OSCAM schreibt keine EMM's

[xola766]

Hi Leute,

ich habe hier eine Reelbox mit OSCAM Version 1.20 Build 10734. Problem ist, dass die EMM's nicht geloggt werden. Vermutlich liegt das an der Reelbox, da diese nicht über das lokale DVBAPI auf OSCAM zugreift, sondern über CAMD3, was aber wohl bei der Reelbox nicht anders geht. Kann mir jemand einen Tipp geben, was ich ändern könnte, damit die EMM's geloggt werden?

Config ist wie folgt:

oscam.conf:

Spoiler

[global]
logfile = /var/cache/oscam.log
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
nice = -1
maxlogsize = 1024
preferlocalcards = 1

[cache]
delay = 120
max_time = 18

[cs357x]
port = 20197

[dvbapi]
enabled = 1
au = 1
user = local
boxtype = pc

[webif]
httpport = 8888
httpuser = xxx
httppwd = xxx
httprefresh = 10
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.168.0.1-192.168.0.255
httpemmsclean = 0
aulow = 120

oscam.user:

Spoiler

[account]
user = local
au = 1
group = 1

[account]
user = vdr-sc
pwd = vdr-sc
au = 1
group = 1

oscam.server:

Spoiler

[reader]
label = V14
protocol = smargo
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
mhz = 369
cardmhz = 369
group = 1
emmcache = 1,1,10,0
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.dvbapi:

Spoiler

P: 098C
I: 0

Danke und viele Grüße,
xola766

 

[joopastron]

AW: OSCAM schreibt keine EMM's

Hi

Schaut soweit gut aus, eine andere Oscam Rev. hast Du schon getestet ?


Gesendet von iPhone mit Tapatalk

 

[xola766]

AW: OSCAM schreibt keine EMM's

Nein, leider ist es da so, dass es nur ganz wenige Versionen gibt. Das scheint die stabilste zu sein.

Gruß, xola766

 

[pehedima]

AW: OSCAM schreibt keine EMM's

Poste doch mal die die oscam.log vom oscam Start an bis zum Client-Zugriff.


Gesendet von meiner Handquetsche

 

[xola766]

AW: OSCAM schreibt keine EMM's

Hier die Log-Datei:

Spoiler

-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Sep 18 13:54:45 2015
-------------------------------------------------------------------------------
2015/09/18 13:54:45 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10734 (i486-linux-gnu)
2015/09/18 13:54:45 0 s (main) System name = Linux
2015/09/18 13:54:45 0 s (main) Host name = ReelBox
2015/09/18 13:54:45 0 s (main) Release = 2.6.32-36-generic
2015/09/18 13:54:45 0 s (main) Version = #79-Ubuntu SMP Tue Nov 8 22:29:26 UTC 2011
2015/09/18 13:54:45 0 s (main) Machine = i686
2015/09/18 13:54:45 0 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 5755
2015/09/18 13:54:45 0 s (config) userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2015/09/18 13:54:45 0 s (main) signal handling initialized
2015/09/18 13:54:45 0 s (config) 194 service-id's loaded in 3 ms
2015/09/18 13:54:45 0 s (net) cs357x: initialized (fd=5, port=20197)
2015/09/18 13:54:45 0 s (reader) V14 [smargo] creating thread for device /dev/ttyUSB0
2015/09/18 13:54:45 0 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2015/09/18 13:54:45 0 s (main) waiting for local card init
2015/09/18 13:54:45 95232E8 h (webif) webif: decompressed 162186 bytes back into 386848 bytes
2015/09/18 13:54:45 95232E8 h (webif) HTTP Server running. ip=0.0.0.0 port=8888
2015/09/18 13:54:45 8522A10 r (reader) V14 [smargo] Buffers readed 0 bytes total time_us 75461
2015/09/18 13:54:45 8522A10 r (reader) V14 [smargo] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz= AUTO, cardmhz=369)
2015/09/18 13:54:46 8522A10 r (reader) V14 [smargo] card detected
2015/09/18 13:54:50 8522A10 r (reader) V14 [smargo] ATR: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2015/09/18 13:54:50 8522A10 r (reader) V14 [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2015/09/18 13:54:50 8522A10 r (reader) V14 [smargo] Calculated work ETU is 17.42 us reader mhz = 534
2015/09/18 13:54:50 8522A10 r (reader) V14 [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2015/09/18 13:54:52 8522A10 r (reader) V14 [smargo] Card type: P1TV
2015/09/18 13:54:52 8522A10 r (reader) V14 [smargo] Rom version: 20AA
2015/09/18 13:54:52 8522A10 r (reader) V14 [smargo] Credit available on card: 0 euro
2015/09/18 13:54:52 8522A10 r (reader) V14 [smargo] Extended 4C detected
2015/09/18 13:54:52 8522A10 r (reader) V14 [smargo] FuseByte: 05
2015/09/18 13:54:52 8522A10 r (reader) V14 [smargo] Region Code: 00BO0102
2015/09/18 13:54:52 8522A10 r (reader) V14 [smargo] Country Code: DEU
2015/09/18 13:54:53 8522A10 r (reader) V14 [smargo] Pincode read: 0000
2015/09/18 13:54:53 8522A10 r (reader) V14 [smargo] PCB settings: FF FF FF FF
2015/09/18 13:54:53 8522A10 r (reader) V14 [smargo] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
2015/09/18 13:54:53 8522A10 r (reader) V14 [smargo] serial: ########, BoxID: ########, baseyear: 2004
2015/09/18 13:54:53 8522A10 r (reader) V14 [smargo] ready for requests
2015/09/18 13:54:53 8522A10 r (reader) V14 [smargo] found card system videoguard2
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] card detected
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] ------------------------------------------------------------------
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |- class -|-- tier --|----- valid to ------|--- package name ----|
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] +---------+----------+---------------------+---------------------+
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 007b --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 007c --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 007e --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 007f --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 0081 --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 0082 --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 008e --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 0087 --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 008f --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 00f0 --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 00fa --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 00f3 --| 2015/09/19-01:00:00 |
2015/09/18 13:54:53 8522A10 r (reader) V14 [videoguard2] |-- 00 ---|-- 00ff --| 2015/09/19-01:00:00 |
2015/09/18 13:54:54 8522A10 r (reader) V14 [videoguard2] ------------------------------------------------------from-ins70--
2015/09/18 13:54:55 0 s (main) init for all local cards done
2015/09/18 13:54:55 0 s (emmcache) loaded 0 emmcache records from /tmp/.oscam/oscam.emmcache in 0 ms
2015/09/18 13:54:55 0 s (emmcache) loaded 0 emmstat records from /tmp/.oscam/oscam.emmstat in 0 ms
2015/09/18 13:54:55 0 s (anticasc) anti cascading disabled
2015/09/18 13:54:55 952EF40 c (client) encrypted cs357x-client 127.0.0.1 granted (vdr-sc, au=auto (1 reader))
2015/09/18 13:54:55 852E020 c (client) plain dvbapi-client granted (vdr-sc, au=auto (1 reader))
2015/09/18 13:54:55 852E020 c (dvbapi) dvbapi channelcache loaded from /etc/vdr/plugins/oscam/conf/oscam.ccache
2015/09/18 13:54:55 852E020 c (dvbapi) Using /tmp/camd.socket listen socket, API forced to DVBAPIv3 (0), userconfig boxtype: 11
2015/09/18 13:54:55 952EF40 c (camd35) vdr-sc emm-request sent (reader=V14, caid=098C, auprovid=000000)
2015/09/18 13:54:55 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): found (326 ms) by V14 - Buli
2015/09/18 13:54:55 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): cache2 (327 ms) by V14 - Buli
2015/09/18 13:54:55 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): found (289 ms) by V14 - Buli
2015/09/18 13:55:01 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): found (287 ms) by V14 - Buli
2015/09/18 13:55:08 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): found (290 ms) by V14 - Buli
2015/09/18 13:55:15 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): found (290 ms) by V14 - Buli
2015/09/18 13:55:22 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): found (288 ms) by V14 - Buli
2015/09/18 13:55:29 952EF40 c (ecm) vdr-sc (098C&000000/019A/00DF/98:00000000000000000000000000000000): found (292 ms) by V14 - Buli

Gruß, xola766

 

[webman2]

AW: OSCAM schreibt keine EMM's

Mir fällt diese Zeile in Deinem log auf.
015/09/18 13:54:50 8522A10 r (reader) V14 [smargo] ATR: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Die Zeile sollte bei einer V14 das folgende Aussehen haben:
ATR: 3F FD 13 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03

Hast Du die Ausgabe im log auch im Web-IF unter READERS ?

 

[janni1]

AW: OSCAM schreibt keine EMM's

Hi,
@webman2
ich denke, den ATR hat wohl der TE selber genullt, genau so wie den ECM-Hash.

Im Moment ist es laut Log so, dass sich die Box zweimal bei oscam meldet.
Einmal über Camd3

c (client) encrypted cs357x-client 127.0.0.1 granted (vdr-sc, au=auto (1 reader))

und einmal über die Dvbapi

c (client) plain dvbapi-client granted (vdr-sc, au=auto (1 reader))

Ich würde erstmal nur eins von beiden versuchen.

Gruß
janni1

 

[xola766]

AW: OSCAM schreibt keine EMM's

Hab ich jetzt mal umgestellt. Mal sehen was kommt...

ATR und ECM-Hash habe ich genullt. Ich dachte da steht vielleicht was verdächtiges drin. :emoticon-0111-blush

Gruß, xola766

 

[xola766]

AW: OSCAM schreibt keine EMM's

Kommen leider keine EMM's bzw. werden nicht geloggt. Was kann ich ändern damit das geht?

Gruß, xola766