Oscam und Meo card

[lala50]

Moi
Seit tage versuche im slot 1( untem ) vom dreambox eine meo card am laufen zu bringen; slot 0 läuft v14 erfolgreich.

Häts gerne dass oscam beide karten lesen , und nicht wechsel zwischen oscam und cccam.

hier eine log von oscam:

Spoiler

5B35B8 r meo [internal] Reader initialized (device=/dev/sci1, detect=cd, mhz=600, cardmhz=369)
2014/12/30 19:51:51 5B9A28 h webif: decompressed 69662 bytes back into 195704 bytes
2014/12/30 19:51:51 5B9A28 h HTTP Server running. ip=0.0.0.0 port=8088
2014/12/30 19:51:51 5B18B8 r v14 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
2014/12/30 19:51:52 5B35B8 r meo [internal] card detected
2014/12/30 19:51:54 5B35B8 r meo [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2014/12/30 19:51:54 5B35B8 r meo [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2014/12/30 19:51:54 5B35B8 r meo [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/12/30 19:51:54 5B35B8 r meo [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/12/30 19:52:13 5B35B8 r meo [internal] card system not supported
2014/12/30 19:52:13 5B35B8 r meo [internal] Normal mode failed, reverting to Deprecated Mode
2014/12/30 19:52:14 5B35B8 r meo [internal] ATR: 3B F7 11 00 01 40 96 70 70 0A 0E 6C B6 D6
2014/12/30 19:52:14 5B35B8 r meo [internal] Init card protocol T0, FI=1, F=372, D=1, N=1
2014/12/30 19:52:14 5B35B8 r meo [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/12/30 19:52:14 5B35B8 r meo [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/12/30 19:52:33 5B35B8 r meo [internal] card system not supported
2014/12/30 19:52:33 5B35B8 r meo [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/12/30 19:52:33 5B35B8 r meo [internal] card initializing error
2014/12/30 19:52:33 0 s init for all local cards done
2014/12/30 19:52:33 0 s anti cascading disabled
2014/12/30 19:52:33 5BEEF8 c plain dvbapi-client granted (local, au=on (1 reader))
2014/12/30 19:52:33 5BEEF8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/12/30 19:52:34 5BEEF8 c [DVBAPI] Receiver sends PMT command 3 for channel 0065
2014/12/30 19:52:34 5BEEF8 c [DVBAPI] Receiver wants to demux srvid 0065 on adapter 0000 camask 0008 index 0003 pmtpid 0101
2014/12/30 19:52:34 5BEEF8 c [ADD PID 0] CAID: 0100 ECM_PID: 0401 PROVID: 005221
2014/12/30 19:52:34 5BEEF8 c [ADD PID 1] CAID: 1814 ECM_PID: 0401 PROVID: 005211
2014/12/30 19:52:34 5BEEF8 c Found 2 ECMpids and 3 STREAMpids in PMT
2014/12/30 19:52:34 5BEEF8 c [DVBAPI] Receiver wants to demux srvid 0065 on adapter 0000 camask 0008 index 0003 pmtpid 0101
2014/12/30 19:52:34 5BEEF8 c New program number: 0065 (0100:0065 unknown) [pmt_list_management 3]
2014/12/30 19:52:34 5BEEF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/30 19:52:34 5BEEF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/12/30 19:52:35 5BEEF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/30 19:52:35 5BEEF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/12/30 19:52:35 5BEEF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/30 19:52:36 5BEEF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/12/30 19:52:36 5BEEF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/30 19:52:36 5BEEF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/12/30 19:52:36 5BEEF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/30 19:52:37 5BEEF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!
2014/12/30 19:52:37 5BEEF8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/12/30 19:52:37 5BEEF8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 2 ecmpids!

 

[dodo83]

AW: Oscam und Meo card

configs dazu?
welche OScam Version?
wenn neuere, CARDMHZ auf 2700 getestet?

 

[lala50]

AW: Oscam und Meo card

OK
config:

Spoiler

# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r1014
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[global]
logfile = /tmp/oscam.log
clienttimeout = 20000
fallbacktimeout = 500
clientmaxidle = 1000
nice = -1
maxlogsize = 50
waitforcards_extra_delay = 150
preferlocalcards = 1
dropdups = 1
block_same_ip = 0
block_same_name = 0
suppresscmd08 = 1

[cs357x]
port = 4567

[newcamd]
port = 27000@098c:000000;24000@0100:005211,005221,005225
allowed = 127.0.0.1,
key = 0102030405060708091011121314
keepalive = 1

[radegast]
port = xxx
serverip = 127.0.0.1
allowed = 127.0.0.1
user = linhar

[cccam]
port = xxx
nodeid = 1F933151105613CE
version = 2.3.0
reshare = 2
forward_origin_card = 1

[monitor]
port = 988
aulow = 120
monlevel = 1
hideclient_to = 15

[webif]
httpport = 8088
httpuser = oscam
httppwd = user
httprefresh = 10
httpshowecminfo = 1
httpallowed = 192.168.0.0-192.168.255.255
aulow = 120
httpsavefullcfg = 0
httpreadonly = 0
hideclient_to = 15

[dvbapi]
enabled = 1
au = 1
delayer = 1
user = local
boxtype = dreambox

server:

Spoiler

[reader]
label = v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1,2
emmcache = 1,3,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

[reader]
enable = 1
label = meo
protocol = internal
device = /dev/sci1
caid = 0100
detect = cd
mhz = 600
cardmhz = 369
group = 1
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 1
blockemm-g = 1
saveemm-s = 1
lb_weight = 300

user:

Spoiler

[account]
user = local
monlevel = 4
au = v14
group = 1


[account]
user = local
description = DVBAPI
uniq = 1
group = 1,2
au = meo

 

[bombadil]

AW: Oscam und Meo card

Hi,

laut Titel geht es um die meo Card. Die kenne ich nicht. Du solltest aber trotzdem mal dieses anpassen, wie der Reader in der Dreambox angesprochen werden muss.

mhz = 600
cardmhz = 369

Schau mal ins WebIf, da stehen Beispiele.

Grüße
Bombadil

 

[lala50]

AW: Oscam und Meo card

Danke , aber habe ich schon versuchgt, leider ohne erfolg.

 

[bombadil]

AW: Oscam und Meo card

Was hast du versucht? Zeige mal die Konfig dazu. Was ist das für eine Karte? Welche Verschlüsselung?

 

[lala50]

AW: Oscam und Meo card

#bombadil#
configs sind obem #3

 

[dodo83]

AW: Oscam und Meo card

welche OScam Version?
was ist die Hardware?

 

[fun7]

AW: Oscam und Meo card

cardmhz = 2700
mhz = 357

für MEO, ist eine ganz normale Seca V10

 

[bombadil]

AW: Oscam und Meo card

Das habe ich gesehen. Hast du auch das getestet, was im WebIf des Oscam beim Reader steht? Das meinte ich.

Cardmhz = 2700
mhz = 1

 

[lala50]

AW: Oscam und Meo card

cardmhz = 2700
mhz = 357

für MEO, ist eine ganz normale Seca V10

Mit dieser einstellung, funz. Danke.