Dies ist eine mobil optimierte Seite, die schnell lädt. Wenn Sie die Seite ohne Optimierung laden möchten, dann klicken Sie auf diesen Text.

Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM800)

    Nobody is reading this thread right now.
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

Dm800se auch zu langsam? Ok.
Was bringt mir die swap datei?
Wo lege ich sie an? Hab keine erfahrung.


Gesendet von iPhone mit Tapatalk
 
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

Erweitert den Arbeitsspeicher der Box.

"enigma2-plugin-extensions-swapmanager" installieren und eine Swap Datei einrichten

DM800SE hat mehr Prozessor Leistung als die DM800.
 
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

ist es notwendig vorher zu flashen?
oder kann ich auch so flashexpander installen?
 
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

am besten ist immer frisches Image,flash erweitern und dann Plugins installieren.

UND,wenn du 1x irgendwo fragst reicht es,dann mach bitte keinen extra Trheat auf,dann poste bitte da wo es hin gehört,kein Mensch weiss bisher welche Box mit welchem Image du hast
 
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

Hi,

sobald ich die Box neustarte, startet sie automatisch 3 - 4 mal neu, ist das normal?
Flashexpander.py habe ich ersetzt (gleiches Resultat auch nach dem Auslagern der usr)

Und mit eparted ist es nicht möglich Partitionen zu erstellen, es kommt eine Fehlermeldung das der keine Partition erstellen kann.
Mit normaler Initialiserung funktioniert es jedoch.
 
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

Eparted fkt. scheinbar auf aktuellen Images nicht mehr auf der DM800.

Nein, dies ist nicht normal, das sie dreimal neustartet.
evtl. hilft ein neues Netzteil oder aktiver USB HUB?
 
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

Also er startet schon, jedoch kommt die Anzeige mit dem dhcp ca. 3 mal dann kommt erst das Bootfenster.
Oder einfach mal das Image neu aufspielen? Davor war noch glaube ich die Newnigma2 .12 oder .14 drauf
 
AW: Laberthread:Anleitung Flashexpander + Flash entlasten OE2.0 (Flasherweiterung DM8

Genau die Version habe ich drauf gemacht
Okay probiere das dann nochmal aus
Nur zu deiner Info, mit dieser Image scheint eparted nicht mehr zu funktionieren

Habe dafür das Programm MiniTool Partition Wizard Free einfach genutzt (Unter Windows)
und einfach so zwei Partitionen ext3 erstellt.
 
Die Links in der Anleitung gehen nicht mehr, ich finde die flashexpander.py nirgends zum downloaden, gibts die irgendwo anders ?
 
Hallo,
ich habe folg. Problem, eine 1000 MB Partition auf dem USB Stick mit Partitions Wizard in EXT3 erstelltt. Der Stick wird erkannt. Wenn ich aber bei Mounts schaue, ist der nicht gemountet, versuche ich ihn zu mounten kommt die Fehlermeldung Mount fehlgeschlagen.
Trotzdem kann ich den Stick bei Flashexpander auswählen, doch dann beim kopieren crashed die Box.
Bevor ich die Box neu geflasht habe lief Flashexpander mit openatv 5.1 tadellos.
Nur weil Mediaportal die drei Abhägigkeiten braucht möchte ich auf 5.3 umsteigen.

DM 800HDse clone Openatv 5.3
<?xml version="1.0" encoding="utf-8"?>
<openATV>
<enigma2>
<crashdate>Di Okt 4 20:03:51 2016</crashdate>
<compiledate>Jul 19 2016</compiledate>
<contactemail>forum at
<!-- Please email this crashlog to above address -->
<skin>MetrixHD/skin.xml</skin>
<sourcedate>2016-07-19</sourcedate>
<version>3.0.0</version>
</enigma2>
<image>
<stbmodel>ultimo</stbmodel>
<kernelversion>
<![CDATA[
Linux dm800se 3.2-dm800se #1 SMP Sat Mar 26 21:49:29 CET 2016 mips GNU/Linux
]]>
</kernelversion>
<kernelcmdline>root=/dev/mtdblock3 rootfstype=jffs2 rw console=ttyS0,115200n8 bmem=116M@140M</kernelcmdline>
<nimsockets>NIM Socket 0:</nimsockets>
<imageversion>
<![CDATA[
box_type=dm800se
build_type=0
version=5.3
build=0
date=20160706134604
comment=openATV
target=9
creator=openATV
url=
catalog=
]]>
</imageversion>
<imageissue>
<![CDATA[
Welcome to openATV for %h
openatv 5.3 %h

]]>
</imageissue>
</image>
<crashlogs>
<enigma2crashlog>
<![CDATA[
0:03:31.987 < > dvb/frontend.cpp:1541 tuneLoopInt [SEC] tuner 0 sendDiseqc: e00003(DiSEqC peripherial power on)
20:03:31.988 < > dvb/frontend.cpp:1552 tuneLoopInt [SEC] diseqc ioctl duration: 48 ms -> extra guard delay 4 ms
20:03:31.990 { } Components/Network.py:125 routeFinished 0.0.0.0
20:03:31.991 { } Components/Network.py:125 routeFinished 192.168
20:03:32.048 { E } plugin/controllers/SR.py:24 __init__ SerienRecorder plugin not found
20:03:32.050 { E } plugin/controllers/ER.py:23 __init__ ER plugin not found
20:03:32.059 { } plugin/httpserver.py:118 buildRootTree [OpenWebif] no plugins to load
20:03:32.091 { } plugin/httpserver.py:140 HttpdStart [OpenWebif] started on 80
20:03:32.092 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 42(16)
20:03:32.094 [ ] dvb/frontend.cpp:1484 tuneLoopInt [SEC] tuner 0 sleep 150ms
20:03:32.104 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 47(16)
20:03:32.303 < > dvb/frontend.cpp:1541 tuneLoopInt [SEC] tuner 0 sendDiseqc: e01038f2
20:03:32.304 < > dvb/frontend.cpp:1552 tuneLoopInt [SEC] diseqc ioctl duration: 59 ms -> extra guard delay 7 ms
20:03:32.311 [ ] dvb/frontend.cpp:1484 tuneLoopInt [SEC] tuner 0 sleep 100ms
20:03:32.411 [ ] dvb/frontend.cpp:1783 tuneLoopInt [SEC] update current switch params
20:03:32.412 [ ] dvb/frontend.cpp:1595 tuneLoopInt [SEC] tuner 0 startTuneTimeout 5000
20:03:32.414 [ ] dvb/frontend.cpp:1588 tuneLoopInt [SEC] tuner 0 setFrontend: events enabled
20:03:32.414 [ ] dvb/frontend.cpp:1995 setFrontend setting frontend 0 events: on
20:03:32.429 [ ] dvb/frontend.cpp:765 feEvent (0)fe event: status 0, inversion off, m_tuning 1
20:03:32.429 [ ] dvb/frontend.cpp:1484 tuneLoopInt [SEC] tuner 0 sleep 500ms
20:03:32.454 [ ] dvb/frontend.cpp:765 feEvent (0)fe event: status 1, inversion off, m_tuning 2
20:03:32.889 [ ] dvb/frontend.cpp:765 feEvent (0)fe event: status 0, inversion off, m_tuning 3
20:03:32.930 [ ] dvb/frontend.cpp:1824 tuneLoopInt [SEC] set dynamic current limiting
20:03:33.048 [ ] dvb/frontend.cpp:765 feEvent (0)fe event: status 1f, inversion off, m_tuning 4
20:03:33.049 [ ] dvb/dvb.cpp:1657 frontendStateChanged OURSTATE: tuner 0 ok
20:03:33.049 [ ] dvb/dvbtime.cpp:588 DVBChannelStateChanged [eDVBLocalTimerHandler] channel 0x150f570 running
20:03:33.050 [ ] dvb/epgcache.cpp:644 DVBChannelStateChanged [eEPGCache] channel 0x150f570 running
20:03:33.051 [ ] dvb/dvb.cpp:1272 DVBChannelStateChanged stop release channel timer
20:03:33.051 [ ] dvb/epgcache.cpp:1854 startChannel [EPGC] next update in 2 sec
20:03:33.051 [ ] dvb/pmt.cpp:67 channelStateChanged ok ... now we start!!
20:03:33.051 [ ] service/servicedvb.cpp:1218 serviceEvent eventNewProgramInfo 0 0
20:03:33.052 < > service/servicedvb.cpp:2787 updateDecoder have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
20:03:33.052 [ ] dvb/dvb.cpp:1022 allocateDemux allocate demux
20:03:33.068 [ ] service/servicedvb.cpp:3470 setAC3Delay Setting audio delay: setAC3Delay, 0 + 0
20:03:33.070 [ ] service/servicedvb.cpp:3481 setPCMDelay Setting audio delay: setPCMDelay, 0 + 0
20:03:33.071 [ ] dvb/decoder.cpp:824 setState decoder state: play, vpid=511, apid=515
20:03:33.071 < > dvb/decoder.cpp:697 startPid DMX_SET_PES_FILTER(0x1ff) - pcr - ok
20:03:33.071 < > dvb/decoder.cpp:705 startPid DEMUX_START - pcr - ok
20:03:33.074 < > dvb/decoder.cpp:83 startPid DMX_SET_PES_FILTER(0x203) - audio - ok
20:03:33.074 < > dvb/decoder.cpp:91 startPid DEMUX_START - audio - ok
20:03:33.074 < > dvb/decoder.cpp:137 startPid AUDIO_SET_BYPASS(0) - ok
20:03:33.085 < > dvb/decoder.cpp:190 freeze AUDIO_PAUSE - ok
20:03:33.085 < > dvb/decoder.cpp:145 startPid AUDIO_PLAY - ok
20:03:33.090 [ ] dvb/decoder.cpp:266 eDVBVideo Video Device: /dev/dvb/adapter0/video0
20:03:33.090 [ ] dvb/decoder.cpp:273 eDVBVideo demux device: /dev/dvb/adapter0/demux0
20:03:33.092 < > dvb/decoder.cpp:349 startPid VIDEO_SET_STREAMTYPE 1 - ok
20:03:33.095 < > dvb/decoder.cpp:384 startPid DMX_SET_PES_FILTER(0x1ff) - video - ok
20:03:33.095 < > dvb/decoder.cpp:392 startPid DEMUX_START - video - ok
20:03:33.097 < > dvb/decoder.cpp:453 freeze VIDEO_FREEZE - ok
20:03:33.097 < > dvb/decoder.cpp:407 startPid VIDEO_PLAY - ok
20:03:33.101 < > dvb/decoder.cpp:774 startPid DMX_SET_PES_FILTER(0x21) - ttx - ok
20:03:33.101 < > dvb/decoder.cpp:782 startPid DEMUX_START - ttx - ok
20:03:33.111 < > dvb/decoder.cpp:477 setSlowMotion VIDEO_SLOWMOTION(0) - ok
20:03:33.111 < > dvb/decoder.cpp:492 setFastForward VIDEO_FAST_FORWARD(0) - ok
20:03:33.111 < > dvb/decoder.cpp:465 unfreeze VIDEO_CONTINUE - ok
20:03:33.112 < > dvb/decoder.cpp:202 unfreeze AUDIO_CONTINUE - ok
20:03:33.112 < > dvb/decoder.cpp:221 setChannel AUDIO_CHANNEL_SELECT(0) - ok
20:03:33.126 [ ] dvb/teletext.cpp:640 setPageAndMagazine disable teletext subtitles page ffffffffffffffff (und)
20:03:33.138 { E } Components/Pixmap.py:133 setPixmapNum setPixmapNum(0) failed! defined pixmaps: []
20:03:33.189 { } Plugins/Extensions/Volume_adjust/plugin.py:468 __evUpdatedInfo [Volume Adjust] Update Info
20:03:33.189 { } Plugins/Extensions/Volume_adjust/plugin.py:472 __evUpdatedInfo [Volume Adjust] Volume = 50
20:03:33.190 { } Plugins/Extensions/Volume_adjust/plugin.py:446 loadXML [Volume Adjust] load xml...
20:03:33.192 { } Plugins/Extensions/Volume_adjust/plugin.py:483 __evUpdatedInfo [Volume Adjust] New Channel
20:03:33.193 { } Plugins/Extensions/Volume_adjust/plugin.py:488 __evUpdatedInfo [Volume Adjust] oldvol = 0
20:03:33.214 [ ] dvb/cahandler.cpp:263 registerService [eDVBCAService] new service 1:0:19:EF75:3F9:1:C00000:0:0:0:
20:03:33.215 [ ] dvb/cahandler.cpp:281 registerService [eDVBCAService] add demux 0 to slot 0 service 1:0:19:EF75:3F9:1:C00000:0:0:0:
20:03:33.363 { E } Tools/Notifications.py:36 RemovePopup RemovePopup, id = ZapError
20:03:33.369 < > dvb/decoder.cpp:535 video_event VIDEO_GET_EVENT - ok
20:03:33.406 < > dvb/decoder.cpp:535 video_event VIDEO_GET_EVENT - ok
20:03:33.409 [ ] dvb/pmt.cpp:187 PATready PATready
20:03:33.409 [ ] dvb/pmt.cpp:198 PATready PAT TSID: 0x03f9 (1017)
20:03:33.409 [ ] dvb/pmt.cpp:227 PATready use pmtpid 0061 for service_id ef75
20:03:33.466 [ ] service/servicedvb.cpp:1218 serviceEvent eventNewProgramInfo 0 0
20:03:33.473 < > service/servicedvb.cpp:2787 updateDecoder have 1 video stream(s) (01ff), and 1 audio stream(s) (0203), and the pcr pid is 01ff, and the text pid is 0021
20:03:33.474 [ ] service/servicedvb.cpp:3470 setAC3Delay Setting audio delay: setAC3Delay, 0 + 0
20:03:33.475 [ ] service/servicedvb.cpp:3481 setPCMDelay Setting audio delay: setPCMDelay, 0 + 0
20:03:33.475 [ ] dvb/decoder.cpp:824 setState decoder state: play, vpid=511, apid=515
20:03:33.511 { } Plugins/Extensions/Volume_adjust/plugin.py:468 __evUpdatedInfo [Volume Adjust] Update Info
20:03:33.512 { } Plugins/Extensions/Volume_adjust/plugin.py:472 __evUpdatedInfo [Volume Adjust] Volume = 50
20:03:33.512 { } Plugins/Extensions/Volume_adjust/plugin.py:446 loadXML [Volume Adjust] load xml...
20:03:33.529 [ ] dvb_ci/dvbci.cpp:862 gotPMT [eDVBCIInterfaces] gotPMT
20:03:33.817 { } Components/AVSwitch.py:294 setAspect [VideoMode] setting aspect: 16:9
20:03:33.822 { } Components/AVSwitch.py:305 setWss [VideoMode] setting wss: auto
20:03:33.825 { } Components/AVSwitch.py:311 setPolicy43 [VideoMode] setting policy: panscan
20:03:33.830 { } Components/AVSwitch.py:318 setPolicy169 [VideoMode] setting policy2: letterbox
20:03:34.345 [ ] dvb/pmt.cpp:737 SDTScanEvent sdt update done!
20:03:34.493 [ ] dvb/pmt.cpp:237 AITready AITready
20:03:35.060 [ ] dvb/epgcache.cpp:1558 startEPG [EPGC] start caching events
20:03:35.154 < > dvb/decoder.cpp:535 video_event VIDEO_GET_EVENT - ok
20:03:35.426 [ ] dvb/pmt.cpp:323 OCready OCready
20:03:35.591 { } Components/AVSwitch.py:294 setAspect [VideoMode] setting aspect: 16:9
20:03:35.596 { } Components/AVSwitch.py:305 setWss [VideoMode] setting wss: auto
20:03:35.599 { } Components/AVSwitch.py:311 setPolicy43 [VideoMode] setting policy: panscan
20:03:35.603 { } Components/AVSwitch.py:318 setPolicy169 [VideoMode] setting policy2: letterbox
20:03:35.667 [ ] dvb/dvbtime.cpp:416 updateTime [eDVBLocalTimerHandler] Transponder time is 04.10.2016 20:03:34
20:03:35.667 [ ] dvb/dvbtime.cpp:429 updateTime [eDVBLocalTimerHandler] diff is -1
20:03:35.667 [ ] dvb/dvbtime.cpp:432 updateTime [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
20:03:35.667 [ ] dvb/dvbtime.cpp:49 setRTC [eDVBLocalTimerHandler] set RTC Time
20:03:35.670 [ ] dvb/dvbtime.cpp:502 updateTime [eDVBLocalTimerHandler] update RTC
20:03:35.671 [ ] dvb/dvbtime.cpp:522 updateTime [eDVBLocalTimerHandler] time update to 20:03:34
20:03:35.671 [ ] dvb/dvbtime.cpp:525 updateTime [eDVBLocalTimerHandler] m_time_difference is -1
20:03:35.671 [ ] dvb/dvbtime.cpp:529 updateTime [eDVBLocalTimerHandler] set Linux Time
20:03:34.671 [ ] dvb/dvbtime.cpp:540 updateTime [eDVBLocalTimerHandler] time after update is 20:03:34
20:03:35.153 < > dvb/decoder.cpp:535 video_event VIDEO_GET_EVENT - ok
20:03:35.565 { } Components/AVSwitch.py:294 setAspect [VideoMode] setting aspect: 16:9
20:03:35.569 { } Components/AVSwitch.py:305 setWss [VideoMode] setting wss: auto
20:03:35.573 { } Components/AVSwitch.py:311 setPolicy43 [VideoMode] setting policy: panscan
20:03:35.578 { } Components/AVSwitch.py:318 setPolicy169 [VideoMode] setting policy2: letterbox
20:03:40.331 { } Plugins/Extensions/Infopanel/CamStart.py:93 timerEvent [CAMSTARTER] Start/Check: 2
20:03:40.865 { } Plugins/Extensions/Infopanel/CamStart.py:137 timerEvent 2016-10-04 20:03:40.863802
20:03:40.865 { } Plugins/Extensions/Infopanel/CamStart.py:138 timerEvent [CAMSTARTER] CAM 1 is Running, active cam 1: CCcam 2.0.9
20:03:40.867 { } Plugins/Extensions/Infopanel/CamStart.py:187 timerEvent [CAMSTARTER] Cam is running, exit camstarter
20:03:40.868 [ ] driver/rcinput.cpp:23 handleCode 1 18f 1
20:03:40.876 { } Screens/InfoBarGenerics.py:204 actionA KEY: 399 0 KEY_GREEN GREEN
20:03:40.878 [ ] driver/rcinput.cpp:23 handleCode 0 18f 1
20:03:40.883 { } Screens/InfoBarGenerics.py:204 actionA KEY: 399 1 KEY_GREEN GREEN
20:03:40.936 { } Components/ActionMap.py:46 action action -> InfobarSubserviceSelectionActions GreenPressed
20:03:40.991 { } skin.py:1034 readSkin [SKIN] processing screen PluginBrowser:
20:03:41.066 [ ] dvb/epgcache.cpp:1748 abortNonAvail [EPGC] abort non avail schedule other reading
20:03:41.067 [ ] dvb/epgcache.cpp:1772 abortNonAvail [EPGC] abort non avail netmed schedule reading
20:03:41.068 [ ] dvb/epgcache.cpp:1779 abortNonAvail [EPGC] abort non avail netmed schedule other reading
20:03:41.069 [ ] dvb/epgcache.cpp:1788 abortNonAvail [EPGC] abort non avail FreeSat schedule_other reading
20:03:41.070 [ ] dvb/epgcache.cpp:1799 abortNonAvail [EPGC] abort non avail viasat reading
20:03:41.110 { } skin.py:1034 readSkin [SKIN] processing screen PluginBrowserSummary:
20:03:41.127 { } Screens/Screen.py:151 show [SCREENNAME] PluginBrowserSummary
20:03:41.206 { } Screens/Screen.py:151 show [SCREENNAME] PluginBrowser
20:03:41.315 < > dvb/epgcache.cpp:2046 readData [EPGC] nownext
20:03:41.315 [ ] dvb/epgcache.cpp:2087 readData finished(1475604221)
20:03:43.033 [ ] driver/rcinput.cpp:23 handleCode 1 160 1
20:03:43.037 { } Screens/InfoBarGenerics.py:204 actionA KEY: 352 0 KEY_OK OK
20:03:43.038 { } Components/ActionMap.py:46 action action -> SetupActions ok
20:03:43.082 { } skin.py:847 readSkin [SKIN] Parsing embedded skin <embedded-in-'FlashExpander'>
20:03:43.086 { } skin.py:1034 readSkin [SKIN] processing screen <embedded-in-'FlashExpander'>:
20:03:43.096 { } skin.py:1034 readSkin [SKIN] processing screen SimpleSummary:
20:03:43.120 { } Screens/Screen.py:151 show [SCREENNAME] ['FlashExpander_summary', 'SimpleSummary']
20:03:43.137 { } Screens/Screen.py:151 show [SCREENNAME] FlashExpander
20:03:43.139 [ ] driver/rcinput.cpp:23 handleCode 0 160 1
20:03:43.142 { } Screens/InfoBarGenerics.py:204 actionA KEY: 352 1 KEY_OK OK
20:03:44.067 [ ] driver/rcinput.cpp:23 handleCode 1 160 1
20:03:44.070 { } Screens/InfoBarGenerics.py:204 actionA KEY: 352 0 KEY_OK OK
20:03:44.071 { } Components/ActionMap.py:46 action action -> OkCancelActions ok
20:03:44.076 { } Plugins/Extensions/Flashexpander/flashexpander.py:112 __init__ [FlashExpander] device sda
20:03:44.084 { } Components/Harddisk.py:107 __init__ new Harddisk sda -> /dev/sda -> /dev/sda
20:03:44.098 < > dvb/epgcache.cpp:2046 readData [EPGC] schedule
20:03:44.098 [ ] dvb/epgcache.cpp:2087 readData finished(1475604224)
20:03:44.099 [ ] dvb/epgcache.cpp:1537 finishEPG [EPGC] stop caching events
20:03:44.099 [ ] dvb/epgcache.cpp:1539 finishEPG [EPGC] next update in 60 min
20:03:44.806 { } Plugins/Extensions/Flashexpander/flashexpander.py:112 __init__ [FlashExpander] device sdb
20:03:44.813 { } Components/Harddisk.py:107 __init__ new Harddisk sdb -> /dev/sdb -> /dev/sdb
20:03:45.951 { } skin.py:847 readSkin [SKIN] Parsing embedded skin <embedded-in-'FEconf'>
20:03:45.956 { } skin.py:1034 readSkin [SKIN] processing screen <embedded-in-'FEconf'>:
20:03:45.970 { } skin.py:1034 readSkin [SKIN] processing screen SimpleSummary:
20:03:46.001 { } Screens/Screen.py:151 show [SCREENNAME] ['FEconf_summary', 'SimpleSummary']
20:03:46.015 { } Screens/Screen.py:151 show [SCREENNAME] FEconf
20:03:46.021 [ ] driver/rcinput.cpp:23 handleCode 0 160 1
20:03:46.025 { } Screens/InfoBarGenerics.py:204 actionA KEY: 352 1 KEY_OK OK
20:03:46.053 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 65(16)
20:03:46.053 [ ] base/ebase.cpp:290 processOneEvent poll: unhandled POLLERR/HUP/NVAL for fd 68(17)
20:03:47.217 [ ] driver/rcinput.cpp:23 handleCode 1 6c 1
20:03:47.220 { } Screens/InfoBarGenerics.py:204 actionA KEY: 108 0 KEY_DOWN DOWN
20:03:47.387 [ ] driver/rcinput.cpp:23 handleCode 0 6c 1
20:03:47.392 { } Screens/InfoBarGenerics.py:204 actionA KEY: 108 1 KEY_DOWN DOWN
20:03:47.834 [ ] driver/rcinput.cpp:23 handleCode 1 160 1
20:03:47.838 { } Screens/InfoBarGenerics.py:204 actionA KEY: 352 0 KEY_OK OK
20:03:47.839 { } Components/ActionMap.py:46 action action -> OkCancelActions ok
20:03:47.861 { } skin.py:1034 readSkin [SKIN] processing screen MessageBox:
20:03:48.006 { } skin.py:1034 readSkin [SKIN] processing screen MessageBox_summary:
20:03:48.017 { } Screens/Screen.py:151 show [SCREENNAME] ['MessageBox_summary', 'SimpleSummary']
20:03:48.021 { } Screens/Screen.py:151 show [SCREENNAME] ['MessageBox']
20:03:48.023 [ ] driver/rcinput.cpp:23 handleCode 0 160 1
20:03:48.026 { } Screens/InfoBarGenerics.py:204 actionA KEY: 352 1 KEY_OK OK
20:03:48.861 [ ] driver/rcinput.cpp:23 handleCode 1 160 1
20:03:48.865 { } Screens/InfoBarGenerics.py:204 actionA KEY: 352 0 KEY_OK OK
20:03:48.866 { } Components/ActionMap.py:46 action action -> MsgBoxActions ok
20:03:48.873 { } Screens/Screen.py:151 show [SCREENNAME] ['FEconf_summary', 'SimpleSummary']
20:03:48.892 { } Screens/Screen.py:151 show [SCREENNAME] FEconf
20:03:49.754 { } Plugins/Extensions/Flashexpander/flashexpander.py:203 __startFE_device [FlashExpander] /dev/sdb1 UUID=fcfe2dec-551e-d201-70da-0dec551ed201 ext3
20:03:51.170 { D } Traceback (most recent call last):
20:03:51.171 { D } File "/usr/lib/enigma2/python/mytest.py", line 227, in processDelay
20:03:51.173 { D } callback(*retval)
20:03:51.174 { D } File "/usr/lib/enigma2/python/Tools/BoundFunction.py", line 9, in __call__
20:03:51.175 { D } File "/usr/lib/enigma2/python/Plugins/Extensions/Flashexpander/flashexpander.py", line 216, in __startFE_device
20:03:51.176 { D } File "/usr/lib/enigma2/python/Plugins/Extensions/Flashexpander/flashexpander.py", line 236, in __copyFlash
20:03:51.176 { D } File "/usr/lib/enigma2/python/Plugins/Extensions/Flashexpander/flashexpander.py", line 251, in __checkMountPoint
20:03:51.178 { D } NameError: global name 'fstype' is not defined
20:03:51.178 [ E ] python/python.cpp:209 call (PyObject_CallObject(<bound method Session.processDelay of <__main__.Session instance at 0x73a69238>>,()) failed)
]]>
</enigma2crashlog>
</crashlogs>
</openATV>


Wäre schön wenn mir jemand helfen könnte

Gruß
volli

hat sich erledigt, es funktioniert!
 
Zuletzt bearbeitet von einem Moderator:
Und wie hast du es geschafft? Was war die Lösung?
 
Hi,
ich habe den Stick einfach nochmals mit Partitions Wizard in EXT4 formariert, in die Box gesteckt, wurde auch sofort erkannt und gemountet, dann klappte auch das Kopieren vom Flashexpander.
 
hallo

ich wollte heute auch bei meiner dm800HD den flash erweitern mit usb stick nur leider komme ich nicht zum download diese datei
4. flashexpander.py per FTP austauschen

flashexpander.py in

/usr/lib/enigma2/python/Plugins/Extensions/Flashexpander

mit der folgenden flashexpander.py austauschen (Rechte 644)

https://www.digital-eliteboard.com/d...download-6636-flashexpander-mod-oe-2-0-a.html

wenn ich auf den link drücke kommt immer fehler.
das andere habe ich so gemacht wie in der anleitung nur fehlt mir jetzt dieser austausch der datei.
kann jemand helfen
 
Für die Nutzung dieser Website sind Cookies erforderlich. Du musst diese akzeptieren, um die Website weiter nutzen zu können. Erfahre mehr…