Oscam einrichten

[rockyv]

Danke erst einmal,

aber irgendwie muss noch ein Fehler drin sein.

 

[Alex]

Das Serverseitige Log wäre da interessanter

 

[rockyv]

Spoiler

2016/12/26 17:02:52 00000000 s     (main) System name    = Linux
2016/12/26 17:02:52 00000000 s     (main) Host name      = dm900
2016/12/26 17:02:52 00000000 s     (main) Release        = 3.14-1.15-dm900
2016/12/26 17:02:52 00000000 s     (main) Version        = #12 SMP Mon Dec 12 21:57:35 UTC 2016
2016/12/26 17:02:52 00000000 s     (main) Machine        = armv7l
2016/12/26 17:02:52 00000000 s     (main) Stb model      = dm900
2016/12/26 17:02:52 00000000 s     (main) creating pidfile /tmp/.oscam/oscam.pid with pid 31903
2016/12/26 17:02:52 00000000 s   (config) services reloaded: 0 services freed, 36 services loaded, rejected 0
2016/12/26 17:02:52 00000000 s   (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2016/12/26 17:02:52 00000000 s     (main) signal handling initialized
2016/12/26 17:02:52 00000000 s   (config) 995 provid's loaded
2016/12/26 17:02:52 00000000 s   (config) 4680 service-id's loaded in 14 ms
2016/12/26 17:02:52 00000000 s   (config) WARNING: You risk high CPU load and high ECM times with more than 2000 service-id's!
2016/12/26 17:02:52 00000000 s   (config) HINT: --> use optimized lists from http://www.streamboard.tv/wiki/Srvid
2016/12/26 17:02:52 00000000 s   (config) 105 tier-id's loaded
2016/12/26 17:02:52 00000000 s   (reader) hd+01 [internal] creating thread for device /dev/sci0
2016/12/26 17:02:52 00000000 s     (stat) loadbalancer: could not open /tmp/.oscam/stat for reading (errno=2 No such file or directory)
2016/12/26 17:02:52 00000000 s     (main) waiting for local card init
2016/12/26 17:02:52 5174CAB9 r   (reader) hd+01 [internal] Reader initialized (device=/dev/sci0, detect=cd, mhz=368, cardmhz=368)
2016/12/26 17:02:52 5174CAB9 r   (reader) hd+01 [internal] Reader sci internal, detected box type: dm900
2016/12/26 17:02:52 5DD0EEC9 h    (webif) webif: decompressed 174283 bytes back into 424504 bytes
2016/12/26 17:02:52 5DD0EEC9 h    (webif) HTTP Server running. ip=0.0.0.0 port=8888
2016/12/26 17:02:53 5174CAB9 r   (reader) hd+01 [internal] card detected
2016/12/26 17:02:55 5174CAB9 r   (reader) hd+01 [internal] ATR: 3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 31 38 30 20 4D 65 72 30 30 30 28
2016/12/26 17:02:55 5174CAB9 r   (reader) hd+01 [internal] Init card protocol T1, FI=9, F=512, D=16, N=255
2016/12/26 17:02:55 5174CAB9 r   (reader) hd+01 [internal] Calculated work ETU is 8.70 us reader mhz = 368
2016/12/26 17:02:55 5174CAB9 r   (reader) hd+01 [internal] Buffers readed  0 bytes total time_us 75120
2016/12/26 17:02:56 5174CAB9 r   (reader) hd+01 [internal] ATR Fsmax is 5 MHz, clocking card to 3.68 (specified in reader->mhz)
2016/12/26 17:02:56 5174CAB9 r   (reader) hd+01 [internal] Card responded ok for ifsd request of 160
2016/12/26 17:02:57 5174CAB9 r   (reader) hd+01 [internal] detect native nagra card
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [internal] ready for requests
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [internal] found card system nagra
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No  1 out of max alloted of 1
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] ROM:    D N A S P 1 8 0
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] REV:    M e r 0 0 0
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] SER:    ############
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] CAID:   1843
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] Prv.ID: 00 00 34 11 (sysid)
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] Prv.ID: 00 00 00 00
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] IRD ID: ############
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] active to: 2017/02/08 11:59
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] -----------------------------------------
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] |id  |tier    |valid from  |valid to    |
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] +----+--------+------------+------------+
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] |8011|0066    |2011/11/15  |2012/11/15  |
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] |8011|0067    |2010/01/19  |2010/01/20  |
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] |8011|0BEA    |2015/12/28  |2017/12/13  |
2016/12/26 17:02:58 5174CAB9 r   (reader) hd+01 [nagra] -----------------------------------------
2016/12/26 17:02:59 00000000 s     (main) init for all local cards done
2016/12/26 17:02:59 00000000 s (emmcache) loaded 0 emmcache records from /etc/tuxbox/config/oscam.emmcache in 1 ms
2016/12/26 17:02:59 00000000 s (emmcache) loaded 0 emmstat records from /etc/tuxbox/config/oscam.emmstat in 0 ms
2016/12/26 17:02:59 00000000 s (anticasc) anti cascading disabled
2016/12/26 17:02:59 270EAD82 c   (client) plain dvbapi-client granted (anonymous, au=off)
2016/12/26 17:02:59 270EAD82 c   (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam.ccache
2016/12/26 17:02:59 270EAD82 c   (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1 maximum amount of possible filters is 32 (oscam limit is 32)
2016/12/26 17:02:59 270EAD82 c   (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in caPMT
2016/12/26 17:02:59 270EAD82 c   (dvbapi) Demuxer 0 found 0 ECMpids and 9 STREAMpids in PMT

 

[Alex]

Es wird nirgend ein Port geöffnet. Ein entsprechender Eintrag im Log würde so aussehen:

2016/12/26 14:00:53 00000000 s      (net) cs378x: initialized (fd=7, port=12345, prio=1)

 

[Derek Buegel]

aber irgendwie

Ich gehe davon aus, das Du auch einen User angelegt hast.

MfG

 

[rockyv]

Meinst du jetzt in oscam.user:

[account]
user = dream
passwd = teelicht
au = 1
group = 1

 

[Derek Buegel]

Meinte ich.
Wie sieht die oscam.server beim Client aus?

MfG

 

[rockyv]

[reader]
label = Remote-OScam
protocol = cs378x
device = 192.168.154.208,8888
user = dream
password = teelicht
reconnecttimeout = 60
keepalive = 1
group = 1

 

[Alex]

Was bringt der Reader, wenn serverseitig laut Log kein Port geöffne wird?

 

[rockyv]

Du musst Regestriert sein, um das angehängte Bild zusehen.

 

[Derek Buegel]

Schau mal in Post #6.
httpport = 8888

Du musst den cs378x-Port anlegen. Der hann natürlich nicht 8888 sein, da das schon der httpport ist.
Trag mal so ein Server:
[cs378x]
port = 34345
Client:
device = 192.168.154.208,34345

MfG

 

[rockyv]

Danke, da werd ich erst mal bei der Client-Box den Port ändern und oscam neu starten.

 

[Derek Buegel]

Wieso auf der Clientbox? Da brauchst Du kein Protokoll eintragen.

MfG

 

[rockyv]

Welches Protokoll? wollte auf der Zweitbox den Port ändern, weil beide 8888 haben. Oder verstehe ich dich irgendwie falsch?

 

[Derek Buegel]

Du brauchst den CS-Port (in meinem Beispiel) 34345. Den Trägst Du in die oscam.conf ein:
[cs378x]
port = 34345
Dann änderst Du in der oscam.server, der Clientbox, die Zeile device:
device = 192.168.154.208,34345
Oscam neu starten (Server und Client) - freuen.
Wenn keine Freude aufkommt (was ich nicht glaube), Konfigs von Server und Clioent posten + ein Log dazu.

MfG