OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

[fraxan]

Hallo zusammen,

ich bekomme meine G09 Karte im Edision Argus VIP2 einfach nicht zum laufen.

Mein Reader sieht so aus:

Spoiler

[reader]label            = G09_sky_kd
protocol                 = internal
device                   = /dev/sci0
showcls                  = 0
caid                     = 09C7
boxid                    = 12345678
detect                   = cd
mhz                      = 357
cardmhz                  = 357
lb_weight                = 100
ns7e11                   = 13
group                    = 3
emmcache                 = 1,3,2

Meine OSCAM Version ist die "OSCAM 1.20-EMU-HDSC build #60-9053"

Das Logfile sieht so aus:

Spoiler

2014/08/04 20:42:05 5551E0 r G09_sky_kd [internal] creating thread for device /dev/sci0 2014/08/04 20:42:05 503A08 r G09_sky_kd [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=500, cardmhz=357) 
2014/08/04 20:42:05 503A08 r G09_sky_kd [internal] card detected 
2014/08/04 20:42:07 503A08 r G09_sky_kd [internal] ATR: xxx... 
2014/08/04 20:42:07 503A08 r G09_sky_kd [internal] Init card protocol T0, FI=1, F=372, D=1, N=2 
2014/08/04 20:42:07 503A08 r G09_sky_kd [internal] Calculated work ETU is 74.40 us reader mhz = 500 
2014/08/04 20:42:09 503A08 r G09_sky_kd [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 
2014/08/04 20:42:12 503A08 r G09_sky_kd [internal] card system not supported 
2014/08/04 20:42:12 503A08 r G09_sky_kd [internal] Normal mode failed, reverting to Deprecated Mode 
2014/08/04 20:42:13 503A08 r G09_sky_kd [internal] ATR: xxx... 
2014/08/04 20:42:13 503A08 r G09_sky_kd [internal] Init card protocol T0, FI=1, F=372, D=1, N=2 
2014/08/04 20:42:13 503A08 r G09_sky_kd [internal] Calculated work ETU is 74.40 us reader mhz = 500 
2014/08/04 20:42:15 503A08 r G09_sky_kd [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz) 
2014/08/04 20:42:18 503A08 r G09_sky_kd [internal] card system not supported 
2014/08/04 20:42:18 503A08 r G09_sky_kd [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1 
2014/08/04 20:42:18 503A08 r G09_sky_kd [internal] card initializing error

Ich habe schon alles versucht. Liegt das vielleicht am internen Reader des Receivers?

Bin über jeden Tipp dankbar.

Gruß

Ich habe jetzt die Konfigurationsdateien mal auf das Minimum reduziert.

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
disableuserfile = 0
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
cachedelay = 120
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1
saveinithistory = 1
[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.1.1-192.168.255.255

oscam.server

Spoiler

[reader]
label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

oscam.user

Spoiler

[account]
user = local
group = 1
au = 1

Logfile

Spoiler

2014/08/04 21:57:14 508DB0 r skydeG09 [internal] card detected
2014/08/04 21:57:17 508DB0 r skydeG09 [internal] ATR: xxx...
2014/08/04 21:57:17 508DB0 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/04 21:57:17 508DB0 r skydeG09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/04 21:57:21 508DB0 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/04 21:57:24 508DB0 r skydeG09 [internal] card system not supported
2014/08/04 21:57:24 508DB0 r skydeG09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/04 21:57:26 508DB0 r skydeG09 [internal] ATR: xxx...
2014/08/04 21:57:26 508DB0 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/04 21:57:26 508DB0 r skydeG09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/04 21:57:29 508DB0 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/04 21:57:32 508DB0 r skydeG09 [internal] card system not supported
2014/08/04 21:57:32 508DB0 r skydeG09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/04 21:57:32 508DB0 r skydeG09 [internal] card initializing error

Funktioniert leider nicht.
Ich habe schon beide Kartenleser ausprobiert, jedesmal das gleiche Problem.

Gruß

 

[bombadil]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hi,

lass mal das leer

mhz = 357

und den ATR bitte nicht ausxxen. Dann ein neues Log

Grüße
Bombadil

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hey, danke schon mal für die Antwort. Leider funktioniert es noch nicht.

oscam.server

Spoiler

[reader]label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
mhz =
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

Logfile

Spoiler

2014/08/04 22:36:18 546758 c New program number: 2B5C (0000:2B5C unknown) [pmt_list_management 3] 2014/08/04 22:36:30 5035D8 r skydeG09 [internal] card detected
2014/08/04 22:36:32 5035D8 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/04 22:36:32 5035D8 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/04 22:36:32 5035D8 r skydeG09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/04 22:36:34 5035D8 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/04 22:36:37 5035D8 r skydeG09 [internal] card system not supported
2014/08/04 22:36:37 5035D8 r skydeG09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/04 22:36:38 5035D8 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/04 22:36:38 5035D8 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/04 22:36:38 5035D8 r skydeG09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/04 22:36:40 5035D8 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/04 22:36:43 5035D8 r skydeG09 [internal] card system not supported
2014/08/04 22:36:43 5035D8 r skydeG09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/04 22:36:43 5035D8 r skydeG09 [internal] card initializing error

Wenn ich zb.auf ProSieben HD schalte, dann sieht das log so aus:

2014/08/04 22:42:12 545648 c [ADD PID 0] CAID: 09C7 ECM_PID: 1AC1 PROVID: 0000002014/08/04 22:42:12 545648 c [ADD PID 1] CAID: 1861 ECM_PID: 1ABD PROVID: 000000
2014/08/04 22:42:12 545648 c [ADD PID 2] CAID: 1834 ECM_PID: 1AC0 PROVID: 000000
2014/08/04 22:42:12 545648 c Found 3 ECMpids and 4 STREAMpids in PMT
2014/08/04 22:42:12 545648 c [DVBAPI] Receiver wants to demux srvid C35F on adapter 0000 camask 0001 index 0000
2014/08/04 22:42:12 545648 c New program number: C35F (09C7:C35F unknown) [pmt_list_management 3]
2014/08/04 22:42:12 545648 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/04 22:42:12 545648 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

 

[bombadil]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hi,

ändere erst mal caid auf 09C7. und lass auch mal cardmhz leer.

Grüße
Bombadil

 

[Pilot]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

https://www.digital-eliteboard.com/...x-vips-mit-ducktrick-image-6.html#post2325786

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Guten Morgen,

ich werde das heute Abend mal ausprobieren.

Sorry für die blöde Frage, aber wie installiere ich die Datei. Meine akutuelle OSCAM Version habe ich einfach über das Receivermenü installiert.

 

[bombadil]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Moin,

Oscam stoppen, die Datei umbenennen und sichern. Die neue Oscam wie die alte benennen und per FTP auf den Server schieben. Rechte auf 755 und Oscam neu starten.


Grüße
Bombadil

Tapa-Talking by Eifön

 

[Pilot]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Sorry für die blöde Frage, aber wie installiere ich die Datei.

Mit einem FTP Programm. Ich nehme File Zilla Cliet dazu:Link ist nicht mehr aktiv.
Login: root und argus
Pfad ist var/emu sein.
Links = Ort auf dem PC.
Rechts= Ort auf dem Receiver.

Die alte oscam Version stoppen. Dann in Fille Zilla Client löschen.
Neue Version herüberschieben nach var/emu. Mit rechter moustaste anlicken. Auf Eigenschaften gehen. Rechte auf 755 setzen.
oscam neu starten

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hallo,

also die andere oscam Version habe ich soeben installiert, leider funktionier es noch nicht.

Mein Logfile sieht so aus:

Spoiler

2014/08/05 18:44:38 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r1075 (sh4-streamboard-linux-gnu-stapi-libusb)2014/08/05 18:44:38 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2808
2014/08/05 18:44:38 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/05 18:44:38 0 s signal handling initialized
2014/08/05 18:44:38 0 s skydeG09 [internal] creating thread for device /dev/sci0
2014/08/05 18:44:38 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/05 18:44:38 0 s waiting for local card init
2014/08/05 18:44:38 597D40 r skydeG09 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/08/05 18:44:38 599A08 h webif: decompressed 108671 bytes back into 274076 bytes
2014/08/05 18:44:38 599A08 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/05 18:44:39 597D40 r skydeG09 [internal] card detected
2014/08/05 18:44:41 597D40 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/05 18:44:41 597D40 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/05 18:44:41 597D40 r skydeG09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/05 18:44:43 597D40 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/05 18:44:45 597D40 r skydeG09 [internal] card system not supported
2014/08/05 18:44:45 597D40 r skydeG09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/05 18:44:47 597D40 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/05 18:44:47 597D40 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/05 18:44:47 597D40 r skydeG09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/05 18:44:49 597D40 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/05 18:44:50 597D40 r skydeG09 [internal] card system not supported
2014/08/05 18:44:50 597D40 r skydeG09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/05 18:44:50 597D40 r skydeG09 [internal] card initializing error
2014/08/05 18:44:51 0 s init for all local cards done
2014/08/05 18:44:51 59FBD0 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/08/05 18:44:51 59FBD0 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/08/05 18:44:54 59FBD0 c [ADD PID 0] CAID: 1834 ECM_PID: 1C0F PROVID: 000000
2014/08/05 18:44:54 59FBD0 c [ADD PID 1] CAID: 09C7 ECM_PID: 1D0F PROVID: 000000
2014/08/05 18:44:54 59FBD0 c [ADD PID 2] CAID: 1861 ECM_PID: 190F PROVID: 000000
2014/08/05 18:44:54 59FBD0 c Found 3 ECMpids and 3 STREAMpids in PMT
2014/08/05 18:44:54 59FBD0 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
2014/08/05 18:44:54 59FBD0 c New program number: 006C (1834:006C unknown) [pmt_list_management 3]
2014/08/05 18:44:54 59FBD0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/05 18:44:54 59FBD0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
disableuserfile = 0
clienttimeout = 15000
fallbacktimeout = 4900
clientmaxidle = 60
bindwait = 20
netprio = 0
nice = -1
maxlogsize = 100
preferlocalcards = 1
[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = local
pmt_mode = 0
[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255

oscam.user

Spoiler

[account]
user = local
group = 1
au = 1

oscam.server

Spoiler

[reader]
label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz =
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

oscam.version

Spoiler

Unix starttime: 1407257078
Starttime: 05.08.2014 18:44:38
Version: oscam-1.20-unstable_svn-r1075
Compiler: sh4-streamboard-linux-gnu-stapi-libusb
ConfigDir: /var/keys/


Web interface support: yes
LiveLog support: yes
jQuery support intern: no
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: yes
DVB API with Samsung TV support: no
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no


camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: no
serial: no
constant CW: yes
Pandora: no
ghttp: no


Reader support: yes


Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes


cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stinger: no

Danke schon mal bis hier. :-D

 

[dodo83]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

setze mal

[COLOR=#333333]mhz = [/COLOR]
[COLOR=#333333]cardmhz = 2700[/COLOR]

und starte oscam neu

oder

[COLOR=#333333]mhz = 357
[/COLOR]autospeed = 0
[COLOR=#333333]cardmhz = 2700[/COLOR]

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hi,

also mit

[COLOR=#333333]mhz = [/COLOR]
[COLOR=#333333]cardmhz = 2700[/COLOR]

kommt Das hier raus:

Spoiler

2014/08/05 20:50:33 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 203952014/08/05 20:50:33 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/05 20:50:33 0 s signal handling initialized
2014/08/05 20:50:33 0 s skydeG09 [internal] creating thread for device /dev/sci0
2014/08/05 20:50:33 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/05 20:50:33 0 s waiting for local card init
2014/08/05 20:50:33 597D40 r skydeG09 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/08/05 20:50:33 599A08 h webif: decompressed 108671 bytes back into 274076 bytes
2014/08/05 20:50:33 599A08 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/05 20:50:34 597D40 r skydeG09 [internal] card detected
2014/08/05 20:50:37 597D40 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/05 20:50:37 597D40 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/05 20:50:37 597D40 r skydeG09 [internal] TEST tempo mhz check = 500 mhz
2014/08/05 20:50:37 597D40 r skydeG09 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/08/05 20:50:39 597D40 r skydeG09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/05 20:50:40 597D40 r skydeG09 [internal] card system not supported
2014/08/05 20:50:40 597D40 r skydeG09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/05 20:50:42 597D40 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/05 20:50:42 597D40 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/05 20:50:42 597D40 r skydeG09 [internal] TEST tempo mhz check = 500 mhz
2014/08/05 20:50:42 597D40 r skydeG09 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/08/05 20:50:44 597D40 r skydeG09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/05 20:50:46 597D40 r skydeG09 [internal] card system not supported
2014/08/05 20:50:46 597D40 r skydeG09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/05 20:50:46 597D40 r skydeG09 [internal] card initializing error
2014/08/05 20:50:47 0 s init for all local cards done
2014/08/05 20:50:47 5A0580 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/08/05 20:50:47 5A0580 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/08/05 20:50:49 5A0580 c [ADD PID 0] CAID: 1834 ECM_PID: 1C0F PROVID: 000000
2014/08/05 20:50:49 5A0580 c [ADD PID 1] CAID: 09C7 ECM_PID: 1D0F PROVID: 000000
2014/08/05 20:50:49 5A0580 c [ADD PID 2] CAID: 1861 ECM_PID: 190F PROVID: 000000
2014/08/05 20:50:49 5A0580 c Found 3 ECMpids and 3 STREAMpids in PMT
2014/08/05 20:50:49 5A0580 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
2014/08/05 20:50:49 5A0580 c New program number: 006C (1834:006C unknown) [pmt_list_management 3]
2014/08/05 20:50:49 5A0580 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/05 20:50:49 5A0580 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

und mit

[COLOR=#333333]mhz = 357
[/COLOR]autospeed = 0
[COLOR=#333333]cardmhz = 2700[/COLOR]

kommt folgendes raus:

Spoiler

2014/08/05 20:52:12 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 206322014/08/05 20:52:12 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/05 20:52:12 0 s signal handling initialized
2014/08/05 20:52:12 0 s skydeG09 [internal] creating thread for device /dev/sci0
2014/08/05 20:52:12 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/05 20:52:12 0 s waiting for local card init
2014/08/05 20:52:12 597D40 r skydeG09 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=3.57 MHz
2014/08/05 20:52:12 59D4F8 h webif: decompressed 108671 bytes back into 274076 bytes
2014/08/05 20:52:12 59D4F8 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/05 20:52:13 597D40 r skydeG09 [internal] card detected
2014/08/05 20:52:15 597D40 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/05 20:52:15 597D40 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/05 20:52:15 597D40 r skydeG09 [internal] TEST tempo mhz check = 500 mhz
2014/08/05 20:52:15 597D40 r skydeG09 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/08/05 20:52:17 597D40 r skydeG09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/05 20:52:19 597D40 r skydeG09 [internal] card system not supported
2014/08/05 20:52:19 597D40 r skydeG09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/05 20:52:21 597D40 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/05 20:52:21 597D40 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/05 20:52:21 597D40 r skydeG09 [internal] TEST tempo mhz check = 450 mhz
2014/08/05 20:52:21 597D40 r skydeG09 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2014/08/05 20:52:23 597D40 r skydeG09 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2014/08/05 20:52:24 597D40 r skydeG09 [internal] card system not supported
2014/08/05 20:52:24 597D40 r skydeG09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/05 20:52:24 597D40 r skydeG09 [internal] card initializing error
2014/08/05 20:52:25 0 s init for all local cards done
2014/08/05 20:52:25 5A0CD8 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/08/05 20:52:25 5A0CD8 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 2
2014/08/05 20:52:28 5A0CD8 c [ADD PID 0] CAID: 1834 ECM_PID: 1C0F PROVID: 000000
2014/08/05 20:52:28 5A0CD8 c [ADD PID 1] CAID: 09C7 ECM_PID: 1D0F PROVID: 000000
2014/08/05 20:52:28 5A0CD8 c [ADD PID 2] CAID: 1861 ECM_PID: 190F PROVID: 000000
2014/08/05 20:52:28 5A0CD8 c Found 3 ECMpids and 3 STREAMpids in PMT
2014/08/05 20:52:28 5A0CD8 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
2014/08/05 20:52:28 5A0CD8 c New program number: 006C (1834:006C unknown) [pmt_list_management 3]
2014/08/05 20:52:28 5A0CD8 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/05 20:52:28 5A0CD8 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

funktionier leider noch nicht.

Irgendwie sieht das doch danach aus, als ob der interne Kartenleser ein Problem hat, oder nicht?

 

[4gx35]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Link ist nicht mehr aktiv.,
beide mhz 357, autospeed und mhz 2700 funktionieren beim pingu eher nicht

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hi,

jetzt habe ich diese Version installiert: [h=1]Datenbase: oscam-svn9685-sh_4-webif-stapi[/h]
Funktionier leider noch nicht.

das log sieht so aus:

Spoiler

[h=1]

• 2014/08/06 10:10:26 59A008 r skydeG09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
• 2014/08/06 10:10:26 59A008 r skydeG09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
• 2014/08/06 10:10:26 59A008 r skydeG09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
• 2014/08/06 10:10:28 591BC0 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
• 2014/08/06 10:10:28 59A008 r skydeG09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
• 2014/08/06 10:10:28 591BC0 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!

[/h]

Warum steht da immer was von 5 MHz, wenn ich im reader 357 angebe?

oscam.server:

Spoiler

[reader]label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

Danke.

 

[bombadil]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Vielleicht will die Karte laut ATR das haben. Trage das mal im Reader so ein und starte neu.

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Habe jetzt folgendes probiert:

mhz = 357
cardmhz = 357

mhz = 500
cardmhz = 357

mhz = 357
cardmhz = 500

mhz = 500
cardmhz = 500

Keins funktioniert.