da ich auch die H8.2H habe, und zusammen mit @WXbet sehr lange brauchte, um was passendes zu bauen,
kann ich dir sagen:
vergiss alles, was du auf den Feed's findest - es wird schlicht und ergreifend auf dem HiSi-MV430 Chipset nicht funktionieren!
(diese Aussage gilt also auch für die Octagon SFX6008/6018 und evtl. baugleiche Derivate!)
hier im DEB findest du jedoch eine lauffähige Oscam2!
nochmal: das ist keine .zip sondern eine normale binary ohne endung!
(ich musste nur ein .zip dranhängen, weil der DEB-Uploader das so haben wollte!)
=> also einfach so umbenennen, wie du den Namen brauchst (eg. "oscam"!)
wenn du es dann richtig gemacht hast, schaut es dann so aus:
Signature: Valid - successfully verified using built-in Public Key
Signer: OpenSSL 1.1.1n 15 Mar 2022
SHA256: 611a1a88aabbd9b52e65ba6c6e6c9d2673ab8e0db0e08bb98448c89b3db86ace
Certificate: Trusted CA Certificate
Subject: CN=Private OSCam CA Certificate
Issuer: CN=Private OSCam Root CA
Version: 3
Serial: 08dd07026c81fde7ab52e180de66fcd33ee8135d
Fingerprint: 8aeb89ef7a82369ebf2b6a8499a73e61fc572f45
Valid from: 28.09.2024 12:35:28
Valid to: 28.09.2026 12:35:28
Status: Valid
Type: 256 bit ECDSA Key
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Compressed pages: no
SSL support: yes
DVB API support: yes
DVB API with extended CW API support: no
DVB API with Stream Relay support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with COOLAPI2 support: no
DVB API with STAPI support: no
DVB API with STAPI5 support: no
DVB API with NEUTRINO support: no
DVB API read-sdt charsets: yes
Anti-cascading support: yes
Debug mode: no
Monitor: yes
Loadbalancing support: yes
Cache exchange support: yes
Cache exchange AIO support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
Clockfix with realtime clock: no
IPv6 support: no
ARM NEON (SIMD/MPE) support: no
Binary signing support: yes
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
gbox: yes
radegast: yes
scam: yes
serial: no
constant CW: yes
Pandora: no
ghttp: no
Streamrelay: yes
Reader support: yes
Nagra: yes
Nagra Merlin: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: no - no EMM support!
TONGFANG: no - no EMM support!
Bulcrypt: no - no EMM support!
Griffin: no - no EMM support!
DGCrypt: no - no EMM support!
cardreader_phoenix: yes
cardreader_drecas: no
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_coolapi2: no
cardreader_internal_sci: yes
cardreader_sc8in1: no
cardreader_mp35: no
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: no
cardreader_stapi: no
cardreader_stapi5: no
cardreader_stinger: yes
... da hättest du vmtl. noch Wochen dran gesessen, ohne ein brauchbares Ergebnis!
... ich will mich ja nicht zu weit rauslehnen, aber wenn du es nicht schaffst Frauchen zu besänftigen,
dann schicke sie rüber - dann kümmere ich mich vertrauensvoll auch um dieses Problem!
=> Merke: ich hab heute meinen sozialen Tag!
Web interface support: yes
LiveLog support: yes
jQuery support intern: yes
Touch interface support: no
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API...
@ghost0815
ja genau, das sollte die TC=solo4k und ohne Neon sein! (und openssl 1.0.2/1.1.1 wäre auch hilfreich!)
andere TC's sind da wohl zickig bzw. brauchen wohl ein anderes Setting.
(hier: armv7-generic mit den Extra-Settings im S3, genau dafür hat @WXbet diese preconfig eingefügt!)
=> leider wird dieses Setting auf den "Feeds" nicht berücksichtigt -
so das unbedarfte MV430-User mit der normalen armv7-oscam2 auf die Nase fallen!