- Registriert
- 7. Februar 2008
- Beiträge
- 2.975
- Reaktionspunkte
- 2.416
- Punkte
- 373
Hallo,
ich benutze die Mbox und Newcs mit meiner Dbox 2.
Wenn ich die Box starte funktioniert alles. Nach einer weile geht jedoch alles über KD nicht mehr. Obwohl ich es im Abo habe. Schalte ich auf Sky funktioniert dies alles einwandfrei. Nach einem EMU Reset funktioniert wieder alles für eine weile, dannach wieder nur SKY. Dies ist sowohl mit Internetverbidnung wie auch ohne der Fall. Im Mbox Control Center wird alles als korrekt angezeigt und meine Server sind online.
NewCS Config:
cwshare.cfg
mbox.cfg
Mitschnitt:
ich benutze die Mbox und Newcs mit meiner Dbox 2.
Wenn ich die Box starte funktioniert alles. Nach einer weile geht jedoch alles über KD nicht mehr. Obwohl ich es im Abo habe. Schalte ich auf Sky funktioniert dies alles einwandfrei. Nach einem EMU Reset funktioniert wieder alles für eine weile, dannach wieder nur SKY. Dies ist sowohl mit Internetverbidnung wie auch ohne der Fall. Im Mbox Control Center wird alles als korrekt angezeigt und meine Server sind online.
NewCS Config:
Code:
<?xml version="1.0"?>
<newCSconfig>
<readers name="Card Readers">
<device>
<name>CardReader</name>
<type>dbox</type>
<mhz>600</mhz>
<node>/dev/tts/0</node>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>no</blocksa>
<blockua>no</blockua>
<blockga>no</blockga>
<boxid></boxid>
<PTShandshake>no</PTShandshake>
<Seca-PPV>no</Seca-PPV>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>34000</newcamd_port>
<autosid>yes</autosid>
<priority>round</priority>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10003</port>
<allow>ALL</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>30</ecm>
</cache>
<httpd>
<server>
<port>8080</port>
<enabled>yes</enabled>
</server>
<user>
<name>digital</name>
<password>eliteboard</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<debug>
<password>NewCSpwd</password>
<level>internal</level>
<type>all</type>
<output>all</output>
<console_options>all</console_options>
<udp_host>192.168.0.100</udp_host>
<udp_port>1001</udp_port>
<udp_options>all</udp_options>
<tcp_port>1001</tcp_port>
<tcp_options>all</tcp_options>
</debug>
<newcamdserver>
<enabled>yes</enabled>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<name>newcs</name>
<userfile>/tmp/users.txt</userfile>
<user>
<name>BaNaNa</name>
<password>Beck</password>
<spider>on</spider>
<sidoverride>off</sidoverride>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>
Code:
M: { ***.mine.nu { **** }}
C: { 127.0.0.1 34000 BaNaNa Beck 01 02 03 04 05 06 07 08 09 10 11 12 13 14 } { 10 } { 17220000:17220000, }
D: {sadasdafda
I: { 02 }
X: { 05 }
N: { 00 01 03 1F 5000 6000 }
Code:
//mbox.cfg EXPLANATION and EXAMPLES
A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0
D: { 1 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//default disabled
B: { 0 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled
Z: { 13 } { 192.168.0.100 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
Q: { 300 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
//V: { card_type device clock inverse_Reset}
#V: { 3 1 3571200 0 }
#V: { 3 2 3571200 1 }
// card_type:
// Seca 3 , Irdeto 4, Conax 5, Cryptoworks 6, Viaccess 7, NDS 8, Nagravision 9
// device:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
//clocks for COM ports in Hz
//for SCI slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz
//Inverse Reset
// 1 -yes
// 0 -no
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled
R: { 3600 }
// R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
//default in code 3600 seconds
H: { 0 0 0 0 0 0 }
// H option -> mapping provid (0-disabled, 1-enabled)
//H: { a b c d e f }
//a-> mapping all 0BXX to 0B00
//b-> mapping 1810 to 1801
//c-> mapping 1803 to 1801
//d-> mapping 1802 to 1801
//e-> mapping 1815 to 1801
//f-> mapping 1822 to 1801
#S: { COM1 }
//S option -> enable sssp protocol
//S: { x }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1Mitschnitt:
Code:
[21:57:39] [newcamd] Control words not received (127.0.0.1:34000), time (22 ms)
[21:57:39] Searching CW cache for CaID 0x1722, pid 0x1766...no CW in cache
[21:57:39] [newcamd] Putting ECM (<-3) from murillo1.blogdns.org, caid:0x1722, ecmpid:0x1766,sidpid:0x000C in ECM buffer (1/10)
[21:57:39] [newcamd] Sending ECM caid:0x1722, ecmpid:0x1766, sidpid:0x000C to (127.0.0.1:34000).
[21:57:39] [newcamd] sent sequence id 209A , received sequence id 209A
[21:57:39] [newcamd] Control words not received (127.0.0.1:34000), time (18 ms)
[21:57:41] Searching CW cache for CaID 0x1722, pid 0x1744...no CW in cache
[21:57:41] [newcamd] Putting ECM (<-2) from murillo1.blogdns.org, caid:0x1722, ecmpid:0x1744,sidpid:0x000B in ECM buffer (1/10)
[21:57:41] [newcamd] Sending ECM caid:0x1722, ecmpid:0x1744, sidpid:0x000B to (127.0.0.1:34000).
[21:57:41] [newcamd] sent sequence id 209B , received sequence id 209B
[21:57:41] [newcamd] Control words not received (127.0.0.1:34000), time (24 ms)
[21:57:41] Searching CW cache for CaID 0x1702, pid 0x170C...no CW in cache
[21:57:41] Dropping ECM (<-4) from donquijote.no-ip.info, caid:0x1702, ecmpid:0x170C, sidpid:0x00DF cant decode localy
[21:57:41] Searching CW cache for CaID 0x1702, pid 0x1C0D...no CW in cache
[21:57:41] Dropping ECM (<-4) from donquijote.no-ip.info, caid:0x1702, ecmpid:0x1C0D, sidpid:0x00DF cant decode localy
[21:57:42] Searching CW cache for CaID 0x1722, pid 0x1744...same ECM allready in cache from murillo1.blogdns.org
[21:57:42] [newcamd] Putting ECM (<-2) from murillo1.blogdns.org, caid:0x1722, ecmpid:0x1744,sidpid:0x000B in ECM buffer (1/10)
[21:57:42] [newcamd] Sending ECM caid:0x1722, ecmpid:0x1744, sidpid:0x000B to (127.0.0.1:34000).
[21:57:42] [newcamd] sent sequence id 209C , received sequence id 209C
[21:57:42] [newcamd] Control words not received (127.0.0.1:34000), time (19 ms)
