Power of Dreams HD+ 2.0.5 (POD HD+) CrossEPG Edition for Vu+ Duo

13-10-2011

Changes:

Update the image at the official image 6.0

Open Embedded
- Add WebBrowser plugin(Duo needs a bootloader update)
- Add UI postion control plugin
- Add 3D framebuffer control plugin
- Add remote control system code control plugin

- For details, please take a loot at git log.

Driver update

20111006
- improve DVB-C/T tuning(uno)
- Fix incorrect display of DVB-C/T SNR/AGC(uno)
- Fix high-bitrate problem in CI(uno, needs a FPGA update, New Rev 4.2 FPGA image is at )
- Support 3D framebuffer
- Add interface for UI position setup
- Add redundant fpga device at /dev (uno)
- Add ioctl for hdmi_cec(get physical/logical addr.)
- Fix audo mute in pass-through(uno)
- Add interface to set the system code of the remote control(uno)
- Add interface to disable REC VFD icon(uno,duo)
- Add interface to control global alpha

WARNING: user POD HD with DUO

From the next version of the POD HD, you MUST use a new bootloader. To do this:

-Download the
- Unzip attached file
- Format USB flash drive in with fat
- Create directory /vuplus/duo at flash drive
- Copy file to directoy /vuplus/duo at flash drive
- Shutdown VU+ STB
- Disconnect all USB devices
- Connect USB flash drive to VU+ STB
- Power on VU+ STB
- Wait for message "Please remove USB" at VFD
- Disconnect USB flash drive
- Power off VU+ STB
- Flash new image

- Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update

Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
Note 2: this is only for the duo, not solo or unos

Sie müssen registriert sein, um Links zu sehen.

​

14/10/2011

We are pleased to offer for POD HD + Vuplus Duo, Solo Uno and now in version 2.0.6.

- Based on the generation '6 'official images
- Requires an update of the bootloader on Duo

Main new feature:
- Added a web browser plugin (except solo)
- Added a plugin for precise placement of the UI to fit your HDTV (overscan ... Wink
- Added a plugin for managing 3D menus

20111006
- Improve DVB-C / T tuning (uno)
- Fix incorrect display of DVB-C / T SNR / AGC (uno)
- Fix problem in high-bitrate CI
- Support 3D framebuffer
- Add UI interface for setup position
- Add redundant FPGA device at / dev (uno)
- Add ioctl for hdmi_cec (get physical / logical addr.)
- Fix mute Audo in pass-through (uno)
- Add interface to set the system code of the remote control (uno)
- Add interface to disable REC icon VFD (uno, duo)
- Add interface to control the overall alpha

Please note, the transition from 2.0.5 to 2.0.6 can be done by re-flashing your set top box, no updates online possible.

WARNING: user POD HD with DUO

From the next version of the POD HD, you MUST use a new bootloader. To do this:
- Download the bootloader:
- Unzip the contents of the key to obtain the following chemain: / vuplus / duo / cfe_cfe_auto.bin
- Turn off the duo
- Put the stick in the duo's post
- Turn the duo
- The update is very fast and as "Finished .. reboot" appears, you can remove the key and restart the duo
- Attention: clear out the file / vuplus / duo / cfe_cfe_auto.bin of the key with a successful update

Note 1: This operation does not update the bootloader, not the image you to update online or with a normal flash
Note 2: this is only for the duo, not solo or unos




​