Oscam v14 Problem

[Ripmaster]

Spoiler

2014/05/29 00:43:39 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9748 (x86_64-linux-gnu)
2014/05/29 00:43:39 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 5654
2014/05/29 00:43:39 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/05/29 00:43:39 0 s signal handling initialized
2014/05/29 00:43:39 0 s skydev14 [mouse] creating thread for device /dev/ttyUSB1
2014/05/29 00:43:39 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/05/29 00:43:39 0 s anti cascading disabled
2014/05/29 00:43:39 1BE7820 c plain dvbapi-client granted (anonymous, au=off)
2014/05/29 00:43:39 1BE7820 c ERROR: Could not detect DVBAPI version.
2014/05/29 00:43:39 1C0008C0 h webif: decompressed 151915 bytes back into 363072 bytes
2014/05/29 00:43:39 1C0008C0 h HTTP Server running. ip=0.0.0.0 port=8888
2014/05/29 00:43:39 1BE0D70 r skydev14 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=357)
2014/05/29 00:43:40 1BE0D70 r skydev14 [mouse] card detected
2014/05/29 00:43:42 1BE0D70 r skydev14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/05/29 00:43:42 1BE0D70 r skydev14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/05/29 00:43:42 1BE0D70 r skydev14 [mouse] Setting baudrate to 38400 bps
2014/05/29 00:43:42 1BE0D70 r skydev14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/05/29 00:43:42 1BE0D70 r skydev14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/05/29 00:43:46 1BE0D70 r skydev14 [mouse] card system not supported
2014/05/29 00:43:46 1BE0D70 r skydev14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/05/29 00:43:49 1BE0D70 r skydev14 [mouse] ATR: E3 03 40 37 5B
2014/05/29 00:43:49 1BE0D70 r skydev14 [mouse] ERROR: Could not read reader->convention
2014/05/29 00:43:49 1BE0D70 r skydev14 [mouse] Error activating card.
2014/05/29 00:43:52 1BE0D70 r skydev14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/05/29 00:43:52 1BE0D70 r skydev14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/05/29 00:43:52 1BE0D70 r skydev14 [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/05/29 00:43:52 1BE0D70 r skydev14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/05/29 00:43:56 1BE0D70 r skydev14 [mouse] card system not supported
2014/05/29 00:43:56 1BE0D70 r skydev14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/05/29 00:43:56 1BE0D70 r skydev14 [mouse] card initializing error
2014/05/29 00:44:14 1BE0D70 r skydev14 [mouse] card detected
2014/05/29 00:44:15 1BE0D70 r skydev14 [mouse] ATR: 37 5B BF F5 FE 0F 7D F2 AF 69 00 AD F5 F0 FF
2014/05/29 00:44:15 1BE0D70 r skydev14 [mouse] ERROR: Could not read reader->convention
2014/05/29 00:44:15 1BE0D70 r skydev14 [mouse] Error activating card.
2014/05/29 00:44:17 1BE0D70 r skydev14 [mouse] ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
2014/05/29 00:44:17 1BE0D70 r skydev14 [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/05/29 00:44:17 1BE0D70 r skydev14 [mouse] Setting baudrate to 38400 bps
2014/05/29 00:44:17 1BE0D70 r skydev14 [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/05/29 00:44:17 1BE0D70 r skydev14 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/05/29 00:44:21 1BE0D70 r skydev14 [mouse] card system not supported
2014/05/29 00:44:21 1BE0D70 r skydev14 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/05/29 00:44:24 1BE0D70 r skydev14 [mouse] ATR: C0 03 40 37 5B
2014/05/29 00:44:24 1BE0D70 r skydev14 [mouse] ERROR: Could not read reader->convention
2014/05/29 00:44:24 1BE0D70 r skydev14 [mouse] Error activating card.
2014/05/29 00:44:26 1BE0D70 r skydev14 [mouse] ATR: FF 03 40 37 5B
2014/05/29 00:44:26 1BE0D70 r skydev14 [mouse] ERROR: Could not read reader->convention
2014/05/29 00:44:26 1BE0D70 r skydev14 [mouse] Error activating card.
2014/05/29 00:44:29 1BE0D70 r skydev14 [mouse] ATR: C3 03 40 37 5B
2014/05/29 00:44:29 1BE0D70 r skydev14 [mouse] ERROR: Could not read reader->convention
2014/05/29 00:44:29 1BE0D70 r skydev14 [mouse] Error activating card.
2014/05/29 00:44:30 1BE0D70 r skydev14 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/05/29 00:44:30 1BE0D70 r skydev14 [mouse] card initializing error

Spoiler

[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout=3
ClientMaxIdle=120
CacheDelay = 120
BindWait = 5
WaitForCards = 0
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
maxlogsize = 200






[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1


[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255


[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dvbapi
###### for E2 set pmt_mode = 0 ###########
###### for Titan set pmt_mode = 4 ###########
pmt_mode = 0

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9748
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = skydev14
description = skydev14
protocol = mouse
device = /dev/ttyUSB1
detect = cd
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 15
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
ndsversion = 2

 

[volbuss]

AW: Oscam v14 Problem

es kommt sicherlich auf dein System an, wo die Oscam läuft. Aber ich habe nach einigen probieren auf der FB7170 nur über das smartreader-Protokoll Erfolg gehabt:

Spoiler

[reader]
label = V14smart
protocol = smartreader
device = Serial:hdplus01
autospeed = 0
caid = 098C
boxid = 12345678
ins7e11 = 13
ecmwhitelist = 098C:98,9B,97,57,91
detect = cd
mhz = 369
cardmhz = 369
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-31,36,38,40,42-44,65-72,74-124,126-127,131,141-255
ndsversion = 2

 

[volbuss]

AW: Oscam v14 Problem

meine Einstellungen gelten für den Smargo mit firmware 1.07 und FB7170 mit Oscam r9705.
Easymouse2 habe ich leider keine zum testen.

 

[Ripmaster]

AW: Oscam v14 Problem

Kann mir keiner helfen ?

Gesendet von meinem HTC One mit Tapatalk

 

[ghost0815]

AW: Oscam v14 Problem

Easymouse2
3,5 Volt / Phoenix / 3.579 MHZ/ ganz rechts ist egal !! durch die vorhergehende Einstellung auf 3.579

Spoiler

[reader]
label = V14
enable = 1
protocol = mouse
device = /dev/ttyUSB0
boxid = 12345678
ins7e11 = 15
detect = cd
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
blockemm-bylen = 1-38,40,42-44,65-124,126-127,139-255
ndsversion = 2

 

[michael861]

AW: Oscam v14 Problem

Warum braucht man mit dem easymouse2 reader kein
-cardmhz
Und
-mhz
In der readerconfig?
Bzw. was würde es bringen wenn man es doch nutzt?

Gruss michael861

 

[bombadil]

AW: Oscam v14 Problem

Moin,

ich bin mir nicht ganz sicher, aber ich denke 357 ist der Standardwert. Du kannst ihn aber eintragen, sollte nichts ändern.

Sollte eine andere SC benutzt werden, muss der Wert angepasst werden.


Lieben Gruß
Bombadil

Tapa-Talking by Eifön

 

[Ripmaster]

AW: Oscam v14 Problem

Nütz nix .

Gesendet von meinem HTC One mit Tapatalk

 

[bombadil]

AW: Oscam v14 Problem

Hi,

coole Antwort. Was nützt nichts?

Grüße
Bombadil

 

[Ripmaster]

AW: Oscam v14 Problem

Card init error

Gesendet von meinem HTC One mit Tapatalk

 

[bombadil]

AW: Oscam v14 Problem

Hi,

hast du die Maus so eingestellt, wie gepostet wurde? Du kannst es auch mal mit 5V testen, ziehe den Reader vorher ab. Dazu läuft eine NDS Karte laut Spezifikation mit

cardmhz = 357

mhz auch im Reader einstellen und ebenfalls im Reader eintragen

mhz = 357

Teste auch mal mit

mhz = 600

die beiden linken Schalter an der Maus dann nach oben.

Grüße
Bombadil