Digital Eliteboard - Das Digitale Technik Forum
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben
OScam konfiguration: G09+D09+G02
- Ersteller Deleted member 130877
- Erstellt am
-
- Schlagworte
- oscam
-
Nobody is reading this thread right now.
AW: OScam konfiguration: G09+D09+G02
2015/11/26 00:08:04 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 6271
2015/11/26 00:08:04 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/26 00:08:04 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:08:04 0 s signal handling initialized
2015/11/26 00:08:04 0 s 296 service-id's loaded in 6ms
2015/11/26 00:08:04 0 s 966 provid's loaded
2015/11/26 00:08:04 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:08:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:08:04 0 s waiting for local card init
2015/11/26 00:08:04 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:08:04 77700468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:08:04 77700468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:08:05 519CF8 r G02 [internal] card detected
2015/11/26 00:08:08 519CF8 r G02 [internal] ATR:
2015/11/26 00:08:08 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:08:08 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:08:08 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:08:09 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:08:10 519CF8 r G02 [internal] card system not supported
2015/11/26 00:08:10 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:08:12 519CF8 r G02 [internal] ATR:
2015/11/26 00:08:12 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:08:12 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:08:12 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:08:13 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:08:14 519CF8 r G02 [internal] card system not supported
2015/11/26 00:08:14 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:08:14 519CF8 r G02 [internal] card initializing error
2015/11/26 00:08:15 0 s init for all local cards done
2015/11/26 00:08:04 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:08:04 0 s signal handling initialized
2015/11/26 00:08:04 0 s 296 service-id's loaded in 6ms
2015/11/26 00:08:04 0 s 966 provid's loaded
2015/11/26 00:08:04 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:08:04 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:08:04 0 s waiting for local card init
2015/11/26 00:08:04 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:08:04 77700468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:08:04 77700468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:08:05 519CF8 r G02 [internal] card detected
2015/11/26 00:08:08 519CF8 r G02 [internal] ATR:
2015/11/26 00:08:08 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:08:08 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:08:08 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:08:09 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:08:10 519CF8 r G02 [internal] card system not supported
2015/11/26 00:08:10 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:08:12 519CF8 r G02 [internal] ATR:
2015/11/26 00:08:12 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:08:12 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:08:12 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:08:13 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:08:14 519CF8 r G02 [internal] card system not supported
2015/11/26 00:08:14 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:08:14 519CF8 r G02 [internal] card initializing error
2015/11/26 00:08:15 0 s init for all local cards done
Zuletzt bearbeitet von einem Moderator:
- Registriert
- 29. Mai 2008
- Beiträge
- 32.457
- Lösungen
- 6
- Reaktionspunkte
- 30.419
- Punkte
- 1.103
- Ort
- Deutschland
AW: OScam konfiguration: G09+D09+G02
oscam neu gestartet nach den Änderungen?
Teste auch das mal: Box kurz stromlos machen und neu booten.
oscam neu gestartet nach den Änderungen?
Teste auch das mal: Box kurz stromlos machen und neu booten.
AW: OScam konfiguration: G09+D09+G02
2015/11/26 00:14:27 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 488
2015/11/26 00:14:27 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/26 00:14:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:14:27 0 s signal handling initialized
2015/11/26 00:14:27 0 s 296 service-id's loaded in 25ms
2015/11/26 00:14:27 0 s 966 provid's loaded
2015/11/26 00:14:27 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:14:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:14:27 0 s waiting for local card init
2015/11/26 00:14:27 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:14:27 76F00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:14:27 76F00468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:14:28 519CF8 r G02 [internal] card detected
2015/11/26 00:14:31 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:31 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:31 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:31 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:32 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:33 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:33 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:14:36 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:36 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:36 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:36 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:37 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:38 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:38 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:14:38 519CF8 r G02 [internal] card initializing error
2015/11/26 00:14:39 0 s init for all local cards done
2015/11/26 00:14:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:14:27 0 s signal handling initialized
2015/11/26 00:14:27 0 s 296 service-id's loaded in 25ms
2015/11/26 00:14:27 0 s 966 provid's loaded
2015/11/26 00:14:27 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:14:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:14:27 0 s waiting for local card init
2015/11/26 00:14:27 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:14:27 76F00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:14:27 76F00468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:14:28 519CF8 r G02 [internal] card detected
2015/11/26 00:14:31 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:31 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:31 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:31 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:32 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:33 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:33 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:14:36 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:36 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:36 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:36 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:37 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:38 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:38 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:14:38 519CF8 r G02 [internal] card initializing error
2015/11/26 00:14:39 0 s init for all local cards done
Zuletzt bearbeitet von einem Moderator:
AW: OScam konfiguration: G09+D09+G02
.server
log
ist alles von log
.server
[reader]
label = G02
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
label = G02
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 2700
group = 1
emmcache = 1,3,2,0
2015/11/26 00:14:27 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 488
2015/11/26 00:14:27 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/26 00:14:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:14:27 0 s signal handling initialized
2015/11/26 00:14:27 0 s 296 service-id's loaded in 25ms
2015/11/26 00:14:27 0 s 966 provid's loaded
2015/11/26 00:14:27 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:14:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:14:27 0 s waiting for local card init
2015/11/26 00:14:27 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:14:27 76F00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:14:27 76F00468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:14:28 519CF8 r G02 [internal] card detected
2015/11/26 00:14:31 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:31 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:31 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:31 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:32 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:33 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:33 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:14:36 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:36 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:36 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:36 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:37 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:38 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:38 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:14:38 519CF8 r G02 [internal] card initializing error
2015/11/26 00:14:39 0 s init for all local cards done
OSCAM Webinterface developed by Streamboard Team
Current Time: 26.11.15 | 00:28:31 Start Time: 26.11.15 | 00:14:27 Up Time: 00:14:04
Process ID: 488 Access from: 192.168.178.115 Run as: root
OSCAM 1.20-unstable_emu build r9450
2015/11/26 00:14:27 0 s services reloaded: 0 services freed, 0 services loaded, rejected 0
2015/11/26 00:14:27 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2015/11/26 00:14:27 0 s signal handling initialized
2015/11/26 00:14:27 0 s 296 service-id's loaded in 25ms
2015/11/26 00:14:27 0 s 966 provid's loaded
2015/11/26 00:14:27 0 s G02 [internal] creating thread for device /dev/sci0
2015/11/26 00:14:27 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2015/11/26 00:14:27 0 s waiting for local card init
2015/11/26 00:14:27 519CF8 r G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=5.00 MHz
2015/11/26 00:14:27 76F00468 h webif: decompressed 68257 bytes back into 192688 bytes
2015/11/26 00:14:27 76F00468 h HTTP Server running. ip=0.0.0.0 port=9997
2015/11/26 00:14:28 519CF8 r G02 [internal] card detected
2015/11/26 00:14:31 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:31 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:31 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:31 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:32 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:33 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:33 519CF8 r G02 [internal] Normal mode failed, reverting to Deprecated Mode
2015/11/26 00:14:36 519CF8 r G02 [internal] ATR:
2015/11/26 00:14:36 519CF8 r G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
2015/11/26 00:14:36 519CF8 r G02 [internal] TEST tempo mhz check = 500 mhz
2015/11/26 00:14:36 519CF8 r G02 [internal] Calculated work ETU is 82.67 us reader mhz = 450
2015/11/26 00:14:37 519CF8 r G02 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
2015/11/26 00:14:38 519CF8 r G02 [internal] card system not supported
2015/11/26 00:14:38 519CF8 r G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/11/26 00:14:38 519CF8 r G02 [internal] card initializing error
2015/11/26 00:14:39 0 s init for all local cards done
OSCAM Webinterface developed by Streamboard Team
Current Time: 26.11.15 | 00:28:31 Start Time: 26.11.15 | 00:14:27 Up Time: 00:14:04
Process ID: 488 Access from: 192.168.178.115 Run as: root
OSCAM 1.20-unstable_emu build r9450
ist alles von log
Zuletzt bearbeitet von einem Moderator:
AW: OScam konfiguration: G09+D09+G02
löscht Du die ATR aus dem log raus? oder ist da keine?
die Karte ist richtig rum im Slot?
Aktualisiere mal auch deine OScam Version oder/und teste einen externen Reader wenn du einen hast
löscht Du die ATR aus dem log raus? oder ist da keine?
die Karte ist richtig rum im Slot?
Aktualisiere mal auch deine OScam Version oder/und teste einen externen Reader wenn du einen hast
AW: OScam konfiguration: G09+D09+G02
- NEU OSCAM NEU LOG ABER KARTE IST IMMER NOCH OFF:emoticon-0138-think
- neus oscAM NEU LOG A2015/11/26 12:46:11 00000000 s >> OSCam << cardserver log switched, version 1.20-unstable_svn, build r10998 (mipsel-openpli40-linux-gnu-libusb)
- 2015/11/26 12:46:11 00000000 s (main) System name = Linux
- 2015/11/26 12:46:11 00000000 s (main) Host name = uniboxhde
- 2015/11/26 12:46:11 00000000 s (main) Release = 3.14.21
- 2015/11/26 12:46:11 00000000 s (main) Version = #1 SMP Sat Nov 14 19:56:30 CET 2015
- 2015/11/26 12:46:11 00000000 s (main) Machine = mips
- 2015/11/26 12:46:11 00000000 s (main) Stb model = dm800se
- 2015/11/26 12:46:11 00000000 s (main) Stb vumodel = vuultimo
- 2015/11/26 12:46:11 00000000 s (main) Stb boxtype = unibox-hde
- 2015/11/26 12:46:11 00000000 s (main) creating pidfile /tmp/.oscam/oscam.pid with pid 458
- 2015/11/26 12:46:11 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
- 2015/11/26 12:46:11 00000000 s (main) signal handling initialized
- 2015/11/26 12:46:11 00000000 s (reader) G02 [internal] creating thread for device /dev/sci0
- 2015/11/26 12:46:11 00000000 s (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
- 2015/11/26 12:46:11 00000000 s (main) waiting for local card init
- 2015/11/26 12:46:11 0BE461F3 r (reader) G02 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=357, cardmhz=357)
- 2015/11/26 12:46:11 0BE461F3 r (reader) G02 [internal] Reader sci internal, detected box type: unibox-hde
- 2015/11/26 12:46:11 010B3439 h (webif) webif: decompressed 164060 bytes back into 392536 bytes
- 2015/11/26 12:46:11 010B3439 h (webif) HTTP Server running. ip=0.0.0.0 port=9997
- 2015/11/26 12:46:12 0BE461F3 r (reader) G02 [internal] card detected
- 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] ATR:
- 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
- 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
- 2015/11/26 12:46:15 0BE461F3 r (reader) G02 [internal] Buffers readed 0 bytes total time_us 76357
- 2015/11/26 12:46:17 0BE461F3 r (reader) G02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
- 2015/11/26 12:46:18 0BE461F3 r (reader) G02 [internal] card system not supported
- 2015/11/26 12:46:18 0BE461F3 r (reader) G02 [internal] Normal mode failed, reverting to Deprecated Mode
- 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] ATR:
- 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] Init card protocol T0, FI=1, F=372, D=1, N=2
- 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] Calculated work ETU is 74.40 us reader mhz = 500
- 2015/11/26 12:46:21 0BE461F3 r (reader) G02 [internal] Buffers readed 0 bytes total time_us 75192
- 2015/11/26 12:46:22 0BE461F3 r (reader) G02 [internal] ATR Fsmax is 5 MHz, clocking card to 5.00 (specified in reader->mhz)
- 2015/11/26 12:46:23 0BE461F3 r (reader) G02 [internal] card system not supported
- 2015/11/26 12:46:23 0BE461F3 r (reader) G02 [internal] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
- 2015/11/26 12:46:23 0BE461F3 r (reader) G02 [internal] card initializing error
- 2015/11/26 12:46:24 00000000 s (main) init for all local cards done
- 2015/11/26 12:46:24 00000000 s (anticasc) anti cascading disabled
- 2015/11/26 12:46:24 7D87D3E5 c (client) plain dvbapi-client granted (anonymous, au=off)
- 2015/11/26 12:46:24 7D87D3E5 c (dvbapi) dvbapi channelcache loaded from /usr/keys/oscam_atv/oscam.ccache
- 2015/11/26 12:46:24 7D87D3E5 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
Zuletzt bearbeitet von einem Moderator:
AW: OScam konfiguration: G09+D09+G02
was ist jetzt mit der ATR?
wieso geändert? mit 2700 getestet?
es ist schwer wenn du ganze Zeit was änderst und auf Fragen nicht antwortest
geht die Karte überhaupt wo anders?
was ist jetzt mit der ATR?
sollte bei 2700 stehen das CARDMHZ?
wieso geändert? mit 2700 getestet?
es ist schwer wenn du ganze Zeit was änderst und auf Fragen nicht antwortest
geht die Karte überhaupt wo anders?
AW: OScam konfiguration: G09+D09+G02
die ATR im log
welche Fragen?
die die ich schon vorher gestellt habe und jetzt ein zweites mal geschrieben habe
ist die Karte richtig rum im Slot ???
die ATR im log
da sollten paar zahlen stehen wenn die Karte eingesteckt ist
welche Fragen?
die die ich schon vorher gestellt habe und jetzt ein zweites mal geschrieben habe
ist die Karte richtig rum im Slot ???
