Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IPC

AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Bilder von WINSCP fehlen weiterhin, bzw.sind nicht vollständig
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Habe nie WinSCP genutzt. Aber die Putty - Screenshots sind wieder komplett drin.
Keine Ahnung, warum das Forum meine Bilder frisst.
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

So habe jetzt mal mit Reader und Karten gestartet, 2 x easymouse2 mit HD01 und S02

Beim starten blinkt nur der Reader mit HD01 bei S02 nichts.

Funzen tut Garnichts.

Oscam log
-------------------------------------------------------------------------------
>> OSCam << cardserver started at Fri Nov 7 13:14:58 2014
-------------------------------------------------------------------------------
2014/11/07 13:14:58 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9983 (arm-linux-gnueabihf)
2014/11/07 13:14:58 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 3681
2014/11/07 13:14:58 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/11/07 13:14:58 0 s signal handling initialized
2014/11/07 13:14:58 0 s HDplus [mouse] creating thread for device /dev/ttyUSB0
2014/11/07 13:14:58 0 s Sky-S02 [mouse] creating thread for device /dev/ttyUSB0
2014/11/07 13:14:58 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/07 13:14:58 0 s waiting for local card init
2014/11/07 13:14:58 1787958 h webif: decompressed 151425 bytes back into 371104 bytes
2014/11/07 13:14:58 1787958 h HTTP Server running. ip=0.0.0.0 port=16002
2014/11/07 13:14:59 177A108 r Sky-S02 [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=600)
2014/11/07 13:14:59 17782D0 r HDplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/11/07 13:14:59 177A108 r Sky-S02 [mouse] card detected
2014/11/07 13:14:59 17782D0 r HDplus [mouse] card detected
2014/11/07 13:15:01 177A108 r Sky-S02 [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 44 41 50 31 32 65 47 36
2014/11/07 13:15:01 177A108 r Sky-S02 [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/07 13:15:01 177A108 r Sky-S02 [mouse] Setting baudrate to 187500 bps
2014/11/07 13:15:01 177A108 r Sky-S02 [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/11/07 13:15:01 17782D0 r HDplus [mouse] ATR: FF 8D 35 D3 FB B5 91 3D 79
2014/11/07 13:15:01 17782D0 r HDplus [mouse] ERROR: Could not read reader->convention
2014/11/07 13:15:01 17782D0 r HDplus [mouse] Error activating card.
2014/11/07 13:15:01 177A108 r Sky-S02 [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/07 13:15:01 177A108 r Sky-S02 [mouse] Card responded ok for ifsd request of 251
2014/11/07 13:15:02 177A108 r Sky-S02 [mouse] card system not supported
2014/11/07 13:15:02 177A108 r Sky-S02 [mouse] Normal mode failed, reverting to Deprecated Mode
2014/11/07 13:15:02 17782D0 r HDplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 50 88
2014/11/07 13:15:02 17782D0 r HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/07 13:15:02 17782D0 r HDplus [mouse] Setting baudrate to 111600 bps
2014/11/07 13:15:02 17782D0 r HDplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/11/07 13:15:02 17782D0 r HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/07 13:15:02 177A108 r Sky-S02 [mouse] ATR: ED 00
2014/11/07 13:15:02 177A108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 13:15:02 177A108 r Sky-S02 [mouse] Error activating card.
2014/11/07 13:15:13 0 --- Skipped 2 duplicated log lines ---
2014/11/07 13:15:13 177A108 r Sky-S02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/07 13:15:13 177A108 r Sky-S02 [mouse] card initializing error
2014/11/07 13:15:14 17782D0 r HDplus [mouse] Warning: Card returned error on setting ifsd value to 251
2014/11/07 13:15:15 17782D0 r HDplus [mouse] detect native nagra card
2014/11/07 13:15:16 17782D0 r HDplus [mouse] Resync error: readtimeouts 0/0 (max/min) us, writetimeouts 0/0 (max/min) us
2014/11/07 13:15:18 17782D0 r HDplus [mouse] T1 Resync command error, trying to reactivate!
2014/11/07 13:15:19 17782D0 r HDplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/11/07 13:15:19 17782D0 r HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/07 13:15:19 17782D0 r HDplus [mouse] Setting baudrate to 111600 bps
2014/11/07 13:15:19 17782D0 r HDplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/11/07 13:15:19 17782D0 r HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/07 13:15:19 17782D0 r HDplus [mouse] Card responded ok for ifsd request of 251
2014/11/07 13:15:20 17782D0 r HDplus [mouse] ready for requests
2014/11/07 13:15:20 17782D0 r HDplus [mouse] found card system nagra
2014/11/07 13:15:20 17782D0 r HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/07 13:15:20 17782D0 r HDplus [nagra] ROM: D N A S P 1 4 2
2014/11/07 13:15:20 17782D0 r HDplus [nagra] REV: R e v G C P
2014/11/07 13:15:20 17782D0 r HDplus [nagra] SER: ############
2014/11/07 13:15:20 17782D0 r HDplus [nagra] CAID: 1830
2014/11/07 13:15:20 17782D0 r HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/11/07 13:15:20 17782D0 r HDplus [nagra] Prv.ID: 00 00 00 00
2014/11/07 13:15:20 17782D0 r HDplus [nagra] IRD ID: ############
2014/11/07 13:15:20 17782D0 r HDplus [nagra] active to: 2014/12/29 11:59
2014/11/07 13:15:20 17782D0 r HDplus [nagra] -----------------------------------------
2014/11/07 13:15:20 17782D0 r HDplus [nagra] |id |tier |valid from |valid to |
2014/11/07 13:15:20 17782D0 r HDplus [nagra] +----+--------+------------+------------+
2014/11/07 13:15:20 17782D0 r HDplus [nagra] |8011|0064 |2011/01/26 |2012/01/27 |
2014/11/07 13:15:20 17782D0 r HDplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/11/07 13:15:20 17782D0 r HDplus [nagra] |8011|0BEA |2012/01/26 |2015/04/02 |
2014/11/07 13:15:20 17782D0 r HDplus [nagra] -----------------------------------------
2014/11/07 13:15:21 0 s init for all local cards done
2014/11/07 13:15:21 0 s anti cascading disabled
Oscam conf.
# OSCam Konfiguration IPC - oscam.conf
[global]
serverip = 0.0.0.0
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
emmlogdir = /var/log/ipc/
loghistorysize = 4096
[ccam]
port = 12001
version = 2.3.0
[webif]
httpport = 16002
httpuser = oscam

server
# OSCam Konfiguration IPC - oscam.server
[reader]
enable = 1
Label = HDplus
Protocol = mouse
device = /dev/ttyUSB0
cardmhz = 357
Detect = CD
Group = 1
CAID = 1830
rsakey = BF
boxkey = A7
EMMCache = 1,1,2

[reader]
Label = Sky-S02
Protocol = mouse
device = /dev/ttyUSB0
Detect = CD
cardmhz = 600
CAID = 1702,1833
Group = 2
EMMCache = 1,1,2

[reader]
label = camd3emu
enable = 0
protocol = camd35
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 1
[reader]
label = OSEmu
enable = 0
protocol = camd35
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,$
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,$
group = 1
user
# OSCam Konfiguration IPC - oscam.user


[account]
user = dreamuser
pwd = dreampass
au = 1
group = 1,2
betatunnel = 1833.FFFF:1702
[account]
user = dream
pwd = dream
au = 1
group = 1,2
betatunnel = 1833.FFFF:1702

Kann jemand sehen wo die Fehler sind?
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Du hast in der oscam.server bei beiden Readern device = /dev/ttyUSB0device = /dev/ttyUSB0 stehen, das kann ja nicht gehen.
Laut log ist ttyUBS0 die HD+ Karte. Solltest die Reader aber per UDEV fest verlinken.
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Ist mir gerade beim überfliegen vom log auch aufgefallen das bei S02 und HD+ USB0 steht und mal im /etc/udev/rules.d/40-usbadapter.rules nachgeschaut.

Da steht:

SUBSYSTEMS=="usb", KERNEL=="ttyUSB0", ATTRS{serial}==" A400fOdS ", SYMLINK+=" HD01"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB1", ATTRS{serial}==" A900eYfN ", SYMLINK+="Sky-S02"

Oscam Server habe ich verändert probier es nachher aus.
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Dann sprech' die Karten mal mit /dev/HD01 bzw. /dev/Sky-S02 an.
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Die udev-rule ist schon falsch.
Die nummer des USBtty ist mit absicht ein Platzhalter... Also nicht durch 0 und 1 ersetzen.
Diese Adressen sind nicht fix dem Reader zugeordnet.

Gruß
jensebub
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Das kam nachdem ich S02 in usb1 geändert habe.
>> OSCam << cardserver started at Fri Nov 7 16:04:56 2014
-------------------------------------------------------------------------------
2014/11/07 16:04:56 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9983 (arm-linux-gnueabihf)
2014/11/07 16:04:56 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2274
2014/11/07 16:04:56 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/11/07 16:04:56 0 s signal handling initialized
2014/11/07 16:04:56 0 s HDplus [mouse] creating thread for device /dev/ttyUSB0
2014/11/07 16:04:56 0 s Sky-S02 [mouse] creating thread for device /dev/ttyUSB1
2014/11/07 16:04:56 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/07 16:04:56 0 s waiting for local card init
2014/11/07 16:04:56 F8C148 h webif: decompressed 151425 bytes back into 371104 bytes
2014/11/07 16:04:56 F8C148 h HTTP Server running. ip=0.0.0.0 port=16002
2014/11/07 16:04:56 F7F108 r Sky-S02 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=600)
2014/11/07 16:04:57 F7D2D0 r HDplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/11/07 16:04:57 F7F108 r Sky-S02 [mouse] card detected
2014/11/07 16:04:57 F7D2D0 r HDplus [mouse] card detected
2014/11/07 16:04:58 F7F108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 16:04:58 F7F108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 16:04:58 F7F108 r Sky-S02 [mouse] Error activating card.
2014/11/07 16:04:59 F7D2D0 r HDplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/11/07 16:04:59 F7D2D0 r HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/07 16:04:59 F7D2D0 r HDplus [mouse] Setting baudrate to 111600 bps
2014/11/07 16:04:59 F7D2D0 r HDplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/11/07 16:04:59 F7D2D0 r HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/07 16:04:59 F7D2D0 r HDplus [mouse] Card responded ok for ifsd request of 251
2014/11/07 16:05:00 F7D2D0 r HDplus [mouse] detect native nagra card
2014/11/07 16:05:00 F7F108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 16:05:00 F7F108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 16:05:00 F7F108 r Sky-S02 [mouse] Error activating card.
2014/11/07 16:05:00 F7D2D0 r HDplus [mouse] ready for requests
2014/11/07 16:05:00 F7D2D0 r HDplus [mouse] found card system nagra
2014/11/07 16:05:00 F7D2D0 r HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/07 16:05:00 F7D2D0 r HDplus [nagra] ROM: D N A S P 1 4 2
2014/11/07 16:05:00 F7D2D0 r HDplus [nagra] REV: R e v G C 6
2014/11/07 16:05:00 F7D2D0 r HDplus [nagra] SER: ############
2014/11/07 16:05:00 F7D2D0 r HDplus [nagra] CAID: 1830
2014/11/07 16:05:00 F7D2D0 r HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/11/07 16:05:00 F7D2D0 r HDplus [nagra] Prv.ID: 00 00 00 00
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] IRD ID: ############
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] active to: 2014/12/29 11:59
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] -----------------------------------------
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] |id |tier |valid from |valid to |
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] +----+--------+------------+------------+
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] |8011|0064 |2011/01/26 |2012/01/27 |
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] |8011|0BEA |2012/01/26 |2015/04/02 |
2014/11/07 16:05:01 F7D2D0 r HDplus [nagra] -----------------------------------------
2014/11/07 16:05:02 F7F108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 16:05:02 F7F108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 16:05:02 F7F108 r Sky-S02 [mouse] Error activating card.
2014/11/07 16:05:03 F7F108 r Sky-S02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/07 16:05:03 F7F108 r Sky-S02 [mouse] card initializing error
2014/11/07 16:05:03 0 s init for all local cards done
2014/11/07 16:05:03 0 s anti cascading disabled

Ändere jetzt mal dev im sever.
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

@ jensebub

Wie sollte sie den richtig aussehen? Habe sie so übernommen und da stand nur die Seriennummer anpassen.

Habe ich jedenfalls so verstanden.
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Die serial ist ja auch soweit richtig, nur du hast auch noch "ttyUSB*" zu "ttyUSB0" bzw "ttyUSB1" geändert...
Udev kann bei IPC auch per manager gemacht werden, damit es nicht zu solchen Missverständnissen kommt...

Gruß
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Habe jetzt mal udev gelöscht und wieder auf dev/ttyUSB0 und 1 gestellt.
>> OSCam << cardserver started at Fri Nov 7 16:59:19 2014
-------------------------------------------------------------------------------
2014/11/07 16:59:19 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9983 (arm-linux-gnueabihf)
2014/11/07 16:59:19 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2240
2014/11/07 16:59:19 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/11/07 16:59:19 0 s signal handling initialized
2014/11/07 16:59:19 0 s HDplus [mouse] creating thread for device /dev/ttyUSB0
2014/11/07 16:59:19 0 s Sky-S02 [mouse] creating thread for device /dev/ttyUSB1
2014/11/07 16:59:19 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/07 16:59:19 0 s waiting for local card init
2014/11/07 16:59:19 EBE2D0 h webif: decompressed 151425 bytes back into 371104 bytes
2014/11/07 16:59:20 EBE2D0 h HTTP Server running. ip=0.0.0.0 port=16002
2014/11/07 16:59:20 ECEF80 r Sky-S02 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=600)
2014/11/07 16:59:20 ECD148 r HDplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/11/07 16:59:20 ECEF80 r Sky-S02 [mouse] card detected
2014/11/07 16:59:20 ECD148 r HDplus [mouse] card detected
2014/11/07 16:59:22 ECEF80 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 16:59:22 ECEF80 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 16:59:22 ECEF80 r Sky-S02 [mouse] Error activating card.
2014/11/07 16:59:22 ECD148 r HDplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/11/07 16:59:22 ECD148 r HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/07 16:59:22 ECD148 r HDplus [mouse] Setting baudrate to 111600 bps
2014/11/07 16:59:22 ECD148 r HDplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/11/07 16:59:22 ECD148 r HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/07 16:59:22 ECD148 r HDplus [mouse] Card responded ok for ifsd request of 251
2014/11/07 16:59:23 ECD148 r HDplus [mouse] detect native nagra card
2014/11/07 16:59:24 ECEF80 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 16:59:24 ECEF80 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 16:59:24 ECEF80 r Sky-S02 [mouse] Error activating card.
2014/11/07 16:59:24 ECD148 r HDplus [mouse] ready for requests
2014/11/07 16:59:24 ECD148 r HDplus [mouse] found card system nagra
2014/11/07 16:59:24 ECD148 r HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/07 16:59:24 ECD148 r HDplus [nagra] ROM: D N A S P 1 4 2
2014/11/07 16:59:24 ECD148 r HDplus [nagra] REV: R e v G C 6
2014/11/07 16:59:24 ECD148 r HDplus [nagra] SER: ############
2014/11/07 16:59:24 ECD148 r HDplus [nagra] CAID: 1830
2014/11/07 16:59:24 ECD148 r HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/11/07 16:59:24 ECD148 r HDplus [nagra] Prv.ID: 00 00 00 00
2014/11/07 16:59:24 ECD148 r HDplus [nagra] IRD ID: ############
2014/11/07 16:59:24 ECD148 r HDplus [nagra] active to: 2014/12/29 11:59
2014/11/07 16:59:24 ECD148 r HDplus [nagra] -----------------------------------------
2014/11/07 16:59:24 ECD148 r HDplus [nagra] |id |tier |valid from |valid to |
2014/11/07 16:59:24 ECD148 r HDplus [nagra] +----+--------+------------+------------+
2014/11/07 16:59:24 ECD148 r HDplus [nagra] |8011|0064 |2011/01/26 |2012/01/27 |
2014/11/07 16:59:24 ECD148 r HDplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/11/07 16:59:24 ECD148 r HDplus [nagra] |8011|0BEA |2012/01/26 |2015/04/02 |
2014/11/07 16:59:24 ECD148 r HDplus [nagra] -----------------------------------------
2014/11/07 16:59:26 ECEF80 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 16:59:26 ECEF80 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 16:59:26 ECEF80 r Sky-S02 [mouse] Error activating card.
2014/11/07 16:59:26 ECEF80 r Sky-S02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/07 16:59:26 ECEF80 r Sky-S02 [mouse] card initializing error
2014/11/07 16:59:27 0 s init for all local cards done
2014/11/07 16:59:27 0 s anti cascading disabled

- - - - - - - - - -

"ttyUSB0" bzw "ttyUSB1" stand schon so, also die 2 Zeilen mit nur ttyUSB ist korrekt?
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Warum nutzt du denn jetzt schon wieder kein udev?
Du wirst mit zwei Readern und der Zuordnung per ttyUSB0 oder ttyUSB1 immer wieder Probleme bekommen, diese Adressen sind nicht dem einzelnen Reader fest zugeordnet, daher gibt es sowas wie udev...

/EDIT: Ich weiß ja nicht, wie du an deine Datei gekommen bist, aber sie sollte erstmal eine Zahl größer 90 voran haben, also z.B. "91-usb.rules" und sollte folgenden ähnlichen Inhalt haben:
Code: 
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A21112WH", SYMLINK+="ReaderName"
Dann sollte der device in OScam wie folgt aussehen:
Code: 
device = /dev/ReaderName
Groß-/Kleinschreibung unbedingt beachten!

Gruß
jensebub
 
Zuletzt bearbeitet:
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

So, habe jetzt diese udev
SUBSYSTEMS=="usb", KERNEL=="ttyUSB", ATTRS{serial}==" A400fOdS ", SYMLINK+="HD01"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB", ATTRS{serial}==" A900eYfN ", SYMLINK+="Sky-S02"

Beim starten kam das
>> OSCam << cardserver started at Fri Nov 7 17:20:57 2014
-------------------------------------------------------------------------------
2014/11/07 17:20:57 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9983 (arm-linux-gnueabihf)
2014/11/07 17:20:57 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2240
2014/11/07 17:20:57 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/11/07 17:20:57 0 s signal handling initialized
2014/11/07 17:20:57 0 s HDplus [mouse] creating thread for device /dev/ttyUSB0
2014/11/07 17:20:57 0 s Sky-S02 [mouse] creating thread for device /dev/ttyUSB1
2014/11/07 17:20:57 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/07 17:20:57 0 s waiting for local card init
2014/11/07 17:20:57 13C0148 h webif: decompressed 151425 bytes back into 371104 bytes
2014/11/07 17:20:57 13C0148 h HTTP Server running. ip=0.0.0.0 port=16002
2014/11/07 17:20:57 13B3108 r Sky-S02 [mouse] Reader initialized (device=/dev/ttyUSB1, detect=cd, mhz=357, cardmhz=600)
2014/11/07 17:20:58 13B12D0 r HDplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2014/11/07 17:20:58 13B3108 r Sky-S02 [mouse] card detected
2014/11/07 17:20:58 13B12D0 r HDplus [mouse] card detected
2014/11/07 17:21:00 13B3108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 17:21:00 13B3108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 17:21:00 13B3108 r Sky-S02 [mouse] Error activating card.
2014/11/07 17:21:00 13B12D0 r HDplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/11/07 17:21:00 13B12D0 r HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/07 17:21:00 13B12D0 r HDplus [mouse] Setting baudrate to 111600 bps
2014/11/07 17:21:00 13B12D0 r HDplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/11/07 17:21:00 13B12D0 r HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/07 17:21:00 13B12D0 r HDplus [mouse] Card responded ok for ifsd request of 251
2014/11/07 17:21:01 13B12D0 r HDplus [mouse] detect native nagra card
2014/11/07 17:21:01 13B3108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 17:21:01 13B3108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 17:21:01 13B3108 r Sky-S02 [mouse] Error activating card.
2014/11/07 17:21:02 13B12D0 r HDplus [mouse] ready for requests
2014/11/07 17:21:02 13B12D0 r HDplus [mouse] found card system nagra
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] ROM: D N A S P 1 4 2
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] REV: R e v G C 6
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] SER: ############
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] CAID: 1830
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] Prv.ID: 00 00 00 00
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] IRD ID: ############
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] active to: 2014/12/29 11:59
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] -----------------------------------------
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] |id |tier |valid from |valid to |
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] +----+--------+------------+------------+
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] |8011|0064 |2011/01/26 |2012/01/27 |
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] |8011|0BEA |2012/01/26 |2015/04/02 |
2014/11/07 17:21:02 13B12D0 r HDplus [nagra] -----------------------------------------
2014/11/07 17:21:03 13B3108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 17:21:03 13B3108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 17:21:03 13B3108 r Sky-S02 [mouse] Error activating card.
2014/11/07 17:21:04 13B3108 r Sky-S02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/07 17:21:04 13B3108 r Sky-S02 [mouse] card initializing error
2014/11/07 17:21:05 0 s init for all local cards done
2014/11/07 17:21:05 0 s anti cascading disabled

Oscam
conf
# OSCam Konfiguration IPC - oscam.conf
[global]
serverip = 0.0.0.0
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
emmlogdir = /var/log/ipc/
loghistorysize = 4096
[ccam]
port = 12001
version = 2.3.0
[webif]
httpport = 16002
httpuser = oscam
Server
# OSCam Konfiguration IPC - oscam.server
[reader]
enable = 1
Label = HDplus
Protocol = mouse
device = /dev/ttyUSB0
cardmhz = 357
Detect = CD
Group = 1
CAID = 1830
rsakey = BF
boxkey = A7
EMMCache = 1,1,2

[reader]
Label = Sky-S02
Protocol = mouse
device = /dev/ttyUSB1
Detect = CD
cardmhz = 600
CAID = 1702,1833
Group = 2
EMMCache = 1,1,2

[reader]
label = camd3emu
enable = 0
protocol = camd35
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 1
[reader]
label = OSEmu
enable = 0
protocol = camd35
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D 05:9C;090F:62,73,84,94,$
ident = 0D00:000000,000004,000010,000014,000020,0000C0,000 0C4,0000CC;0D02:00008C,$
group = 1
user
# OSCam Konfiguration IPC - oscam.user


[account]
user = dreamuser
pwd = dreampass
au = 1
group = 1,2
betatunnel = 1833.FFFF:1702
[account]
user = dream
pwd = dream
au = 1
group = 1,2
betatunnel = 1833.FFFF:1702
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

Gucke dir bitte meine udev-Beispielzeile, oder meinen ersten Hinweis drüber an, deine udev-rule ist immernoch falsch!
Code: 
SUBSYSTEMS=="usb", KERNEL=="ttyUSB[COLOR=#ff0000]*[/COLOR]", ATTRS{serial}==" A400fOdS ", SYMLINK+="HD01"
Bitte ein wenig genauer hinschauen!
Und der Reader hat dann auch noch nicht den richtigen device,... mit
device = /dev/ttyUSB0 ist udev für den Reader unwirksam!
 
AW: Laberthread zu Grundsätzliches Einrichten eines Raspberry Pi als CS-Server mit IP

So jetzt neu, udev
unter sudo nano /etc/udev/rules.d/91-usb.rules

SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A400fOdS", SYMLINK+="HD01"
SUBSYSTEMS=="usb", KERNEL=="ttyUSB*", ATTRS{serial}=="A900eYfN", SYMLINK+="Sky-S02"

log
>> OSCam << cardserver started at Fri Nov 7 18:23:02 2014
-------------------------------------------------------------------------------
2014/11/07 18:23:02 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build r9983 (arm-linux-gnueabihf)
2014/11/07 18:23:02 0 s creating pidfile /tmp/.oscam/oscam.pid with pid 2219
2014/11/07 18:23:02 0 s userdb reloaded: 2 accounts loaded, 0 expired, 0 disabled
2014/11/07 18:23:02 0 s signal handling initialized
2014/11/07 18:23:02 0 s HDplus [mouse] creating thread for device /dev/HD01
2014/11/07 18:23:02 0 s Sky-S02 [mouse] creating thread for device /dev/Sky-S02
2014/11/07 18:23:03 0 s loadbalancer: can't read from file /tmp/.oscam/stat
2014/11/07 18:23:03 0 s waiting for local card init
2014/11/07 18:23:03 1422148 h webif: decompressed 151425 bytes back into 371104 bytes
2014/11/07 18:23:03 1422148 h HTTP Server running. ip=0.0.0.0 port=16002
2014/11/07 18:23:03 1415108 r Sky-S02 [mouse] Reader initialized (device=/dev/Sky-S02, detect=cd, mhz=357, cardmhz=600)
2014/11/07 18:23:03 14132D0 r HDplus [mouse] Reader initialized (device=/dev/HD01, detect=cd, mhz=357, cardmhz=357)
2014/11/07 18:23:04 1415108 r Sky-S02 [mouse] card detected
2014/11/07 18:23:04 14132D0 r HDplus [mouse] card detected
2014/11/07 18:23:05 1415108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 18:23:05 1415108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 18:23:05 1415108 r Sky-S02 [mouse] Error activating card.
2014/11/07 18:23:05 14132D0 r HDplus [mouse] ATR: 3F FF 95 00 FF 91 81 71 FE 47 00 44 4E 41 53 50 31 34 32 20 52 65 76 47 43 36 61
2014/11/07 18:23:05 14132D0 r HDplus [mouse] Init card protocol T1, FI=9, F=512, D=16, N=255
2014/11/07 18:23:05 14132D0 r HDplus [mouse] Setting baudrate to 111600 bps
2014/11/07 18:23:05 14132D0 r HDplus [mouse] Calculated work ETU is 8.96 us reader mhz = 357
2014/11/07 18:23:05 14132D0 r HDplus [mouse] ATR Fsmax is 5 MHz, clocking card to wanted user cardspeed off 3.57 MHz (specified in reader->mhz)
2014/11/07 18:23:05 14132D0 r HDplus [mouse] Card responded ok for ifsd request of 251
2014/11/07 18:23:57 14132D0 r HDplus [mouse] detect native nagra card
2014/11/07 18:23:57 1415108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 18:23:57 1415108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 18:23:57 1415108 r Sky-S02 [mouse] Error activating card.
2014/11/07 18:23:57 14132D0 r HDplus [mouse] ready for requests
2014/11/07 18:23:57 14132D0 r HDplus [mouse] found card system nagra
2014/11/07 18:23:57 14132D0 r HDplus [nagra] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max alloted of 1
2014/11/07 18:23:57 14132D0 r HDplus [nagra] ROM: D N A S P 1 4 2
2014/11/07 18:23:57 14132D0 r HDplus [nagra] REV: R e v G C 6
2014/11/07 18:23:57 14132D0 r HDplus [nagra] SER: ############
2014/11/07 18:23:57 14132D0 r HDplus [nagra] CAID: 1830
2014/11/07 18:23:57 14132D0 r HDplus [nagra] Prv.ID: 00 00 34 11 (sysid)
2014/11/07 18:23:57 14132D0 r HDplus [nagra] Prv.ID: 00 00 00 00
2014/11/07 18:23:57 14132D0 r HDplus [nagra] IRD ID: ############
2014/11/07 18:23:57 14132D0 r HDplus [nagra] active to: 2014/12/29 11:59
2014/11/07 18:23:57 14132D0 r HDplus [nagra] -----------------------------------------
2014/11/07 18:23:57 14132D0 r HDplus [nagra] |id |tier |valid from |valid to |
2014/11/07 18:23:57 14132D0 r HDplus [nagra] +----+--------+------------+------------+
2014/11/07 18:23:57 14132D0 r HDplus [nagra] |8011|0064 |2011/01/26 |2012/01/27 |
2014/11/07 18:23:58 14132D0 r HDplus [nagra] |8011|0065 |1992/01/01 |1993/01/01 |
2014/11/07 18:23:58 14132D0 r HDplus [nagra] |8011|0BEA |2012/01/26 |2015/04/02 |
2014/11/07 18:23:58 14132D0 r HDplus [nagra] -----------------------------------------
2014/11/07 18:23:59 1415108 r Sky-S02 [mouse] ATR: F7 F7 F0 F3 7A 86 78 B6 F0 1F FD 2E FC F0 FF
2014/11/07 18:23:59 1415108 r Sky-S02 [mouse] ERROR: Could not read reader->convention
2014/11/07 18:23:59 1415108 r Sky-S02 [mouse] Error activating card.
2014/11/07 18:24:00 1415108 r Sky-S02 [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2014/11/07 18:24:00 1415108 r Sky-S02 [mouse] card initializing error
2014/11/07 18:24:00 0 s init for all local cards done
2014/11/07 18:24:00 0 s anti cascading disabled

Oscam
conf
# OSCam Konfiguration IPC - oscam.conf
[global]
serverip = 0.0.0.0
disablelog = 0
logfile = /var/log/ipc/OScam.log
maxlogsize = 2480
cachedelay = 0
saveinithistory = 1
emmlogdir = /var/log/ipc/
loghistorysize = 4096
[ccam]
port = 12001
version = 2.3.0
[webif]
httpport = 16002
httpuser = oscam
httppwd = oscam
httprefresh = 15
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255
httpreadonly = 0
httpsavefullcfg = 1
Server
# OSCam Konfiguration IPC - oscam.server
[reader]
enable = 1
Label = HDplus
Protocol = mouse
device = /dev/HD01
cardmhz = 357
Detect = CD
Group = 1
CAID = 1830
rsakey = BF
boxkey = A7
EMMCache = 1,1,2

[reader]
Label = Sky-S02
Protocol = mouse
device = /dev/Sky-S02
Detect = CD
cardmhz = 600
CAID = 1702,1833
Group = 2
EMMCache = 1,1,2

[reader]
label = camd3emu
enable = 0
protocol = camd35
device = 127.0.0.1,20248
user = meinserver
password = meinserverpass
group = 1
[reader]
label = OSEmu
enable = 0
protocol = camd35
device = 127.0.0.1,54321
user = emu
password = emu
caid = 0D00,0D02,0D03,0D05,090F
ecmwhitelist = 0D00:9C,84,87,8B,BF,C3,6D;0D02:84;0D03:9C,9F,A5;0D05:9C;090F:62,73,84,94,95,96,99,A6,B7
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000CC;0D02:00008C,0000A0,0000A4,0000A8;0D03:000004,000008,000024,000028;0D05:000004,000010;090F:000000
group = 1
user
# OSCam Konfiguration IPC - oscam.user


[account]
user = dreamuser
pwd = dreampass
au = 1
group = 1,2
betatunnel = 1833.FFFF:1702
[account]
user = dream
pwd = dream
au = 1
group = 1,2
betatunnel = 1833.FFFF:1702
 
Du musst dich einloggen oder registrieren, um hier zu antworten.

Ähnliche Themen

gelöst Raspberry CS Server einrichten
2 3
Antworten
32
Aufrufe
2K
Token
T
PI30 / PI18 Wechselrichter auf Raspberry Pi: Auto-Setup mit Web-UI und systemd
Antworten
0
Aufrufe
146
sralus
S
gelöst Raspberry PI Neuinstallation IPC
Antworten
5
Aufrufe
721
Vigor
gelöst HD04A Karte in Raspberry Pi 5 Server – via easymouse - OScam meldet "rejected group" trotz EMM-Zugriff
Antworten
12
Aufrufe
287
Makandal
R
gelöst Seit neustem keinen Zugriff mehr auf Raspi
Antworten
13
Aufrufe
752
Derek Buegel
Menü
Anmelden
Registrieren
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…