mein neue v14 steht bei log ERROR:

[cojo]

AW: mein neue v14 steht bei log ERROR:

deine karte hat einfach noch keine EMM gesehen,die musst du loggen und manuell schreiben

 

[forty]

AW: mein neue v14 steht bei log ERROR:

wenn mann kann ist einfach:emoticon-0106-cryin

 

[cojo]

AW: mein neue v14 steht bei log ERROR:

hier steht doch alles,halte dich einfach daran

https://www.digital-eliteboard.com/338886-loggen-mit-freischaltung.html

ändere aber vorher dein emmlogdir = /tmp/ in emmlogdir = /etc/ ab und starte oscam neu

 

[forty]

AW: mein neue v14 steht bei log ERROR:

mach sein die ich zu doof bin für so was aber ich komme nicht weiter

 

[cojo]

AW: mein neue v14 steht bei log ERROR:

lies doch mal meine Signatur und vergleiche deine config mit meiner,da ist auch ein Dreambox Beispiel,ist ja nun nicht so schwer.

 

[forty]

AW: mein neue v14 steht bei log ERROR:

Spoiler

• 2014/12/17 10:35: c anonymous (098C&000000/01FB/0017/98:16071765F31A4889B8A310A0A1FC02A1): not found (4 ms) by v14 - Sky Krimi
• 2014/12/17 10:35:
• c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 10:35: c anonymous (098C&000000/01FB/0017/98:16071765F31A4889B8A310A0A1FC02A1): not found (7 ms) by v14 - Sky Krimi
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 10:35:r v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
• 2014/12/17 10:35: r v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2014/12/17 10:35:r v14 [videoguard2] classD3 ins54: no cw --> No tier found
• 2014/12/17 10:35: r v14 [videoguard2] classD3 ins54: no cw --> Tier expired
• 2014/12/17 10:35: c anonymous (098C&000000/01FB/0017/98:16071765F31A4889B8A310A0A1FC02A1): not found (65 ms) by v14 - Sky Krimi
• 2014/12/17 10:35:
• c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 10:35: c anonymous (098C&000000/01FB/0017/98:16071765F31A4889B8A310A0A1FC02A1): not found (4 ms) by v14 - Sky Krimi
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 10:35: c anonymous (098C&000000/01FB/0017/98:16071765F31A4889B8A310A0A1FC02A1): not found (4 ms) by v14 - Sky Krimi
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 10:35: c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 10:35: r v14 [videoguard2] classD3 ins54: no cw --> Card isn't active
• 2014/12/17 10:35: r v14 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2014/12/17 10:35: r v14 [videoguard2] classD3 ins54: no cw --> No tier found

- - - - - - - - - -

die conf sind glaube ich ok

 

[dodo83]

AW: mein neue v14 steht bei log ERROR:

die conf sind glaube ich ok

glaube nicht, da

• 2014/12/17 10:35: c anonymous (098C&000000/01FB/0017/98:16071765F31A4889B8A310A0A1FC02A1): not found (4 ms) by v14 - Sky Krimi

der lokale user als ANONYMOUS angezeigt wird
daher wird das AU auch nicht gehen

 

[forty]

AW: mein neue v14 steht bei log ERROR:

erstemal viel danke am alle. soll ich mein cof posten?
un wenn du so nett bist rein gucken?

 

[dodo83]

AW: mein neue v14 steht bei log ERROR:

poste die doch erstmal

 

[forty]

AW: mein neue v14 steht bei log ERROR:

oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000
block_same_ip = 0
block_same_name = 0
emmlogdir = /tmp/

[cache]
max_time = 18

[cccam]
port = 12200
nodeid = 2310001A10931324
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
user = DVBApi
boxtype = dreambox

[webif]
httpport = 8888
httpuser = root
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httposcamlabel = OscamDreambox

oscam.server

Spoiler

[reader]
label = SkyV14_1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.user

Spoiler

[account]
user = DVBApi
keepalive = 1
au = 1
group = 1

[account]
disabled = 1
user = user
pwd = pwd
group = 1

 

[dodo83]

AW: mein neue v14 steht bei log ERROR:

änder mal ab:
oscam.conf

Spoiler

[global]
logfile = /tmp/oscam.log
logduplicatelines = 1
pidfile = /var/run/oscam.pid
bindwait = 20
unlockparental = 1
nice = -1
maxlogsize = 1000
block_same_ip = 0
block_same_name = 0
emmlogdir = /tmp/

[cache]
max_time = 18

[cccam]
port = 12200
nodeid = 2310001A10931324
version = 2.3.0

[dvbapi]
enabled = 1
au = 1
user = lokal
boxtype = dreambox

[webif]
httpport = 8888
httpuser = root
httprefresh = 10
httppollrefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httposcamlabel = OscamDreambox

oscam.server

Spoiler

[reader]
label = v14_1
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
ins7e11 = 15
detect = cd
mhz = 450
cardmhz = 2700
group = 1
emmcache = 1,1,10
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-u = 1
ndsversion = 2

oscam.user

Spoiler

[account]
user = lokal
au = v14_1
group = 1

[account]
disabled = 1
user = user
pwd = pwd
group = 1

starte OScam neu und poste das log ab Start bis zur sender Abfrage

 

[forty]

AW: mein neue v14 steht bei log ERROR:

danke ich werde das machen

 

[forty]

AW: mein neue v14 steht bei log ERROR:

Spoiler

• 2014/12/17 12:16:40 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r10071 (mipsel-oe-linux)
• 2014/12/17 12:16:40 0 s creating pidfile /var/run/oscam.pid with pid 872
• 2014/12/17 12:16:41 0 s userdb reloaded: 2 accounts loaded, 0 expired, 1 disabled
• 2014/12/17 12:16:41 0 s signal handling initialized
• 2014/12/17 12:16:41 0 s 213 service-id's loaded in 15 ms
• 2014/12/17 12:16:41 0 s 5 provid's loaded
• 2014/12/17 12:16:41 0 s cccam: initialized (fd=5, port=12200)
• 2014/12/17 12:16:41 0 s v14_1 [internal] creating thread for device /dev/sci0
• 2014/12/17 12:16:41 r v14_1 [internal] Reader initialized (device=/dev/sci0, detect=cd, pll max=27.00 MHz, wanted mhz=4.50 MHz
• 2014/12/17 12:16:41 0 s loadbalancer: can't read from file /tmp/.oscam/stat
• 2014/12/17 12:16:41 0 s waiting for local card init
• 2014/12/17 12:16:41 h webif: decompressed 157108 bytes back into 375816 bytes
• 2014/12/17 12:16:41 h HTTP Server running. ip=0.0.0.0 port=8888
• 2014/12/17 12:16:42 r v14_1 [internal] card detected
• 2014/12/17 12:16:44 r v14_1 [internal] ATR: 3F FD 15 25 02 50 80 0F 41 B0 0A 69 FF 4A 50 F0 00 00 50 31 03
• 2014/12/17 12:16:44 r v14_1 [internal] Init card protocol T0, FI=1, F=372, D=16, N=2
• 2014/12/17 12:16:44 r v14_1 [internal] Calculated work ETU is 5.17 us reader mhz = 450
• 2014/12/17 12:16:44 r v14_1 [internal] PLL Reader: ATR Fsmax is 5 MHz, clocking card to 4.50 Mhz (nearest possible mhz specified reader->cardmhz)
• 2014/12/17 12:16:45 r v14_1 [internal] Card type: P1TV
• 2014/12/17 12:16:45 r v14_1 [internal] Rom version: 20AA
• 2014/12/17 12:16:45 r v14_1 [internal] Credit available on card: 0 euro
• 2014/12/17 12:16:45 r v14_1 [internal] Extended 4C detected
• 2014/12/17 12:16:45 r v14_1 [internal] FuseByte: 00
• 2014/12/17 12:16:45 r v14_1 [internal] Region Code:
• 2014/12/17 12:16:45 r v14_1 [internal] Country Code: DEU
• 2014/12/17 12:16:45 r v14_1 [internal] Pincode read: 9202
• 2014/12/17 12:16:45 r v14_1 [internal] PCB settings: FF FF FF FF
• 2014/12/17 12:16:45 r v14_1 [internal] Parental control disabled
• 2014/12/17 12:16:45 r v14_1 [internal] type: VideoGuard Sky Austria/Germany (098C), caid: 098C
• 2014/12/17 12:16:45 r v14_1 [internal] serial: ########, BoxID: ########, baseyear: 2004
• 2014/12/17 12:16:45 r v14_1 [internal] ready for requests
• 2014/12/17 12:16:45 r v14_1 [internal] found card system videoguard2
• 2014/12/17 12:16:45 r v14_1 [videoguard2] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
• 2014/12/17 12:16:45 r v14_1 [videoguard2] card detected
• 2014/12/17 12:16:45 r v14_1 [videoguard2] type: VideoGuard Sky Austria/Germany (098C)
• 2014/12/17 12:16:48 0 s init for all local cards done
• 2014/12/17 12:16:48 0 s anti cascading disabled
• 2014/12/17 12:16:48 c plain dvbapi-client granted (lokal, au=on (1 reader))
• 2014/12/17 12:16:48 c [DVBAPI] Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 1
• 2014/12/17 12:18:06 c [NEW ECMPID #0] CAID: 1702 ECM_PID: 1740 PROVID: 000000
• 2014/12/17 12:18:06 c [NEW ECMPID #1] CAID: 1833 ECM_PID: 1840 PROVID: 000000
• 2014/12/17 12:18:06 c [NEW ECMPID #2] CAID: 09C4 ECM_PID: 1B40 PROVID: 000000
• 2014/12/17 12:18:06 c [NEW ECMPID #3] CAID: 09AF ECM_PID: 1F40 PROVID: 000000
• 2014/12/17 12:18:06 c [NEW ECMPID #4] CAID: 098C ECM_PID: 1A40 PROVID: 000000
• 2014/12/17 12:18:06 c Found 5 ECMpids and 2 STREAMpids in PMT
• 2014/12/17 12:18:06 c [DVBAPI] Receiver wants to demux srvid 0017 on adapter 0000 camask 0008 index 0003 pmtpid 0061
• 2014/12/17 12:18:06 c New program number: 0017 (Sky Krimi) [pmt_list_management 3]
• 2014/12/17 12:18:06 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 12:18:06 r v14_1 [videoguard2] classD3 ins54: no cw --> Card isn't active
• 2014/12/17 12:18:06 r v14_1 [videoguard2] classD3 ins54: no cw --> Card needs pairing/extra data
• 2014/12/17 12:18:06 r v14_1 [videoguard2] classD3 ins54: no cw --> No tier found
• 2014/12/17 12:18:06 r v14_1 [videoguard2] classD3 ins54: no cw --> Tier expired
• 2014/12/17 12:18:06 c lokal (098C&000000/01FB/0017/98:5304CE501676A8B0C644287B4CF027E4): not found (110 ms) by v14_1 - Sky Krimi
• 2014/12/17 12:18:06 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 12:18:07 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 12:18:07 c lokal (098C&000000/01FB/0017/98:5304CE501676A8B0C644287B4CF027E4): not found (4 ms) by v14_1 - Sky Krimi
• 2014/12/17 12:18:07 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 12:18:07 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 12:18:08 c lokal (098C&000000/01FB/0017/98:5304CE501676A8B0C644287B4CF027E4): not found (4 ms) by v14_1 - Sky Krimi
• 2014/12/17 12:18:08 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids!
• 2014/12/17 12:18:09 c [DVBAPI] Demuxer #0 trying to descramble PID #4 CAID 098C PROVID 000000 ECMPID 1A40 ANY CHID PMTPID 0061 VPID 01FF
• 2014/12/17 12:18:09 c lokal (098C&000000/01FB/0017/98:5304CE501676A8B0C644287B4CF027E4): not found (5 ms) by v14_1 - Sky Krimi

2014/12/17 12:18:09 c [DVBAPI] Demuxer #0 (re)starting decodingrequests on all 5 ecmpids

- - - - - - - - - -

immer noch schwarz :emoticon-0106-cryin

 

[dia]

AW: mein neue v14 steht bei log ERROR:

war die karte schon mal hell
gesehen
expired date abgelaufen

lass dir eine neue freischaltung online schicken

 

[forty]

AW: mein neue v14 steht bei log ERROR:

nein seit gestern freigeschalten