O compile funktioniert nicht.

thronis · 2. Januar 2017

Guten Morgen und ein frohes Neues Jahr zusammen.

Wollte gerade Oscam updaten und habe folgende Fehlermeldung erhalten:

Du musst Regestriert sein, um das angehängte Bild zusehen.

Woran liegt das und was kann ich tun?

Danke

Alex · 2. Januar 2017

Liegt in dem Fall aber net an IPC/o compile. Sondern am Sourcecode. Generell die Lösung ist folgende:
Lösch' mal /tmp/compile und versuch es erneut:

Code:

rm -r /tmp/compile

Kann aber die aktuelle Version auch nicht kompilieren:

Code:

-- The C compiler identification is GNU 4.8.4
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Looking for pthread.h
-- Looking for pthread.h - found
--   pthread found. Adding pthread support
-- Looking for openssl/aes.h
-- Looking for openssl/aes.h - found
--  SSL IS NOT INCLUDED IN THIS COMPILATION
-- Found OpenSSL: /usr/lib/x86_64-linux-gnu/libssl.so;/usr/lib/x86_64-linux-gnu/libcrypto.so (found version "1.0.1f")
--   openssl found.
-- Looking for time.h
-- Looking for time.h - found
--   librt found (needed by libusb).
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - found
--  libusb 1.0 found (libusb-1.0.so) Adding smartreader support
-- Looking for PCSC/wintypes.h
-- Looking for PCSC/wintypes.h - found
--   PCSC headers found (/usr/include/PCSC). Adding PCSC support
HOSTCC    webif/pages_gen
GEN    webif/pages.c
GEN    Compressed 433520 template bytes into 177964 bytes. 255556 saved bytes (58.95%).
-- The CXX compiler identification is GNU 4.8.4
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Utils: operating system: Linux
-- Utils: target system: x86_64-linux-gnu
--  utils use system libusb functions
--
--
--   operating system: Linux
--   target system: x86_64-linux-gnu
--   revision: 11303
--   use system libcrypto functions
--   use system pcsc functions
--   use system pthread functions
--   use system libusb functions
--
-- Configuring done
-- Generating done
-- Build files have been written to: /tmp/compile/oscam-svn/build_dir
 
Folgendes Kompilieren kann einige Zeit in Anspruch nehmen...
 
Druecken Sie bitte <Enter> um fortzufahren...
Scanning dependencies of target svnversion-log
Scanning dependencies of target csmodules
Scanning dependencies of target csreaders
[  0%] Built target svnversion-log
Scanning dependencies of target svnversion
[  0%] Built target svnversion
Scanning dependencies of target csctapi
[  1%] [  2%] Building C object CMakeFiles/csreaders.dir/reader-viaccess.o
Building C object CMakeFiles/csmodules.dir/module-camd35-cacheex.o
[  3%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_cool.o
[  4%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_smargo.o
[  5%] Building C object CMakeFiles/csmodules.dir/module-cccam-cacheex.o
[  5%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_pcsc.o
[  5%] Building C object CMakeFiles/csmodules.dir/module-led.o
[  6%] [  7%] Building C object csctapi/CMakeFiles/csctapi.dir/io_serial.o
Building C object CMakeFiles/csmodules.dir/module-dvbapi-chancache.o
[  8%] Building C object CMakeFiles/csmodules.dir/module-gbox.o
[  9%] Building C object CMakeFiles/csreaders.dir/reader-seca.o
[ 10%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_mp35.o
[ 11%] Building C object csctapi/CMakeFiles/csctapi.dir/protocol_t1.o
[ 12%] Building C object CMakeFiles/csreaders.dir/reader-dre.o
[ 12%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_azbox.o
[ 13%] Building C object csctapi/CMakeFiles/csctapi.dir/protocol_t0.o
[ 14%] Building C object CMakeFiles/csmodules.dir/module-webif.o
[ 15%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_stapi.o
/tmp/compile/oscam-svn/module-webif.c: In function ‘send_oscam_config_global’:
/tmp/compile/oscam-svn/module-webif.c:713:61: error: ‘struct s_config’ has no member named ‘disablecrccws’
  tpl_addVar(vars, TPLADD, "DISABLECRCCWSCHECKEDGLOBAL", (cfg.disablecrccws == 1) ? "checked" : "");
                                                             ^
/tmp/compile/oscam-svn/module-webif.c:715:24: error: ‘struct s_config’ has no member named ‘disablecrccws_only_for’
  value = mk_t_ftab(&cfg.disablecrccws_only_for);
                        ^
/tmp/compile/oscam-svn/module-webif.c: In function ‘send_oscam_reader_config’:
/tmp/compile/oscam-svn/module-webif.c:2069:24: error: ‘struct s_reader’ has no member named ‘disablecrccws_only_for’
  value = mk_t_ftab(&rdr->disablecrccws_only_for);
                        ^
[ 16%] [ 17%] Building C object CMakeFiles/csreaders.dir/reader-bulcrypt.o
Building C object csctapi/CMakeFiles/csctapi.dir/ifd_sci.o
/tmp/compile/oscam-svn/module-webif.c: In function ‘send_oscam_user_config_edit’:
/tmp/compile/oscam-svn/module-webif.c:3227:57: error: ‘struct s_auth’ has no member named ‘disablecrccacheex’
  tpl_addVar(vars, TPLADD, "DISABLECRCCEX4USER", (account->disablecrccacheex == 1) ? "checked" : "");
                                                         ^
/tmp/compile/oscam-svn/module-webif.c:3228:28: error: ‘struct s_auth’ has no member named ‘disablecrccacheex_only_for’
  value = mk_t_ftab(&account->disablecrccacheex_only_for);
                            ^
make[2]: *** [CMakeFiles/csmodules.dir/module-webif.o] Fehler 1
make[1]: *** [CMakeFiles/csmodules.dir/all] Fehler 2
make[1]: *** Auf noch nicht beendete Prozesse wird gewartet …
[ 17%] Building C object CMakeFiles/csreaders.dir/reader-dre-common.o
[ 18%] Building C object CMakeFiles/csreaders.dir/reader-common.o
[ 19%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_stinger.o
[ 19%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_phoenix.o
[ 20%] Building C object CMakeFiles/csreaders.dir/reader-irdeto.o
[ 21%] Building C object CMakeFiles/csreaders.dir/reader-dgcrypt.o
[ 22%] Building C object csctapi/CMakeFiles/csctapi.dir/icc_async.o
[ 22%] Building C object CMakeFiles/csreaders.dir/reader-conax.o
[ 23%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_smartreader.o
[ 24%] Building C object CMakeFiles/csreaders.dir/reader-griffin.o
[ 25%] Building C object CMakeFiles/csreaders.dir/reader-videoguard-common.o
[ 26%] Building C object CMakeFiles/csreaders.dir/reader-cryptoworks.o
[ 27%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_db2com.o
[ 28%] Building C object CMakeFiles/csreaders.dir/reader-dre-st20.o
[ 28%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_sc8in1.o
[ 28%] Building C object CMakeFiles/csreaders.dir/reader-dre-cas.o
[ 29%] Building C object CMakeFiles/csreaders.dir/reader-videoguard2.o
[ 30%] Building C object csctapi/CMakeFiles/csctapi.dir/atr.o
[ 31%] Building C object CMakeFiles/csreaders.dir/reader-videoguard12.o
[ 32%] Building C object CMakeFiles/csreaders.dir/reader-nagra.o
[ 32%] Building C object CMakeFiles/csreaders.dir/reader-videoguard1.o
[ 33%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_drecas.o
[ 34%] Building C object CMakeFiles/csreaders.dir/reader-tongfang.o
Linking C static library libcsctapi.a
[ 34%] Built target csctapi
Linking C static library libcsreaders.a
[ 34%] Built target csreaders
make: *** [all] Fehler 2
 ERROR: compile fehlgeschlagen? Abbruch!

Code:

-- The C compiler identification is GNU 4.8.4
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Looking for pthread.h
-- Looking for pthread.h - found
--   pthread found. Adding pthread support
-- Looking for openssl/aes.h
-- Looking for openssl/aes.h - found
--  SSL IS NOT INCLUDED IN THIS COMPILATION
-- Found OpenSSL: /usr/lib/x86_64-linux-gnu/libssl.so;/usr/lib/x86_64-linux-gnu/libcrypto.so (found version "1.0.1f")
--   openssl found.
-- Looking for time.h
-- Looking for time.h - found
--   librt found (needed by libusb).
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - found
-- Looking for libusb-1.0/libusb.h
-- Looking for libusb-1.0/libusb.h - found
--  libusb 1.0 found (libusb-1.0.so) Adding smartreader support
-- Looking for PCSC/wintypes.h
-- Looking for PCSC/wintypes.h - found
--   PCSC headers found (/usr/include/PCSC). Adding PCSC support
HOSTCC    webif/pages_gen
GEN    webif/pages.c
GEN    Compressed 433520 template bytes into 177964 bytes. 255556 saved bytes (58.95%).
-- The CXX compiler identification is GNU 4.8.4
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Utils: operating system: Linux
-- Utils: target system: x86_64-linux-gnu
--  utils use system libusb functions
--
--
--   operating system: Linux
--   target system: x86_64-linux-gnu
--   revision: 11303
--   use system libcrypto functions
--   use system pcsc functions
--   use system pthread functions
--   use system libusb functions
--
-- Configuring done
-- Generating done
-- Build files have been written to: /tmp/compile/oscam-svn/build_dir
 
Folgendes Kompilieren kann einige Zeit in Anspruch nehmen...
 
Druecken Sie bitte <Enter> um fortzufahren...
Scanning dependencies of target svnversion-log
Scanning dependencies of target csmodules
Scanning dependencies of target csreaders
[  0%] Built target svnversion-log
Scanning dependencies of target svnversion
[  0%] Built target svnversion
Scanning dependencies of target csctapi
[  1%] [  2%] Building C object CMakeFiles/csreaders.dir/reader-viaccess.o
Building C object CMakeFiles/csmodules.dir/module-camd35-cacheex.o
[  3%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_cool.o
[  4%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_smargo.o
[  5%] Building C object CMakeFiles/csmodules.dir/module-cccam-cacheex.o
[  5%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_pcsc.o
[  5%] Building C object CMakeFiles/csmodules.dir/module-led.o
[  6%] [  7%] Building C object csctapi/CMakeFiles/csctapi.dir/io_serial.o
Building C object CMakeFiles/csmodules.dir/module-dvbapi-chancache.o
[  8%] Building C object CMakeFiles/csmodules.dir/module-gbox.o
[  9%] Building C object CMakeFiles/csreaders.dir/reader-seca.o
[ 10%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_mp35.o
[ 11%] Building C object csctapi/CMakeFiles/csctapi.dir/protocol_t1.o
[ 12%] Building C object CMakeFiles/csreaders.dir/reader-dre.o
[ 12%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_azbox.o
[ 13%] Building C object csctapi/CMakeFiles/csctapi.dir/protocol_t0.o
[ 14%] Building C object CMakeFiles/csmodules.dir/module-webif.o
[ 15%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_stapi.o
/tmp/compile/oscam-svn/module-webif.c: In function ‘send_oscam_config_global’:
/tmp/compile/oscam-svn/module-webif.c:713:61: error: ‘struct s_config’ has no member named ‘disablecrccws’
  tpl_addVar(vars, TPLADD, "DISABLECRCCWSCHECKEDGLOBAL", (cfg.disablecrccws == 1) ? "checked" : "");
                                                             ^
/tmp/compile/oscam-svn/module-webif.c:715:24: error: ‘struct s_config’ has no member named ‘disablecrccws_only_for’
  value = mk_t_ftab(&cfg.disablecrccws_only_for);
                        ^
/tmp/compile/oscam-svn/module-webif.c: In function ‘send_oscam_reader_config’:
/tmp/compile/oscam-svn/module-webif.c:2069:24: error: ‘struct s_reader’ has no member named ‘disablecrccws_only_for’
  value = mk_t_ftab(&rdr->disablecrccws_only_for);
                        ^
[ 16%] [ 17%] Building C object CMakeFiles/csreaders.dir/reader-bulcrypt.o
Building C object csctapi/CMakeFiles/csctapi.dir/ifd_sci.o
/tmp/compile/oscam-svn/module-webif.c: In function ‘send_oscam_user_config_edit’:
/tmp/compile/oscam-svn/module-webif.c:3227:57: error: ‘struct s_auth’ has no member named ‘disablecrccacheex’
  tpl_addVar(vars, TPLADD, "DISABLECRCCEX4USER", (account->disablecrccacheex == 1) ? "checked" : "");
                                                         ^
/tmp/compile/oscam-svn/module-webif.c:3228:28: error: ‘struct s_auth’ has no member named ‘disablecrccacheex_only_for’
  value = mk_t_ftab(&account->disablecrccacheex_only_for);
                            ^
make[2]: *** [CMakeFiles/csmodules.dir/module-webif.o] Fehler 1
make[1]: *** [CMakeFiles/csmodules.dir/all] Fehler 2
make[1]: *** Auf noch nicht beendete Prozesse wird gewartet …
[ 17%] Building C object CMakeFiles/csreaders.dir/reader-dre-common.o
[ 18%] Building C object CMakeFiles/csreaders.dir/reader-common.o
[ 19%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_stinger.o
[ 19%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_phoenix.o
[ 20%] Building C object CMakeFiles/csreaders.dir/reader-irdeto.o
[ 21%] Building C object CMakeFiles/csreaders.dir/reader-dgcrypt.o
[ 22%] Building C object csctapi/CMakeFiles/csctapi.dir/icc_async.o
[ 22%] Building C object CMakeFiles/csreaders.dir/reader-conax.o
[ 23%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_smartreader.o
[ 24%] Building C object CMakeFiles/csreaders.dir/reader-griffin.o
[ 25%] Building C object CMakeFiles/csreaders.dir/reader-videoguard-common.o
[ 26%] Building C object CMakeFiles/csreaders.dir/reader-cryptoworks.o
[ 27%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_db2com.o
[ 28%] Building C object CMakeFiles/csreaders.dir/reader-dre-st20.o
[ 28%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_sc8in1.o
[ 28%] Building C object CMakeFiles/csreaders.dir/reader-dre-cas.o
[ 29%] Building C object CMakeFiles/csreaders.dir/reader-videoguard2.o
[ 30%] Building C object csctapi/CMakeFiles/csctapi.dir/atr.o
[ 31%] Building C object CMakeFiles/csreaders.dir/reader-videoguard12.o
[ 32%] Building C object CMakeFiles/csreaders.dir/reader-nagra.o
[ 32%] Building C object CMakeFiles/csreaders.dir/reader-videoguard1.o
[ 33%] Building C object csctapi/CMakeFiles/csctapi.dir/ifd_drecas.o
[ 34%] Building C object CMakeFiles/csreaders.dir/reader-tongfang.o
Linking C static library libcsctapi.a
[ 34%] Built target csctapi
Linking C static library libcsreaders.a
[ 34%] Built target csreaders
make: *** [all] Fehler 2
 ERROR: compile fehlgeschlagen? Abbruch!

Versuch mal die 11302 die ghet bei mir bauen. Denke mal das Gorgone das heute noch fixen wird

thronis · 2. Januar 2017

Danke für die Info.
11302 funktionierte

Wolke68 · 2. Januar 2017

ist gefixt

lokipoki · 6. Januar 2017

Hab auch eine Fehlermeldung bei der Version 11314

You have selected the following components:

Add-ons:
WEBIF : on
WEBIF_LIVELOG : on
WEBIF_JQUERY : on
TOUCH : on
WITH_SSL : off
HAVE_DVBAPI : on
READ_SDT_CHARSETS : on
IRDETO_GUESSING : on
CS_ANTICASC : on
WITH_DEBUG : on
MODULE_MONITOR : on
WITH_LB : on
CS_CACHEEX : on
CW_CYCLE_CHECK : on
LCDSUPPORT : off
LEDSUPPORT : off
CLOCKFIX : on
IPV6SUPPORT : off

Protocols:
MODULE_CAMD33 : off
MODULE_CAMD35 : on
MODULE_CAMD35_TCP : on
MODULE_NEWCAMD : on
MODULE_CCCAM : on
MODULE_CCCSHARE : on
MODULE_GBOX : on
MODULE_RADEGAST : on
MODULE_SCAM : on
MODULE_SERIAL : on
MODULE_CONSTCW : on
MODULE_PANDORA : on
MODULE_GHTTP : on

Readers:
READER_NAGRA : on
READER_IRDETO : on
READER_CONAX : on
READER_CRYPTOWORKS : on
READER_SECA : on
READER_VIACCESS : on
READER_VIDEOGUARD : on
READER_DRE : on
READER_TONGFANG : on
READER_BULCRYPT : on
READER_GRIFFIN : on
READER_DGCRYPT : on

Card readers:
CARDREADER_PHOENIX : on
CARDREADER_INTERNAL : on
CARDREADER_SC8IN1 : on
CARDREADER_MP35 : on
CARDREADER_SMARGO : on
CARDREADER_DB2COM : on
CARDREADER_STAPI : on
CARDREADER_STAPI5 : on
CARDREADER_STINGER : on
CARDREADER_DRECAS : on

Bereite 32bit Kompilierung vor..

-- The C compiler identification is GNU 4.6.3
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- broken
CMake Error at /usr/share/cmake-2.8/Modules/CMakeTestCCompiler.cmake:52 (MESSAGE):
The C compiler "/usr/bin/gcc" is not able to compile a simple test program.

It fails with the following output:

Change Dir: /tmp/compile/oscam-svn/build_dir/CMakeFiles/CMakeTmp

Run Build Command:/usr/bin/make "cmTryCompileExec2628200740/fast"

/usr/bin/make -f CMakeFiles/cmTryCompileExec2628200740.dir/build.make
CMakeFiles/cmTryCompileExec2628200740.dir/build

make[1]: Entering directory
`/tmp/compile/oscam-svn/build_dir/CMakeFiles/CMakeTmp'

/usr/bin/cmake -E cmake_progress_report
/tmp/compile/oscam-svn/build_dir/CMakeFiles/CMakeTmp/CMakeFiles 1

Building C object
CMakeFiles/cmTryCompileExec2628200740.dir/testCCompiler.c.o

/usr/bin/gcc -o CMakeFiles/cmTryCompileExec2628200740.dir/testCCompiler.c.o
-c /tmp/compile/oscam-svn/build_dir/CMakeFiles/CMakeTmp/testCCompiler.c

Linking C executable cmTryCompileExec2628200740

/usr/bin/cmake -E cmake_link_script
CMakeFiles/cmTryCompileExec2628200740.dir/link.txt --verbose=1

/usr/bin/gcc CMakeFiles/cmTryCompileExec2628200740.dir/testCCompiler.c.o -o
cmTryCompileExec2628200740 -rdynamic

collect2: ld terminated with signal 4 [Illegal instruction]

make[1]: Leaving directory
`/tmp/compile/oscam-svn/build_dir/CMakeFiles/CMakeTmp'

make[1]: *** [cmTryCompileExec2628200740] Error 1

make: *** [cmTryCompileExec2628200740/fast] Error 2

CMake will not be able to correctly generate this project.
Call Stack (most recent call first):
CMakeLists.txt:1 (project)

-- Configuring incomplete, errors occurred!

Folgendes kompilieren kann einige Zeit in Anspruch nehmen...

Druecken Sie bitte <Enter> um fortzufahren...
make: *** No targets specified and no makefile found. Stop.
ERROR: compile fehlgeschlagen? Abbruch!

gehe ich eine Revision zurück, gibts folgendes:

Moechten Sie eine bestimmte svn Revisionsnummer kompilieren oder die aktuelle?
[4801] | []Aktuelle 11312
Ungueltige Eingabe!

Derek Buegel · 6. Januar 2017

Code:

wget -O/var/emu/script/oscam-compile.sh ipc.pebkac.at/ipc/scripts/oscam-compile.sh && chmod +x /var/emu/script/oscam-compile.sh

Bitte mal eingeben und noch mal versuchen. Hab gestern erst compiliert.

MfG
Gibt es eine 11312? 11313 gibt es, die hab ich compiliert.

lokipoki · 7. Januar 2017

So, hab das Problem.

[ 3.794297] usb 1-1.1: Product: FT232R USB UART
[ 3.798850] usb 1-1.1: Manufacturer: FTDI
[ 3.802878] usb 1-1.1: SerialNumber: A901LMRL
[ 3.883863] usb 1-1.2: new full-speed USB device number 4 using orion-ehci
[ 3.903455] rtc-mv f1010300.rtc: internal RTC not ticking
[ 3.909104] i2c /dev entries driver
[ 3.914053] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.919857] drop_monitor: Initializing network drop monitor service
[ 3.926433] TCP: cubic registered
[ 3.929769] NET: Registered protocol family 17
[ 3.934389] Key type dns_resolver registered
[ 3.939527] Loading compiled-in X.509 certificates
[ 3.944408] registered taskstats version 1
[ 3.949549] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 3.957043] PM: Hibernation image not present or could not be loaded.
[ 3.958099] Freeing unused kernel memory: 268K (c076b000 - c07ae000)
[ 4.010653] usb 1-1.2: New USB device found, idVendor=0403, idProduct=6001
[ 4.022437] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.030678] udevd[58]: starting version 175
[ 4.047998] usb 1-1.2: Product: FT232R USB UART
[ 4.052560] usb 1-1.2: Manufacturer: FTDI
[ 4.063557] usb 1-1.2: SerialNumber: AH01B8W5
[ 4.163897] usb 1-1.4: new high-speed USB device number 5 using orion-ehci
[ 4.291152] usb 1-1.4: New USB device found, idVendor=8564, idProduct=1000
[ 4.303538] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.310924] usb 1-1.4: Product: Mass Storage Device
[ 4.329164] usb 1-1.4: Manufacturer: JetFlash
[ 4.339578] usb 1-1.4: SerialNumber: UXBKOSRZ
[ 4.631059] SCSI subsystem initialized
[ 4.639494] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 4.646259] scsi host0: usb-storage 1-1.4:1.0
[ 4.652445] usbcore: registered new interface driver usb-storage
[ 4.661648] usbcore: registered new interface driver uas
[ 5.645599] scsi 0:0:0:0: Direct-Access JetFlash Transcend 4GB 8.07 PQ: 0 ANSI: 4
[ 5.670925] sd 0:0:0:0: [sda] 7839744 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 5.679775] sd 0:0:0:0: [sda] Write Protect is off
[ 5.684660] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 5.685517] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 5.702261] sda: sda1 sda2
[ 5.709520] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 5.727245] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.244373] udevd[262]: starting version 175
[ 16.937317] orion_wdt: Initial timeout 21 sec
[ 17.075887] USB Power: 5000 mV
[ 17.141806] usbcore: registered new interface driver usbserial
[ 17.202842] usbcore: registered new interface driver usbserial_generic
[ 17.241124] random: nonblocking pool is initialized
[ 17.248314] usbserial: USB Serial support registered for generic
[ 17.315900] usbcore: registered new interface driver ftdi_sio
[ 17.321809] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 17.416893] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[ 17.472672] usb 1-1.1: Detected FT232RL
[ 17.502433] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 17.547910] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 17.555839] usb 1-1.2: Detected FT232RL
[ 17.561065] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB1
[ 18.561341] Adding 524284k swap on /dev/sda2. Priority:-1 extents:1 across:524284k FS
[ 29.862976] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 34.980083] NET: Registered protocol family 10
[ 49.180032] tun: Universal TUN/TAP device driver, 1.6
[ 49.190738] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 52.045907] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 52.176853] nf_conntrack version 0.5.0 (3930 buckets, 15720 max)
[1106940.958616] ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32
[1106940.966787] ftdi_sio ttyUSB0: usb_serial_generic_read_bulk_callback - urb stopped: -32
[1106941.198108] usb 1-1-port1: disabled by hub (EMI?), re-enabling...
[1106941.205260] usb 1-1.1: USB disconnect, device number 3
[1106941.210955] ftdi_sio ttyUSB0: error from flowcontrol urb
[1106941.217863] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[1106941.230175] ftdi_sio 1-1.1:1.0: device disconnected
[1106941.473745] usb 1-1.1: new full-speed USB device number 6 using orion-ehci
[1106941.590618] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
[1106941.597918] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[1106941.606037] usb 1-1.1: Product: FT232R USB UART
[1106941.610868] usb 1-1.1: Manufacturer: FTDI
[1106941.615586] usb 1-1.1: SerialNumber: A901LMRL
[1106941.626376] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[1106941.634049] usb 1-1.1: Detected FT232RL
[1106941.639520] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB2
[2042027.380617] ftdi_sio ttyUSB2: usb_serial_generic_read_bulk_callback - urb stopped: -32
[2042027.388999] ftdi_sio ttyUSB2: usb_serial_generic_read_bulk_callback - urb stopped: -32
[2042027.397781] ftdi_sio ttyUSB2: failed to get modem status: -32
[2042027.534259] usb 1-1-port1: disabled by hub (EMI?), re-enabling...
[2042027.552740] usb 1-1.1: USB disconnect, device number 6
[2042027.568993] ftdi_sio ttyUSB2: error from flowcontrol urb
[2042027.585363] ftdi_sio ttyUSB2: FTDI USB Serial Device converter now disconnected from ttyUSB2
[2042027.613621] ftdi_sio 1-1.1:1.0: device disconnected
[2042027.863886] usb 1-1.1: new full-speed USB device number 7 using orion-ehci
[2042027.999869] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
[2042028.007142] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2042028.015270] usb 1-1.1: Product: FT232R USB UART
[2042028.020124] usb 1-1.1: Manufacturer: FTDI
[2042028.024867] usb 1-1.1: SerialNumber: A901LMRL
[2042028.034924] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[2042028.042420] usb 1-1.1: Detected FT232RL
[2042028.047857] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[2060825.614237] usb 1-1-port1: disabled by hub (EMI?), re-enabling...
[2060825.620869] usb 1-1.1: USB disconnect, device number 7
[2060825.630275] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[2060825.640241] ftdi_sio 1-1.1:1.0: device disconnected
[2060825.893759] usb 1-1.1: new full-speed USB device number 8 using orion-ehci
[2060826.010615] usb 1-1.1: New USB device found, idVendor=0403, idProduct=6001
[2060826.017873] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[2060826.026014] usb 1-1.1: Product: FT232R USB UART
[2060826.030863] usb 1-1.1: Manufacturer: FTDI
[2060826.035576] usb 1-1.1: SerialNumber: A901LMRL
[2060826.047922] ftdi_sio 1-1.1:1.0: FTDI USB Serial Device converter detected
[2060826.059834] usb 1-1.1: Detected FT232RL
[2060826.065606] usb 1-1.1: FTDI USB Serial Device converter now attached to ttyUSB0
[2097676.186826] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.194485] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.201317] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.210412] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.218134] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.225821] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.232531] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.240758] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.247496] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.255574] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.262246] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.270423] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.277140] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.285233] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.291905] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.300000] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.306733] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.314829] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.321518] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.329643] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.336370] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.344467] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.351134] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.359198] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.365943] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.374084] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.380780] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.388905] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.395632] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.403211] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.410417] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.418048] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.425136] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.432721] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.439835] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.447467] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.454564] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.462152] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.469251] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.476952] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.484075] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.491660] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.498770] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.506401] EXT2-fs (sda1): error: remounting filesystem read-only
[2097676.513055] EXT2-fs (sda1): error: ext2_lookup: deleted inode referenced: 97926
[2097676.521293] EXT2-fs (sda1): error: remounting filesystem read-only
[2136112.759243] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended

Remount klappt nicht, denke der USB Stick wird den Geist aufgeben. So wie ich das sehe, Linux DVD booten, USB stick mounten und fsck laufen lassen oder hat jemand einen anderen Vorschlag? Neu Aufsetzen wird wohl das vernünftigste sein.........

Edit:

grep -a --null-data U-Boot /dev/mtd0ro
U-Boot 2011.12 (Feb 20 2012 - 21:21:59)
Pogoplug E02U-Boot
** Invalid partition type "%.32s" (expect "U-Boot")
U-Boot BUG at %s:%d!

Denke, der Pogo ist im Arsch.

Alex · 7. Januar 2017

Liest sich nicht gut. Frag da mal @Osprey oder @joerg999, ob denen noch was einfällt

lokipoki · 8. Januar 2017

Ich hab Gott sei dank einen Ersatz Pogo mit einem alten Debian 6 Image vor langer Zeit das ich nebenher als Webserver laufen lies. Werde denn man neu aufsetzen und ein Notsystem machen damit ich nur umstöpseln muss. Danach werd ich einfach eiskalt einen Reboot machen und sehen was Sache ist - wenn es dann in die Hose geht bin ich trotzdem wieder Online. Schade um das ganze System, hab da so viel rein gesteckt und weiß nicht mehr was ich alles gemacht und geändert habe. Aber das wichtigste werde ich im Read Modus noch bekommen.

O compile funktioniert nicht.

thronis

Freak

Anhänge

Alex

thronis

Freak

Wolke68

Ist oft hier

lokipoki

Guest

Derek Buegel

lokipoki

Guest

Alex

lokipoki

Guest

Ähnliche Themen

O compile funktioniert nicht.

thronis

Freak

Anhänge

Alex

thronis

Freak

Wolke68

Ist oft hier

lokipoki

Guest

Derek Buegel

lokipoki

Guest

Alex

lokipoki

Guest

Ähnliche Themen

Datenschutz & Transparenz

Datenschutz & Transparenz