Oscam mitSmargo und P02 will einfach nicht

[global]
nice = -1
WaitForCards = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 150
lb_autobetatunnel = 1
logfile = /tmp/oscam.log;stdout
maxlogsize = 256

[webif]
HttpPort = 3002
HttpUser = admin
HttpPWD = oscam
httptpl = /var/tuxbox/config/
httpcss = /var/tuxbox/config/coolstream-to.css
HttpRefresh = 10
HttpAllowed = 127.0.0.1,192.168.0.1-192.168.255.255
HttpReadOnly = 1

[newcamd]
Key = 0102030405060708091011121314
Keepalive = 1
Port = 50002@1833:000000

[reader]
Label = [SKY]
Protocol = smartreader
Device = Serial:Reader 4F0B1B0
detect = CD
mhz = 600
cardmhz = 600
rsakey = 8A####
boxkey = 66####
CAID = 1702,1833
ecmwhitelist = 1702:93;1833:89
Group = 1
EMMCache = 1,3,2

[SKY]
caid=1833
provid=000000
srvid=000C,000D,000E,0010,0013,0015,0016,0017,0018 ,001A,001B,001C,001D,0022,0024,002A,0032,0034,00A8 ,0206,0008,0009,000A,000B,0014,0019,0029,002B,0203 ,0204,00FB,00FE,0105,0108,010F,0119,0123,012D,0137 ,0141,014B,0078,007B,007B,007D,006A,006B,006F,0074 ,006E,0070,0076,0071,007C,0082,0083,0084,003B,0046 ,0201,0159,0163,016D,0079,007A

[account]
User = User1
Pwd = Pass1
AU = 1
Group = 1
betatunnel = 1833.FFFF:1702

Last login: Mon Dec 31 15:53:33 on ttys000
macmini:~ user1$ /Applications/OSCam/bin/oscam ; exit;
WARNING: oscam.conf line 9 section [global] contains unknown setting 'lb_autobetatunnel=0'
14:56:04 0 s starting thread log_list_thread
14:56:04 0 s log_list_thread thread started
14:56:04 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7505 (i686-apple-darwin11-libusb)
14:56:04 0 s version=1.20-unstable_svn, build #7505, system=i686-apple-darwin11-libusb, nice=-1
14:56:04 0 s client max. idle=120 sec, debug level=0, filter_sensitive=1
14:56:04 0 s max. logsize=256 Kb, loghistorysize=4096 bytes
14:56:04 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
14:56:04 0 s services reloaded: 0 services freed, 1 services loaded, rejected 0
14:56:04 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
14:56:04 0 s signal handling initialized (type=sysv)
14:56:04 0 s ERROR: Cannot open file "/usr/local/etc/oscam.srvid" (errno=2 No such file or directory)
14:56:04 0 s ERROR: Cannot open file "/usr/local/etc/oscam.tiers" (errno=2 No such file or directory)
14:56:04 0 s ERROR: Cannot open file "/usr/local/etc/oscam.provid" (errno=2 No such file or directory)
14:56:04 0 s ERROR: Cannot open file "/usr/local/etc/oscam.guess" (errno=2 No such file or directory)
14:56:04 0 s ERROR: Cannot open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory)
14:56:04 0 s ERROR: Cannot open file "/usr/local/etc/oscam.whitelist" (errno=2 No such file or directory)
14:56:04 0 s ERROR: Cannot open file "/usr/local/etc/oscam.cacheex" (errno=2 No such file or directory)
14:56:04 0 s Starting listener 0
14:56:04 0 s monitor: disabled
14:56:04 0 s Starting listener 0
14:56:04 0 s camd35: disabled
14:56:04 0 s Starting listener 0
14:56:04 0 s cs378x: disabled
14:56:04 0 s Starting listener 0
14:56:04 0 s newcamd: initialized (fd=4, port=50002, crypted)
14:56:04 0 s -> CAID: 1835 PROVID: 000000
14:56:04 0 s Starting listener 0
14:56:04 0 s pandora: disabled
14:56:04 0 s Starting listener 0
14:56:04 0 s csp: disabled
14:56:04 0 s Starting listener 0
14:56:04 0 s radegast: disabled
14:56:04 0 s starting thread http
14:56:04 0 s http thread started
14:56:04 0 s starting thread reader check
14:56:04 0 s reader check thread started
14:56:04 0 s starting thread check
14:56:04 0 s check thread started
14:56:04 0 s p02 [smartreader] creating thread for device Serial:Reader 4F0B1B0
14:56:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
14:56:04 0 s waiting for local card init
14:56:04 82001400 h HTTP Server couldn't bind on port 3001 (errno=48 Address already in use). Not starting HTTP!
14:56:04 81012800 r p02 [smartreader] Using 0x82 as endpoint for smartreader hardware detection
14:56:05 81012800 r Found reader with serial Reader 4F0B1B0 at 250:004
14:56:05 81012800 r Found smartreader device Serial:Reader 4F0B1B0
14:56:05 81012800 r p02 [smartreader] Reader initialized (device=Serial:Reader 4F0B1B0, detect=cd, mhz=357, cardmhz=600)
14:56:05 81012800 r p02 [smartreader] card detected
14:56:11 81012800 r p02 [smartreader] ATR: 3B #############
14:56:11 81012800 r p02 [smartreader] Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
14:56:12 81012800 r p02 [smartreader] detect irdeto tunneled nagra card
14:56:12 81012800 r p02 [smartreader] rsa key configured -> using nagra mode
14:56:13 81012800 r p02 [smartreader] type: NAGRA, caid: 1833, IRD ID: ############
14:56:13 81012800 r p02 [smartreader] ProviderID: 00 00 04 01
14:56:13 81012800 r p02 [smartreader] active to: 2013/02/07 03:41
14:56:15 81012800 r p02 [smartreader] found cardsystem nagra
14:56:15 81012800 r p02 [nagra] ROM: D N A S P 1 8 1
14:56:15 81012800 r p02 [nagra] REV: D V R L 0 0
14:56:15 81012800 r p02 [nagra] SER: ############
14:56:15 81012800 r p02 [nagra] CAID: 1833
14:56:15 81012800 r p02 [nagra] Prv.ID: 00 00 04 01 (sysid)
14:56:15 81012800 r p02 [nagra] Prv.ID: 00 00 00 00
14:56:15 81012800 r p02 [nagra] ready for requests
14:56:16 0 s init for all local cards done
14:56:16 0 s anti cascading disabled

19:46:51 99805600 c user User1 authenticated successfully (eyetvCamd)
19:46:51 99805600 c AU enabled for user User1 on reader [sky]
19:47:26 99805600 c starting thread housekeeping lb stats
19:47:26 99805600 c housekeeping lb stats thread started
19:47:26 99805600 c User1 (1702&000000/0000/006B/93427): not found (4015 ms) b