Oscam an Fritzbox 7390 mit SMargo und V14

[flipkill]

Hallo,

ich habe auf einer Fritzbox 7390 das Freetz Image "freetz-devel-11361M" geflashed. Leider bekomme ich Oscam nicht zum laufen.


Oscam Version: OSCAM 1.20-unstable_svn build r9072
Fritzbox: 7390
Image: freetz-devel-11361M
Karte: V14
Reader: Smargo

Ich bekomme immer folgenden Fehler:

Spoiler

2014/01/27 16:53:08 565020 r skysat [mouse] card detected
2014/01/27 16:53:09 565020 r skysat [mouse] ATR: !!! von mir entfernt!!!
2014/01/27 16:53:09 565020 r skysat [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/27 16:53:09 565020 r skysat [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/01/27 16:53:09 565020 r skysat [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/27 16:53:13 565020 r skysat [mouse] card system not supported
2014/01/27 16:53:13 565020 r skysat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/27 16:53:13 565020 r skysat [mouse] card initializing error

Anbei die Konfigurationsdateien


[oscam.version]

Spoiler

Unix starttime: 1390837975
Starttime: 27.01.2014 16:52:55
Version: oscam-1.20-unstable_svn-r9072
ConfigDir: /var/InternerSpeicher/cs/oscam/

Web interface support: yes
Touch interface support: yes
SSL support: no
DVB API support: yes
DVB API with AZBOX support: no
DVB API with MCA support: no
DVB API with COOLAPI support: no
DVB API with STAPI support: no
Anti-cascading support: yes
Irdeto guessing: yes
Debug mode: yes
Monitor: yes
Loadbalancing support: yes
CW Cycle Check support: yes
LCD support: no
LED support: no
IPv6 support: no
Cache exchange support: yes

camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
CCcam share: yes
Pandora: yes
ghttp: yes
gbox: yes
radegast: yes
serial: yes
constant CW: yes

Reader support: yes

Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Bulcrypt: yes
Griffin: yes
DGCrypt: yes

cardreader_phoenix: yes
cardreader_internal_azbox: no
cardreader_internal_coolapi: no
cardreader_internal_sci: yes
cardreader_sc8in1: yes
cardreader_mp35: yes
cardreader_smargo: yes
cardreader_pcsc: no
cardreader_smartreader: yes
cardreader_db2com: yes
cardreader_stapi: no
cardreader_stinger: yes

[oscam.config]

Spoiler

#######################################
# #
# www.digital-eliteboard.com #
# #
#######################################

global]
logfile = /var/media/ftp/OScam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 2480
waitforcards = 1
preferlocalcards = 0
saveinithistory = 1
readerrestartseconds = 5
resolvegethostbyname = 0

[monitor]
port = 988
aulow = 120
hideclient_to = 0
monlevel = 4
appendchaninfo = 1

[cccam]
port = 35000
reshare = 5
version = 2.2.1

#[newcamd]
#port = 46000@1830:003411
#port = 47000@1702:000000
#key = 0102030405060708091011121314
#keepalive = 1
#mgclient = 0


[webif]
httpport = 83
httpcss = /var/media/ftp/cs/oscam/blacksnake_blue.css
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0

[lcd]
enablelcd = 1

[oscam.server]

Spoiler

# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r9072
# Read more:

Sie müssen registriert sein, um Links zu sehen.

[reader]
label = skysat
enable = 1
protocol = mouse
device = /dev/ttyUSB0
device_out_endpoint = 0x82
services = sky
smargopatch = 1
caid = 09C4
boxid = 12345678
detect = cd
nagra_read = 2
mhz = 357
cardmhz = 357
ident =
group = 1
emmcache = 1,3,2
lb_weight = 100
deprecated = 1
auprovid = 000001

 

[Tengri3108]

AW: Oscam an Fritzbox 7390 mit SMargo und V14

Hi

Die richtige caid für die v14 ist 098c es sei denn du hast eine v13 da wäre deine eingetragene caid richtig.

Gruß Ralf

 

[flipkill]

AW: Oscam an Fritzbox 7390 mit SMargo und V14

Hallo,

vielen Dank, ja ich habe eine V14 Karte

Leider tritt der Fehler immer noch auf.
Hat noch jemand ne Idee?

Fehler:

Spoiler

2014/01/27 20:06:09 565020 r skysat [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/27 20:06:09 565020 r skysat [mouse] Calculated work ETU is 104.20 us reader mhz = 357
2014/01/27 20:06:10 565020 r skysat [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/27 20:06:11 565020 r skysat [mouse] card system not supported
2014/01/27 20:06:11 565020 r skysat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/27 20:06:11 565020 r skysat [mouse] card initializing error
2014/01/27 20:06:11 0 s init for all local cards done
2014/01/27 20:06:11 0 s anti cascading disabled

Gruß Flipkill

 

[Bodo-1]

AW: Oscam an Fritzbox 7390 mit SMargo und V14

Oscam Server bitte mal so machen :

Spoiler

[reader]
label = skysat
enable = 1
protocol = mouse
device = /dev/ttyUSB0
caid = 098c
boxid = 12345678
ins7e11 = 15
detect = cd
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
ndsversion = 2

Damit sollte es laufen :

Gruss Bodo

 

[flipkill]

AW: Oscam an Fritzbox 7390 mit SMargo und V14

Hallo,

vielen Dank @Tengri3108 & Link Removed

geht leider immer noch nicht

Jemand noch eine Idee?
Fehler:

Spoiler

2014/01/27 20:33:31 565010 r skysat [mouse] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/27 20:33:31 565010 r skysat [mouse] Setting baudrate to 38400 bps
2014/01/27 20:33:31 565010 r skysat [mouse] Calculated work ETU is 26.05 us reader mhz = 357
2014/01/27 20:33:31 565010 r skysat [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/01/27 20:33:32 565010 r skysat [mouse] card system not supported
2014/01/27 20:33:32 565010 r skysat [mouse] Normal mode failed, reverting to Deprecated Mode
2014/01/27 20:33:36 565010 r skysat [mouse] Error activating card.
2014/01/27 20:33:44 0 --- Skipped 2 duplicated log lines ---
2014/01/27 20:33:44 565010 r skysat [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/27 20:33:44 565010 r skysat [mouse] card initializing error
2014/01/27 20:33:45 0 s init for all local cards done
2014/01/27 20:33:45 0 s anti cascading disabled

Gruß Flipkill

 

[Bodo-1]

AW: Oscam an Fritzbox 7390 mit SMargo und V14

HAst du den ftdi Treiber denn auch geladen für das mouse Protokoll ?
Alternativ:
Beim Smargo kann man soweit es möglich ist auch auf das smartreader Protokoll setzen. Hier wird libusb statt ftdi verwendet
Der smargo muss für das smartreader Protocoll auf Autoswich eingestellt sein.

Bodo

 

[flipkill]

AW: Oscam an Fritzbox 7390 mit SMargo und V14

Hallo,

habe nun auf protocol = smargo umgestellt bekomme nun aber folgenden Fehler:

Spoiler

2014/01/27 20:47:36 565010 r skysat [smargo] Init card protocol T0, FI=1, F=372, D=4, N=2
2014/01/27 20:47:36 565010 r skysat [smargo] Calculated work ETU is 17.42 us reader mhz = 534
2014/01/27 20:47:36 565010 r skysat [smargo] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 5.34 MHz (specified in reader->mhz)
2014/01/27 20:47:38 565010 r skysat [smargo] Card type: P1TV
2014/01/27 20:47:38 565010 r skysat [smargo] Rom version: 20AA
2014/01/27 20:47:38 565010 r skysat [smargo] classD0 ins7E11: Scheduling card reset for TA1 change from 13 to 15
2014/01/27 20:47:38 565010 r skysat [smargo] found card system videoguard2
2014/01/27 20:47:38 565010 r skysat [videoguard2] THIS WAS A SUCCESFULL START ATTEMPT No 1 out of max alloted of 1
2014/01/27 20:47:38 565010 r skysat [videoguard2] card detected
2014/01/27 20:47:38 565010 r skysat [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
2014/01/27 20:47:46 565010 r skysat [smargo] Error activating card.
2014/01/27 20:48:03 0 --- Skipped 2 duplicated log lines ---
2014/01/27 20:48:03 565010 r skysat [smargo] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/01/27 20:48:03 565010 r skysat [smargo] card initializing error
2014/01/27 20:48:04 0 s init for all local cards done
2014/01/27 20:48:04 0 s anti cascading disabled

 

[4gx35]

AW: Oscam an Fritzbox 7390 mit SMargo und V14

dann poste mal die reader config, das protocol heisst smartreader