AW: Newcs dbox2 telnet
ok ich habs verstanden was du meinst. war mir nicht so bewusst.
Habe nun es nach dem newcs cs2gbox gbox faq gemacht.
Folgende Problemchen:
cardserver2gbox gate 2.01 ( Mar 22 2005, 00:05:08 )
My IP 192.168.010.014 ID 8013 (192.168.10.14) pass B1013112, we are online
IP 192.168.010.014 Port 20401-20400 ID 9013 pass A1013112 sharelevel 5/5 (192.168.10.14)
connecting to ip 192.168.010.014/10001 ID 1628 ...
cardserver 192.168.10.14/10001 NOT responding !
connecting to ip 192.168.010.014/10002 ID 162B ...
cardserver 192.168.10.14/10002 NOT responding !
Total 1 UDP ports to monitor: 20401
Total 1 TCP ports to monitor: 12000
habe in der gbox.cfg V: {00 00}
aber im newcs stimmt irgendwas noch net.
<newCSconfig>
<readers name="Card Readers">
<device>
<name>multicam</name>
<type>phoenix</type>
<node>/dev/tts/1</node>
<mhz>600</mhz> <!-- or 357 -->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10002</newcamd_port>
<priority>round</priority> <!-- hard is default -->
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</deny>
</sid>
</device>
<device>
<name>cardreader</name>
<type>phoenix</type>
<node>/dev/tts/0</node>
<mhz>357</mhz> <!-- or 357 -->
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>yes</carddetect>
<newcamd_port>10001</newcamd_port>
<priority>round</priority> <!-- hard is default -->
<sid>
<allow>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</allow>
<deny>
<!-- valid value for id are:
4 numbers, if the service id is 3 numbers, add a 0 infront of it. -->
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10001</port>
<allow>all</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
</radegastserver>
<newcamdserver>
<enabled>yes</enabled>
<name>cardserv</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>local</name>
<password>local</password>
<au>on</au>
</user>
<readers>
<allow>multicam</allow>
<allow>cardreader</allow>
</readers>
</newcamdserver>
</newCSconfig>
Ich nutze eine Arena karte und PW(Neue) Karte.
da fällt mir gleich der ipk-key für arena ein. muss ich den in der newcs eintragen ?
danke für die hilfe
gruß sven