Hallo
Ich habe CCcam 2.1.3/Newcs_1.67 am laufen.
Ich kriege das aber mit configs nicht hin. Irgendwann sind so durcheinander durch probieren mal mit Mpcs dann wiederrum mit Radegast und schlesslich mit Oscam, das ich alles wieder neu machen muss.
Jetzt habe ich nur Newcs.xml mit eingetragene Box und Rsa key.
Hier mein newcs log falls dir das was bringt
**************************
* *
* The Gemini Project *
* *
**************************
OpenDreambox 4.5.0
dm800
dm800 login: root
Password:
Login incorrect
dm800 login: root
Password:
root@
dm800:~# /usr/bin/newcs_1.67
This is NewCS 1.67 RC1 [Build: 95] - the New CardServer by the Butter-team..
Compiled on Jul 14 2009 at 11:56:53
Reading Config file from /var/tuxbox/config/newcs.xml
TCP-log password is disabled!
level: normal
type: general
output: console,tcp
logger config: level 1 type 1 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 13:55:12 ] [ Box detect ] Box type 7 (Dream Multimedia (MIPS) HD Box)
[ 13:55:12 ] [ Config ] Option <blockc0> for device 0 (Lower Cardreader) not pre
sent, defaulting to NO
[ 13:55:12 ] [ Config ] Option <crypto-special> for device 0 (Lower Cardreader)
not present, defaulting to NO
[ 13:55:12 ] [ Config ] Option <mhz> for device 0 (Lower Cardreader) not present
, defaulting to 357
[ 13:55:12 ] [ Config ] /dev/sci0 ECM priority: round
[ 13:55:12 ] [ Config ] Option <blockc0> for device 1 (Upper Cardreader) not pre
sent, defaulting to NO
[ 13:55:12 ] [ Config ] Option <crypto-special> for device 1 (Upper Cardreader)
not present, defaulting to NO
[ 13:55:12 ] [ Config ] Option <mhz> for device 1 (Upper Cardreader) not present
, defaulting to 357
[ 13:55:12 ] [ Config ] /dev/sci1 ECM priority: round
[ 13:55:12 ] [ httpd ] httpd-user: , password: , accesslevel: admin
[ 13:55:12 ] [ EMM Cache ] Initialising dynamic Cache
[ 13:55:12 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 1881
[ 13:55:12 ] [ Loader ] Starting Telnet on port 1001
Can't create server: Address already in use
[ 13:55:12 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 13:55:12 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 13:55:12 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 13:55:12 ] [ Sci ] resetting card now
[ 13:55:12 ] [ Sci ] Reset
[ 13:55:12 ] [ Sci ] Card reset
[ 13:55:12 ] bind: error! 125: Address already in use
[ 13:55:22 ] [ ATR ] T=0 1etu=32.00us Guardtime:62etu WWT:153600etu
[ 13:55:22 ] [ ATR ] Historical bytes: e v G [82] [00] [8F] [00] [00] [00] [00]
[00] [00] [00] [00] [00]
[ 13:55:22 ] [ Loader ] Init Nagra card
[ 13:55:42 ] [ Loader ] Card 1800 on port /dev/sci0 failed
[ 13:55:42 ] [ Loader ] Starting Newcamd Server on port 34000
[ 13:55:42 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 13:55:42 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 13:55:42 ] [ Sci ] Opening device /dev/sci1
[ 13:55:42 ] [ Sci ] Could not open device /dev/sci1 [Might be in use by anothe
r process?]
[ 13:55:42 ] [ Loader ] Reset failed ...
[ 13:55:42 ] [ Loader ] Starting Newcamd Server on port 34001
[ 13:55:42 ] [ NewCS ] Ready to GO!
root@
dm800:~# [ 13:55:42 ] [ Newcamd ] Newcamd thread Server started on port 340
00
[ 13:55:42 ] bind: error! 125: Address already in use
[ 13:55:42 ] [ Newcamd ] Newcamd thread Server started on port 34001
[ 13:55:42 ] bind: error! 125: Address already in use
[ 13:55:42 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 13:55:42 ] [ Sci ] Closing device /dev/sci0 [Handle=3]
[ 13:55:42 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 13:55:42 ] [ Sci ] resetting card now
[ 13:55:42 ] [ Sci ] Reset
[ 13:55:42 ] [ Sci ] Card reset
[ 13:55:43 ] [ ATR ] T=1 1etu=32.00us Guardtime:11etu CWT:139etu BWT:15371et
u WWT:153600etu
[ 13:55:43 ] [ ATR ] Historical bytes: D N A S P 1 ? [FF] [95] [00] [FF] [91] [8
1] q [00]
[ 13:55:43 ] [ Loader ] Init Nagra card
[ 13:56:12 ] [ Loader ] Card 1800 on port /dev/sci0 failed
[ 13:56:12 ] [ Loader ] Reader type 5 on node /dev/sci1
[ 13:56:12 ] [ Sci ] Closing device /dev/sci1 [Handle=-1]
[ 13:56:12 ] [ Sci ] Opening device /dev/sci1
[ 13:56:12 ] [ Sci ] Could not open device /dev/sci1 [Might be in use by anothe
r process?]
[ 13:56:12 ] [ Loader ] Reset failed ...
[ 13:56:12 ] [ Loader ] Reinit card with caid 1800
[ 13:56:12 ] [ Sci ] Closing device /dev/sci0 [Handle=3]
[ 13:56:12 ] [ Loader ] Reader type 5 on node /dev/sci0
[ 13:56:12 ] [ Sci ] Closing device /dev/sci0 [Handle=-1]
[ 13:56:12 ] [ Sci ] Opening device /dev/sci0
SCI returned 0 on IOCTL IOCTL_SET_PARAMETERS
[ 13:56:12 ] [ Sci ] resetting card now
[ 13:56:12 ] [ Sci ] Reset
[ 13:56:12 ] [ Sci ] Card reset
[ 13:56:12 ] [ ATR ] T=0 1etu=1.00us Guardtime:266etu WWT:-244800etu
[ 13:56:12 ] [ ATR ] Historical bytes: [E0] [E1] [00] [FF] [00] [E1] [00] [E0] [
E1] [07] [FE] [E1] [00] [00] [00]
[ 13:56:12 ] [ Loader ] Init Nagra card
root@
dm800:~#
