Oscam Ymod fuer SCT konfigurieren

V10 · 30. August 2015

Ich bin Anfaenger und habe mir um Oscam zu "lernen" zusammen mit der Gigablue Quad Plus eine SCT Karte bestellt. Die Karte ist neu und wohl noch nicht aktiviert. Image ist Openatv 5.1 und die Cam ist Oscam Ymod 18.64. Die Cam nutze ich z. Zt. um die schweizer Sender hell zu machen.

Die SCT Karte habe ich mit dem Chip nach unten im unteren Kartenleser. Folgend meine Einstellungen:

Config:

[global]
logfile = /dev/null
disablelog = 1
unlockparental = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_retrylimit = 1600
unlockparental = 1

[cccam]
port = 12000
reshare = 0
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau
pmt_mode = 0
# request_mode = 0

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[cs357x]
port = 44357

Server:

[reader]
label = reader1_sct
enable = 1
protocol = internal
device = /dev/sci1
caid = 0500
### boxkey = 1122334455667788
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

User:

[account]
user = dvbapiau
pwd =
group = 1,2,3,4
# uniq = 3
au = 1

Die dvbapi ist leer.

Ich moechte im Augenblick (noch) nichts sharen sondern einfach nur die Karte nutzen koennen. Was mache ich falsch, wo fehlt noch was?

Vielen Dank!

V10 · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

So, ich bin ein kleines bisschen weiter. Folgend die aktuellen Einstellungen:

Config:

[global]
logfile = /dev/null
disablelog = 1
unlockparental = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_retrylimit = 1600
unlockparental = 1

# [cccam]
# port = 12000
# reshare = 0
# version = 2.3.0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau
pmt_mode = 0
# request_mode = 0

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 192.168.1.2-192.168.1.98
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

# [cs357x]
# port = 44357

Server:

# READER 0

[reader]
label = reader0_sky_s02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2

[reader]
label = reader0_sky_v13
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

[reader]
label = reader0_sky_v14
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

[reader]
label = reader0_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2

[reader]
label = reader0_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
group = 1
mhz = 368
cardmhz = 368
emmcache = 1,3,2

[reader]
label = reader0_srg_via
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

[reader]
label = reader0_orf_0d95
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

[reader]
label = reader0_orf_0d05
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2

[reader]
label = reader0_sct
enable = 1
protocol = internal
device = /dev/sci0
caid = 09CD,093B,0919,0500,0628,0604
ident = 0500:043800
# provid = 043800
# srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
lb_weight = 300
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

### READER 1

[reader]
label = reader1_sky_s02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2

[reader]
label = reader1_sky_v13
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
lb_weight = 100

[reader]
label = reader1_sky_v14
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2

[reader]
label = reader1_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2

[reader]
label = reader1_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
group = 2
mhz = 368
cardmhz = 368
emmcache = 1,3,2

[reader]
label = reader1_srg_via
enable = 0
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2

[reader]
label = reader1_orf_0d95
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2

[reader]
label = reader1_orf_0d05
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2

[reader]
label = reader1_sct
enable = 0
protocol = internal
device = /dev/sci1
caid = 09CD,093B,0919,0500,0628,0604
provid = 043800
srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

#### LINES

# [reader]
# label = line_cccam
# enable = 0
# protocol = cccam
# device = 192.168.178.1,12000
# user = user
# password = password
# fallback = 1
# group = 3
# lb_weight = 100
# cccversion = 2.3.0
# cccmaxhops = 10
# cccmindown = 0
# ccckeepalive = 1

# [reader]
# label = line_newcamd
# enable = 0
# protocol = newcamd
# device = 192.168.178.1,35000
# key = 0102030405060708091011121314
# user = user
# password = password
# fallback = 1
# group = 3

User:

[account]
user = dvbapiau
pwd =
group = 1,2,3,4
uniq = 0
au = 1

Dvbapi ist vorhanden aber leer

Servid:

#SSSS
09CD,093B,0919,0500,0628,0604:35C8|SCT Satisfaction|SCT HQ|TV|
09CD,093B,0919,0500,0628,0604:000A|SCT Satisfaction|SCT HD|TV|
09CD,093B,0919,0500,0628,0604:35C0|SCT Satisfaction|D-XTV|TV|
09CD,093B,0919,0500,0628,0604:35C1|SCT Satisfaction|D-XTV2|TV|
09CD,093B,0919,0500,0628,0604:35C2|SCT Satisfaction|S3|TV|
09CD,093B,0919,0500,0628,0604:35C9|SCT Satisfaction|S3B|TV|
09CD,093B,0919,0500,0628,0604:35C4|SCT Satisfaction|S4|TV|
09CD,093B,0919,0500,0628,0604:35C3|SCT Satisfaction|S5|TV|
09CD,093B,0919,0500,0628,0604:35C6|SCT Satisfaction|S6|TV|
09CD,093B,0919,0500,0628,0604:35C7|SCT Satisfaction|S7|TV|
0500:0013|XXX|XDream Frenchlover|TV|
0500:4225|XXX|Hustler HD 3D|TV|

Und dann habe ich noch eine services angelegt:

[sct]
caid = 09CD,093B,0919,0500,0628,0604
provid = 043800
srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7

Folgend das Log. Interessant ist, dass die Karte auf jeden Fall aktiviert ist:

2015/08/31 0:36:27 1846 767FF4A0 r found cardsystem viaccess
2015/08/31 0:36:27 1846 767FF4A0 r [viaccess-reader] card detected
2015/08/31 0:36:28 1846 767FF4A0 r [viaccess-reader] serial: 3192998145
2015/08/31 0:36:28 1846 767FF4A0 r provider: 1, id: FFF8F0, name: ISSUER, sa: BE514901, geo: empty
2015/08/31 0:36:28 1846 767FF4A0 r provider: 2, id: 043800, name: Redlight, sa: BE514901, geo: FF FF FF FF
2015/08/31 0:36:28 1846 767FF4A0 r class: 08, expiry date: 2015/08/30 - 2016/08/28
2015/08/31 0:36:28 1846 77D77000 s init for all local cards done
2015/08/31 0:36:28 1846 77D77000 s anti cascading disabled
2015/08/31 0:36:28 1846 75DFF4A0 c plain dvbapi-client granted (dvbapiau, au=auto (18 reader))
2015/08/31 0:36:28 1846 75DFF4A0 c dvbapi: 0 entries read from oscam.dvbapi
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: [ADD PID 0] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: [ADD PID 1] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: [ADD PID 2] CAID: 09CD ECM_PID: 073A PROVID: 000000
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: new program number: 2AC1 (0919:2AC1 unknown)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7719/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:0957/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: try pids again #1
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:3833/00-00): rejected group (1 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:6FC7/00-00): rejected group (2 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:A361/00-00): rejected group (2 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: try pids again #2
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:3833/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:6FC7/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:A361/00-00): rejected group (2 ms) (no matching reader)
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: try pids again #3
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapi: can't decode channel
2015/08/31 0:36:32 1846 75DFF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:3833/00-00): rejected group (2 ms) (no matching reader)

Ich wuerde mich sehr freuen, wenn mir jemand weiterhelfen koennte. Ich komme mit googlen nicht mehr weiter.

axel · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Hi,

Du hast gefühlte 15 Reader, diese sind lustig auf Gruppe 1+2 eingeteilt...

Dem User gibst Du aber 4 Gruppen?

Mein Tip:

Grib mal jedem Reader eine eigene Gruppe erstmal...

Dan kannst Du das testen, indem Du Deinem Receiver zuhause erstmal nur die "SCT Gruppe" gibst.

Gruss

Edit:

nimm mal alles! aus oscam.server raus, wo "enable = 0" steht...

V10 · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

VIELEN Dank fuer die Antwort, habe ich gemacht, bleibt aber alles gleich:

Log:

015/08/31 1:27:51 1846 761FF4A0 r provider: 2, id: 043800, name: Redlight, sa: BE514901, geo: FF FF FF FF
2015/08/31 1:27:51 1846 761FF4A0 r class: 08, expiry date: 2015/08/30 - 2016/08/28
2015/08/31 1:27:52 1846 777FB000 s init for all local cards done
2015/08/31 1:27:52 1846 777FB000 s anti cascading disabled
2015/08/31 1:27:52 1846 757FF4A0 c plain dvbapi-client granted (dvbapiau, au=auto (2 reader))
2015/08/31 1:27:52 1846 757FF4A0 c dvbapi: 19 entries read from oscam.dvbapi
2015/08/31 1:27:55 1846 757FF4A0 c dvbapi: [ADD PID 0] CAID: 2600 ECM_PID: 1FFF PROVID: 000000
2015/08/31 1:27:55 1846 757FF4A0 c dvbapi: new program number: 0008 (2600:0008 unknown)
2015/08/31 1:27:56 1846 757FF4A0 c dvbapi: Start descrambling PID #0 (CAID: 2600) 1
2015/08/31 1:27:56 1846 757FF4A0 c dvbapiau (2600&000000/0008/1FFF/0000/03:0000/22-22): emu (202 ms)
2015/08/31 1:28:18 1846 757FF4A0 c dvbapi: [ADD PID 0] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2015/08/31 1:28:18 1846 757FF4A0 c dvbapi: [ADD PID 1] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2015/08/31 1:28:18 1846 757FF4A0 c dvbapi: [ADD PID 2] CAID: 09CD ECM_PID: 073A PROVID: 000000
2015/08/31 1:28:18 1846 757FF4A0 c dvbapi: new program number: 2AC1 (0919:2AC1 unknown)
2015/08/31 1:28:18 1846 757FF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:F430/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:28:18 1846 757FF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:74CE/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:28:18 1846 757FF4A0 c dvbapi: try pids again #1
2015/08/31 1:28:18 1846 757FF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:05C8/00-00): rejected group (1 ms) (no matching reader)
2015/08/31 1:28:18 1846 757FF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:F430/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:28:19 1846 757FF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:74CE/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:28:19 1846 757FF4A0 c dvbapi: try pids again #2
2015/08/31 1:28:19 1846 757FF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:05C8/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:28:19 1846 757FF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:F430/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:28:19 1846 757FF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:74CE/00-00): rejected group (2 ms) (no matching reader)
2015/08/31 1:28:19 1846 757FF4A0 c dvbapi: try pids again #3
2015/08/31 1:28:19 1846 757FF4A0 c dvbapi: can't decode channel
2015/08/31 1:28:19 1846 757FF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:05C8/00-00): rejected group (0 ms) (no matching reader)

Server:

[reader]
label = reader0_sct
enable = 1
protocol = internal
device = /dev/sci0
caid = 09CD,093B,0919,0500,0628,0604
ident = 0500:043800
# provid = 043800
# srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
lb_weight = 300
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

### READER 1

[reader]
label = reader1_sct
enable = 0
protocol = internal
device = /dev/sci1
caid = 09CD,093B,0919,0500,0628,0604
provid = 043800
srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

axel · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Hi, auch das ist noch zuviel, wenn Du nur die eine Karte hast.

Mach das mal so, reicht völlig erstmal:

[reader]
label = SCT_lokal
enable = 1
protocol = internal
device = /dev/sci0
#caid = 09CD,093B,0919,0500,0628,0604
#ident = 0500:043800
# provid = 043800
# srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
#lb_weight = 300
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

Eventuell hiermit^^ mal spielen, 1 oder 0^^

Log posten ab Neustart dann.

V10 · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Danke, habe ich gemacht:

2015/08/31 1:50:47 1846 761FF4A0 r found cardsystem viaccess
2015/08/31 1:50:47 1846 761FF4A0 r [viaccess-reader] card detected
2015/08/31 1:50:47 1846 761FF4A0 r [viaccess-reader] serial: 3192998145
2015/08/31 1:50:47 1846 761FF4A0 r provider: 1, id: FFF8F0, name: ISSUER, sa: BE514901, geo: empty
2015/08/31 1:50:47 1846 761FF4A0 r provider: 2, id: 043800, name: Redlight, sa: BE514901, geo: FF FF FF FF
2015/08/31 1:50:48 1846 761FF4A0 r class: 08, expiry date: 2015/08/30 - 2016/08/28
2015/08/31 1:50:48 1846 777DF000 s init for all local cards done
2015/08/31 1:50:48 1846 777DF000 s anti cascading disabled
2015/08/31 1:50:48 1846 757FF4A0 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2015/08/31 1:50:48 1846 757FF4A0 c dvbapi: 19 entries read from oscam.dvbapi
2015/08/31 1:50:51 1846 757FF4A0 c dvbapi: [ADD PID 0] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2015/08/31 1:50:51 1846 757FF4A0 c dvbapi: [ADD PID 1] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2015/08/31 1:50:51 1846 757FF4A0 c dvbapi: [ADD PID 2] CAID: 09CD ECM_PID: 073A PROVID: 000000
2015/08/31 1:50:51 1846 757FF4A0 c dvbapi: new program number: 2AC1 (0919:2AC1 unknown)
2015/08/31 1:50:51 1846 757FF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:2626/00-00): not found (7 ms) by sct_lokal (Unknown ECM type)
2015/08/31 1:50:51 1846 757FF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:CD7F/00-00): not found (1 ms) by sct_lokal (Unknown ECM type)
2015/08/31 1:50:51 1846 757FF4A0 c dvbapi: try pids again #1
2015/08/31 1:50:51 1846 757FF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:29C3/00-00): not found (1 ms) by sct_lokal (Unknown ECM type)
2015/08/31 1:50:51 1846 757FF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:2626/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:50:51 1846 757FF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:CD7F/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 1:50:51 1846 757FF4A0 c dvbapi: try pids again #2
2015/08/31 1:50:51 1846 757FF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:29C3/00-00): rejected group (3 ms) (no matching reader)
2015/08/31 1:50:52 1846 757FF4A0 c dvbapiau (0919&000000/2AC1/0672/0000/B7:2626/00-00): rejected group (5 ms) (no matching reader)
2015/08/31 1:50:52 1846 757FF4A0 c dvbapiau (093B&000000/2AC1/06D6/0000/B7:CD7F/00-00): rejected group (3 ms) (no matching reader)
2015/08/31 1:50:52 1846 757FF4A0 c dvbapi: try pids again #3
2015/08/31 1:50:52 1846 757FF4A0 c dvbapi: can't decode channel
2015/08/31 1:50:52 1846 757FF4A0 c dvbapiau (09CD&000000/2AC1/073A/0000/B7:29C3/00-00): rejected group (0 ms) (no matching reader)

axel · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Ja,

Dein Client (Dvbapi) fragt nicht die CAID 0500 ab...

Was läuft da drauf, Oscam? Cccam?

Da das mal auf CAID 0500 "begrenzen".

Neustarten - Log.

Edit:

Mein Fehler, klar läuft Oscam only...

V10 · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Ich habe einzig und allein oscam_ymod 18.64 laufen, sonst nichts. Bin Anfaenger und dachte das reicht....

Vielen Dank fuer Deine Hilfe! Jetzt bleibe ich auch noch wach

axel · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

OK.

Poste nochmal alle Konfigs bitte, so wie sie sind gerade.

V10 · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Config:

[global]
logfile = /dev/null
disablelog = 1
unlockparental = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
lb_mode = 1
lb_retrylimit = 1600
unlockparental = 1

# [cccam]
# port = 12000
# reshare = 0
# version = 2.3.0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau
pmt_mode = 0
# request_mode = 0

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 192.168.1.2-192.168.1.98
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

# [cs357x]
# port = 44357

Server:

[reader]
label = SCT_lokal
enable = 1
protocol = internal
device = /dev/sci0
#caid = 09CD,093B,0919,0500,0628,0604
#ident = 0500:043800
# provid = 043800
# srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
#lb_weight = 300
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1

User:

[account]
user = dvbapiau
pwd =
group = 1,2,3,4
uniq = 0
au = 1

srvid:

#SSSS
09CD,093B,0919,0500,0628,0604:35C8|SCT Satisfaction|SCT HQ|TV|
09CD,093B,0919,0500,0628,0604:000A|SCT Satisfaction|SCT HD|TV|
09CD,093B,0919,0500,0628,0604:35C0|SCT Satisfaction|D-XTV|TV|
09CD,093B,0919,0500,0628,0604:35C1|SCT Satisfaction|D-XTV2|TV|
09CD,093B,0919,0500,0628,0604:35C2|SCT Satisfaction|S3|TV|
09CD,093B,0919,0500,0628,0604:35C9|SCT Satisfaction|S3B|TV|
09CD,093B,0919,0500,0628,0604:35C4|SCT Satisfaction|S4|TV|
09CD,093B,0919,0500,0628,0604:35C3|SCT Satisfaction|S5|TV|
09CD,093B,0919,0500,0628,0604:35C6|SCT Satisfaction|S6|TV|
09CD,093B,0919,0500,0628,0604:35C7|SCT Satisfaction|S7|TV|
0500:0013|XXX|XDream Frenchlover|TV|
0500:4225|XXX|Hustler HD 3D|TV|

services:

[sct]
caid = 09CD,093B,0919,0500,0628,0604
provid = 043800
srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7

Vielen Dank!

axel · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Also,

vorab folgende "Tuning-Vorschläge":

conf

[global]
logfile = /dev/null
disablelog = 1
unlockparental = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
#lb_mode = 1 # Loadbalancer weg, Du hast nur eine Karte!
#lb_retrylimit = 1600 # Loadbalancer weg, Du hast nur eine Karte!
# unlockparental = 1 # Warum 2x?

[cccam] # einschalten!
port = 12000 # Hier besser was anderes nehmen...
reshare = 0
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapi
pmt_mode = 0
# request_mode = 0

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 192.168.1.2-192.168.1.98
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

# [cs357x]
# port = 44357

server

[reader]
label = SCT_lokal
enable = 1
protocol = internal
device = /dev/sci0
caid = 0500
#ident = 0500:043800
# provid = 043800
# srvid = 35C8,000A,35C0,35C1,35C2,35C9,35C4,35C3,35C6,35C7
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
#lb_weight = 300
#blockemm-unknown = 1
#blockemm-u = 1
#blockemm-s = 1
#blockemm-g = 1
#saveemm-u = 1

user

[account]
user = dvbapi
pwd =
group = 1
#uniq = 0
au = 1

srvid + services brauchst Du erstmal nicht, das ist Fein-Tüning.

V10 · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Das gleiche in Gruen, es geht nicht.

axel · 31. August 2015

AW: Oscam Ymod fuer SCT konfigurieren

Log posten bitte.

V10 · 31. August 2015

Nochmals danke fuer die Nachtschicht, ich konnte nicht mehr und bin ins Bett gefallen. Also, hier das aktuelle Log File. Es heisst ja immer mit Scam wuerde alles ohne irgendwelche Configs gehen, nun auch mit Scam wird nichts hell.....

2015/08/31 16:23:59 1846 757FF4A0 r found cardsystem viaccess
2015/08/31 16:23:59 1846 757FF4A0 r [viaccess-reader] card detected
2015/08/31 16:23:59 1846 757FF4A0 r [viaccess-reader] serial: 3192998145
2015/08/31 16:24:00 1846 757FF4A0 r provider: 1, id: FFF8F0, name: ISSUER, sa: BE514901, geo: empty
2015/08/31 16:24:00 1846 757FF4A0 r provider: 2, id: 043800, name: Redlight, sa: BE514901, geo: FF FF FF FF
2015/08/31 16:24:00 1846 757FF4A0 r class: 08, expiry date: 2015/08/30 - 2016/08/28
2015/08/31 16:24:00 1846 775A3000 s init for all local cards done
2015/08/31 16:24:00 1846 775A3000 s anti cascading disabled
2015/08/31 16:24:00 1846 74DD74A0 c plain dvbapi-client granted (dvbapi, au=auto (1 reader))
2015/08/31 16:24:00 1846 74DD74A0 c dvbapi: 0 entries read from oscam.dvbapi
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: [ADD PID 0] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: [ADD PID 1] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: [ADD PID 2] CAID: 09CD ECM_PID: 073A PROVID: 000000
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: new program number: 2AC1 (0919:2AC1 unknown)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (0919&000000/2AC1/0672/0000/B7:1046/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (093B&000000/2AC1/06D6/0000/B7:CFF3/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: try pids again #1
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (09CD&000000/2AC1/073A/0000/B7:EF72/00-00): rejected group (1 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (0919&000000/2AC1/0672/0000/B7:1046/00-00): rejected group (1 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (093B&000000/2AC1/06D6/0000/B7:CFF3/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: try pids again #2
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (09CD&000000/2AC1/073A/0000/B7:EF72/00-00): rejected group (1 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (0919&000000/2AC1/0672/0000/B7:1046/00-00): rejected group (1 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (093B&000000/2AC1/06D6/0000/B7:CFF3/00-00): rejected group (0 ms) (no matching reader)
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: try pids again #3
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi: can't decode channel
2015/08/31 16:24:04 1846 74DD74A0 c dvbapi (09CD&000000/2AC1/073A/0000/B7:EF72/00-00): rejected group (0 ms) (no matching reader)

So, ich bin jetzt in der anderen Wohnung und habe es auf der VU+ Solo2 versucht, es geht auch nicht, gleiche Fehler, siehe letzter Beitrag. Irgendwie frustrierend das Ganze, ich komme nicht weiter und bald kommt die TNT Karte welche Programme mir wichtig sind. Kann mir denn keiner weiterhelfen? CCcam oder aehnliches habe ich nicht installiert, muss ich das?

Ich habs, in der user und in der server musste noch "ident = 0500:43800" rein!

V10 · 11. September 2015

AW: Oscam Ymod fuer SCT konfigurieren

So, mit der Vu+Solo2 laeuft es, mit der Gigablue Quad Plus nicht. Es ist mir ein Raetsel:

Config:

[global]
logfile = /dev/null
disablelog = 1
unlockparental = 1
nice = -1
preferlocalcards = 1
saveinithistory = 1
# lb_mode = 1
# lb_retrylimit = 1600

[cccam]
port = 14000
reshare = 0
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = dvbapiau
pmt_mode = 0
# request_mode = 0

[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 192.168.1.2-192.168.1.98
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

# [cs357x]
# port = 44357

Server:

[reader]
label = SCT_lokal
enable = 1
protocol = internal
device = /dev/sci0
caid = 0500
boxkey = 1122334455667788
detect = cd
mhz = 500
cardmhz = 500
ident = 0500:043800
group = 1
emmcache = 1,1,2

User:

[account]
user = dvbapiau
pwd =
group = 1
caid = 0500
ident = 0500:43800
# uniq = 3
au = 1

Das File fuer die dvbapi ist vorhanden aber komplett leer.

Log:

2015/09/11 0:14:18 1846 75BFF4A0 r found cardsystem viaccess
2015/09/11 0:14:18 1846 75BFF4A0 r [viaccess-reader] card detected
2015/09/11 0:14:18 1846 75BFF4A0 r [viaccess-reader] serial: 3192998145
2015/09/11 0:14:18 1846 75BFF4A0 r provider: 1, id: FFF8F0, name: ISSUER, sa: BE514901, geo: empty
2015/09/11 0:14:19 1846 75BFF4A0 r provider: 2, id: 043800, name: Redlight, sa: BE514901, geo: FF FF FF FF
2015/09/11 0:14:19 1846 75BFF4A0 r class: 08, expiry date: 2015/08/30 - 2016/08/28
2015/09/11 0:14:19 1846 779A4000 s init for all local cards done
2015/09/11 0:14:19 1846 779A4000 s anti cascading disabled
2015/09/11 0:14:19 1846 751D74A0 c plain dvbapi-client granted (dvbapiau, au=auto (1 reader))
2015/09/11 0:14:19 1846 751D74A0 c dvbapi: 0 entries read from oscam.dvbapi
2015/09/11 0:14:22 1846 751D74A0 c dvbapi: [ADD PID 0] CAID: 0919 ECM_PID: 0672 PROVID: 000000
2015/09/11 0:14:22 1846 751D74A0 c dvbapi: [ADD PID 1] CAID: 093B ECM_PID: 06D6 PROVID: 000000
2015/09/11 0:14:22 1846 751D74A0 c dvbapi: [ADD PID 2] CAID: 09CD ECM_PID: 073A PROVID: 000000
2015/09/11 0:14:22 1846 751D74A0 c dvbapi: new program number: 2AB3 (0919:2AB3 unknown)
2015/09/11 0:14:22 1846 751D74A0 c dvbapiau (0919&000000/2AB3/0672/0000/B7:AA2E/00-00): rejected caid (1 ms) (invalid caid 919)
2015/09/11 0:14:22 1846 751D74A0 c dvbapiau (093B&000000/2AB3/06D6/0000/B7:5071/00-00): rejected caid (0 ms) (invalid caid 93b)
2015/09/11 0:14:23 1846 751D74A0 c dvbapi: try pids again #1
2015/09/11 0:14:23 1846 751D74A0 c dvbapiau (09CD&000000/2AB3/073A/0000/B7:56E7/00-00): rejected caid (0 ms) (invalid caid 9cd)
2015/09/11 0:14:23 1846 751D74A0 c dvbapiau (0919&000000/2AB3/0672/0000/B7:AA2E/00-00): rejected caid (1 ms) (invalid caid 919)
2015/09/11 0:14:23 1846 751D74A0 c dvbapiau (093B&000000/2AB3/06D6/0000/B7:5071/00-00): rejected caid (0 ms) (invalid caid 93b)
2015/09/11 0:14:23 1846 751D74A0 c dvbapi: try pids again #2
2015/09/11 0:14:23 1846 751D74A0 c dvbapiau (09CD&000000/2AB3/073A/0000/B7:56E7/00-00): rejected caid (0 ms) (invalid caid 9cd)
2015/09/11 0:14:23 1846 751D74A0 c dvbapiau (0919&000000/2AB3/0672/0000/B7:AA2E/00-00): rejected caid (1 ms) (invalid caid 919)
2015/09/11 0:14:23 1846 751D74A0 c dvbapiau (093B&000000/2AB3/06D6/0000/B7:5071/00-00): rejected caid (0 ms) (invalid caid 93b)
2015/09/11 0:14:23 1846 751D74A0 c dvbapi: try pids again #3
2015/09/11 0:14:23 1846 751D74A0 c dvbapi: can't decode channel
2015/09/11 0:14:23 1846 751D74A0 c dvbapiau (09CD&000000/2AB3/073A/0000/B7:56E7/00-00): rejected caid (0 ms) (invalid caid 9cd)

Ich verstehe das nicht, wie kann das bei gleichem Image und gleicherm Oscamymod auf der einen Box funktionieren und auf der anderen nicht?!

Hoffentlich kann mir jemand helfen. Vielen Dank!

Oscam Ymod fuer SCT konfigurieren

V10

Ist gelegentlich hier

V10

Ist gelegentlich hier

axel

V10

Ist gelegentlich hier

axel

V10

Ist gelegentlich hier

axel

V10

Ist gelegentlich hier

axel

V10

Ist gelegentlich hier

axel

V10

Ist gelegentlich hier

axel

V10

Ist gelegentlich hier

V10

Ist gelegentlich hier

Ähnliche Themen

Oscam Ymod fuer SCT konfigurieren

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Ist gelegentlich hier

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz