Hi,
hab hier eine UFS 912 mit aktueller Firmware (2.06) und darauf läuft oscam 1.20-unstable_svn build 7456.
Allerdings wird nix entschlüsselt, der Receiver meldet nur "verschlüsselter Kanal" und das wars.
Hier mal die Configs:
oscam.conf
oscam.dvbapi
oscam.server
oscam.user
Beim Starten laufen folgende Meldungen durch:
Was läuft da schief?
Danke schonmal
hab hier eine UFS 912 mit aktueller Firmware (2.06) und darauf läuft oscam 1.20-unstable_svn build 7456.
Allerdings wird nix entschlüsselt, der Receiver meldet nur "verschlüsselter Kanal" und das wars.
Hier mal die Configs:
oscam.conf
[global]
logfile = stdout
bindwait = 10
nice = 10
[dvbapi]
enabled = 1
user = dvbapi
boxtype = ufs910
[webif]
httpport = 15004
httpuser = webif
httppwd = webif
httphelplang = de
httprefresh = 15
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
logfile = stdout
bindwait = 10
nice = 10
[dvbapi]
enabled = 1
user = dvbapi
boxtype = ufs910
[webif]
httpport = 15004
httpuser = webif
httppwd = webif
httphelplang = de
httprefresh = 15
httpallowed = 192.168.0.0-192.168.255.255,127.0.0.1
oscam.dvbapi
S: PTI0 pmt_PTI0.tmp
S: PTI1 pmt_PTI2.tmp
S: PTI2 pmt_PTI2.tmp
S: PTI2 pmt_PTI1.tmp
# ORF
P: 0D05:000000
# Sky Deutschland
P: 09c4:000000 1 ## Sky HD V13
# *** ignores ***
I: 0
S: PTI1 pmt_PTI2.tmp
S: PTI2 pmt_PTI2.tmp
S: PTI2 pmt_PTI1.tmp
# ORF
P: 0D05:000000
# Sky Deutschland
P: 09c4:000000 1 ## Sky HD V13
# *** ignores ***
I: 0
oscam.server
[reader]
label = ccc
protocol = cccam
device = xxx,1234
user = xxx
password = xxx
group = 1
cccversion = 2.0.11
label = ccc
protocol = cccam
device = xxx,1234
user = xxx
password = xxx
group = 1
cccversion = 2.0.11
oscam.user
[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 0
user = dvbapi
pwd = dvbapi
group = 1
au = 0
Beim Starten laufen folgende Meldungen durch:
06:42:41 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #7456 (sh4-linux-stapi)
06:42:41 0 s version=1.20-unstable_svn, build #7456, system=sh4-linux-stapi, nice=10
06:42:41 0 s client max. idle=120 sec, debug level=128, filter_sensitive=1
06:42:41 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
06:42:41 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
06:42:43 0 s ERROR: Cannot open file "/data/oscam/oscam.services" (errno=2 No such file or directory)
06:42:44 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
06:42:44 0 s signal handling initialized (type=sysv)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.srvid" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.tiers" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.provid" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.guess" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.whitelist" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.cacheex" (errno=2 No such file or directory)
06:42:44 0 s Starting listener 0
06:42:44 0 s monitor: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s camd35: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s cs378x: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s newcamd: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s pandora: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s csp: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s radegast: disabled
06:42:44 0 s starting thread http
06:42:44 0 s http thread started
06:42:44 0 s starting thread reader check
06:42:46 0 s reader check thread started
06:42:46 0 s starting thread check
06:42:46 0 s check thread started
06:42:46 0 s ccc [cccam] creating thread for device xxx
06:42:46 0 s loadbalancer: can't read from file /tmp/.oscam/stat
06:42:46 0 s waiting for local card init
06:42:46 5D0FA0 h HTTP Server listening on port 15004
06:42:47 0 s init for all local cards done
06:42:47 0 s anti cascading disabled
06:42:47 5D74A0 c plain dvbapi-client granted (dvbapi, au=off)
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI0 pmt_PTI0.tmp | disable 0
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI1 pmt_PTI2.tmp | disable 0
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI2 pmt_PTI2.tmp | disable 0
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI2 pmt_PTI1.tmp | disable 0
06:42:47 5D74A0 c dvbapi: prio: ret=2 | p: 0D05 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
06:42:47 5D74A0 c dvbapi: prio: ret=3 | p: 09C4 000000 0000 0000 0000 -> map 0000 000000 | prio 1 | delay 0
06:42:47 5D74A0 c dvbapi: prio: ret=2 | i: 0000 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
06:42:47 5D74A0 c dvbapi: 7 entries read from oscam.dvbapi
oscam libioctl v0.01: pti open
oscam libioctl v0.01: pti open
oscam libioctl v0.01: pti open
06:42:49 5D74A0 c stapi: use alternative ioctls
06:42:49 5D74A0 c dvbapi: PTI: PTI2 open 0
06:42:49 5D74A0 c dvbapi: PTI: PTI1 open 1
06:42:49 5D74A0 c dvbapi: PTI: PTI0 open 2
06:42:49 5D74A0 c dvbapi: liboscam_stapi v.0.08a initialized
06:42:49 5D2A28 p xxx: resolved ip=1.2.3.4
06:42:49 5D2A28 p ccc [cccam] connecting to xxx:1234
06:42:49 5D2A28 p ccc [cccam] proxy initialized, server xxx:1234
06:42:41 0 s version=1.20-unstable_svn, build #7456, system=sh4-linux-stapi, nice=10
06:42:41 0 s client max. idle=120 sec, debug level=128, filter_sensitive=1
06:42:41 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
06:42:41 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
06:42:43 0 s ERROR: Cannot open file "/data/oscam/oscam.services" (errno=2 No such file or directory)
06:42:44 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
06:42:44 0 s signal handling initialized (type=sysv)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.srvid" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.tiers" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.provid" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.guess" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.whitelist" (errno=2 No such file or directory)
06:42:44 0 s ERROR: Cannot open file "/data/oscam/oscam.cacheex" (errno=2 No such file or directory)
06:42:44 0 s Starting listener 0
06:42:44 0 s monitor: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s camd35: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s cs378x: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s newcamd: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s pandora: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s csp: disabled
06:42:44 0 s Starting listener 0
06:42:44 0 s radegast: disabled
06:42:44 0 s starting thread http
06:42:44 0 s http thread started
06:42:44 0 s starting thread reader check
06:42:46 0 s reader check thread started
06:42:46 0 s starting thread check
06:42:46 0 s check thread started
06:42:46 0 s ccc [cccam] creating thread for device xxx
06:42:46 0 s loadbalancer: can't read from file /tmp/.oscam/stat
06:42:46 0 s waiting for local card init
06:42:46 5D0FA0 h HTTP Server listening on port 15004
06:42:47 0 s init for all local cards done
06:42:47 0 s anti cascading disabled
06:42:47 5D74A0 c plain dvbapi-client granted (dvbapi, au=off)
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI0 pmt_PTI0.tmp | disable 0
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI1 pmt_PTI2.tmp | disable 0
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI2 pmt_PTI2.tmp | disable 0
06:42:47 5D74A0 c dvbapi: stapi prio: ret=3 | s: PTI2 pmt_PTI1.tmp | disable 0
06:42:47 5D74A0 c dvbapi: prio: ret=2 | p: 0D05 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
06:42:47 5D74A0 c dvbapi: prio: ret=3 | p: 09C4 000000 0000 0000 0000 -> map 0000 000000 | prio 1 | delay 0
06:42:47 5D74A0 c dvbapi: prio: ret=2 | i: 0000 000000 0000 0000 0000 -> map 0000 000000 | prio 0 | delay 0
06:42:47 5D74A0 c dvbapi: 7 entries read from oscam.dvbapi
oscam libioctl v0.01: pti open
oscam libioctl v0.01: pti open
oscam libioctl v0.01: pti open
06:42:49 5D74A0 c stapi: use alternative ioctls
06:42:49 5D74A0 c dvbapi: PTI: PTI2 open 0
06:42:49 5D74A0 c dvbapi: PTI: PTI1 open 1
06:42:49 5D74A0 c dvbapi: PTI: PTI0 open 2
06:42:49 5D74A0 c dvbapi: liboscam_stapi v.0.08a initialized
06:42:49 5D2A28 p xxx: resolved ip=1.2.3.4
06:42:49 5D2A28 p ccc [cccam] connecting to xxx:1234
06:42:49 5D2A28 p ccc [cccam] proxy initialized, server xxx:1234
Was läuft da schief?
Danke schonmal