oscam vs cccam - user bleiben nicht online

[ollyvia]

Hallo zusammen,
nach langen "nur lesen" brauche ich Eure Hilfe.

Meine Hardware:
Linux PC mit Ubuntu-Server x86
2x EasyMouse (S02 & HD+01) HD+ habe ich in dieser Konstellation noch nicht mit eingebunden möchte erst das wichtige zum laufen bekommen
2 Dreamboxen als Client mit CCcam
1 DBox2 als Client auch mit CCCam

Ich habe eine Oscam laufen, wo eine S02 dran hängt. Früher hatte ich alles über die cccam laufen - was auch bis jetzt noch funktioniert - bis die oscam richtig läuft.
Nun möchte ich aber alles auf die oscam umstellen.
Auf meinen DreamBoxen (Schlafzimmer, Wohnzimmer, Keller[DBox2], Büro [mit Hadu Plugin]) ist - und soll auch so bleiben - cccam drauf.
Nun habe ich alle user[accounts], ehemalig die cccam.cfg F: Lines, in die oscam.user eingetragen.
Wenn ich jetzt die oscam starte und mir das Protokoll/Log ansehe und auch das WebIf - verbinden sich alle Boxen brav mit der oscam...

Aber jetzt...
nach kurzer Zeit (ca. 20 Sek.) gehen alle User in den Status "connected" und bleiben da auch ausser natürlich wenn sie offline gehen. Also bekommt die oscam alles mit - denke ich.
Es werden laut Log keine Anfragen an die oscam gestellt.
Nur ein User, der Büro Rechner, mit dem DVB-Viewer + Hadu-Plugin bleibt online und es wird auch hell und die Anfragen werden laut Log beantwortet.
Alle anderen bleiben in dem "Connected" Status.

Kann mir einer einen Tip geben was das sein kann oder wo ich drehen muss?

Ich hoffe das ich es ein wenig verständlich rüber gebracht habe und mir mich versteht.


-ollyvia-

 

[dodo83]

AW: oscam vs cccam - user bleiben nicht online

hi,
die User sollen auch nicht Online bleiben
als Online werden die nur angezeigt wenn die was abfragen, wenn keine Abfrage der Karte/n stattfindet gehen die auf Connected

 

[ollyvia]

AW: oscam vs cccam - user bleiben nicht online

OK... danke...
cool, ist ja dann nicht alles verkehrt gewesen

Aber warum bleiben denn die anderen dunke und stellen keine Anfragen?

-ollyvia-

 

[pehedima]

AW: oscam vs cccam - user bleiben nicht online

Poste bitte deine Configs (oscam.conf, oscam.user und oscam.server) vom Server und ein aussagekräftiges Log (oscam.log).

 

[ollyvia]

AW: oscam vs cccam - user bleiben nicht online

Ja, mache ich.
Kann nur etwas dauern.
Danke schon mal...!

 

[DarkStarXxX]

AW: oscam vs cccam - user bleiben nicht online

Keep Connected soll Wunder verbringen

 

[ollyvia]

AW: oscam vs cccam - user bleiben nicht online

keepconnected habe ich gesetzt
dachte auch erst das es das ist... aber?!?

-ollyvia-

 

[cojo]

AW: oscam vs cccam - user bleiben nicht online

ohne configs und log kann es nicht weitergehen

 

[ollyvia]

AW: oscam vs cccam - user bleiben nicht online

Richtig...
Werde sie auch heute Abend posten.
Ich denke, dass Ihr mich dann, auf den richtigen Weg bringt.

-ollyvia-

 

[ollyvia]

AW: oscam vs cccam - user bleiben nicht online

So, jetzt hab ich es...
Vielleicht könnt Ihr mir ja jetzt mehr helfen... Danke schon mal...!


oscam.conf

Spoiler

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /usr/local/etc/oscam.log;stdout
maxlogsize = 256

[webif]
HttpPort = 17000
HttpUser = admin
HttpPWD = oscam
httptpl = /var/share/oscam/tpl
httpcss = /var/share/oscam/tpl/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.2.1-192.168.2.255
HttpReadOnly = 1

[cccam]
port = 12000
forward_origin_card = 1
ignorereshare = 0
Version = 2.3.0
stealth = 1
reshare = 0
reshare_mode = 0
keepconnected = 1

oscam.server

Spoiler

[reader]
label = S02
protocol = mouse
device = /dev/ttyUSB0
detect = CD
mhz = 357
cardmhz = 600
ins7e11 = 15
ndsversion = 2
caid = 1722,1834,1833
rsakey=BA....79
boxkey=A7....7C
group = 3
emmcache = 1,1,2

oscam.user

Spoiler

[account]
user = computerBuero51
pwd = xxx
au = 1
group = 3
cccmaxhops = 2

[account]
user = Schlafzimmer51
pwd = xxx
au = 1
group = 3
cccmaxhops = 2

Log Datei

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Oct 14 19:18:42 2014
-------------------------------------------------------------------------------
2014/10/14 19:18:42 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9912 (i486-linux-gnu-libusb-pcsc)
2014/10/14 19:18:42 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2367
2014/10/14 19:18:42 0 s [Emu] OSEmu (built-in) version 102
2014/10/14 19:18:42 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/10/14 19:18:42 0 s signal handling initialized
2014/10/14 19:18:42 0 s cccam: initialized (fd=5, port=12000)
2014/10/14 19:18:42 0 s S02 [mouse] creating thread for device /dev/ttyUSB0
2014/10/14 19:18:42 0 s emulator [emu] creating thread for device emulator
2014/10/14 19:18:42 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/10/14 19:18:42 0 s waiting for local card init
2014/10/14 19:18:42 8C25C20 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/10/14 19:18:42 B7201658 h webif: decompressed 154607 bytes back into 365680 bytes
2014/10/14 19:18:42 B7201658 h HTTP Server running. ip=0.0.0.0 port=17000
2014/10/14 19:18:42 8C23DF8 r S02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=600)
2014/10/14 19:18:43 8C23DF8 r S02 [mouse] card detected
2014/10/14 19:18:45 8C23DF8 r S02 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/10/14 19:18:45 8C23DF8 r S02 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/10/14 19:18:45 8C23DF8 r S02 [mouse] Calculated work ETU is 203.19 us reader mhz = 357
2014/10/14 19:18:45 8C23DF8 r S02 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/10/14 19:18:46 8C23DF8 r S02 [mouse] detect irdeto tunneled nagra card
2014/10/14 19:18:46 8C23DF8 r S02 [mouse] rsa key configured -> using nagra mode
2014/10/14 19:18:50 8C23DF8 r S02 [mouse] ready for requests
2014/10/14 19:18:50 8C23DF8 r S02 [mouse] found card system nagra
2014/10/14 19:18:50 8C23DF8 r S02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/14 19:18:50 8C23DF8 r S02 [nagra] ROM: D N A S P 1 8 1
2014/10/14 19:18:50 8C23DF8 r S02 [nagra] REV: D V R L 0 0
2014/10/14 19:18:50 8C23DF8 r S02 [nagra] SER: ############
2014/10/14 19:18:50 8C23DF8 r S02 [nagra] CAID: 1833
2014/10/14 19:18:50 8C23DF8 r S02 [nagra] Prv.ID: 00 00 04 01 (sysid)
2014/10/14 19:18:50 8C23DF8 r S02 [nagra] Prv.ID: 00 00 00 00
2014/10/14 19:18:51 8C23DF8 r S02 [nagra] IRD ID: ############
2014/10/14 19:18:51 8C23DF8 r S02 [nagra] active to: 2014/12/04 02:10
2014/10/14 19:18:52 0 s init for all local cards done
2014/10/14 19:18:52 0 s anti cascading disabled
2014/10/14 19:18:55 8C4B5C0 c encrypted cccam-client 192.168.2.54 granted (computerBuero51, au=auto (2 reader))
2014/10/14 19:18:57 8C4D3E8 c encrypted cccam-client 192.168.2.206 granted (Schlafzimmer51, au=auto (2 reader))
2014/10/14 19:18:58 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:CBFA4E544A330761982E050E25F16CF2): found (1083 ms) by S02
2014/10/14 19:19:03 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:C34538ED1A84FDD573DAC072B0D22434): found (1004 ms) by S02
2014/10/14 19:19:17 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:19E8DFB2F116AFE045C6F2943BAE6962): found (1008 ms) by S02
2014/10/14 19:19:24 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:8C7DCCB8793FC2D66E4CDE7A040FD25D): found (1007 ms) by S02
2014/10/14 19:19:31 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:34F05A309E9FE783C0AA96969BB5CAFC): found (1005 ms) by S02
2014/10/14 19:19:38 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:F417438AC2F4FEF39BE85913DE2CFEDE): found (1018 ms) by S02
2014/10/14 19:19:45 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:4A1F8652D391962B1DE5E33898439E48): found (1010 ms) by S02
2014/10/14 19:19:52 8C4B5C0 c computerBuero51 (1833&000401/0000/0032/89:4652ED643D90966625586322A98DE9BE): found (1005 ms) by S02

 

[supraracer]

AW: oscam vs cccam - user bleiben nicht online

Du schreibst von 3 Boxen, in der oscam.user sind es nur 2 Accounts? Poste deine Configs komplett und ohne Zensur, ändere zur Not in der Testphase deine Passwörter auf 12345678 und wenn alles läuft ändere es wieder zurück auf Server und Client.
Wie sieht deine CCcam.cfg aus auf den Client Boxen die nicht funktionieren?

EDIT:
Lösche mal den Inhalt deiner oscam.server komplett und ersetze mit diesem Reader:

Spoiler

[reader]
label = S02
protocol = mouse
device = /dev/ttyUSB0
caid = 1702
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 3
emmcache = 1,3,2

Bei allen deinen Usern fügst du noch den Betatunnel ein:
betatunnel = 1833.FFFF:1702

Also z.B.

Spoiler

[account]
user = computerBuero51
pwd = xxx
au = 1
group = 3
cccmaxhops = 2
betatunnel = 1833.FFFF:1702

Dann OScam neu starten und noch mal testen.

-supraracer

 

[ollyvia]

AW: oscam vs cccam - user bleiben nicht online

Ok... da ist denn alles...
Die Keller Box hängt im moment nicht im Netz.

oscam.user

Spoiler

[account]
user = computerBuero51
pwd = 123456
au = 1
group = 3
cccmaxhops = 2

[account]
user = Schlafzimmer51
pwd = 123456
au = 1
group = 3
cccmaxhops = 2

[account]
user = wohnzimmer51
pwd = 123456
au = 1
group = 3
cccmaxhops = 2

cfg wohnzimmer

Spoiler

C: 192.168.2.200 12000 wohnzimmer51 123456 yes

log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Tue Oct 14 20:06:50 2014
-------------------------------------------------------------------------------
2014/10/14 20:06:50 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 10439
2014/10/14 20:06:50 0 s [Emu] OSEmu (built-in) version 102
2014/10/14 20:06:50 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/10/14 20:06:50 0 s signal handling initialized
2014/10/14 20:06:50 0 s cccam: initialized (fd=5, port=12000)
2014/10/14 20:06:50 0 s S02 [mouse] creating thread for device /dev/ttyUSB0
2014/10/14 20:06:50 0 s emulator [emu] creating thread for device emulator
2014/10/14 20:06:50 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/10/14 20:06:50 0 s waiting for local card init
2014/10/14 20:06:50 0 >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r9912 (i486-linux-gnu-libusb-pcsc)
2014/10/14 20:06:50 8F51C20 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/10/14 20:06:50 B7100870 h webif: decompressed 154607 bytes back into 365680 bytes
2014/10/14 20:06:50 B7100870 h HTTP Server running. ip=0.0.0.0 port=17000
2014/10/14 20:06:50 8F4FDF8 r S02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=600)
2014/10/14 20:06:51 8F4FDF8 r S02 [mouse] card detected
2014/10/14 20:06:52 8F4FDF8 r S02 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/10/14 20:06:52 8F4FDF8 r S02 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/10/14 20:06:52 8F4FDF8 r S02 [mouse] Calculated work ETU is 203.19 us reader mhz = 357
2014/10/14 20:06:52 8F4FDF8 r S02 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/10/14 20:06:53 8F4FDF8 r S02 [mouse] detect irdeto tunneled nagra card
2014/10/14 20:06:53 8F4FDF8 r S02 [mouse] rsa key configured -> using nagra mode
2014/10/14 20:06:58 8F4FDF8 r S02 [mouse] ready for requests
2014/10/14 20:06:58 8F4FDF8 r S02 [mouse] found card system nagra
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] ROM: D N A S P 1 8 1
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] REV: D V R L 0 0
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] SER: ############
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] CAID: 1833
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] Prv.ID: 00 00 04 01 (sysid)
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] Prv.ID: 00 00 00 00
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] IRD ID: ############
2014/10/14 20:06:58 8F4FDF8 r S02 [nagra] active to: 2014/12/04 02:10
2014/10/14 20:06:59 0 s init for all local cards done
2014/10/14 20:06:59 0 s anti cascading disabled
2014/10/14 20:06:59 8F5B940 c anonymous disconnected from 192.168.2.206
2014/10/14 20:06:59 8F59B18 c anonymous disconnected from 192.168.2.202
2014/10/14 20:07:02 8F5F1B8 c encrypted cccam-client 192.168.2.54 granted (computerBuero51, au=auto (2 reader))
2014/10/14 20:07:04 8F62228 c encrypted cccam-client 192.168.2.202 granted (wohnzimmer51, au=auto (2 reader))
2014/10/14 20:07:04 8F64050 c encrypted cccam-client 192.168.2.206 granted (Schlafzimmer51, au=auto (2 reader))
2014/10/14 20:07:06 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:A914E58F2C632BC0E4F2C86B0DFC34C3): found (1079 ms) by S02
2014/10/14 20:07:08 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:093638D81FC0DBFD37DD1BBE0880FA7F): found (1005 ms) by S02
2014/10/14 20:07:15 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:303D440EF5CC71DE91B25B20FCCD0402): found (1012 ms) by S02
2014/10/14 20:07:22 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:BE09F125665A51D111021FFC6F9E097E): found (1009 ms) by S02
2014/10/14 20:07:29 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:A4651F5DC250D0A357C59ACF36A8A5D9): found (1011 ms) by S02
2014/10/14 20:07:36 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:6C48BAF6F0CE4E1F6D0EAB3B44710097): found (1006 ms) by S02
2014/10/14 20:07:43 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:3BE69AB0D05ECBB026B94237C6BBE7F1): found (1004 ms) by S02
2014/10/14 20:07:50 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:B6B0583C65DAFCBE7E99547DD8770F47): found (1007 ms) by S02
2014/10/14 20:07:57 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:0961A3D53274A7A93867CD6387AF88BF): found (1009 ms) by S02
2014/10/14 20:08:04 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:690B856A1F75FF1EFF226100E31247D5): found (1004 ms) by S02
2014/10/14 20:08:11 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:36414786C7870F003DF003707D9CB375): found (1008 ms) by S02
2014/10/14 20:08:18 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89F617C535C0442D23240019095FA95FD): found (1012 ms) by S02
2014/10/14 20:08:25 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:0CB9FE7311E7B4AC277B3E201FD00378): found (1011 ms) by S02
2014/10/14 20:08:32 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:8D7B2B65E88BBEE3EFEA9E3CE4BA3A0D): found (1009 ms) by S02
2014/10/14 20:08:39 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:EDD692BA21701595483B10101ED8ED54): found (1014 ms) by S02
2014/10/14 20:08:46 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:C24A2D164D9DFF16252B491B9AE85087): found (1011 ms) by S02
2014/10/14 20:08:53 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:03FCA801DDCDFE6A7D4709F3C975C02F): found (1009 ms) by S02
2014/10/14 20:09:00 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:53218256D8661294D69CC200E9A556E5): found (1008 ms) by S02
2014/10/14 20:09:07 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:039884CDC5549A1C183A667D4EBD3B8E): found (1010 ms) by S02
2014/10/14 20:09:14 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:39E9007247180C0E2B2AD0E4CC264058): found (1010 ms) by S02
2014/10/14 20:09:21 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:A107EEC5CE53A8A5E21A60FC8333DC09): found (1010 ms) by S02
2014/10/14 20:09:28 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:40C5F7F76EEAA96A71FB9EDB88FCEE22): found (1005 ms) by S02
2014/10/14 20:09:35 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:8364BB43BDB1D55CD9C629322C1DDA32): found (1011 ms) by S02
2014/10/14 20:09:42 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:B50C30D22AF50C858CD10794FA82D324): found (1008 ms) by S02
2014/10/14 20:09:49 8F5F1B8 c computerBuero51 (1833&000401/0000/0032/89:6DBA2F4629E934A030775E8457558DF5): found (1007 ms) by S02

puh...
nur die passwörter habe ich geändert...

 

[supraracer]

AW: oscam vs cccam - user bleiben nicht online

EDIT von oben beachten, hier noch mal falls du ihn nicht gesehen hast:

Lösche mal den Inhalt deiner oscam.server komplett und ersetze mit diesem Reader:

Spoiler

[reader]
label = S02
protocol = mouse
device = /dev/ttyUSB0
caid = 1702
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 3
emmcache = 1,3,2

Bei allen deinen Usern fügst du noch den Betatunnel ein:
betatunnel = 1833.FFFF:1702

Also z.B.

Spoiler

[account]
user = computerBuero51
pwd = xxx
au = 1
group = 3
cccmaxhops = 2
betatunnel = 1833.FFFF:1702

Dann OScam neu starten und noch mal testen.

-supraracer

 

[bombadil]

AW: oscam vs cccam - user bleiben nicht online

Hi,

ändere das in der oscam.conf

forward_origin_card = 0
ignorereshare = 0
Version = 2.3.0
stealth = 0

 

[ollyvia]

AW: oscam vs cccam - user bleiben nicht online

die oscam.conf

Spoiler

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
logfile = /usr/local/etc/oscam.log;stdout
maxlogsize = 256


[webif]
HttpPort = 17000
HttpUser = admin
HttpPWD = oscam
httptpl = /var/share/oscam/tpl
httpcss = /var/share/oscam/tpl/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 192.168.2.1-192.168.2.255
HttpReadOnly = 1

[cccam]
port = 12000
forward_origin_card = 0
ignorereshare = 0
Version = 2.3.0
stealth = 0
reshare = 0
reshare_mode = 0
keepconnected = 1

oscam.user

Spoiler

[account]
user = computerBuero51
pwd = 123456
au = 1
group = 3
cccmaxhops = 2
betatunnel = 1833.FFFF:1702

[account]
user = Schlafzimmer51
pwd = 123456
au = 1
group = 3
cccmaxhops = 2
betatunnel = 1833.FFFF:1702

[account]
user = wohnzimmer51
pwd = 123456
au = 1
group = 3
cccmaxhops = 2
betatunnel = 1833.FFFF:1702

log

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Tue Oct 14 20:22:22 2014
-------------------------------------------------------------------------------
2014/10/14 20:22:22 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9912 (i486-linux-gnu-libusb-pcsc)
2014/10/14 20:22:22 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 12446
2014/10/14 20:22:22 0 s [Emu] OSEmu (built-in) version 102
2014/10/14 20:22:22 0 s userdb reloaded: 3 accounts loaded, 0 expired, 0 disabled
2014/10/14 20:22:22 0 s signal handling initialized
2014/10/14 20:22:22 0 s cccam: initialized (fd=5, port=12000)
2014/10/14 20:22:22 0 s S02 [mouse] creating thread for device /dev/ttyUSB0
2014/10/14 20:22:22 0 s emulator [emu] creating thread for device emulator
2014/10/14 20:22:22 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/10/14 20:22:22 0 s waiting for local card init
2014/10/14 20:22:22 96F1C20 r emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
2014/10/14 20:22:22 96F91A8 h webif: decompressed 154607 bytes back into 365680 bytes
2014/10/14 20:22:22 96F91A8 h HTTP Server running. ip=0.0.0.0 port=17000
2014/10/14 20:22:22 96EFDF8 r S02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=600)
2014/10/14 20:22:23 96EFDF8 r S02 [mouse] card detected
2014/10/14 20:22:24 96EFDF8 r S02 [mouse] ATR: 3B 9F 21 0E 49 52 44 45 54 4F 20 41 43 53 03 84 55 FF 80 6D
2014/10/14 20:22:24 96EFDF8 r S02 [mouse] Init card protocol T14, FI=2, F=558, D=1, N=0
2014/10/14 20:22:24 96EFDF8 r S02 [mouse] Calculated work ETU is 203.19 us reader mhz = 357
2014/10/14 20:22:24 96EFDF8 r S02 [mouse] ATR Fsmax is 6 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/10/14 20:22:25 96EFDF8 r S02 [mouse] detect irdeto tunneled nagra card
2014/10/14 20:22:25 96EFDF8 r S02 [mouse] rsa key configured -> using nagra mode
2014/10/14 20:22:30 96EFDF8 r S02 [mouse] ready for requests
2014/10/14 20:22:30 96EFDF8 r S02 [mouse] found card system nagra
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] ROM: D N A S P 1 8 1
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] REV: D V R L 0 0
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] SER: ############
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] CAID: 1833
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] Prv.ID: 00 00 04 01 (sysid)
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] Prv.ID: 00 00 00 00
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] IRD ID: ############
2014/10/14 20:22:30 96EFDF8 r S02 [nagra] active to: 2014/12/04 02:10
2014/10/14 20:22:31 0 s init for all local cards done
2014/10/14 20:22:31 0 s anti cascading disabled
2014/10/14 20:22:31 9700438 c anonymous disconnected from 192.168.2.202
2014/10/14 20:22:31 96FE610 c anonymous disconnected from 192.168.2.206
2014/10/14 20:22:35 9703CB0 c encrypted cccam-client 192.168.2.54 granted (computerBuero51, au=auto (2 reader))
2014/10/14 20:22:36 9708B48 c encrypted cccam-client 192.168.2.202 granted (wohnzimmer51, au=auto (2 reader))
2014/10/14 20:22:36 9706D20 c encrypted cccam-client 192.168.2.206 granted (Schlafzimmer51, au=auto (2 reader))
2014/10/14 20:22:37 9703CB0 c computerBuero51 (1702&000000/0000/0032/93:0B51D2D007436C0E1560C1C4FF596672): rejected caid (1 ms) by S02(btun 1833)
2014/10/14 20:22:39 0 --- Skipped 1 duplicated log lines ---
2014/10/14 20:22:39 9703CB0 c computerBuero51 (1702&000000/0000/0032/93:0B51D2D007436C0E1560C1C4FF596672): rejected caid (0 ms) by S02(btun 1833)
2014/10/14 20:22:40 9703CB0 c computerBuero51 (1702&000000/0000/0032/93:0B51D2D007436C0E1560C1C4FF596672): rejected caid (1 ms) by S02(btun 1833)

jetzt bleibt alles stehen nachdem ich das mit dem betatunnel eingetragen habe.

- - - - - - - - - -

betatunnel wieder raus, geht zumindestens wieder buero... :boredom: