OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

[4gx35]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

ist wohl das ducktrick image, dann im dvbapi abschnitt boxtype = duckbox ?
iltv funktionierte auch bei mir mit anderen edision boxen einwandfrei

 

[Pilot]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

vollkommen korrekt

mein [webif] Abschnitt im oscam.cof:
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = duckbox

teste auch das beim reader:

Spoiler

[reader]
label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 600
cardmhz = 357
autospeed = 0
group = 1
emmcache = 1,3,2

hab das von hier:. Änderung der mhz Zahl

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hey,

also mit der ILTV kommt "Videoguard: no right to watch this program"

Im Originalen KD Receiver läuft aber alles.

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

So sieht das log mit deinem reader aus.

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Wed Aug 6 23:35:14 2014
-------------------------------------------------------------------------------
2014/08/06 23:35:14 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r1075 (sh4-streamboard-linux-gnu-stapi-libusb)
2014/08/06 23:35:14 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 1843
2014/08/06 23:35:14 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/06 23:35:14 0 s signal handling initialized
2014/08/06 23:35:14 0 s skydeG09 [internal] creating thread for device /dev/sci0
2014/08/06 23:35:14 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/06 23:35:14 0 s waiting for local card init
2014/08/06 23:35:14 597D50 r skydeG09 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=600, cardmhz=357)
2014/08/06 23:35:14 59D508 h webif: decompressed 108671 bytes back into 274076 bytes
2014/08/06 23:35:14 59D508 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/06 23:35:15 597D50 r skydeG09 [internal] card detected
2014/08/06 23:35:15 597D50 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/06 23:35:15 597D50 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/06 23:35:15 597D50 r skydeG09 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/08/06 23:35:16 597D50 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/08/06 23:35:17 597D50 r skydeG09 [internal] card system not supported
2014/08/06 23:35:17 597D50 r skydeG09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/06 23:35:18 597D50 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/06 23:35:18 597D50 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/06 23:35:18 597D50 r skydeG09 [internal] Calculated work ETU is 62.00 us reader mhz = 600
2014/08/06 23:35:18 597D50 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 6.00 (specified in reader->mhz)
2014/08/06 23:35:20 597D50 r skydeG09 [internal] card system not supported
2014/08/06 23:35:20 597D50 r skydeG09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/06 23:35:20 597D50 r skydeG09 [internal] card initializing error
2014/08/06 23:35:20 0 s init for all local cards done
2014/08/06 23:35:20 5A0A38 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/08/06 23:35:20 5A0A38 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/08/06 23:35:25 5A0A38 c [ADD PID 0] CAID: 1834 ECM_PID: 1C0F PROVID: 000000
2014/08/06 23:35:25 5A0A38 c [ADD PID 1] CAID: 09C7 ECM_PID: 1D0F PROVID: 000000
2014/08/06 23:35:25 5A0A38 c [ADD PID 2] CAID: 1861 ECM_PID: 190F PROVID: 000000
2014/08/06 23:35:25 5A0A38 c Found 3 ECMpids and 3 STREAMpids in PMT
2014/08/06 23:35:25 5A0A38 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
2014/08/06 23:35:25 5A0A38 c New program number: 006C (1834:006C unknown) [pmt_list_management 3]
2014/08/06 23:35:25 5A0A38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 23:35:25 5A0A38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 23:35:25 5A0A38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 23:35:25 5A0A38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 23:35:26 5A0A38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 23:35:26 5A0A38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 23:35:26 5A0A38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 23:35:27 5A0A38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 23:35:27 5A0A38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 23:35:27 5A0A38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 23:35:28 5A0A38 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 23:35:28 5A0A38 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Also, ich bekomme es einfach nicht hin. Ich werde den VIP2 jetzt einfach im Schlafzimmer als client benutzen.

Danke euch für eure Bemühungen!

Eine Frage habe ich jetzt noch. Funktioniert dieser WLAN Stick?

Sie müssen registriert sein, um Links zu sehen

 

[Pilot]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

letzer Versuch von mir. teste es damit

Spoiler

[reader]
label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 357
autospeed = 0
group = 1
emmcache = 1,3,2

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hey,

jetzt habe ich die DM800se mit oozoon Image drauf.
Ich habe aber noch immer das gleiche Problem.

Logfile

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Sat Aug 9 15:36:25 2014
-------------------------------------------------------------------------------
2014/08/09 15:36:25 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9663 (mipsel-unknown-linux-gnu)
2014/08/09 15:36:25 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3523
2014/08/09 15:36:25 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/09 15:36:25 0 s signal handling initialized
2014/08/09 15:36:25 0 s G09 [internal] creating thread for device /dev/sci0
2014/08/09 15:36:25 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/09 15:36:25 0 s waiting for local card init
2014/08/09 15:36:25 72B438 r G09 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357)
2014/08/09 15:36:25 725C58 h webif: decompressed 150518 bytes back into 364064 bytes
2014/08/09 15:36:25 725C58 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/09 15:36:26 72B438 r G09 [internal] card detected
2014/08/09 15:36:27 72B438 r G09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/09 15:36:27 72B438 r G09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/09 15:36:27 72B438 r G09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/09 15:36:27 72B438 r G09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/09 15:36:29 72B438 r G09 [internal] card system not supported
2014/08/09 15:36:29 72B438 r G09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/09 15:36:30 72B438 r G09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/09 15:36:30 72B438 r G09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/09 15:36:30 72B438 r G09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/09 15:36:30 72B438 r G09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/09 15:36:32 72B438 r G09 [internal] card system not supported
2014/08/09 15:36:32 72B438 r G09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/09 15:36:32 72B438 r G09 [internal] card initializing error
2014/08/09 15:36:32 0 s init for all local cards done
2014/08/09 15:36:32 0 s anti cascading disabled
2014/08/09 15:36:32 72E140 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/08/09 15:36:32 72E140 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/08/09 15:36:35 72E140 c [DVBAPI] Receiver sends PMT command 3 for channel 0081
2014/08/09 15:36:35 72E140 c [DVBAPI] Receiver wants to demux srvid 0081 on adapter 0000 camask 0008 index 0003 pmtpid 0062
2014/08/09 15:36:35 72E140 c [ADD PID 0] CAID: 1834 ECM_PID: 1CBA PROVID: 000000
2014/08/09 15:36:35 72E140 c [ADD PID 1] CAID: 09C7 ECM_PID: 1DBA PROVID: 000000
2014/08/09 15:36:35 72E140 c [ADD PID 2] CAID: 1861 ECM_PID: 19BA PROVID: 000000
2014/08/09 15:36:35 72E140 c Found 3 ECMpids and 5 STREAMpids in PMT
2014/08/09 15:36:35 72E140 c [DVBAPI] Receiver wants to demux srvid 0081 on adapter 0000 camask 0008 index 0003 pmtpid 0062
2014/08/09 15:36:35 72E140 c New program number: 0081 (1834:0081 unknown) [pmt_list_management 3]
2014/08/09 15:36:35 72E140 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/09 15:36:35 72E140 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/09 15:36:36 72E140 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/09 15:36:36 72E140 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/09 15:36:36 72E140 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/09 15:36:36 72E140 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/09 15:36:37 72E140 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/09 15:36:37 72E140 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/09 15:36:37 72E140 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/09 15:36:38 72E140 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/09 15:36:38 72E140 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/09 15:36:38 72E140 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/09 15:36:39 72E140 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/09 15:36:39 72E140 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

oscam.conf

Spoiler

[global]logfile = /tmp/oscam.log;stdout
nice = -1
maxlogsize = 256
preferlocalcards = 1
ecmfmt = c/s/l 1




[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox




[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
aulow = 120

oscam.user

Spoiler

[account]user = local
group = 1
au = 1

oscam.server

Spoiler

label = G09
enable = 1
protocol = internal
device = /dev/sci1
caid = 09C7
boxid = 12345678
detect = cd
group = 2
emmcache = 1,3,2
lb_weight = 100
cardmhz = 357
mhz = 357

ich bin langsam echt am verzweifeln.

 

[dodo83]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

hi
auf der dream sollte auf jeden fall die cardmhz so stehen bei neuen Oscam versionen

[COLOR=#333333]cardmhz = 2700[/COLOR]
[COLOR=#333333]mhz = 1[/COLOR]

autospeed ist ja default an

 

[Ducktrick]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

also ich hätte da auch noch nen reader für den argus den du mal testen kannst wenn du willst...

label                         = G09
protocol                      = internal
device                        = /dev/sci0
boxid                         = 12345678                    
#caid                          = 09C7
detect                        = cd
mhz                           = 500
cardmhz                       = 368
group                         = 1
emmcache                      = 1,1,2

die caid angabe ist nicht nötig die findet die karte selber raus, hatten auch öfter das das angeben des caid das init versaut hat, was mit jeder oscam aber wieder anders war, drum einfach weg lassen, das gleiche dann am besten auch nochmal fals es nicht geht mit cardmhz = 357, 368 hattet ihr nicht versucht soweit ich gesehen habt, und wenn wir von der annahme mit der fehlenden spannung ausgehen setzen wir den tackt höher an womit das eventuell ausgeglichen wird denn die hd+ laufen ja auch mit 368

Ach und was die oscam version angeht so laufen eigentlich die oscam_emu sowie die oscam_unstable oder oscam-8395 vom feed Problemlos mit den readern zusammen

Der boxtype muss beim argus im übrigen definitiv duckbox sein ( boxtype = duckbox )