Aktuelles
Digital Eliteboard - Das Digitale Technik Forum

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

Registriere dich noch heute kostenlos, um Mitglied zu werden! Sobald du angemeldet bist, kannst du auf unserer Seite aktiv teilnehmen, indem du deine eigenen Themen und Beiträge erstellst und dich über deinen eigenen Posteingang mit anderen Mitgliedern unterhalten kannst! Zudem bekommst du Zutritt zu Bereichen, welche für Gäste verwehrt bleiben

KPCS KPCS Start Problem

    Nobody is reading this thread right now.
AW: KPCS Start Problem

easy2

ja pid file kann aktiv sein
log geht nicht sobald log file einschalte geht nix

kannst mir noch verraten welche baudrate ich bei

ORF - 10 mhz Crypto habe gesehen bei Orf ice hast du bei 8 mhz 21505 - wenn die Formel 9600/3.57*8 mhz = 21512,60
MTV - 10 mhz Conax
SRG via 4.0 - 10 mhz Via

von daher wärs gut wennst mir die richtige sagen könntest weil mit meinem berechnungen gehen die karten nicht


schon ein paar posts oben habe ich diese formel erklärt aber bei ungeraden zahlen stimmt sie nicht zumindest karte wird nd erkannt :(
 
Du musst probieren. Es gibt Karten die laufen mit 10 MHz und andere gehen maximal bis 6. Das die Karten nicht funktionieren hat nicht zu bedeuten das du falsch gerechnet hast.


Sent from my iPhone using Tapatalk
 
AW: KPCS Start Problem

Du musst probieren. Es gibt Karten die laufen mit 10 MHz und andere gehen maximal bis 6. Das die Karten nicht funktionieren hat nicht zu bedeuten das du falsch gerechnet hast.


Sent from my iPhone using Tapatalk

Erklär mir mal anhand von orf ice wie du auf 21505 gekommen bist bitte.
 
AW: KPCS Start Problem

Hi
I have this configurat in my KPCS
[global]
Nice = -5
ClientTimeout = 3
ClientMaxIdle = 600
CacheDelay = 0
FallbackTimeout = 1
BindWait = 10
ResolveDelay = 10
DyndnsInterval = 120
#LogFile = stdout
LogFile = /tmp/kpcs.log
PidFile = /tmp/my.pid
MaxLogSize = 10240
showecmdw = 0
showemmdw = 0
Filter = 1500
ReaderAlarm = 1
serialreadertimeout=4
WaitCards = 0

and i have yhis mesage in log:
2011/03/13 21:54:45 [ cs0011 ] Connection closed to client
2011/03/13 21:54:45 [ cs0011 ] newcamd: xxxx disconnected from 127.0.0.1
2011/03/13 21:54:45 [ cs0009 ] duplicate user 'nuri', but same IP (127.0.0.1)

it is ok or not

wer i have put this
ClientMaxIdle = 60
Ewry thing is disconect

plase help me this problem it is in N to N line newcamed protocol
 
AW: KPCS Start Problem

[global]
Nice = -1
ClientTimeout = 6
ClientMaxIdle = 60
CacheDelay = 0
FallbackTimeout = 1
BindWait = 10
ResolveDelay = 10
DyndnsInterval = 120
#LogFile = stdout
LogFile = /tmp/kpcs1.log
PidFile = /tmp/my.pid
MaxLogSize = 10240
showecmdw = 0
showemmdw = 0
Filter = 1500
ReaderAlarm = 1
serialreadertimeout=4
WaitCards=0

[newcamd]
Key = 0102030405060708091011121314
Port = xxx@1702:0
 
AW: KPCS Start Problem

in this configuration i have this error,plase help me it is newcamed protocol


2011/03/17 16:45:25 [ p 0002 ] connect(xxxxxxx:11112) failed: (errno=114)
2011/03/17 16:45:25 [ p 0004 ] connect(xxxxxxxx:22222) failed: (errno=114)
2011/03/17 16:45:25 [ p 0005 ] connect(xxxxxxx:34020) failed: (errno=114)
2011/03/17 16:45:25 [ p 0003 ] connect(xxxxxxx:34003) failed: (errno=114)
2011/03/17 16:45:30 [ p 0002 ] connect(xxxxxxx:34037) failed: (errno=114)
2011/03/17 16:45:30 [ p 0004 ] connect(xxxxxxx:34004) failed: (errno=114)
2011/03/17 16:45:30 [ p 0005 ] connect(xxxxxxxx:34020) failed: (errno=114)
2011/03/17 16:45:30 [ p 0003 ] connect(xxxxxxx:34003) failed: (errno=114)
 
AW: KPCS Start Problem

problem is not the config nor the reader... it's just a protection because there is a keygen for kpcs versions up to 1.1.12

HDTV you'll get a new serial number during the evening...
 
AW: KPCS Start Problem

problem is not the config nor the reader... it's just a protection because there is a keygen for kpcs versions up to 1.1.12

HDTV you'll get a new serial number during the evening...

I have original KPCS and i install fresh debian after this KPCS dond start in komand killall -9 kpcs and i have this mesage kpcs: no process killed,
plase help me to start kpcs

thenk you
 
AW: KPCS Start Problem

hello..

you also have the original key? that would have to look at, unfortunately require money for support....
 
AW: KPCS Start Problem

hello..

you also have the original key? that would have to look at, unfortunately require money for support....


Yes i have original key from ivan krezy ,meby i dond have instal driver fore HWDI .
and i like to start with caomanbde /var/kpcs/monitor_card enter
mesage is
var/kpcs/monitor_card: line 12: 4417 Segmentation fault /var/kpcs/kpcs -c /var/kpcs
kpcs: no process killed
Cannot create shared memory (errno=22)
/var/kpcs/monitor_card: line 12: 4421 Segmentation fault /var/kpcs/kpcs -c /var/kpcs
kpcs: no process killed
plase help me for this
ps cen i inatll hwid driveer or hardv.
 
AW: KPCS Start Problem

Hi Dr. Key,
what`s your System ... Ubuntu..9.04 or 10.10 or other?
Check follow`s:
1. kernel.shmmax = 2147483648 (on etc/sysctl.conf)
2. Way to your monitor_card ( on etc/rc.local ) like this:
/var/kpcs1/monitor_card1 &

3. Restart the server (shutdown -r now)
4. check with Putty root@kpcs:~# ps -ax the Device is started, like this :

1119 ? S<l 0:15 /var/kpcs1/kpcs1 -c /var/kpcs1
-------------
Look at the .log File and post it here.......(xxx the ATR!)
-------
So long...........
 
AW: KPCS Start Problem

Hi Dr. Key,
what`s your System ... Ubuntu..9.04 or 10.10 or other?
Check follow`s:
1. kernel.shmmax = 2147483648 (on etc/sysctl.conf)
2. Way to your monitor_card ( on etc/rc.local ) like this:
/var/kpcs1/monitor_card1 &

3. Restart the server (shutdown -r now)
4. check with Putty root@kpcs:~# ps -ax the Device is started, like this :

1119 ? S<l 0:15 /var/kpcs1/kpcs1 -c /var/kpcs1
-------------
Look at the .log File and post it here.......(xxx the ATR!)
-------
So long...........
----------------------------

Next:
Try the "Segmentcheck":>strace<
root@kpcs:~# strace /var/kpcs1/kpcs1 < Way to your kpcs and Post it here... like this:

execve("/var/kpcs1/kpcs1", ["/var/kpcs1/kpcs1"], [/* 17 vars */]) = 0
old_mmap(0xc2e000, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0xbfc418a40961e018) = 0xc2e000
readlink("/proc/self/exe", "/var/kpcs1/kpcs1", 4096) = 16
old_mmap(0x8048000, 366671, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0xbfc3fdcc0961e018) = 0x8048000
mprotect(0x8048000, 366668, PROT_READ|PROT_EXEC) = 0
old_mmap(0x80a2000, 2679, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0xbfc3fdcc0961e018) = 0x80a2000
mprotect(0x80a2000, 2676, PROT_READ|PROT_WRITE) = 0
old_mmap(0x80a3000, 674112, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0xbfc3fdcc0961e018) = 0x80a3000
brk(0x8148000) = 0x95b9000
open("/lib/ld-linux.so.2", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0P\10\0\0004\0\0\0"..., 512) = 512
old_mmap(NULL, 122880, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0xbfc3fdd40961e018) = 0xb76f8000
old_mmap(0xb76f8000, 113636, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3, 0xbfc3fdd40961e018) = 0xb76f8000
old_mmap(0xb7714000, 6232, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED, 3, 0xbfc3fdd40961e018) = 0xb7714000
close(3) = 0
munmap(0xc02000, 184320) = 0
brk(0) = 0x95b9000
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
mmap2(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb76f6000
access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=13194, ...}) = 0
mmap2(NULL, 13194, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb76f2000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/libpthread.so.0", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\360L\0\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=121578, ...}) = 0
mmap2(NULL, 102920, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb76d8000
mprotect(0xb76ed000, 4096, PROT_NONE) = 0
mmap2(0xb76ee000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x15) = 0xb76ee000
mmap2(0xb76f0000, 4616, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb76f0000
close(3) = 0
access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory)
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0@n\1\0004\0\0\0"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1421892, ...}) = 0
mmap2(NULL, 1431976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb757a000
mprotect(0xb76d1000, 4096, PROT_NONE) = 0
mmap2(0xb76d2000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x157) = 0xb76d2000
mmap2(0xb76d5000, 10664, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb76d5000
close(3) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7579000
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7578000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb75786c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xb76d2000, 8192, PROT_READ) = 0
mprotect(0xb76ee000, 4096, PROT_READ) = 0
mprotect(0xb7714000, 4096, PROT_READ) = 0
munmap(0xb76f2000, 13194) = 0
set_tid_address(0xb7578728) = 1892
set_robust_list(0xb7578730, 0xc) = 0
futex(0xbfc407f0, FUTEX_WAKE_PRIVATE, 1) = 0
futex(0xbfc407f0, FUTEX_WAIT_BITSET_PRIVATE|FUTEX_CLOCK_REALTIME, 1, NULL, bfc40800) = -1 EAGAIN (Resource temporarily unavailable)
rt_sigaction(SIGRTMIN, {0xb76dc6e0, [], SA_SIGINFO}, NULL, 8) = 0
rt_sigaction(SIGRT_1, {0xb76dcbc0, [], SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
uname({sys="Linux", node="kpcs", ...}) = 0
shmget(IPC_PRIVATE, 38659164, IPC_CREAT|0600) = 229383
shmat(229383, 0, 0) = 0xb5099000
shmctl(229383, IPC_64|IPC_RMID, 0xbfc3f8a4) = 0
time(NULL) = 1301327724
getpriority(PRIO_PROCESS, 0) = 20
brk(0) = 0x95b9000
brk(0x95da000) = 0x95da000
open("./kpcs.conf", O_RDONLY) = -1 ENOENT (No such file or directory)
write(2, "Cannot open config file './kpcs."..., 48Cannot open config file './kpcs.conf' (errno=2)
) = 48
exit_group(1)
 
Zurück
Oben