Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

OScam konfiguration: G09+D09+G02

  • Ersteller Ersteller Deleted member 130877
  • Erstellt am Erstellt am
  • Schlagworte Schlagworte
    oscam
    Nobody is reading this thread right now.
AW: OScam konfiguration: G09+D09+G02

2015/11/26 00:08:04 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6271
2015/11/26 00:08:04 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/26 00:08:04 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:08:04 0 s signal handling initialized
2015/11/26 00:08:04 0 s 296 service-id's loaded in 6ms
2015/11/26 00:08:04 0 s 966 provid's loaded
2015/11/26 00:08:04 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:08:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:08:04 0 s waiting for local card init
2015/11/26 00:08:04 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:08:04 77700468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:08:04 77700468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:08:05 519CF8 r G02 [internal] card detected
2015/11/26 00:08:08 519CF8 r G02 [internal] ATR:
2015/11/26 00:08:08 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:08:08 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:08:08 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:08:09 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:08:10 519CF8 r G02 [internal] card system not supported
2015/11/26 00:08:10 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:08:12 519CF8 r G02 [internal] ATR:
2015/11/26 00:08:12 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:08:12 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:08:12 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:08:13 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:08:14 519CF8 r G02 [internal] card system not supported
2015/11/26 00:08:14 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:08:14 519CF8 r G02 [internal] card initializing error
2015/11/26 00:08:15 0 s init for all local cards done
 
Zuletzt bearbeitet von einem Moderator:
AW: OScam konfiguration: G09+D09+G02

oscam neu gestartet nach den Änderungen?
Teste auch das mal: Box kurz stromlos machen und neu booten.
 
AW: OScam konfiguration: G09+D09+G02

2015/11/26 00:14:27 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 488
2015/11/26 00:14:27 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/26 00:14:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:14:27 0 s signal handling initialized
2015/11/26 00:14:27 0 s 296 service-id's loaded in 25ms
2015/11/26 00:14:27 0 s 966 provid's loaded
2015/11/26 00:14:27 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:14:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:14:27 0 s waiting for local card init
2015/11/26 00:14:27 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:14:27 76F00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:14:27 76F00468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:14:28 519CF8 r G02 [internal] card detected
2015/11/26 00:14:31 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:31 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:31 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:31 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:32 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:33 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:33 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:14:36 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:36 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:36 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:36 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:37 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:38 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:38 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:14:38 519CF8 r G02 [internal] card initializing error
2015/11/26 00:14:39 0 s init for all local cards done
 
Zuletzt bearbeitet von einem Moderator:
AW: OScam konfiguration: G09+D09+G02

wieso sieht dein log jetzt wieder anders aus als vorhin
2015/11/25 23:59:47 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=2700, cardmhz=357)
Zum Vergrößern anklicken....
2015/11/26 00:08:04 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, ​
pll max=27.00 MHz, wanted mhz=5.00 MHz​
​
Zum Vergrößern anklicken....

aktuelle oscam.server bitte posten
log ab start, wo man auch die Version sieht.....
 
AW: OScam konfiguration: G09+D09+G02

.server
[reader]
label = G02
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
log
2015/11/26 00:14:27 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 488
2015/11/26 00:14:27 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/26 00:14:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:14:27 0 s signal handling initialized
2015/11/26 00:14:27 0 s 296 service-id's loaded in 25ms
2015/11/26 00:14:27 0 s 966 provid's loaded
2015/11/26 00:14:27 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:14:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:14:27 0 s waiting for local card init
2015/11/26 00:14:27 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:14:27 76F00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:14:27 76F00468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:14:28 519CF8 r G02 [internal] card detected
2015/11/26 00:14:31 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:31 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:31 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:31 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:32 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:33 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:33 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:14:36 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:36 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:36 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:36 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:37 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:38 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:38 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:14:38 519CF8 r G02 [internal] card initializing error
2015/11/26 00:14:39 0 s init for all local cards done

OSCAM Webinterface developed by Streamboard Team
Current Time: 26.11.15 | 00:28:31 Start Time: 26.11.15 | 00:14:27 Up Time: 00:14:04
Process ID: 488 Access from: 192.168.178.115 Run as: root
OSCAM 1.20-unstable_emu build r9450


ist alles von log
​
 
Zuletzt bearbeitet von einem Moderator:
AW: OScam konfiguration: G09+D09+G02

löscht Du die ATR aus dem log raus? oder ist da keine?
die Karte ist richtig rum im Slot?
Aktualisiere mal auch deine OScam Version oder/und teste einen externen Reader wenn du einen hast
 
AW: OScam konfiguration: G09+D09+G02

  • NEU OSCAM NEU LOG ABER KARTE IST IMMER NOCH OFF:emoticon-0138-think
  • neus oscAM NEU LOG A2015/11/26 12:46:11 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (mipsel-openpli40-linux-gnu-libusb)

  • 2015/11/26 12:46:11 00000000 s (main) System name = Linux
  • 2015/11/26 12:46:11 00000000 s (main) Host name = uniboxhde
  • 2015/11/26 12:46:11 00000000 s (main) Release = 3.14.21
  • 2015/11/26 12:46:11 00000000 s (main) Version = #1 SMP Sat Nov 14 19:56:30 CET 2015
  • 2015/11/26 12:46:11 00000000 s (main) Machine = mips
  • 2015/11/26 12:46:11 00000000 s (main) Stb model = dm800se
  • 2015/11/26 12:46:11 00000000 s (main) Stb vumodel = vuultimo
  • 2015/11/26 12:46:11 00000000 s (main) Stb boxtype = unibox-hde
  • 2015/11/26 12:46:11 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 458
  • 2015/11/26 12:46:11 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2015/11/26 12:46:11 00000000 s (main) signal handling initialized
  • 2015/11/26 12:46:11 00000000 s (reader) G02 [internal] creating thread for device /dev/sci0
  • 2015/11/26 12:46:11 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
  • 2015/11/26 12:46:11 00000000 s (main) waiting for local card init
  • 2015/11/26 12:46:11 0BE461F3 r (reader) G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
  • 2015/11/26 12:46:11 0BE461F3 r (reader) G02 [internal] Reader sci internal, detected box type: unibox-hde
  • 2015/11/26 12:46:11 010B3439 h (webif) webif: decompressed 164060 bytes back into 392536 bytes
  • 2015/11/26 12:46:11 010B3439 h (webif) HTTP Server running. ip=0.0.0.0 port=9997
  • 2015/11/26 12:46:12 0BE461F3 r (reader) G02 [internal] card detected
  • 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] ATR:
  • 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
  • 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
  • 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] Buffers readed 0 bytes total time_us 76357
  • 2015/11/26 12:46:17 0BE461F3 r (reader) G02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/11/26 12:46:18 0BE461F3 r (reader) G02 [internal] card system not supported
  • 2015/11/26 12:46:18 0BE461F3 r (reader) G02 [internal] Normal mode failed, reverting to Deprecated Mode
  • 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] ATR:
  • 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
  • 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
  • 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] Buffers readed 0 bytes total time_us 75192
  • 2015/11/26 12:46:22 0BE461F3 r (reader) G02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
  • 2015/11/26 12:46:23 0BE461F3 r (reader) G02 [internal] card system not supported
  • 2015/11/26 12:46:23 0BE461F3 r (reader) G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
  • 2015/11/26 12:46:23 0BE461F3 r (reader) G02 [internal] card initializing error
  • 2015/11/26 12:46:24 00000000 s (main) init for all local cards done
  • 2015/11/26 12:46:24 00000000 s (anticasc) anti cascading disabled
  • 2015/11/26 12:46:24 7D87D3E5 c (client) plain dvbapi-client granted (anonymous, au=off)
  • 2015/11/26 12:46:24 7D87D3E5 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
  • 2015/11/26 12:46:24 7D87D3E5 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
 
Zuletzt bearbeitet von einem Moderator:
AW: OScam konfiguration: G09+D09+G02

was ist jetzt mit der ATR?
  • 2015/11/26 12:46:11 0BE461F3 r (reader) G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
Zum Vergrößern anklicken....
sollte bei 2700 stehen das CARDMHZ?
wieso geändert? mit 2700 getestet?
es ist schwer wenn du ganze Zeit was änderst und auf Fragen nicht antwortest

geht die Karte überhaupt wo anders?
 
AW: OScam konfiguration: G09+D09+G02

ja auf eine originalkabel receiver geht
 
AW: OScam konfiguration: G09+D09+G02

die ATR im log
  • 2015/11/26 12:46:12 0BE461F3 r (reader) G02 [internal] card detected
  • 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] ATR: XXXX
Zum Vergrößern anklicken....
da sollten paar zahlen stehen wenn die Karte eingesteckt ist

welche Fragen?
die die ich schon vorher gestellt habe und jetzt ein zweites mal geschrieben habe

ist die Karte richtig rum im Slot ???
 
AW: OScam konfiguration: G09+D09+G02

jadie karte ist richtig rum und atr ist auch vorhanden
 
AW: OScam konfiguration: G09+D09+G02

das war ja die FRAGE
wieso editierst du dann das ATR ???
dieses ist für jede Karte gleich
 
AW: OScam konfiguration: G09+D09+G02

o.k wusste ich nicht sorry aber die karte ist noch OFF ich weiss nicht mehr weiter :wacko1:
 
AW: OScam konfiguration: G09+D09+G02

externer Reader?
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

P
auf welchen Sender bekomme ich EMMs beim ehemaligen Austria Sat
2
Antworten
22
Aufrufe
837
Polarlander
P
R
gelöst Hilfe bei der Konfiguration von OScam für ORF Karten
2
Antworten
16
Aufrufe
917
ghost0815
gelöst Oscam Server hinter VPS Oscam Server Problem
2 3
Antworten
30
Aufrufe
761
TDCroPower
A
Aussetzer bei Oscam Client mit V23 Karte
2
Antworten
23
Aufrufe
782
DarkStarXxX
D
H
Keine Empfang von EMMs mit ORF Karte (K2XXXXXXXXXXXXX)
2
Antworten
18
Aufrufe
1K
Kind regards
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…