for requests
2013/02/10 12:09:23 296A1000 s init for all local cards done
2013/02/10 12:09:23 296A1000 s anti cascading disabled
2013/02/10 12:09:23 2BF154E8 c plain dvbapi-client granted (ines, au=auto (1 reader))
2013/02/10 12:09:23 2BF154E8 c dvbapi: 4 entries read from oscam.dvbapi
2013/02/10 12:09:26 2BF154E8 c dvbapi: [ADD PID 0] CAID: 1830 ECM_PID: 1CCC PROVID: 000000
2013/02/10 12:09:26 2BF154E8 c dvbapi: [ADD PID 1] CAID: 1843 ECM_PID: 19CC PROVID: 000000
2013/02/10 12:09:26 2BF154E8 c dvbapi: [ADD PID 2] CAID: 09C4 ECM_PID: 1BCC PROVID: 000000
2013/02/10 12:09:26 2BF154E8 c dvbapi: [ADD PID 3] CAID: 098C ECM_PID: 1ACC PROVID: 000000
2013/02/10 12:09:26 2BF154E8 c dvbapi: [ADD PID 4] CAID: 1860 ECM_PID: 1ECC PROVID: 000000
2013/02/10 12:09:26 2BF154E8 c dvbapi: new program number: EF10 (RTL HD)
2013/02/10 12:09:26 2BF154E8 c ines (1830&000000/EF10/92:8F9E): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1830)
2013/02/10 12:09:27 2AF144E8 r Error processing ecm for caid 1843, srvid EF10 (servicename: RTL HD) on reader reader.
2013/02/10 12:09:27 2BF154E8 c housekeeping lb stats thread started
2013/02/10 12:09:27 2BF154E8 c ines (1843&000000/EF10/89:0601): not found (352 ms) by reader (of 1 avail 1)
2013/02/10 12:09:27 2BF154E8 c ines (09C4&000000/EF10/B3:7561): rejected caid (0 ms) (of 0 avail 0) (invalid caid 9c4)
2013/02/10 12:09:27 2BF154E8 c ines (098C&000000/EF10/98:7AC8): rejected caid (0 ms) (of 0 avail 0) (invalid caid 98c)
2013/02/10 12:09:27 2BF154E8 c dvbapi: try pids again #1
2013/02/10 12:09:27 2BF154E8 c ines (1860&000000/EF10/8F4B3): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1860)
2013/02/10 12:09:27 2BF154E8 c ines (1830&000000/EF10/92:8F9E): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1830)
2013/02/10 12:09:28 2BF154E8 c ines (1843&000000/EF10/89:0601): not found (0 ms) by reader (of 1 avail 1)
2013/02/10 12:09:28 2BF154E8 c ines (09C4&000000/EF10/B3:7561): rejected caid (0 ms) (of 0 avail 0) (invalid caid 9c4)
2013/02/10 12:09:28 2BF154E8 c ines (098C&000000/EF10/98:7AC8): rejected caid (0 ms) (of 0 avail 0) (invalid caid 98c)
2013/02/10 12:09:28 2BF154E8 c dvbapi: try pids again #2
2013/02/10 12:09:28 2BF154E8 c ines (1860&000000/EF10/8F4B3): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1860)
2013/02/10 12:09:28 2BF154E8 c ines (1830&000000/EF10/92:8F9E): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1830)
2013/02/10 12:09:29 2BF154E8 c ines (1843&000000/EF10/89:0601): not found (0 ms) by reader (of 1 avail 1)
2013/02/10 12:09:29 2BF154E8 c ines (09C4&000000/EF10/B3:7561): rejected caid (0 ms) (of 0 avail 0) (invalid caid 9c4)
2013/02/10 12:09:29 2BF154E8 c ines (098C&000000/EF10/98:7AC8): rejected caid (0 ms) (of 0 avail 0) (invalid caid 98c)
2013/02/10 12:09:29 2BF154E8 c dvbapi: try pids again #3
2013/02/10 12:09:29 2BF154E8 c dvbapi: can't decode channel
2013/02/10 12:09:29 2BF154E8 c ines (1860&000000/EF10/8F4B3): rejected caid (0 ms) (of 0 avail 0) (invalid caid 1860)

meine oscam.config:

Spoiler

[global]
logfile = /var/keys/oscam.log
fallbacktimeout = 2500
clientmaxidle = 120
nice = -1
serialreadertimeout = 1500
maxlogsize = 500
preferlocalcards = 1
saveinithistory = 1
readerrestartseconds = 5
lb_mode = 1
lb_save = 500
lb_savepath = /tmp/.oscam/stat
lb_nbest_readers = 1
lb_nfb_readers = 3
lb_min_ecmcount = 5
lb_max_ecmcount = 500
lb_reopen_seconds = 900
lb_retrylimit = 800
lb_stat_cleanup = 336
lb_use_locking = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines
pmt_mode = 1
request_mode = 0
P: 1702 1
P: 1843 1
I: 1843,1702,


[webif]
httpport = 8888
httphelplang = de
httpuser = ines
httppwd = pass
httprefresh = 1
httpallowed = 127.0.0.1,192.168.1.1-192.168.254.254,10.0.0.1-10.0.254.254
httphideidleclients = 1
httpsavefullcfg = 1

oscam.dvbapi:

Spoiler

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = ines
pmt_mode = 1
request_mode = 0
P: 1702 1
P: 1843 1
I: 1843,1702,

oscam.server:

Spoiler

[reader]
label = reader
enable = 1
protocol = internal
device = /dev/sci0
services = hdplus
caid = 1843
boxid = 12345678
rsakey= BF...D5
boxkey = A7...7C
detect = cd
mhz = 368
cardmhz = 368
ident = 0000:000000,003411,008011
group = 1
emmcache = 1,2,3
lb_weight = 100

oscam.services:

Spoiler

# oscam.services generated automatically by Streamboard OSCAM 0.99.4svn build #2900
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[hdplus]
caid = 1843
srvid = EF10,EF11,EF14,EF15,EF74,EF75,EF76,EF77,277E,5273, 5274

oscam.user:

Spoiler

[account]
user = ines
pwd = pass
group = 1
monlevel = 4
au = 1
services = hdplus
caid = 1843
ident = 0000:000000,003411,008011
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
keepalive = 1
#### accoints für Clienten
[account]
user = user1
pwd = pass1
group = 1
monlevel = 4
au = 1
services = hdplus
caid = 1843
ident = 0000:000000,003411,008011
chid = 0604:000014,000069,0000F4,0000F5,0000FA
suppresscmd08 = 0
cccmaxhops = 3
cccreshare = 1
keepalive = 1

Ich hoffe mir kann einer helfen

Gruß,
hadopox

 

[Alex]

AW: Problem HD02 und ProtoLux v2

In der oscam.conf sollte unter [dvbapi] nur folgendes stehen:

Spoiler

[dvbapi]
 enabled = 1
 au = 1
 boxtype = dreambox
 user = ines 
 pmt_mode = 1
 request_mode = 0

In der oscam.dvbapi sollte es so ausschauen:

Spoiler

P: 1843 1
P: 1702
I: 0

 

[hadopox]

AW: Problem HD02 und ProtoLux v2

Super! Vielen dank, jetzt klappt es.
Was muss ich denn im Oscam des Receivers und der fritz einstellen, dass das AU funktioniert?

Gruß,
hadopox

 

[Alex]

AW: Problem HD02 und ProtoLux v2

Beim der Fritzbox unte oscam.user bei dem User, der updaten soll AU = 1