mathias-r1
Newbie
- Registriert
- 8. Januar 2012
- Beiträge
- 25
- Reaktionspunkte
- 1
- Punkte
- 23
Hallo,
ich habe von einen freund eine pay-c-line übernommen, da er sich für längere zeit im ausland befindet.
Es sind zunächst alle Sender hell jedoch wenn ich ausschalte und wieder einschalte sind alle sender dunkel, mache ich irgendetwas falsch?
das bild bleibt sehr oft hängen, was bei meine kumpel nicht der fall war. also denke ich nicht das es an der line liegt.
wie mache ich das update auf cccam 2.3.0- die datei habe ich aber ich weis nicht wohin damit??:emoticon-0176-smoke
könnt ihr mir einen guten wlan-stick für den pingulux empfehlen?
lg mathias (sorry für die fragen aber ich habe das ganze forum durchsucht und auser zu den wlan-sticks nichts für einen neuling gefunden)
in der cccam.cfg ist nur die c-line
oscam server:
# #
# All lines preceded by "#" are comment lines so #
# use this model for all your readers ( up to 32 ). #
# A C: line is a CCcam reader , a N: line is NewCamd #
# reader , the internal card readers are also shown. #
# A card reader must always to specify the CAID. #
# #
##########################################################
#
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client ( recomended )
#
# [reader]
# label = cccam_server
# enable = 1
# protocol = cccam
# device = C: xxx
# account = xxx
# password = xxx
# cccversion = 2.0.11
# cccmaxhops = 2
# group = 1
#
# this is an example how to connect to a NewCamd server
#
# [reader]
# label = newcamd_server
# protocol = newcamd
# key = 0102030405060708091011121314
# device = myserver.dyndns.tv,66666
# account = login1,password1
# group = 1
#
# this is an example how to "read" a na*ra card ( e.g. HD+ )
#
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 1830
# n3_rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# n3_boxkey = A7642F57BC96D37C
#
#
# this is an example how to "read" a Viaccess card ( AKTA )
# the same rule apply to a Conax card replacing CAID with 0B02 ( Focus )
#
#
# [reader]
# Label = Akta
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 0500
#
#
# this is an example how to "read" a N*S card ( Dolce )
#
#
# [reader]
# Label = Dolce
# Protocol = internal
# Device = sci0
# detect = CD
# group = 1
# emmcache = 1,1,2
# caid = 092f
# boxid = 12345678
#
ich habe von einen freund eine pay-c-line übernommen, da er sich für längere zeit im ausland befindet.
Es sind zunächst alle Sender hell jedoch wenn ich ausschalte und wieder einschalte sind alle sender dunkel, mache ich irgendetwas falsch?
das bild bleibt sehr oft hängen, was bei meine kumpel nicht der fall war. also denke ich nicht das es an der line liegt.
wie mache ich das update auf cccam 2.3.0- die datei habe ich aber ich weis nicht wohin damit??:emoticon-0176-smoke
könnt ihr mir einen guten wlan-stick für den pingulux empfehlen?
lg mathias (sorry für die fragen aber ich habe das ganze forum durchsucht und auser zu den wlan-sticks nichts für einen neuling gefunden)
in der cccam.cfg ist nur die c-line
oscam server:
# #
# All lines preceded by "#" are comment lines so #
# use this model for all your readers ( up to 32 ). #
# A C: line is a CCcam reader , a N: line is NewCamd #
# reader , the internal card readers are also shown. #
# A card reader must always to specify the CAID. #
# #
##########################################################
#
# this is an example of how to connect a CCcam server
# this line acts as a cccam 2.0.11 client ( recomended )
#
# [reader]
# label = cccam_server
# enable = 1
# protocol = cccam
# device = C: xxx
# account = xxx
# password = xxx
# cccversion = 2.0.11
# cccmaxhops = 2
# group = 1
#
# this is an example how to connect to a NewCamd server
#
# [reader]
# label = newcamd_server
# protocol = newcamd
# key = 0102030405060708091011121314
# device = myserver.dyndns.tv,66666
# account = login1,password1
# group = 1
#
# this is an example how to "read" a na*ra card ( e.g. HD+ )
#
#
# [reader]
# Label = HD plus
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 1830
# n3_rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
# n3_boxkey = A7642F57BC96D37C
#
#
# this is an example how to "read" a Viaccess card ( AKTA )
# the same rule apply to a Conax card replacing CAID with 0B02 ( Focus )
#
#
# [reader]
# Label = Akta
# Protocol = internal
# Device = sci0
# detect = CD
# EMMCache = 1,1,2
# group = 1
# CAID = 0500
#
#
# this is an example how to "read" a N*S card ( Dolce )
#
#
# [reader]
# Label = Dolce
# Protocol = internal
# Device = sci0
# detect = CD
# group = 1
# emmcache = 1,1,2
# caid = 092f
# boxid = 12345678
#