OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

[dodo83]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

hast du die Möglichkeit einen externen Reader zu testen?

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

nee, leider nicht. Ich habe mir jetzt einfach die DM800se bestellt. Ich hoffe mal, dass es damit funktioniert.

Danke für eure Bemühungen.

Trotzdem würde mich interessieren, warum das nicht funktioniert.

Wenn ich das logfile richtig interpretiere, dann wird die Karte erkannt, kann aber aus irgendeinem Grund nicht richtig gelesen werden, oder liege ich da falsch?

 

[dodo83]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

eine Easymouse zum testen wär billiger

 

[fadeaway]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Hi,
Warum steht da immer was von 5 MHz, wenn ich im reader 357 angebe?

oscam.server:

Spoiler

[reader]label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
lb_weight = 100

Danke.

Wenn nicht ausdrücklich "autospeed = 0" drin steht, is autospeed von Haus aus aktiviert. Siehste im WebIF beim Reader. Ist Haken drin...

Gruß
fadeaway

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Ich hatte irgendwann mal mit dem Booten der ILTV Probleme, deswegen habe ich Enigma2 drauf gemacht.
Ich habe damals vermutet, dass das Netzteil einen defekt hat (Anlaufstrom, oder was auch immer).
Die Karte wird ja auch leicht warm, wenn ich sie im slot reinschiebe. Vielleicht reicht der Strom nicht aus.

Ich werde es mal mit einem externen Netzteil probieren.

Oder was meint ihr dazu?

Gruß

 

[dodo83]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

probier es noch mit einer leicht älteren OScam Version wen du magst oder halt eine 8000er Version mal nehmen

Link ist nicht mehr aktiv.

 

[fraxan]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Wenn ich über die Weboberfläche autospeed ausschalte und bei

mhz = 357
cardmhz = 357

eingebe, dann steht in der oscam.server das hier:

Spoiler

[reader]label = skydeG09
protocol = internal
device = /dev/sci0
autospeed = 0
caid = 09C7
boxid = 12345678
detect = cd
group = 1
emmcache = 1,3,2

dann habe ich manuell

mhz = 357
cardmhz = 357

noch eingefügt.

Im logfile steht dann aber trotzdem was von 5 MHz, das ist doch völlig unlogisch, oder?

 

[fadeaway]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Ist auch richtig weil
mhz = 357
cardmhz = 357
autospeed = 1 #ein

als Standard von Oscam eingetragen werden. Das erscheind nicht bis was geändert wird.
Als du autospeed ausgeschalten hast stand es ja dann drin mit autospeed = 0.

War schon mal ähnlich da (so ging es bei mir):
Stell mal in der oscam.conf

boxtype = dreambox

und dann den Reader so:

Spoiler

[reader]
label = skydeG09
enable = 1
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 600
cardmhz = 2700
autospeed = 1
group = 1
emmcache = 1,3,2

 

[fraxan]

OSCAM 1.20-unstable_svn build r8707


gleiches Problem.

oscam.server aktuell

[reader]label                         = skydeG09
enable                        = 1
protocol                      = internal
device                        = /dev/sci0
caid                          = 09C7
boxid                         = 12345678
autospeed                     = 0
mhz                           = 357
cardmhz                       = 357
detect                        = cd
group                         = 1
emmcache                      = 1,3,2

Mit welche oscam Version meinst du?
Habe aktuell noch die "alte" drauf.
OSCAM 1.20-unstable_svn build r8707

mit deinen Einstellungen und dieser oscam Version: OSCAM: 1.20-unstable_svn Build: r9687
kommt folgendes raus

Spoiler

• 2014/08/06 11:29:41 593068 c plain dvbapi-client granted (local, au=auto (1 reader))
• 2014/08/06 11:29:41 593068 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2014/08/06 11:29:44 593068 c [DVBAPI] Receiver sends PMT command 3 for channel 006C
• 2014/08/06 11:29:44 593068 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
• 2014/08/06 11:29:44 593068 c [ADD PID 0] CAID: 1834 ECM_PID: 1C0F PROVID: 000000
• 2014/08/06 11:29:44 593068 c [ADD PID 1] CAID: 09C7 ECM_PID: 1D0F PROVID: 000000
• 2014/08/06 11:29:44 593068 c [ADD PID 2] CAID: 1861 ECM_PID: 190F PROVID: 000000
• 2014/08/06 11:29:44 593068 c Found 3 ECMpids and 3 STREAMpids in PMT
• 2014/08/06 11:29:44 593068 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
• 2014/08/06 11:29:44 593068 c New program number: 006C (1834:006C unknown) [pmt_list_management 3]
• 2014/08/06 11:29:44 593068 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
• 2014/08/06 11:29:44 593068 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

 

[fadeaway]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Version von letzter Woche glaube v9812.

*EDIT*
Komplettes Log nach Neustart wär informativer...

 

[4gx35]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

log ist immer wichtig vom oscam start an und wie karte gelesen wird,
dass bei card error hinterher nichts entschlüsselt wird, kann man sich ja denken,
würde mal anderes image für die box nehmen (welcher chipsatz?)

 

[fraxan]

wie finde ich den Chipsatz heraus?

also mit diesen Configs kommt sowas raus.

oscam.version

Spoiler

Unix starttime: 1407343809Starttime: 06.08.2014 18:50:09
Version: oscam-1.20-unstable_svn-r1075
Compiler: sh4-linux-libusb
ConfigDir: /var/keys/


Web interface support: yes
LiveLog support: yes
jQuery support intern: no
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
DVB API with Samsung TV support: no
Irdeto guessing: yes
Anti-cascading support: no
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Emulator support: yes
Clockfix with realtime clock: yes
IPv6 support: no


camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: no
radegast: no
serial: no
constant CW: yes
Pandora: no
ghttp: no


Reader support: yes


Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes


cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stinger: no

oscam.conf

Spoiler

[global]logfile = /var/log/oscam.log
nice = -1
maxlogsize = 256
preferlocalcards = 1
ecmfmt = c/s/l 1


[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox


[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
aulow = 120

oscam.user

Spoiler

[account]user = local
group = 1
au = 1

oscam.server

Spoiler

[reader]label = G09
protocol = internal
device = /dev/sci0
boxid = 12345678
caid = 09C7
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2

Logfile komplett

Spoiler

------------------------------------------------------------------------------->> OSCam << cardserver started at Wed Aug 6 18:50:09 2014
-------------------------------------------------------------------------------
2014/08/06 18:50:09 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r1075 (sh4-linux-libusb)
2014/08/06 18:50:09 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3434
2014/08/06 18:50:09 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2014/08/06 18:50:09 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2014/08/06 18:50:09 0 s signal handling initialized
2014/08/06 18:50:09 0 s G09 [internal] creating thread for device /dev/sci0
2014/08/06 18:50:09 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/08/06 18:50:09 0 s waiting for local card init
2014/08/06 18:50:09 4E9D50 r G09 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
2014/08/06 18:50:09 4EBA18 h webif: decompressed 108671 bytes back into 274076 bytes
2014/08/06 18:50:09 4EBA18 h HTTP Server running. ip=0.0.0.0 port=8888
2014/08/06 18:50:10 4E9D50 r G09 [internal] card detected
2014/08/06 18:50:13 4E9D50 r G09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/06 18:50:13 4E9D50 r G09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/06 18:50:13 4E9D50 r G09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/06 18:50:15 4E9D50 r G09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/06 18:50:16 4E9D50 r G09 [internal] card system not supported
2014/08/06 18:50:16 4E9D50 r G09 [internal] Normal mode failed, reverting to Deprecated Mode
2014/08/06 18:50:18 4E9D50 r G09 [internal] ATR: 3F FD 11 25 02 50 00 03 33 B0 15 69 FF 4A 50 F0 80 03 4B 4C 03
2014/08/06 18:50:18 4E9D50 r G09 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2014/08/06 18:50:18 4E9D50 r G09 [internal] Calculated work ETU is 74.40 us reader mhz = 500
2014/08/06 18:50:20 4E9D50 r G09 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
2014/08/06 18:50:22 4E9D50 r G09 [internal] card system not supported
2014/08/06 18:50:22 4E9D50 r G09 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/08/06 18:50:22 4E9D50 r G09 [internal] card initializing error
2014/08/06 18:50:23 0 s init for all local cards done
2014/08/06 18:50:23 4F2C70 c plain dvbapi-client granted (local, au=auto (1 reader))
2014/08/06 18:50:23 4F2C70 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
2014/08/06 18:50:23 4F2C70 c [ADD PID 0] CAID: 1834 ECM_PID: 1C0F PROVID: 000000
2014/08/06 18:50:23 4F2C70 c [ADD PID 1] CAID: 09C7 ECM_PID: 1D0F PROVID: 000000
2014/08/06 18:50:23 4F2C70 c [ADD PID 2] CAID: 1861 ECM_PID: 190F PROVID: 000000
2014/08/06 18:50:23 4F2C70 c Found 3 ECMpids and 3 STREAMpids in PMT
2014/08/06 18:50:23 4F2C70 c [DVBAPI] Receiver wants to demux srvid 006C on adapter 0000 camask 0001 index 0000 pmtpid 0063
2014/08/06 18:50:23 4F2C70 c New program number: 006C (1834:006C unknown) [pmt_list_management 3]
2014/08/06 18:50:23 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:23 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:24 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:24 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:24 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:25 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:25 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:25 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:25 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:26 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:26 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:26 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:27 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:27 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:27 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:28 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:28 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:28 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:29 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:29 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:29 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:29 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:30 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:30 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:30 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:31 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:31 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:31 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:32 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:32 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:32 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:33 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:33 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:33 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!
2014/08/06 18:50:34 4F2C70 c [DVBAPI] Demuxer #0 no suitable readers found that can be used for decoding!
2014/08/06 18:50:34 4F2C70 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 3 ecmpids!

Die restlichen Files sind alle leer.

 

[fadeaway]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

Trag jetzt mal
autospeed = 0
beim Reader ein.

 

[4gx35]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

es ist eher unwahrscheinlich, dass 2 readers defekt sind,
woher hast du dein image ? installiere mal ein anderes e2 image

da hat fadeaway recht, autospeed funktioniert bei dir nicht, nur für dreamboxen oder vu+

 

[Pilot]

AW: OSCAM Reader Edision Argus VIP2 Enigma2 (G09)

@4gx35: für den Edision argus VIP gibt es nur ein enigma2 Image. Und das läuft top bei mir als Client. Auch meine S02 und HD+01 werden bestens erkannt.

@fadeway: hast du die neuste Version am Laufe? 1.48

TIP: lass es mal mit Iltv starten und teste, ob du deine G09 da erst mal zum Laufen bekommst.. Vielleicht fehlen ihr EMMs.
Mit Iltv hat mein VIP alle meine Karten zum Laufen gebracht.